Excitation Density Dependent Photoluminescence Studies on Homo-Epitaxial GaN Nanowall Networks Grown by Laser Assisted Molecular Beam Epitaxy

The optical properties of laser-assisted molecular beam epitaxy grown homo-epitaxialGaN nanowall networks (NWNs) were investigated using power dependent photoluminescence (PL) spectroscopy and compared with homo-epitaxial GaN thin film. The pore size and tip width of GaN NWN sample is ˜120-180 nm and 10-15 nm, respectively. The ultraviolet-visible spectroscopy study shows that the GaN NWNs have low optical light reflection and minimum Fabry-Perot cavity effect than GaN film. The room temperature PL spectroscopy reveals that the GaN NWNs possesses enhanced band gap of 3.51 eV with blue shift of 90 meV than the GaN film (3.42 eV). The excitation density dependent PL spectroscopy measurements reveal that the GaN NWNs nanowall and near band emission (NBE) peak position and its linewidth invariant. The intensity of NBE peak for GaN film and nanowalls varies linearly whereas NBE to defect related yellow luminescence peak intensity ratio shows a non-linear variation on the excitation density. The excitation density in PL measurements plays a key role when the sample quality compared on the basis of PL data.

Self-Induced Growth of GaN Nanowall Structure on Si (111) by Laser Molecular Beam Epitaxy

Evolution of GaN nanostructure grown on Si (111) substrate has been studied systematically using laser molecular beam epitaxial process. The in-situ reflection high energy electron diffraction and ex-situ high resolution X-ray diffraction studies reveal that the GaN nanostructures have a hexagonal-wurtzite phase and grow along c-axis. The GaN morphology changes from compact granular layer to faceted pyramids to nanowall structure as a function of laser ablation frequency of the KrF excimer laser and radio frequency nitrogen plasma condition. It is observed that GaN nanowall structure is formed on Si (111) when grown under strong nitrogen-rich flux at a higher growth rate and growth temperature. The crystalline and optical quality of the GaN nanostructures significantly improved with increase of laser ablation frequency. The nanowall structure shows good optical emission properties with an intense, sharp near-band edge emission and a negligible deep band luminescence.

Effect of surface modification and laser repetition rate on growth, structural, electronic and optical properties of GaN nanorods on flexible Ti metal foil

The effect of flexible Ti metal foil surface modification and laser repetition rate in laser molecular beam epitaxy growth process on the evolution of GaN nanorods and their structural, electronic and optical properties has been investigated. The GaN nanostructures were grown on bare- and pre-nitridated Ti foil substrates at 700 °C for different laser repetition rates (10–30 Hz). It is found that the low repetition rate (10 Hz) promotes sparse growth of three-dimensional inverted-cone like GaN nanostructures on pre-nitridated Ti surface whereas the entire Ti foil substrate is nearly covered with film-like GaN consisting of large-sized grains for 30 Hz growth. In case of the GaN growth at 20 Hz, uniformly-aligned, dense (∼8 × 10⁹ cm⁻²) GaN nanorods are successfully grown on pre-nitridated Ti foil whereas sparse vertical GaN nanorods have been obtained on bare Ti foil under similar growth conditions for both 20 and 30 Hz. X-ray photoemission spectroscopy (XPS) has been utilized to elucidate the electronic structure of GaN nanorods grown under various experimental conditions on Ti foil. It confirms Ga–N bonding in the grown structures, and the calculated chemical composition turns out to be Ga rich for the GaN nanorods grown on pre-nitridated Ti foil. For bare Ti substrates, a preferred reaction between Ti and N is noticed as compared to Ga and N leading to sparse growth of GaN nanorods. Hence, the nitridation of Ti foil is a prerequisite to achieve the growth of dense and aligned GaN nanorod arrays. The X-ray diffraction, high resolution transmission electron microscopy and Raman studies revealed the c-axis growth of wurtzite GaN nanorods on Ti metal foil with good crystallinity and structural quality. The photoluminescence spectroscopy showed that the dense GaN nanorod possesses a near band edge emission at 3.42 eV with a full width at half maximum of 98 meV at room temperature. The density-controlled growth of GaN nanorods on a flexible substrate with high structural and optical quality holds promise for potential applications in futuristic flexible GaN based optoelectronics and sensor devices.

The effect of flexible Ti metal foil surface modification and laser repetition rate in laser molecular beam epitaxy growth process on the evolution of GaN nanorods and their structural, electronic and optical properties has been investigated.

Laser molecular beam epitaxy of vertically self-assembled GaN nanorods on Ta metal foil: role of growth temperature and laser repetition rate

Self-aligned GaN nanorod assembly directly grown on metal foil substrates is very attractive for developing flexible devices.

Facile Synthesis of Semiconducting Ultrathin Layer of Molybdenum Disulfide

In this paper, we have reported a simple and efficient method for the synthesis of uniform, highly conducting single or few layer molybdenum disulfide (MoS2) on large scale. Scanning Electron Microscopy (SEM) and High Resolution Transmission Electron Microscopy (HRTEM) have been used for the confirmation of mono or few layered nature of the as-synthesized MoS2 sheets. X-ray Photoelectron Spectroscopy (XPS), X-Ray Diffraction (XRD) and Raman Spectroscopy have also been used to study the elemental, phase, and molecular composition of the sample. Optical properties of as-synthesized sample have been probed by measuring absorption and photoluminescence spectra which also compliment the formation of mono and few layers MoS2 Current-voltage (I-V ) characteristics of as-synthesized sample in the pellet form reveal that MoS2 sheets have an ohmic character and found to be highly conducting. Besides characterizing the as-synthesized sample, we have also proposed the mechanism and factors which play a decisive role in formation of high quality MoS2 sheets.

Structural, optical and electronic properties of homoepitaxial GaN nanowalls grown on GaN template by laser molecular beam epitaxy

We have grown homoepitaxial GaN nanowall networks on GaN template using an ultra-high vacuum laser assisted molecular beam epitaxy system by ablating solid GaN target under a constant r.f. nitrogen plasma ambient.

Shape-controlled growth of indium and aluminum nanostructures on MoS2(0001)

The growth of indium and aluminum nanostructures on molybdenum disulphide (MoS2)(0001) substrate has been studied using scanning tunneling microscopy in ultra-high vacuum. At low coverage and room temperature (RT), mostly ultra-thin (approximately 1.2-2 nm) triangular In islands were observed on MoS2. With increasing coverage or high flux, large coalesced irregular islands along with triangular and round-shaped ones of increased average height were found. Triangular and round-shaped islands were obtained after annealing the RT-deposited In on MoS2 sample at 450 K. At approximately 375 K, exclusively triangular In islands were observed. Al nanoparticles with diameter in 4-16 nm range were obtained after a low-flux deposited whereas ramified islands were observed in a high flux at RT. Ultra-thin (approximately 1.20-2 nm) Al islands and films were obtained on MoS2 after deposition at 500 K. These results demonstrate that the shape of In and Al nanostructures grown on MoS2 can be controlled in self-assembly by adjusting substrate temperature, deposition flux and amount.