Dioxygen Activation at a Single Copper Site: Structure, Bonding, and Mechanism of Formation of 1:1 Cu−O2 Adducts

To evaluate the fundamental process of O(2) activation at a single copper site that occurs in biological and catalytic systems, a detailed study of O(2) binding to Cu(I) complexes of beta-diketiminate ligands L (L(1) = backbone Me; L(2) = backbone tBu) by X-ray crystallography, X-ray absorption spectroscopy (XAS), cryogenic stopped-flow kinetics, and theoretical calculations was performed. Using synchrotron radiation, an X-ray diffraction data set for L(2)CuO(2) was acquired, which led to structural parameters in close agreement to theoretical predictions. Significant Cu(III)-peroxo character for the complex was corroborated by XAS. On the basis of stopped-flow kinetics data and theoretical calculations for the oxygenation of L(1)Cu(RCN) (R = alkyl, aryl) in THF and THF/RCN mixtures between 193 and 233 K, a dual pathway mechanism is proposed involving (a) rate-determining solvolysis of RCN by THF followed by rapid oxygenation of L(1)Cu(THF) and (b) direct, bimolecular oxygenation of L(1)Cu(RCN) via an associative process.

On the origin of selective nitrous oxide N-N bond cleavage by three-coordinate molybdenum(III) complexes

Reaction of Mo(N[R]Ar)(3) (R = (t)Bu or C(CD(3))(2)CH(3)) with N(2)O gives rise exclusively to a 1:1 mixture of nitride NMo(N[R]Ar)(3) and nitrosyl ONMo(N[R]Ar)(3), rather than the known oxo complex OMo(N[R]Ar)(3) and dinitrogen. Solution calorimetry measurements were used to determine the heat of reaction of Mo(N[R]Ar)(3) with N(2)O and, independently, the heat of reaction of Mo(N[R]Ar)(3) with NO. Derived from the latter measurements is an estimate (155.3 +/- 3.3 kcal.mol(-1)) of the molybdenum-nitrogen bond dissociation enthalpy for the terminal nitrido complex, NMo(N[R]Ar)(3). Comparison of the new calorimetry data with those obtained previously for oxo transfer to Mo(N[R]Ar)(3) shows that the nitrous oxide N-N bond cleavage reaction is under kinetic control. Stopped-flow kinetic measurements revealed the reaction to be first order in both Mo(N[R]Ar)(3) and N(2)O, consistent with a mechanism featuring post-rate-determining dinuclear N-N bond scission, but also consistent with cleavage of the N-N bond at a single metal center in a mechanism requiring the intermediacy of nitric oxide. The new 2-adamantyl-substituted molybdenum complex Mo(N[2-Ad]Ar)(3) was synthesized and found also to split N(2)O, resulting in a 1:1 mixture of nitrosyl and nitride products; the reaction exhibited first-order kinetics and was found to be ca. 6 times slower than that for the tert-butyl-substituted derivative. Discussed in conjunction with studies of the 2-adamantyl derivative Mo(N[2-Ad]Ar)(3) is the role of ligand-imposed steric constraints on small-molecule, e.g. N(2) and N(2)O, activation reactivity. Bradley's chromium complex Cr(N(i)Pr(2))(3) was found to be competitive with Mo(N[R]Ar)(3) for NO binding, while on its own exhibiting no reaction with N(2)O. Competition experiments permitted determination of ratios of second-order rate constants for NO binding by the two molybdenum complexes and the chromium complex. Analysis of the product mixtures resulting from carrying out the N(2)O cleavage reactions with Cr(N(i)Pr(2))(3) present as an in situ NO scavenger rules out as dominant any mechanism involving the intermediacy of NO. Simplest and consistent with all the available data is a post-rate-determining bimetallic N-N scission process. Kinetic funneling of the reaction as indicated is taken to be governed by the properties of nitrous oxide as a ligand, coupled with the azophilic nature of three-coordinate molybdenum(III) complexes.

Proton-Directed Redox Control of O−O Bond Activation by Heme Hydroperoxidase Models

Hangman metalloporphyrin complexes poise an acid-base group over a redox-active metal center and in doing so allow the "pull" effect of the secondary coordination environment of the heme cofactor of hydroperoxidase enzymes to be modeled. Stopped-flow investigations have been performed to decipher the influence of a proton-donor group on O-O bond activation. Low-temperature reactions of tetramesitylporphyrin (TMP) and Hangman iron complexes containing acid (HPX-CO2H) and methyl ester (HPX-CO2Me) functional groups with peroxyacids generate high-valent Fe=O active sites. Reactions of peroxyacids with (TMP)FeIII(OH) and methyl ester Hangman (HPX-CO2Me)FeIII(OH) give both O-O heterolysis and homolysis products, Compound I (Cpd I) and Compound II (Cpd II), respectively. However, only the former is observed when the hanging group is the acid, (HPX-CO2H)FeIII(OH), because odd-electron homolytic O-O bond cleavage is inhibited. This proton-controlled, 2e- (heterolysis) vs 1e- (homolysis) redox specificity sheds light on the exceptional catalytic performance of the Hangman metalloporphyrin complexes and provides tangible benchmarks for using proton-coupled multielectron reactions to catalyze O-O bond-breaking and bond-making reactions.

Dioxygen Binding to Complexes with FeII2(μ-OH)2 Cores: Steric Control of Activation Barriers and O2-Adduct Formation

A series of complexes with [Fe(II)(2)(mu-OH)(2)] cores has been synthesized with N3 and N4 ligands and structurally characterized to serve as models for nonheme diiron(II) sites in enzymes that bind and activate O(2). These complexes react with O(2) in solution via bimolecular rate-limiting steps that differ in rate by 10(3)-fold, depending on ligand denticity and steric hindrance near the diiron center. Low-temperature trapping of a (mu-oxo)(mu-1,2-peroxo)diiron(III) intermediate after O(2) binding requires sufficient steric hindrance around the diiron center and the loss of a proton (presumably that of a hydroxo bridge or a yet unobserved hydroperoxo intermediate). The relative stability of these and other (mu-1,2-peroxo)diiron(III) intermediates suggests that these species may not be on the direct pathway for dioxygen activation.

Dioxygen activation at non-heme iron: insights from rapid kinetic studies

One of the common biochemical pathways of binding and activation of dioxygen involves non-heme iron centers. The enzyme cycles usually start with an iron(II) or diiron(II) state and traverse via several intermediates (detected or postulated) such as (di)iron(III)-superoxo, (di)iron(III)-(hydro)peroxo, iron(III)iron(IV)-oxo, and (di)iron(IV)-oxo species, some of which are responsible for substrate oxidation. In this Account, we present results of kinetic and mechanistic studies of dioxygen binding and activation reactions of model inorganic iron compounds. The number of iron centers, their coordination number, and the steric and electronic properties of the ligands were varied in several series of well-characterized complexes that provided reactive manifolds modeling the function of native non-heme iron enzymes. Time-resolved cryogenic stopped-flow spectrophotometry permitted the identification of kinetically competent intermediates in these systems. Inner-sphere mechanisms dominated the chemistry of dioxygen binding, intermediate transformations, and substrate oxidation as most of these processes were controlled by the rates of ligand substitution at the iron centers.

Nickel(II) complexes with tetra- and pentadentate aminopyridine ligands: synthesis, structure, electrochemistry, and reduction to nickel(I) species

A series of nickel(II) complexes with polydentate aminopyridine ligands N,N,N'-tris-[2-(2'-pyridyl)ethyl]ethane-1,2-diamine (L1), N,N,N'-tris-[2-(2'-pyridyl)ethyl]-N'-methylethane-1,2-diamine (L2), and N,N'-bis-[2-(2'-pyridyl)ethyl]-N,N'-dimethylethane-1,2-diamine (L3) were synthesized and characterized by elemental analysis and spectroscopic methods. Single-crystal X-ray diffraction studies showed that the Ni(II) ions have five-coordinate square-pyramidal geometry in [NiL2](ClO(4))(2), similar to that previously found in [NiL1](ClO(4))(2) x CH(3)NO(2) (Hoskins, B. F.; Whillans, F. D.J. Chem. Soc., Dalton Trans. 1975, 657), and square-planar geometry in [NiL3](ClO(4))(2). All three nickel(II) complexes are reduced by sodium borohydride or sodium amalgam in organic solvents to nickel(I) species, which were identified by highly anisotropic EPR spectra at 100 K: g(1) = 2.239, g(2) = 2.199, and g(3) = 2.025 for [NiL1](+); g(axially) = 2.324 and g(radially) = 2.079 for [NiL2](+) and [NiL3](+). Cyclic voltammetry of the nickel(II) complexes in acetonitrile exhibited reversible reduction waves at -1.01 V for [NiL1](2+), -0.91 V for [NiL2](2+), and -0.83 V for [NiL3](2+) versus SCE, potentials which are significantly less negative than those of most previously characterized Ni(II) complexes with nitrogen-only donor atoms. Complexes [NiL1](2+) and [NiL2](2+) showed high catalytic activity in the electroreduction of 1,2-trans-dibromocyclohexane to cyclohexene.

A mechanistic study of the reaction between a diiron(II) complex [FeII(2)(mu-OH)2(6-Me3-TPA)2](2+) and O2 to form a diiron(III) peroxo complex

A kinetic study of the reaction between a diiron(II) complex [Fe(II)(2)(mu-OH)(2)(6-Me(3)-TPA)(2)](2+) 1, where 6-Me(3)-TPA = tris(6-methyl-2-pyridylmethyl)amine, and dioxygen is presented. A diiron(III) peroxo complex [Fe(III)(2)(mu-O)(mu-O(2))(6-Me(3)-TPA)(2)](2+) 2 forms quantitatively in dichloromethane at temperatures from -80 to -40 degrees C. The reaction is first order in [Fe(II)(2)] and [O(2)], with the activation parameters DeltaH(double dagger) = 17 +/- 2 kJ mol(-1) and DeltaS(double dagger) = -175 +/- 20 J mol(-1) K(-1). The reaction rate is not significantly influenced by the addition of H(2)O or D(2)O. The reaction proceeds faster in more polar solvents (acetone and acetonitrile), but the yield of 2 is not quantitative in these solvents. Complex 1 reacts with NO at a rate about 10(3) faster than with O(2). The mechanistic analysis suggests an associative rate-limiting step for the oxygenation of 1, similar to that for stearoyl-ACP Delta(9)-desaturase, but distinct from the probable dissociative pathway of methane monoxygenase. An eta(1)-superoxo Fe(II)Fe(III) species is a likely steady-state intermediate during the oxygenation of complex 1.

Mechanism of White Phosphorus Activation by Three-Coordinate Molybdenum(III) Complexes: A Thermochemical, Kinetic, and Quantum Chemical Investigation

White phosphorus (P(4)) reacts with three-coordinate molybdenum(III) trisamides or molybdaziridine hydride complexes to produce either bridging or terminal phosphide (P(3)(-)) species, depending upon the ancillary ligand steric demands. Thermochemical measurements have been made that place the MoP triple bond dissociation enthalpy at 92.2 kcal.mol(-)(1). Thermochemical measurements together with computational analysis rule out simple P-atom abstraction from P(4) as a step in the phosphorus activation mechanism. Kinetic measurements made by the stopped-flow method show that the reaction between the monomeric molybdenum complexes and P(4) is first-order both in metal complex and in P(4). Cyclo-P(3) complexes can be obtained when ancillary ligand steric demands are small, but kinetic measurements rule them out as monometallic intermediates in the P(4) activation mechanism. Also studied by calorimetric, kinetic, and in one case variable-temperature NMR methods is the process of mu-phosphide bridge formation. Post-rate-determining steps of the P(4) activation process were examined in a search for minima on the reaction's potential energy surface, leading to the proposal of two plausible, parallel, bimetallic reaction channels.

Reactivity of a (μ-Oxo)(μ-hydroxo)diiron(III) Diamond Core with Water, Urea, Substituted Ureas, and Acetamide

A series of iron(III) complexes of the tetradentate ligand BPMEN (N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)ethane-1,2-diamine) were prepared and structurally characterized. Complex [Fe(2)(mu-O)(mu-OH)(BPMEN)(2)](ClO(4))(3) (1) contains a (mu-oxo)(mu-hydroxo)diiron(III) diamond core. Complex [Fe(BPMEN)(urea)(OEt)](ClO(4))(2) (2) is a rare example of a mononuclear non-heme iron(III) alkoxide complex. Complexes [Fe(2)(mu-O)(mu-OC(NH(2))NH)(BPMEN)(2)](ClO(4))(3) (3) and [Fe(2)(mu-O)(mu-OC(NHMe)NH)(BPMEN)(2)](ClO(4))(3) (4) feature N,O-bridging deprotonated urea ligands. The kinetics and equilibrium of the reactions of 1 with ligands L (L = water, urea, 1-methylurea, 1,1-dimethylurea, 1,3-dimethylurea, 1,1,3,3-tetramethylurea, and acetamide) in acetonitrile solutions were studied by stopped-flow UV-vis spectrophotometry, NMR, and mass spectrometry. All these ligands react with 1 in a rapid equilibrium, opening the four-membered Fe(III)(mu-O)(mu-OH)Fe(III) core and forming intermediates with a (HO)Fe(III)(mu-O)Fe(III)(L) core. The entropy and enthalpy for urea binding through oxygen are DeltaH degrees = -25 kJ mol(-1) and DeltaS degrees = -53.4 J mol(-1) K(-1) with an equilibrium constant of K(1) = 37 L mol(-1) at 25 degrees C. Addition of methyl groups on one of the urea nitrogen did not affect this reaction, but the addition of methyl groups on both nitrogens considerably decreased the value of K(1). An opening of the hydroxo bridge in the diamond core complex [Fe(2)(mu-O)(mu-OH)(BPMEN)(2)] is a rapid associative process, with activation enthalpy of about 60 kJ mol(-1) and activation entropies ranging from -25 to -43 J mol(-1) K(-1). For the incoming ligands with the -CONH(2) functionality (urea, 1-methylurea, 1,1-dimethylurea, and acetamide), a second, slow step occurs, leading to the formation of stable N,O-coordinated amidate diiron(III) species such as 3 and 4. The rate of this ring-closure reaction is controlled by the steric bulk of the incoming ligand and by the acidity of the amide group.

Role of Carboxylate Bridges in Modulating Nonheme Diiron(II)/O2 Reactivity

A series of diiron(II) complexes of the dinucleating ligand HPTP (N,N,N',N'-tetrakis(2-pyridylmethyl)-2-hydroxy-1,3-diaminopropane) with one or two supporting carboxylate bridges has been synthesized and characterized. The crystal structure of one member of each subset has been obtained to reveal for subset A a (micro-alkoxo)(micro-carboxylato)diiron(II) center with one five- and one six-coordinate metal ion and for subset B a coordinatively saturated (micro-alkoxo)bis(micro-carboxylato)diiron(II) center. These complexes react with O(2) in second-order processes to form adducts characterized as (micro-1,2-peroxo)diiron(III) complexes. Stopped-flow kinetic studies show that the oxygenation step is sensitive to the availability of an O(2) binding site on the diiron(II) center, as subset B reacts more slowly by an order of magnitude. The lifetimes of the O(2) adducts are also distinct and can be modulated by the addition of oxygen donor ligands. The O(2) adduct of a monocarboxylate complex decays by a fast second-order process that must be monitored by stopped-flow methods, but becomes stabilized in CH(2)Cl(2)/DMSO (9:1 v/v) and decomposes by a much slower first-order process. The O(2) adduct of a dicarboxylate complex is even more stable in pure CH(2)Cl(2) and decays by a first-order process. These differences in adduct stability are reflected in the observation that only the O(2) adducts of monocarboxylate complexes can oxidize substrates, and only those substrates that can bind to the diiron center. Thus, the much greater stability of the O(2) adducts of dicarboxylate complexes can be rationalized by the formation of a (micro-alkoxo)(micro-1,2-peroxo)diiron(III) complex wherein the carboxylate bridges in the diiron(II) complex become terminal ligands in the O(2) adduct, occupy the remaining coordination sites on the diiron center, and prevent binding of potential substrates. Implications for the oxidation mechanisms of nonheme diiron enzymes are discussed.

Mechanistic Studies on the Formation and Reactivity of Dioxygen Adducts of Diiron Complexes Supported by Sterically Hindered Carboxylates

Dioxygen activation by enzymes such as methane monooxygenase, ribonucleotide reductase, and fatty acid desaturases occurs at a nonheme diiron active site supported by two histidines and four carboxylates, typically involving a (peroxo)diiron(III,III) intermediate in an early step of the catalytic cycle. Biomimetic tetracarboxylatodiiron(II,II) complexes with the familiar "paddlewheel" topology comprising sterically bulky o-dixylylbenzoate ligands with pyridine, 1-methylimidazole, or THF at apical sites readily react with O(2) to afford thermally labile peroxo intermediates that can be trapped and characterized spectroscopically at low temperatures (193 K). Cryogenic stopped-flow kinetic analysis of O(2) adduct formation carried out for the three complexes reveals that dioxygen binds to the diiron(II,II) center with concentration dependences and activation parameters indicative of a direct associative pathway. The pyridine and 1-methylimidazole intermediates decay by self-decomposition. However, the THF intermediate decays much faster by oxygen transfer to added PPh(3), the kinetics of which has been studied with double mixing experiments in a cryogenic stopped-flow apparatus. The results show that the decay of the THF intermediate is kinetically controlled by the dissociation of a THF ligand, a conclusion supported by the observation of saturation kinetic behavior with respect to PPh(3), inhibition by added THF, and invariant saturation rate constants for the oxidation of various phosphines. It is proposed that the proximity of the reducing substrate to the peroxide ligand on the diiron coordination sphere facilitates the oxygen-atom transfer. This unique investigation of the reaction of an O(2) adduct of a biomimetic tetracarboxylatodiiron(II,II) complex provides a synthetic precedent for understanding the electrophilic reactivity of like adducts in the active sties of nonheme diiron enzymes.

Diiron(II) μ-Aqua-μ-hydroxo Model for Non-Heme Iron Sites in Proteins

We have synthesized a diiron(II) complex with a novel aqua-hydroxo bridging motif, [Fe2(mu-H2O)(mu-OH)(TPA)2](OTf)3 (1). This is a new member of the diiron diamond core family. The complex is stable in solution in nonpolar solvents as well as in the solid state. Two high-spin iron(II) sites are antiferromagnetically coupled (J = -9.6 cm(-1)). The drastic difference of ca. 1 V in the redox potential between complex 1 and its bis(hydroxo)-bridged analogue Fe2(OH)2(TPA)3+ is accompanied by only a moderate difference in the dioxygen reactivity. This observation is consistent with the inner-sphere mechanism of iron(II)-dioxygen association rather than the outer-sphere electron transfer.

Stable supramolecular dimer of self-complementary benzo-18-crown-6 with a pendant protonated amino arm

The novel 4'-(ammoniummethylene)benzo-18-crown-6 cation was synthesized as a hexafluorophosphate salt and found to exist as a cyclophane-like dimer in the solid state, gas phase and in acetonitrile solution.

Mechanism of white phosphorus activation by three-coordinate molybdenum(III) complexes: a thermochemical, kinetic, and quantum chemical investigation

White phosphorus (P(4)) reacts with three-coordinate molybdenum(III) trisamides or molybdaziridine hydride complexes to produce either bridging or terminal phosphide (P(3)(-)) species, depending upon the ancillary ligand steric demands. Thermochemical measurements have been made that place the MoP triple bond dissociation enthalpy at 92.2 kcal.mol(-)(1). Thermochemical measurements together with computational analysis rule out simple P-atom abstraction from P(4) as a step in the phosphorus activation mechanism. Kinetic measurements made by the stopped-flow method show that the reaction between the monomeric molybdenum complexes and P(4) is first-order both in metal complex and in P(4). Cyclo-P(3) complexes can be obtained when ancillary ligand steric demands are small, but kinetic measurements rule them out as monometallic intermediates in the P(4) activation mechanism. Also studied by calorimetric, kinetic, and in one case variable-temperature NMR methods is the process of mu-phosphide bridge formation. Post-rate-determining steps of the P(4) activation process were examined in a search for minima on the reaction's potential energy surface, leading to the proposal of two plausible, parallel, bimetallic reaction channels.