Structure-specificity relationships of an intracellular xylanase from Geobacillus stearothermophilus

Geobacillus stearothermophilus T-6 is a thermophilic Gram-positive bacterium that produces two selective family 10 xylanases which both take part in the complete degradation and utilization of the xylan polymer. The two xylanases exhibit significantly different substrate specificities. While the extracellular xylanase (XT6; MW 43.8 kDa) hydrolyzes the long and branched native xylan polymer, the intracellular xylanase (IXT6; MW 38.6 kDa) preferentially hydrolyzes only short xylo-oligosaccharides. In this study, the detailed three-dimensional structure of IXT6 is reported, as determined by X-ray crystallography. It was initially solved by molecular replacement and then refined at 1.45 A resolution to a final R factor of 15.0% and an R(free) of 19.0%. As expected, the structure forms the classical (alpha/beta)(8) fold, in which the two catalytic residues (Glu134 and Glu241) are located on the inner surface of the central cavity. The structure of IXT6 was compared with the highly homologous extracellular xylanase XT6, revealing a number of structural differences between the active sites of the two enzymes. In particular, structural differences derived from the unique subdomain in the carboxy-terminal region of XT6, which is completely absent in IXT6. These structural modifications may account for the significant differences in the substrate specificities of these otherwise very similar enzymes.

Biochemical characterization and identification of catalytic residues in alpha-glucuronidase from Bacillus stearothermophilus T-6

Alpha-D-glucuronidases cleave the alpha-1,2-glycosidic bond of the 4-O-methyl-D-glucuronic acid side chain of xylan, as a part of an array of xylan hydrolyzing enzymes. The alpha-D-glucuronidase from Bacillus stearothermophilus T-6 was overexpressed in Escherichia coli using the T7 polymerase expression system. The purification procedure included two steps, heat treatment and gel filtration chromatography, and provided over 0.3 g of pure enzyme from 1 L of overnight culture. Based on gel filtration, the native protein is comprised of two identical subunits. Kinetic constants with aldotetraouronic acid as a substrate, at 55 degrees C, were a Km of 0.2 mM, and a specific activity of 42 U x mg(-1) (kcat = 54.9 s(-1)). The enzyme was most active at 65 degrees C, pH 5.5-6.0, in a 10-min assay, and retained 100% of its activity following incubation at 70 degrees C for 20 min. Based on differential scanning calorimetry, the protein denatured at 73.4 degrees C. Truncated forms of the enzyme, lacking either 126 amino acids from its N-terminus or 81 amino acids from its C-terminus, exhibited low residual activity, indicating that the catalytic site is located in the central region of the protein. To identify the potential catalytic residues, site-directed mutagenesis was applied on highly conserved acidic amino acids in the central region. The replacements Glu392-->Cys and Asp364-->Ala resulted in a decrease in activity of about five orders of magnitude, suggesting that these residues are the catalytic pair.

Stereochemistry of family 52 glycosyl hydrolases: a beta-xylosidase from Bacillus stearothermophilus T-6 is a retaining enzyme

A beta-xylosidase from Bacillus stearothermophilus T-6 assigned to the uncharacterized glycosyl hydrolase family 52 was cloned, overexpressed in Escherichia coli and purified. The enzyme showed maximum activity at 65 degrees C and pH 5.6-6.3. The stereochemistry of the hydrolysis of p-nitrophenyl beta-D-xylopyranoside was followed by 1H-nuclear magnetic resonance. Time dependent spectrum analysis showed that the configuration of the anomeric carbon was retained, indicating that a retaining mechanism prevails in family 52 glycosyl hydrolases. Sequence alignment and site-directed mutagenesis enabled the identification of functionally important amino acid residues of which Glu337 and Glu413 are likely to be the two key catalytic residues involved in enzyme catalysis.

Glutamic acid 160 is the acid-base catalyst of beta-xylosidase from Bacillus stearothermophilus T-6: a family 39 glycoside hydrolase

A beta-xylosidase from Bacillus stearothermophilus T-6 was cloned, overexpressed in Escherichia coli and purified to homogeneity. Based on sequence alignment, the enzyme belongs to family 39 glycoside hydrolases, which itself forms part of the wider GH-A clan. The conserved Glu160 was proposed as the acid-base catalyst. An E160A mutant was constructed and subjected to steady state and pre-steady state kinetic analysis together with azide rescue and pH activity profiles. The observed results support the assignment of Glu160 as the acid-base catalytic residue.

Crystallization and preliminary X-ray analysis of an intracellular xylanase from Bacillus stearothermophilus T-6

Xylanases (1,4-beta-D-xylan xylanhydrolases; E.C. 3.2.1.8) hydrolyze the 1,4-beta-D-xylopyranosyl linkage of xylans. The structural characterization of xylanase active sites is of great interest, since it can lead to a better understanding of their catalytic mechanism and contribute significant knowledge to the rational design of specific oligosaccharide-binding sites via protein engineering. An intracellular xylanase gene (xynA2) from Bacillus stearothermophilus T-6 has recently been cloned and sequenced. The xynA2 gene encodes for an intracellular enzyme (IXT6) of 331 amino acids, with a calculated molecular weight of 38 639 Da and a pI of 5.72. Based on sequence homology, the enzyme belongs to family 10 of the glycosyl hydrolases. The xynA2 gene product (IXT6) was overproduced in Escherichia coli and purified to homogeneity. Crystallographic studies of IXT6 were initiated in order to study the specificity and mechanism of catalysis of this unique xylanase, as well as to provide a structural basis for rational introduction of enhanced thermostability by site-specific mutagenesis. The M1 crystal form was found to be the most suitable for detailed crystal structure analysis. These crystals belong to a C--centered monoclinic crystal system (space group C2) with unit-cell parameters a = 170.6, b = 82.5, c = 80.0 A, beta = 91.43 degrees. They are mechanically strong, are fairly stable in the X-ray beam and diffract X--rays to better than 2.5 A resolution. A full 2.9 A resolution diffraction data set (97.9% completeness, R(merge) = 8.4%) has recently been collected from one crystal at room temperature using X-ray synchrotron radiation (lambda = 1.125 A) and a MAR300 imaging-plate area detector. A comparable 2.5 A data set was measured at 90 K using a rotating-anode X-ray source and an R-AXIS IIc imaging-plate area detector (97.2% completeness, R(merge) = 6.9%). Molecular-replacement studies and multiple anomalous dispersion (MAD) experiments are currently in progress in order to determine the detailed three-dimensional structure of IXT6.

The glucuronic acid utilization gene cluster from Bacillus stearothermophilus T-6

A lambda-EMBL3 genomic library of Bacillus stearothermophilus T-6 was screened for hemicellulolytic activities, and five independent clones exhibiting beta-xylosidase activity were isolated. The clones overlap each other and together represent a 23.5-kb chromosomal segment. The segment contains a cluster of xylan utilization genes, which are organized in at least three transcriptional units. These include the gene for the extracellular xylanase, xylanase T-6; part of an operon coding for an intracellular xylanase and a beta-xylosidase; and a putative 15.5-kb-long transcriptional unit, consisting of 12 genes involved in the utilization of alpha-D-glucuronic acid (GlcUA). The first four genes in the potential GlcUA operon (orf1, -2, -3, and -4) code for a putative sugar transport system with characteristic components of the binding-protein-dependent transport systems. The most likely natural substrate for this transport system is aldotetraouronic acid [2-O-alpha-(4-O-methyl-alpha-D-glucuronosyl)-xylotriose] (MeGlcUAXyl3). The following two genes code for an intracellular alpha-glucuronidase (aguA) and a beta-xylosidase (xynB). Five more genes (kdgK, kdgA, uxaC, uxuA, and uxuB) encode proteins that are homologous to enzymes involved in galacturonate and glucuronate catabolism. The gene cluster also includes a potential regulatory gene, uxuR, the product of which resembles repressors of the GntR family. The apparent transcriptional start point of the cluster was determined by primer extension analysis and is located 349 bp from the initial ATG codon. The potential operator site is a perfect 12-bp inverted repeat located downstream from the promoter between nucleotides +170 and +181. Gel retardation assays indicated that UxuR binds specifically to this sequence and that this binding is efficiently prevented in vitro by MeGlcUAXyl3, the most likely molecular inducer.

Crystallization and preliminary X-ray analysis of alpha-D-glucuronidase from Bacillus stearothermophilus T-6

alpha-D-Glucuronidases cleave the alpha-1,2-glycosidic bond of the 4-O-methyl-alpha-D-glucuronic acid side chain in xylan. Of the xylan-debranching hydrolases, these enzymes are the least studied and characterized. The alpha-glucuronidase gene (aguA) from Bacillus stearothermophilus T-6 has been cloned, sequenced and overproduced in Escherichia coli. The gene encodes for a protein of 679 amino acids with a calculated molecular weight of 78480 and a pI of 5.42. alpha-Glucuronidase T-6 shows high homology to the alpha-glucuronidases of Thermotoga maritima (60% identity) and of Tri-choderma reesei (44% identity). Based on the amino-acid sequence similarity, it is likely that these enzymes represent a new class of glycosyl hydrolases. Crystallographic studies of alpha-glucuronidase T-6 were initiated to study the mechanism of catalysis, as well as to provide a structural basis for rational introduction of enhanced thermostability by site-specific mutagenesis. In this report, the crystallization and preliminary crystallographic characterization of the native alpha-glucuronidase T-6 enzyme is described. Two crystal forms were found suitable for detailed crystal structure analysis. The T1 form was obtained by the vapour-diffusion method using PEG 4000 as a precipitant and 2-propanol as an organic additive. The crystals belong to a primitive tetragonal crystal system (space group P41212 or P43212) with unit-cell dimensions a = b = 76.1 and c = 331.2 A. These crystals are mechanically strong, are stable in the X--ray beam and diffract X-rays to better than 2.4 A resolution. A full 3.0 A resolution diffraction data set (97.3% completeness, Rmerge 9.8%) has recently been collected on one crystal at room temperature using a rotating-anode X-ray source and an R-AXIS IIc imaging-plate detector. The M1 form was obtained and characterized by similar techniques. The best crystallization occurred at a slightly lower pH and a lower concentration of 2-propanol. The crystals belong to a primitive monoclinic crystal system (space group P21) with unit-cell dimensions a = 65.8, b = 127.4, c = 96.6 A and beta = 97.9 degrees. These crystals are also quite strong and stable, and diffract to better than 2.8 A resolution. A full 2.8 A resolution diffraction data set (96.2% completeness, Rmerge 7.6%) has recently been collected on one crystal at room temperature using the same R-AXIS IIc setup. Both forms are currently being used to obtain crystallographic phasing via isomorphous heavy-atom derivatives and selenomethionine MAD experiments.