Broadband luminescence in defect-engineered electrochemically produced porous Si/ZnO nanostructures

The fabrication, by an all electrochemical process, of porous Si/ZnO nanostructures with engineered structural defects, leading to strong and broadband deep level emission from ZnO, is presented. Such nanostructures are fabricated by a combination of metal-assisted chemical etching of Si and direct current electrodeposition of ZnO. It makes the whole fabrication process low-cost, compatible with Complementary Metal-Oxide Semiconductor technology, scalable and easily industrialised. The photoluminescence spectra of the porous Si/ZnO nanostructures reveal a correlation between the lineshape, as well as the strength of the emission, with the morphology of the underlying porous Si, that control the induced defects in the ZnO. Appropriate fabrication conditions of the porous Si lead to exceptionally bright Gaussian-type emission that covers almost the entire visible spectrum, indicating that porous Si/ZnO nanostructures could be a cornerstone material towards white-light-emitting devices.

Bi-component semiconductor oxide photoanodes for the photoelectrocatalytic oxidation of organic solutes and vapours: a short review with emphasis to TiO2-WO3 photoanodes

The use of binary semiconductor oxide anodes for the photoelectrocatalytic oxidation of organic species (both in solution and gas phase) is reviewed. In the first part of the review, the principle of electrically assisted photocatalysis is presented, the preparation methods for the most common semiconductor oxide catalysts are briefly mentioned, while the advantages of appropriately chosen semiconductor combinations for efficient UV and visible (vis) light utilization are highlighted. The second part of the review focuses on the discussion of TiO(2)-WO(3) photoanodes (among the most studied bi-component semiconductor oxide systems) and in particular on coatings prepared by electrodeposition/electrosynthesis or powder mixtures (the focus of the authors' research during recent years). Studies concerning the microscopic, spectroscopic and photoelectrochemical characterization of the catalysts are presented and examples of photoanode activity towards typical dissolved organic contaminants as well as organic vapours are given. Particular emphasis is paid to: (a) The dependence of photoactivity on catalyst morphology and composition and (b) the possibility of carrying out photoelectrochemistry in all-solid cells, thus opening up the opportunity for photoelectrocatalytic air treatment.

Optimal conditions for the direct RP-HPLC determination of underivatized amino acids with online multiple detection

The combined use of a dual-UV detector as well as a fluorimetric and a multielectrode electrochemical detector (equipped with a dual electrode, consisting of a conventional size 3 mm diameter glassy carbon electrode (GCE) and of a pair of 30 μm thick carbon microfibers) is proposed for the detection of the following 15 underivatized amino acids: L: -histidine (his), L: -cysteine (cys), creatine (crn), S-methyl-L: -cysteine (me-cys), DL: -homocysteine (hcy), L: -methionine (met), beta-(3,4-dihydroxyphenyl)-L: -alanine (dopa), L: -tyrosine (tyr), DL: -m-tyrosine (m-tyr), L: -a-methyl-dopa (me-dopa), L: -phenylanine (phe), DL: -alpha-methyltyrosine (me-tyr), 5-hydroxy-tryptophan (5htp), 3-nitro-L: -tyrosine (NO(2)Tyr) and L: -tryptophan (trp), as well as of two dipeptides: L: -cystathionine (cysta), L: -carnosine (car), and of creatinine (cre). A multilinear solvent (acetonitrile) gradient elution program, determined by a simple optimization algorithm, is required for the efficient reversed phase separation of the above mixture of 18 solutes within 27 min at a flow rate of 1.0 mL/min and at 25°C.

Anodic stripping voltammetry at a new type of disposable bismuth-plated carbon paste mini-electrodes

A new type of disposable carbon paste mini-electrodes (CPmEs), with dimensions in the 50-300 microm range, have been fabricated by heat-shrinking the end-tip of plastic micropipette tips and filling them with carbon paste. The CPmEs have been characterized by microscopic and electrochemical means and tested as substrates for in situ plated Bi film electrodes (BiF-CPmEs), used in the determination of heavy metals by square wave anodic stripping voltammetry (SWASV). It was found that this new class of CPmEs combines the advantages of carbon paste electrodes (readily renewable surface and high surface area) with those of near-microelectrode behaviour (no stirring or electrolyte excess needed). During SWASV experiments in unstirred Pb(II) and Cd(II) solutions well-shaped stripping peaks were obtained whose height varied linearly with analyte concentration in the wide 1x10(-8) to 10(-6) M range, both in acetate buffer and unbuffered solutions. Under optimal conditions detection limits of 8x10(-10) and 1.3x10(-9) M were achieved for Pb(II) and Cd(II), respectively and in a trial application, these metal ions have been determined in a spiked tap water sample using a BiF-CPmE.

Anodic stripping voltammetry at in situ bismuth-plated carbon and gold microdisc electrodes in variable electrolyte content unstirred solutions

Carbon and gold microdisc electrodes (30 and 10 microm, respectively) have been tested as substrates for in situ bismuth film plating from unstirred solutions of variable acetate buffer content and were subsequently used in the anodic stripping voltammetry determination of Pb(II) and Cd(II) ions. The effects of Bi(III) concentration, analyte accumulation time, stirring as well as supporting electrolyte content have been studied. Under optimal conditions good voltammetric responses were obtained by means of square wave anodic stripping voltammetry in unstirred analyte solutions of 5 x 10(-8) to 10(-6)M, even in the absence of added buffer. In an indicative application, Pb(II) ion levels were determined in tap water using bismuth-plated carbon microdisc electrodes.

Study on the electrochemical detection of the macrolide antibiotics clarithromycin and roxithromycin in reversed-phase high-performance liquid chromatography

The optimal conditions of the amperometric detection of the macrolide antibiotics clarithromycin and roxithromycin were found by cyclic voltammetric studies and HPLC-electrochemical detection responses obtained in different temperatures (25.5-60 degrees C) and different but almost isoelutropic binary, ternary and quaternary mixtures of aqueous buffer (pH 7), methanol, acetonitrile and isopropanol. These conditions were also proved to be applicable for the quantitative detection of clarithromycin in human plasma using roxithromycin as an internal standard and vice versa. It was demonstrated that increased attention has to be paid to eluent composition and column temperature to ensure sensitive and reproducible electrochemical responses as well as regularly shaped peaks for both macrolides tested.

Differentiation between postoperative scar and recurrent disk herniation: prospective comparison of MR, CT, and contrast-enhanced CT

Twenty-five symptomatic postlumbar surgery patients had findings on lumbar spinal noncontrast CT that were equivocal for distinguishing recurrent disk herniation from postoperative epidural fibrosis (scar). Contrast-enhanced CT and lumbar MR imaging were performed to differentiate these two conditions. Of the 14 levels, surgically explored, the diagnosis of scar or recurrent disk herniation was correct with contrast-enhanced CT at 10 levels and with MR imaging at 11 levels. At the levels operated on less than 2 years prior to MR imaging, scar more frequently demonstrated intermediate than low signal intensity. Scar older than 2 years most often showed low signal intensity. These preliminary findings suggest that MR may be useful in differentiating postoperative fibrosis from recurrent disk herniation in a significant proportion of patients whose unenhanced CT scans are equivocal.