Tunable sieving of ions using graphene oxide membranes

Graphene oxide membranes show exceptional molecular permeation properties, with promise for many applications. However, their use in ion sieving and desalination technologies is limited by a permeation cutoff of ∼9 Å (ref. 4), which is larger than the diameters of hydrated ions of common salts. The cutoff is determined by the interlayer spacing (d) of ∼13.5 Å, typical for graphene oxide laminates that swell in water. Achieving smaller d for the laminates immersed in water has proved to be a challenge. Here, we describe how to control d by physical confinement and achieve accurate and tunable ion sieving. Membranes with d from ∼9.8 Å to 6.4 Å are demonstrated, providing a sieve size smaller than the diameters of hydrated ions. In this regime, ion permeation is found to be thermally activated with energy barriers of ∼10-100 kJ mol^-1 depending on d. Importantly, permeation rates decrease exponentially with decreasing sieve size but water transport is weakly affected (by a factor of <2). The latter is attributed to a low barrier for the entry of water molecules and large slip lengths inside graphene capillaries. Building on these findings, we demonstrate a simple scalable method to obtain graphene-based membranes with limited swelling, which exhibit 97% rejection for NaCl.

Vertical field-effect transistor based on graphene-WS2 heterostructures for flexible and transparent electronics

The celebrated electronic properties of graphene have opened the way for materials just one atom thick to be used in the post-silicon electronic era. An important milestone was the creation of heterostructures based on graphene and other two-dimensional crystals, which can be assembled into three-dimensional stacks with atomic layer precision. Such layered structures have already demonstrated a range of fascinating physical phenomena, and have also been used in demonstrating a prototype field-effect tunnelling transistor, which is regarded to be a candidate for post-CMOS (complementary metal-oxide semiconductor) technology. The range of possible materials that could be incorporated into such stacks is very large. Indeed, there are many other materials with layers linked by weak van der Waals forces that can be exfoliated and combined together to create novel highly tailored heterostructures. Here, we describe a new generation of field-effect vertical tunnelling transistors where two-dimensional tungsten disulphide serves as an atomically thin barrier between two layers of either mechanically exfoliated or chemical vapour deposition-grown graphene. The combination of tunnelling (under the barrier) and thermionic (over the barrier) transport allows for unprecedented current modulation exceeding 1 × 10(6) at room temperature and very high ON current. These devices can also operate on transparent and flexible substrates.

Light-emitting diodes by band-structure engineering in van der Waals heterostructures

The advent of graphene and related 2D materials has recently led to a new technology: heterostructures based on these atomically thin crystals. The paradigm proved itself extremely versatile and led to rapid demonstration of tunnelling diodes with negative differential resistance, tunnelling transistors, photovoltaic devices and so on. Here, we take the complexity and functionality of such van der Waals heterostructures to the next level by introducing quantum wells (QWs) engineered with one atomic plane precision. We describe light-emitting diodes (LEDs) made by stacking metallic graphene, insulating hexagonal boron nitride and various semiconducting monolayers into complex but carefully designed sequences. Our first devices already exhibit an extrinsic quantum efficiency of nearly 10% and the emission can be tuned over a wide range of frequencies by appropriately choosing and combining 2D semiconductors (monolayers of transition metal dichalcogenides). By preparing the heterostructures on elastic and transparent substrates, we show that they can also provide the basis for flexible and semi-transparent electronics. The range of functionalities for the demonstrated heterostructures is expected to grow further on increasing the number of available 2D crystals and improving their electronic quality.

Production of few-layer phosphorene by liquid exfoliation of black phosphorus

We report the liquid exfoliation of black phosphorus to form few-layer phosphorene nanosheets.

Cross-sectional imaging of individual layers and buried interfaces of graphene-based heterostructures and superlattices

By stacking various two-dimensional (2D) atomic crystals on top of each other, it is possible to create multilayer heterostructures and devices with designed electronic properties. However, various adsorbates become trapped between layers during their assembly, and this not only affects the resulting quality but also prevents the formation of a true artificial layered crystal upheld by van der Waals interaction, creating instead a laminate glued together by contamination. Transmission electron microscopy (TEM) has shown that graphene and boron nitride monolayers, the two best characterized 2D crystals, are densely covered with hydrocarbons (even after thermal annealing in high vacuum) and exhibit only small clean patches suitable for atomic resolution imaging. This observation seems detrimental for any realistic prospect of creating van der Waals materials and heterostructures with atomically sharp interfaces. Here we employ cross sectional TEM to take a side view of several graphene-boron nitride heterostructures. We find that the trapped hydrocarbons segregate into isolated pockets, leaving the interfaces atomically clean. Moreover, we observe a clear correlation between interface roughness and the electronic quality of encapsulated graphene. This work proves the concept of heterostructures assembled with atomic layer precision and provides their first TEM images.

Electronic properties of graphene encapsulated with different two-dimensional atomic crystals

Hexagonal boron nitride is the only substrate that has so far allowed graphene devices exhibiting micrometer-scale ballistic transport. Can other atomically flat crystals be used as substrates for making quality graphene heterostructures? Here we report on our search for alternative substrates. The devices fabricated by encapsulating graphene with molybdenum or tungsten disulfides and hBN are found to exhibit consistently high carrier mobilities of about 60 000 cm(2) V(-1) s(-1). In contrast, encapsulation with atomically flat layered oxides such as mica, bismuth strontium calcium copper oxide, and vanadium pentoxide results in exceptionally low quality of graphene devices with mobilities of ∼1000 cm(2) V(-1) s(-1). We attribute the difference mainly to self-cleansing that takes place at interfaces between graphene, hBN, and transition metal dichalcogenides. Surface contamination assembles into large pockets allowing the rest of the interface to become atomically clean. The cleansing process does not occur for graphene on atomically flat oxide substrates.

Tin(II) Sulfide (SnS) Nanosheets by Liquid-Phase Exfoliation of Herzenbergite: IV-VI Main Group Two-Dimensional Atomic Crystals

The liquid-phase exfoliation of tin(II) sulfide to produce SnS nanosheets in N-methyl-2-pyrrolidone is reported. The material is characterized by Raman spectroscopy, atomic force microscopy, lattice-resolution scanning transmission electron microscope imaging, and energy dispersive X-ray spectrum imaging. Quantum chemical calculations on the optoelectronic characteristics of bulk and 10-layer down to monolayer SnS have been performed using a quantum chemical density functional tight-binding approach. The optical properties of the SnS and centrifugally fractionated SnS nanosheet dispersions were compared to that predicted by theory. Through centrifugation, bilayer SnS nanosheets can be produced size-selectively. The scalable solution processing of semiconductor SnS nanosheets is the key to their commercial exploitation and is potentially an important step toward the realization of a future electronics industry based on two-dimensional materials.

Quality Heterostructures from Two-Dimensional Crystals Unstable in Air by Their Assembly in Inert Atmosphere

Many layered materials can be cleaved down to individual atomic planes, similar to graphene, but only a small minority of them are stable under ambient conditions. The rest react and decompose in air, which has severely hindered their investigation and potential applications. Here we introduce a remedial approach based on cleavage, transfer, alignment, and encapsulation of air-sensitive crystals, all inside a controlled inert atmosphere. To illustrate the technology, we choose two archetypal two-dimensional crystals that are of intense scientific interest but are unstable in air: black phosphorus and niobium diselenide. Our field-effect devices made from their monolayers are conductive and fully stable under ambient conditions, which is in contrast to the counterparts processed in air. NbSe2 remains superconducting down to the monolayer thickness. Starting with a trilayer, phosphorene devices reach sufficiently high mobilities to exhibit Landau quantization. The approach offers a venue to significantly expand the range of experimentally accessible two-dimensional crystals and their heterostructures.

Galvanic replacement reaction: recent developments for engineering metal nanostructures towards catalytic applications

Recent developments to achieve further physicochemical control in metallic nanomaterials by galvanic replacement are discussed towards applications in catalysis.

Desalination and Nanofiltration through Functionalized Laminar MoS2 Membranes

Laminar membranes of two-dimensional materials are excellent candidates for applications in water filtration due to the formation of nanocapillaries between individual crystals that can exhibit a molecular and ionic sieving effect, while allowing high water flux. This approach has been exemplified previously with graphene oxide, however these membranes suffer from swelling when exposed to liquid water, leading to low salt rejection and reducing their applicability for desalination applications. Here, we demonstrate that by producing thin (∼5 μm) laminar membranes of exfoliated molybdenum disulfide (MoS₂) in a straightforward and scalable process, followed by a simple chemical functionalization step, we can efficiently reject ∼99% of the ions commonly found in seawater, while maintaining water fluxes significantly higher (∼5 times) than those reported for graphene oxide membranes. These functionalized MoS₂ membranes exhibit excellent long-term stability with no swelling and consequent decrease in ion rejection, when immersed in water for periods exceeding 6 months. Similar stability is observed when exposed to organic solvents, indicating that they are ideal for a variety of technologically important filtration applications.

Atomic reconstruction in twisted bilayers of transition metal dichalcogenides

Van der Waals heterostructures form a unique class of layered artificial solids in which physical properties can be manipulated through controlled composition, order and relative rotation of adjacent atomic planes. Here we use atomic-resolution transmission electron microscopy to reveal the lattice reconstruction in twisted bilayers of the transition metal dichalcogenides, MoS₂ and WS₂. For twisted 3R bilayers, a tessellated pattern of mirror-reflected triangular 3R domains emerges, separated by a network of partial dislocations for twist angles θ < 2°. The electronic properties of these 3R domains, featuring layer-polarized conduction-band states caused by lack of both inversion and mirror symmetry, appear to be qualitatively different from those of 2H transition metal dichalcogenides. For twisted 2H bilayers, stable 2H domains dominate, with nuclei of a second metastable phase. This appears as a kagome-like pattern at θ ≈ 2°, transitioning at θ → 0 to a hexagonal array of screw dislocations separating large-area 2H domains. Tunnelling measurements show that such reconstruction creates strong piezoelectric textures, opening a new avenue for engineering of 2D material properties.

Nanostructured Aptamer-Functionalized Black Phosphorus Sensing Platform for Label-Free Detection of Myoglobin, a Cardiovascular Disease Biomarker

We report the electrochemical detection of the redox active cardiac biomarker myoglobin (Mb) using aptamer-functionalized black phosphorus nanostructured electrodes by measuring direct electron transfer. The as-synthesized few-layer black phosphorus nanosheets have been functionalized with poly-l-lysine (PLL) to facilitate binding with generated anti-Mb DNA aptamers on nanostructured electrodes. This aptasensor platform has a record-low detection limit (∼0.524 pg mL(-1)) and sensitivity (36 μA pg(-1) mL cm(-2)) toward Mb with a dynamic response range from 1 pg mL(-1) to 16 μg mL(-1) for Mb in serum samples. This strategy opens up avenues to bedside technologies for multiplexed diagnosis of cardiovascular diseases in complex human samples.

Interfacial ferroelectricity in marginally twisted 2D semiconductors

Twisted heterostructures of two-dimensional crystals offer almost unlimited scope for the design of new metamaterials. Here we demonstrate a room temperature ferroelectric semiconductor that is assembled using mono- or few-layer MoS₂. These van der Waals heterostructures feature broken inversion symmetry, which, together with the asymmetry of atomic arrangement at the interface of two 2D crystals, enables ferroelectric domains with alternating out-of-plane polarization arranged into a twist-controlled network. The last can be moved by applying out-of-plane electrical fields, as visualized in situ using channelling contrast electron microscopy. The observed interfacial charge transfer, movement of domain walls and their bending rigidity agree well with theoretical calculations. Furthermore, we demonstrate proof-of-principle field-effect transistors, where the channel resistance exhibits a pronounced hysteresis governed by pinning of ferroelectric domain walls. Our results show a potential avenue towards room temperature electronic and optoelectronic semiconductor devices with built-in ferroelectric memory functions.

3D Printing of Freestanding MXene Architectures for Current-Collector-Free Supercapacitors

Additive manufacturing (AM) technologies appear as a paradigm for scalable manufacture of electrochemical energy storage (EES) devices, where complex 3D architectures are typically required but are hard to achieve using conventional techniques. The combination of these technologies and innovative material formulations that maximize surface area accessibility and ion transport within electrodes while minimizing space are of growing interest. Herein, aqueous inks composed of atomically thin (1-3 nm) 2D Ti₃ C₂ T_x with large lateral size of about 8 µm possessing ideal viscoelastic properties are formulated for extrusion-based 3D printing of freestanding, high specific surface area architectures to determine the viability of manufacturing energy storage devices. The 3D-printed device achieves a high areal capacitance of 2.1 F cm^-2 at 1.7 mA cm^-2 and a gravimetric capacitance of 242.5 F g^-1 at 0.2 A g^-1 with a retention of above 90% capacitance for 10 000 cycles. It also exhibits a high energy density of 0.0244 mWh cm^-2 and a power density of 0.64 mW cm^-2 at 4.3 mA cm^-2 . It is anticipated that the sustainable printing and design approach developed in this work can be applied to fabricate high-performance bespoke multiscale and multidimensional architectures of functional and structural materials for integrated devices in various applications.

WSe₂ Light-Emitting Tunneling Transistors with Enhanced Brightness at Room Temperature

Monolayers of molybdenum and tungsten dichalcogenides are direct bandgap semiconductors, which makes them promising for optoelectronic applications. In particular, van der Waals heterostructures consisting of monolayers of MoS2 sandwiched between atomically thin hexagonal boron nitride (hBN) and graphene electrodes allows one to obtain light emitting quantum wells (LEQWs) with low-temperature external quantum efficiency (EQE) of 1%. However, the EQE of MoS2- and MoSe2-based LEQWs shows behavior common for many other materials: it decreases fast from cryogenic conditions to room temperature, undermining their practical applications. Here we compare MoSe2 and WSe2 LEQWs. We show that the EQE of WSe2 devices grows with temperature, with room temperature EQE reaching 5%, which is 250× more than the previous best performance of MoS2 and MoSe2 quantum wells in ambient conditions. We attribute such different temperature dependences to the inverted sign of spin-orbit splitting of conduction band states in tungsten and molybdenum dichalcogenides, which makes the lowest-energy exciton in WSe2 dark.

A comparison of topical ketorolac, systemic flurbiprofen, and placebo for the inhibition of bone loss in adult periodontitis

Systemic non-steroidal anti-inflammatory drugs (NSAIDs) have been shown to reduce alveolar bone loss in periodontitis. This study assesses the efficacy of a topical NSAID rinse, containing ketorolac tromethamine as the active agent. Adult periodontitis patients (n = 55) were studied in this 6-month randomized, double blind, parallel, placebo and positive-controlled study. Each patient had a least 3 sites at high risk for bone loss as assessed by low dose bone scan. Groups, balanced for gender, were assigned to one of three regimens: bid ketorolac rinse (0.1%) with placebo capsule; 50 mg bid flurbiprofen capsule (positive control) with placebo rinse; or bid placebo rinse and capsule. Prophylaxes were provided every 3 months. Monthly examinations assessed safety, gingival condition, and gingival crevicular fluid PGE2. Standardized radiographs were taken at baseline and at 3 and 6 months for digital subtraction radiography. A significant loss in bone height was observed during the study period in the placebo group (-0.63 +/- 0.11; P < 0.001), but not in the flurbiprofen (-0.10 +/- 0.12; P = 0.40) or ketorolac rinse (+0.20 +/- 0.11 mm; P = 0.07) groups. Nested ANOVA revealed that ketorolac and flurbiprofen groups had less bone loss (P < 0.01) and reduced gingival crevicular fluid PGE2 levels (P < 0.03) compared to placebo. ANOVA suggests (P = 0.06) that ketorolac rinse preserved more alveolar bone than systemic flurbiprofen at the dose regimens utilized. These data indicate that ketorolac rinse may be beneficial in the treatment of adult periodontitis.

Electrochemical properties of CVD grown pristine graphene: monolayer- vs. quasi-graphene

We report the electrochemical properties of pristine monolayer, double layer and few-layer (termed quasi-) graphene grown via CVD and transferred using PMMA onto an insulating substrate (silicon dioxide wafers). Characterisation has been performed by Raman spectroscopy, optical spectroscopy, Atomic Force Microscopy and X-ray Photoelectron Spectroscopy, revealing 'true' pristine single-layer graphene (O/C of 0.05) at the former and pristine quasi-graphene at the latter (O/C of 0.07); the term "quasi-graphene" is coined due to the surface comprising on average 4-graphene-layers. The graphene electrodes are electrochemically characterised using both inner-sphere and outer-sphere redox probes with electrochemical performances of the graphene electrodes compared to other available graphitic electrodes, namely that of basal- and edge- plane pyrolytic graphite electrodes constructed from Highly Ordered Pyrolytic Graphite (HOPG), with information on heterogeneous rate constants (k(o)) obtained. The electrochemical rate constants are predominantly influenced by the electronic properties of the graphene surfaces. Monolayer graphene is found to exhibit slow heterogeneous electron transfer (HET) kinetics towards the redox probes studied, with HET rates ca. 2 and 8 times faster at quasi-graphene and HOPG respectively, relative to that of the monolayer graphene electrode. Critically contrasting the performance of monolayer graphene to quasi-graphene and HOPG electrodes reveals that increasing the number of graphene layers results in improved electrochemical properties, where in terms of the electrochemical reversibility of the probes studied: monolayer-graphene < quasi-graphene < HOPG, as governed by the respective HET electrochemical rate constants. Given that edge plane sites are the predominant origin of fast electron transfer kinetics at graphitic materials, the slow HET rates at pristine single-layer graphene electrodes are likely due to graphene's fundamental geometry, which comprises a small edge plane and large basal plane contribution. In the case of quasi-graphene and HOPG, they possess increasing global coverage of electrochemically reactive edge plane sites (respectively) and thus exhibit superior electrochemical performances over that of monolayer graphene. Last, the case of a double-layer graphene electrode is considered, which as a result of its fabrication possesses a large global coverage of edge plane like- sites/defects. In agreement with the former conclusions, the double-layered defect-graphene electrode is found to exhibit fast/favourable electrochemical properties, which is attributed to its large edge plane content (i.e. defect abundant graphene) and thus is further evidence that the electrochemical response is dependent on the density of edge plane sites at graphene based electrodes (influenced by the coverage of graphene-defects and the number of graphene layers).

Heterostructures produced from nanosheet-based inks

The new paradigm of heterostructures based on two-dimensional (2D) atomic crystals has already led to the observation of exciting physical phenomena and creation of novel devices. The possibility of combining layers of different 2D materials in one stack allows unprecedented control over the electronic and optical properties of the resulting material. Still, the current method of mechanical transfer of individual 2D crystals, though allowing exceptional control over the quality of such structures and interfaces, is not scalable. Here we show that such heterostructures can be assembled from chemically exfoliated 2D crystals, allowing for low-cost and scalable methods to be used in device fabrication.

Personalised risk communication for informed decision making about taking screening tests

BACKGROUND

There is a trend towards greater patient involvement in healthcare decisions. Adequate discussion of the risks and benefits associated with different choices is often required if involvement is to be genuine and effective. Achieving both the adequate involvement of consumers and informed decision making are now seen as important goals for any screening programme. Personalised risk estimates have been shown to be effective methods of risk communication in general, but the effectiveness of different strategies has not previously been examined.

OBJECTIVES

To assess the effects of different types of personalised risk communication for consumers making decisions about taking screening tests.

SEARCH STRATEGY

We searched the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library Issue 4, 2004), MEDLINE (1985 to December 2005), EMBASE (1985 to December 2005), CINAHL (1985 to December 2005), and PsycINFO (1989 to December 2005). Follow-up searches involved hand searching Preventive Medicine, citation searches on seven authors, and searching reference lists of articles. For the original version of this review (Edwards 2003c) we also searched CancerLit (1985 to 2001) and Science Citation Index Expanded (searched March 2002).

SELECTION CRITERIA

Randomised controlled trials addressing the decision by consumers of whether or not to undergo screening, incorporating an intervention with a 'personalised risk communication element' and reporting cognitive, affective, or behavioural outcomes. A 'personalised risk communication element' is based on the individual's own risk factors for a condition (such as age or family history). It may be calculated from an individual's risk factors using formulae derived from epidemiological data, and presented as an absolute or relative risk or as a risk score, or it may be categorised into, for example, high, medium or low risk groups. It may be less detailed still, involving a listing, for example, of a consumer's risk factors as a focus for discussion and intervention.

DATA COLLECTION AND ANALYSIS

Two authors independently assessed each trial for quality and extracted data. We extracted data about the nature and setting of the intervention, and relevant outcome data, along with items relating to methodological quality. We then used standard statistical methods of the Consumers and Communication Review Group to combine data using MetaView, including analysis according to different levels of detail of personalised risk communication, different condition for screening, and studies based only on high risk participants rather than people at 'average' risk.

MAIN RESULTS

Twenty-two studies were included, nine of which were added in the 2006 update of this review. There was weak evidence, consistent with a small effect, that personalised risk communication (whether written, spoken or visually presented) increases uptake of screening tests (odds ratio (OR) 1.31 (random effects, 95% confidence interval (CI) 0.98 to 1.77). In three studies the interventions showed a trend towards more accurate risk perception (OR 1.65 (95% CI 0.96 to 2.81), and three other trials with heterogenous outcome measures showed improvements in knowledge with personalised risk interventions. There was little other evidence from these studies that the interventions promoted or achieved informed decision making by consumers about participation in screening. More detailed personalised risk communication may be associated with a smaller increase in uptake of tests. That is, for personalised risk communication which used and presented numerical calculations of risk, the OR for test uptake was 0.82 (95% CI 0.65 to 1.03). For risk estimates or calculations which were categorised into high, medium or low strata of risk, the OR was 1.42 (95% CI 1.07 to 1.89). For risk communication that simply listed personal risk factors the OR was 1.42 (95% CI 0.95 to 2.12). Over half of the included studies assessed interventions in the context of mammography. These studies showed similar effects to the overall dataset. The five studies examining risk communication in high risk individuals (individuals at higher risk due to, for example, a family history of breast cancer or other conditions) showed larger odds ratios for uptake of tests than the other studies (random effects OR 1.74; 95% CI 1.05 to 2.88). There were insufficient data from the included studies to report odds ratios on other key outcomes such as: intention to take tests, anxiety, satisfaction with decisions, decisional conflict, knowledge and resource use.

AUTHORS' CONCLUSIONS

Personalised risk communication (as currently implemented in the included studies) may have a small effect on increasing uptake of screening tests, and there is only limited evidence that the interventions have promoted or achieved informed decision making by consumers.

Self-assembly of a layered two-dimensional molecularly woven fabric

Fabrics-materials consisting of layers of woven fibres-are some of the most important materials in everyday life¹. Previous nanoscale weaves^2-16 include isotropic crystalline covalent organic frameworks^12-14 that feature rigid helical strands interlaced in all three dimensions, rather than the two-dimensional^17,18 layers of flexible woven strands that give conventional textiles their characteristic flexibility, thinness, anisotropic strength and porosity. A supramolecular two-dimensional kagome weave¹⁵ and a single-layer, surface-supported, interwoven two-dimensional polymer¹⁶ have also been reported. The direct, bottom-up assembly of molecular building blocks into linear organic polymer chains woven in two dimensions has been proposed on a number of occasions^19-23, but has not previously been achieved. Here we demonstrate that by using an anion and metal ion template, woven molecular 'tiles' can be tessellated into a material consisting of alternating aliphatic and aromatic segmented polymer strands, interwoven within discrete layers. Connections between slowly precipitating pre-woven grids, followed by the removal of the ion template, result in a wholly organic molecular material that forms as stacks and clusters of thin sheets-each sheet up to hundreds of micrometres long and wide but only about four nanometres thick-in which warp and weft single-chain polymer strands remain associated through periodic mechanical entanglements within each sheet. Atomic force microscopy and scanning electron microscopy show clusters and, occasionally, isolated individual sheets that, following demetallation, have slid apart from others with which they were stacked during the tessellation and polymerization process. The layered two-dimensional molecularly woven material has long-range order, is birefringent, is twice as stiff as the constituent linear polymer, and delaminates and tears along well-defined lines in the manner of a macroscopic textile. When incorporated into a polymer-supported membrane, it acts as a net, slowing the passage of large ions while letting smaller ions through.

Biosynthesis and Characterization of Copper Nanoparticles Using Shewanella oneidensis: Application for Click Chemistry

Copper nanoparticles (Cu-NPs) have a wide range of applications as heterogeneous catalysts. In this study, a novel green biosynthesis route for producing Cu-NPs using the metal-reducing bacterium, Shewanella oneidensis is demonstrated. Thin section transmission electron microscopy shows that the Cu-NPs are predominantly intracellular and present in a typical size range of 20-40 nm. Serial block-face scanning electron microscopy demonstrates the Cu-NPs are well-dispersed across the 3D structure of the cells. X-ray absorption near-edge spectroscopy and extended X-ray absorption fine-structure spectroscopy analysis show the nanoparticles are Cu(0), however, atomic resolution images and electron energy loss spectroscopy suggest partial oxidation of the surface layer to Cu2 O upon exposure to air. The catalytic activity of the Cu-NPs is demonstrated in an archetypal "click chemistry" reaction, generating good yields during azide-alkyne cycloadditions, most likely catalyzed by the Cu(I) surface layer of the nanoparticles. Furthermore, cytochrome deletion mutants suggest a novel metal reduction system is involved in enzymatic Cu(II) reduction and Cu-NP synthesis, which is not dependent on the Mtr pathway commonly used to reduce other high oxidation state metals in this bacterium. This work demonstrates a novel, simple, green biosynthesis method for producing efficient copper nanoparticle catalysts.

Mechanisms of Liquid-Phase Exfoliation for the Production of Graphene

Liquid- phase exfoliation (LPE) is the principal method of producing two-dimensional (2D) materials such as graphene in large quantities with a good balance between quality and cost and is now widely adopted by both the academic and industrial sectors. The fragmentation and exfoliation mechanisms involved have usually been simply attributed to the force induced by ultrasound and the interaction with the solvent molecules. Nonetheless, little is known about how they actually occur, i.e., how thick and large graphite crystals can be exfoliated into thin and small graphene flakes. Here, we demonstrate that during ultrasonic LPE the transition from graphite flakes to graphene takes place in three distinct stages. First, sonication leads to the rupture of large flakes and the formation of kink band striations on the flake surfaces, primarily along zigzag directions. Second, cracks form along these striations, and together with intercalation of solvent, lead to the unzipping and peeling off of thin graphite strips that in the final stage are exfoliated into graphene. The findings will be of great value in the quest to optimize the lateral dimensions, thickness, and yield of graphene and other 2D materials in large-scale LPE for various applications.

Grain-boundary-enhanced carrier collection in CdTe solar cells

When CdTe solar cells are doped with Cl, the grain boundaries no longer act as recombination centers but actively contribute to carrier collection efficiency. The physical origin of this remarkable effect has been determined through a combination of aberration-corrected scanning transmission electron microscopy, electron energy loss spectroscopy, and first-principles theory. Cl substitutes for a large proportion of the Te atoms within a few unit cells of the grain boundaries. Density functional calculations reveal the mechanism, and further indicate the grain boundaries are inverted to n type, establishing local p-n junctions which assist electron-hole pair separation. The mechanism is electrostatic, and hence independent of the geometry of the boundary, thereby explaining the universally high collection efficiency of Cl-doped CdTe solar cells.