Surface modification of halide perovskite using EDTA-complexed SnO2 as electron transport layer in high performance solar cells

The long-term performance of metal halide perovskite solar cells (PSCs) can be significantly improved by tuning the surface characteristics of the perovskite layers. Herein, low-temperature-processed ethylenediaminetetraacetic acid (EDTA)-complexed SnO2 (E-SnO2) is successfully employed as an electron transport layer (ETL) in PSCs, enhancing the efficiency and stability of the devices. The effects of EDTA treatment on SnO2 are investigated for different concentrations: comparing the solar cells' response with 15%-2.5% SnO2 and E-SnO2 based ETLs, and it was found that 7.5% E-SnO2 provided the best results. The improved surface properties of the perovskite layer on E-SnO2 are attributed to the presence of small amount of PbI2 which contributes to passivate the defects at the grain boundaries and films' surface. However, for the excess PbI2 based devices, photocurrent dropped, which could be attributed to the generation of shallow traps due to excess PbI2. The better alignment between the Fermi level of E-SnO2 and the conduction band of perovskite is another favorable aspect that enables increased open-circuit potential (VOC), from 0.82 V to 1.015 V, yielding a stabilized power conversion efficiency of 15.51%. This complex ETL strategy presented here demonstrates the enormous potential of E-SnO2 as selective contact to enhance the perovskite layer properties and thereby allow stable and high-efficiency PSCs.

MXene-Enhanced Nanoscale Photoconduction in Perovskite Solar Cells Revealed by Conductive Atomic Force Microscopy

The use of MXene materials in perovskite solar cells (PSCs) has received significant interest due to their distinct features that result from the termination of functional groups and the oxidation of MXene. Herein, we have used photoconductive atomic force microscopy (pcAFM) to map the local (nanoscale) photovoltaic performances of the Ti3C2Tx MXene nanosheet-integrated TiO2 (MXene@TiO2) electron transport layer-based PSCs to determine the influence of the treatment on the microscopic charge flow inside the devices. At different applied voltages, the morphology and current have been simultaneously measured with nanoscale resolution from the top surfaces of the solar cells without back contacts. The PSCs based on MXene@TiO2 exhibit more enhanced current flow across the grains than the only TiO2-based PSCs. At zero applied bias, the average local photocurrent for MXene-integrated PSCs is several times higher than the reference PSCs and decreases gradually when the positive bias is increased until the open circuit voltage. Considerable differences were also observed in the short circuit current among different locations that appear identical in AFM topography. Our findings reveal the potential of MXene-integrated ETLs to enhance the nanoscale photoconduction and inherent characteristics of the active layers, thereby improving the performance of the polycrystalline photovoltaic devices.

Toward Stable Solution-Processed High-Mobility p-Type Thin Film Transistors Based on Halide Perovskites

Organolead halide perovskites have drawn significant attention from the scientific community as one of the most attractive materials in optoelectronics, especially in the field of photovoltaics. In this study, we focus on using halide perovskites in processing thin film transistors (TFTs). Halide perovskites have high solution processability and excellent carrier transport characteristics, in particular for holes. The present work aims to fill a gap in oxide-based technology. It concerns the process of using high-stable and reliable p-type oxide-based devices to target CMOS technology (complementary metal-oxide-semiconductor). We report on a solution-processed high-performance TFT based on methylammonium lead iodide (CH₃NH₃PbI₃) perovskite semiconductor films, which shows promise for devices that can be simple to manufacture with high reliability, reproducibility, and excellent stability in atmospheric conditions. To achieve a highly stable perovskite semiconductor film, we introduce diethylsulfide in the perovskite precursor. The TFT shows a stable p-type behavior when operated at low voltages (≤-2 V) and has a current modulation of >10⁴, an almost negligible hysteresis, and average saturation mobility of about 18.8 cm² V^-1 s^-1, taken over 50 devices tested (the highest one measured was ∼23.2 cm² V^-1 s^-1). This is the highest value until now reported in the literature. In addition, we demonstrate that perovskite TFTs can be fabricated at temperatures as low as 150 °C on flexible substrates with a saturation mobility of ∼11.5 cm² V^-1 s^-1. The high-performance perovskite TFT with excellent stability is a promising candidate for the next generation of p-type transistors for a plethora of low-cost electronics applications.

Comparative therapeutic efficacy of levofloxacin, ornidazole and alpha tocopherol combination with prostaglandin F2α on IL-6 and IL-10 transcript level in longstanding cases of endometritis in crossbreed Jersey cows

This study compared the therapeutic efficacy of levofloxacin, ornidazole and alpha tocopherol combination and prostaglandin F2α (PGF2α) in longstanding cases of endometritis and evaluated their impact on Interleukin-6 (IL-6) and Interleukin-10 (IL-10) transcript level in peripheral blood leukocytes. Eighteen endometritic crossbred Jersey cows were randomly allotted to three groups (six in each) viz. Group I (levofloxacin combo treatment I/U), group II (PGF2α treatment I/M), group III (no treatment, control), and group IV (six non-endometritic healthy cyclic) was taken for comparison study. The clinical efficacy was assessed by haematological study (TLC: Total leukocyte count; DC: Differential count), polymorphonuclear leukocytes (PMN) count in uterine cytology and relative mRNA expression of IL-6 and IL-10 in peripheral blood leukocytes before and after treatment with respect to conception rate following single and second inseminations. Group I and II registered significant increase in TLC and neutrophil count. PMN cytology was increased two and three fold in group I and II, respectively. The IL-6 transcript level was increased by 2.5 and 4.6 fold while that of IL-10 increased by 3.7 and 5.2 fold in group I and II, respectively. Conception rate across group I to IV following single insemination was found to be 66.67%, 50%, 16.67%, and 83.33% and their corresponding values following second insemination were 66.67%, 83.33%, 16.67%, and 83.33%, respectively. Thus, the administration of levofloxacin combo and PGF2α might have better conception rate following first and second insemination, respectively. Our study also reveals that PGF2α could register better clearance of bacteria through stronger PMN cell and cytokine activity in post-treatment period.

Imaging the Anomalous Charge Distribution Inside CsPbBr3 Perovskite Quantum Dots Sensitized Solar Cells

Highly luminescent CsPbBr₃ perovskite quantum dots (QDs) have gained huge attention in research due to their various applications in optoelectronics, including as a light absorber in photovoltaic solar cells. To improve the performances of such devices, it requires a deeper knowledge on the charge transport dynamics inside the solar cell, which are related to its power-conversion efficiency. Here, we report the successful fabrication of an all-inorganic CsPbBr₃ perovskite QD sensitized solar cell and the imaging of anomalous electrical potential distribution across the layers of the cell under different illuminations using Kelvin probe force microscopy. Carrier generation, separation, and transport capacity inside the cells are dependent on the light illumination. Large differences in surface potential between electron and hole transport layers with unbalanced carrier separation at the junction have been observed under white light (full solar spectrum) illumination. However, under monochromatic light (single wavelength of solar spectrum) illumination, poor charge transport occurred across the junction as a consequence of less difference in surface potential between the active layers. The outcome of this study provides a clear idea on the carrier dynamic processes inside the cells and corresponding surface potential across the layers under the illumination of different wavelengths of light to understand the functioning of the solar cells and ultimately for the improvement of their photovoltaic performances.

Oxide-Based Solar Cell: Impact of Layer Thicknesses on the Device Performance

A ZnO/Cu₂O-based combinatorial heterojunction device library was successfully fabricated by a simple spray pyrolysis technique using ITO-coated glass as the substrate. The combinatorial approach was introduced to analyze the impact of the ZnO and Cu₂O layer thicknesses on the performance of the solar cells. The thickness of the ZnO layer was varied from ∼50 to 320 nm, and the Cu₂O layer was deposited orthogonal to the ZnO thickness gradient. In the case of Cu₂O, the thickness varied from ∼200 to 800 nm. The photovoltaic performance of the cells is strongly dependent on the absorber layer thickness for a particular window layer thickness and reaches a maximum short-circuit current density of 3.9 mA/cm² when the absorber layer thickness just crosses ∼700 nm. Reducing the thicknesses of the active layers leads to a sharp decrease in the device performance. It is shown that the entire built-in bias of the heterojunction is created in the absorber layer due to low carrier density. The poor performance of the devices having lower thicknesses is attributed to different interfacial phenomena such as optical losses due to the thin Cu₂O layer, back-contact recombination of the carriers due to the low layer thickness because a minimum heterojunction thickness is required for the formation of the full built-in bias that slows down the recombination of the carriers, and other factors.

Observation of Space Charge Dynamics Inside an All Oxide Based Solar Cell

The charge transfer dynamics at interfaces are fundamental to know the mechanism of photovoltaic processes. The internal potential in solar cell devices depends on the basic processes of photovoltaic effect such as charge carrier generation, separation, transport, recombination, etc. Here we report the direct observation of the surface potential depth profile over the cross-section of the ZnO nanorods/Cu2O based solar cell for two different layer thicknesses at different wavelengths of light using Kelvin probe force microscopy. The topography and phase images across the cross-section of the solar cell are also observed, where the interfaces are well-defined on the nanoscale. The potential profiling results demonstrate that under white light illumination, the photoinduced electrons in Cu2O inject into ZnO due to the interfacial electric field, which results in the large difference in surface potential between two active layers. However, under a single wavelength illumination, the charge carrier generation, separation, and transport processes between two active layers are limited, which affect the surface potential images and corresponding potential depth profile. Because of changes in the active layer thicknesses, small variations have been observed in the charge carrier transport mechanism inside the device. These results provide the clear idea about the charge carrier distribution inside the solar cell in different conditions and show the perfect illumination condition for large carrier transport in a high performance solar cell.

Nutrient dynamics and seasonal variation of phytoplankton assemblages in the coastal waters of southwest Bay of Bengal

In order to understand the phytoplankton community structure and its relationship with the environmental variables in the near shore waters of Kalpakkam, east coast of India, observations were carried out during 2008-2009. Phytoplankton population was comprised of 219 species, and the density was higher during the southwest monsoon (SWM) and inter-monsoon seasons than that of north east monsoon (NEM) season. The nutrient status on a temporal and spatial scale indicated the impact of point sources carrying anthropogenic runoff. Comparison of ambient nutrient ratios with the Redfield ratio (N/P/Si = 16:1:16) showed a clear temporal variation in the factors that regulate the phytoplankton growth. SWM and inter-monsoon season was evident to have an acute N-limitation of algal growth (~76%) whereas P-limitation was encountered during the NEM season (~75%). Interestingly, a sizable population of cyanobacteria (Trichodesmium erythraeum) were noticed during NEM season when there was an exponential increase in nitrogen concentration, probably due to nitrogen fixation. No significant impact of temperature on phytoplankton proliferation was observed in situ during the study period.

Metal-free doping process to enhance the conductivity of zinc oxide nanorods retaining the transparency

The well-ordered metal oxide nanostructures can be synthesized successfully, but the conductance of these structures is limited, which is a disadvantage for applying these in photovoltaic and display devices. Conductivity of a semiconductor can be improved by using metal doping, but the issue becomes a major challenge in nanostructures since their high surface energy usually hinders any metal doping process. Here we show an entirely new metal-free doping strategy to enhance the current conduction of ZnO nanorods' (NRs) arrays through a sulphidation technique. The process is based on the electronegativity difference between S and O because of which one can expect a rigorous bond rearrangement at the interface and a ZnOS-ZnS composite is formed as O is being partially replaced by S. The current conduction by the metal oxide NRs arrays is significantly enhanced by nearly 4 orders of magnitude without sacrificing the transparency of the NRs arrays. The increased current conduction is assigned due to an increase in the Zn(i) concentration as evidenced from the electron paramagnetic resonance measurements. The composite layer grown on p-Si forms a photodiode which is highly sensitive to visible light with a very fast response time.

Core-shell TiO2@ZnO nanorods for efficient ultraviolet photodetection

Core-shell TiO(2)@ZnO nanorods (NRs) have been fabricated by a simple two step method: growth of ZnO NRs' array by an aqueous chemical technique and then coating of the NRs with a solution of titanium isopropoxide [Ti(OC(3)H(7))(4)] followed by a heating step to form the shell. The core-shell nanocomposites are composed of single-crystalline ZnO NRs, coated with a thin TiO(2) shell layer obtained by varying the number of coatings (one, three and five times). The ultraviolet (UV) emission intensity of the nanocomposite is largely quenched due to an efficient electron-hole separation reducing the band-to-band recombinations. The UV photoconductivity of the core-shell structure with three times TiO(2) coating has been largely enhanced due to photoelectron transfer between the core and the shell. The UV photosensitivity of the nanocomposite becomes four times larger while the photocurrent decay during steady UV illumination has been decreased almost by 7 times compared to the as-grown ZnO NRs indicating high efficiency of these core-shell structures as UV sensors.

Encapsulation of 2-3-nm-sized ZnO quantum dots in a SiO2 matrix and observation of negative photoconductivity

Quantum dots (QDs) of ZnO of 2-4 nm size have been encapsulated within a SiO(2) matrix using aqueous chemically grown ZnO nanoparticles in a precursor of tetraethyl orthosilicate. The microstructure shows almost a uniform embedment of the QDs in the SiO(2) matrix, resulting in a ZnO QDs-SiO(2) composite structure. The photocurrent transients of the composite show an instant fall in the current followed by an exponential decay under ultraviolet (UV) illumination, causing negative photoconductivity (NPC), in contrast to the positive photoconductivity in only ZnO nanoparticles. The interface defect states due to the presence of the SiO(2) network around ZnO act as charge trap centers for the photoexcited electrons and are responsible for the NPC. The presence of interface-trapped charges under UV illumination has been further confirmed from capacitance-voltage measurements.

Nonmyeloablative stem cell transplantation for the treatment of cancer and life-threatening nonmalignant disorders: past accomplishments and future goals

Allogeneic bone marrow transplantation (BMT) or blood stem cell transplantation represents an important therapeutic tool for the treatment of otherwise incurable malignant and nonmalignant diseases. Until recently. autologous and allogeneic BMT or mobilized blood stem cell transplantation was used primarily to replace a malignant, genetically abnormal, or deficient immunohematopoietic compartment, and therefore highly toxic myeloablative regimens were considered mandatory for eradication of all undesirable host-derived hematopoietic elements. Our preclinical and ongoing clinical studies have indicated that more effective eradication of host immunohematopoietic system cells could be achieved by adoptive allogeneic cell therapy with donor lymphocyte infusion following BMT. Thus eradication of blood cancer cells, especially in patients with chronic myelogenous leukemia and less frequently in patients with other hematologic malignancies, can frequently be achieved despite complete resistance of such tumor cells to the maximum tolerated doses of chemoradiotherapy. Our cumulative experience suggests that graft vs leukemia (GVL) effects might be a useful tool for eradication of otherwise resistant tumor cells of host origin. Based on the cumulative clinical experience and experimental data in animal models of human diseases, it appears that induction of host vs graft tolerance as the first step may allow durable engraftment of immunocompetent donor lymphocytes, which may be used for induction of effective biologic warfare against host-type immunohematopoietic cells that need to be replaced, whether they are malignant, genetically abnormal, or self-reactive. Based on this rationale, we speculate that the therapeutic benefit of BMT may be increased by using safer conditioning as part of the transplantation procedure, with the goal of inducing host vs graft tolerance to enable subsequent induction of GVL, possibly graft vs tumor, or even graft vs autoimmunity effects, rather than attempting to eliminate host cells with hazardous myeloablative chemoradiotherapy. Our hypothesis suggests that effective BMT procedures might be accomplished without lethal conditioning of the host, using new, well-tolerated nonmyeloablative regimens, possibly minimizing immediate and late side effects related to myeloablative procedures. Recent clinical data suggest that effective BMT procedures may be accomplished with nonmyeloablative stem cell transplantation (NST) regimens, with no major toxicity. Thus new NST approaches may make BMT procedures safer for a spectrum of clinical indications in children and elderly individuals without lower or upper age limits, while minimizing procedure-related toxicity and mortality. Our cumulative data suggest that high-dose chemotherapy and radiation therapy may be successively replaced by more effective alloreactive donor lymphocytes, thus setting the stage for innovative therapeutic procedures with safer and more effective treatment of patients requiring BMT.

Non-myeloablative allogeneic stem cell transplantation focusing on immunotherapy of life-threatening malignant and non-malignant diseases

Allogeneic bone marrow transplantation (BMT) represents an important therapeutic tool for treatment of otherwise incurable malignant and non-malignant diseases. Until recently, myeloablative regimens were considered mandatory for eradication of all undesirable host-derived hematopoietic elements. Our preclinical and ongoing clinical studies indicated that much more effective eradication of host immunohematopoietic system cells could be achieved by adoptive allogeneic cell therapy with donor lymphocyte infusion (DLI) following BMT. Thus, eradication of blood cancer cells, especially in patients with CML can be frequently accomplished despite complete resistance of such tumor cells to maximally tolerated doses of chemoradiotherapy. Our cumulative experience suggested that graft versus leukemia (GVL) effects might be a useful tool for eradication of otherwise resistant tumor cells of host origin. The latter working hypothesis suggested that effective BMT procedures may be accomplished without lethal conditioning of the host, using new well tolerated non-myeloablative regimen, thus possibly minimizing immediate and late side effects related to myeloablative procedures considered until recently mandatory for conditioning of BMT recipients. Recent clinical data that will be presented suggests that safe non-myeloablative stem cell transplantation (NST), with no major toxicity can replace the conventional BMT. Thus, NST may provide an option for cure for a large spectrum of clinical indications in children and elderly individuals without lower or upper age limit, while minimizing procedure-related toxicity and mortality.

Indolent aspergillus arthritis complicating fludarabine-based non-myeloablative stem cell transplantation

Fungal arthritis and osteomyelitis are rare and documented mainly in immunocompromised or neutropenic patients. Patients receiving therapeutic immunosuppression for organ transplants have also reported to suffer from aspergillus osteoarthritis. We describe two patients with aspergillus arthritis of the knee joint following fludarabine-based non-myeloablative stem cell transplantation. Both were suffering from acute and chronic GVHD and treated with heavy immunosuppression including steroids and cyclosporine. Interestingly in one of our patients, the arthritis was almost asymptomatic and did not spread to other organs. Heavy pre- and post-transplant immunosuppression is a major risk factor for invasive fungal infection, which can involve remote organs and manifest in an indolent and atypical manner.

Moisture prediction from simple micrometeorological data

ABSTRACT Four linear regression methods and a generalized regression neural network (GRNN) were evaluated for estimation of moisture occurrence and duration at the flag leaf level of wheat. Moisture on a flat-plate resistance sensor was predicted by time, temperature, relative humidity, wind speed, solar radiation, and precipitation provided by an automated weather station. Dew onset was estimated by a classification regression tree model. The models were developed using micrometeorological data measured from 1993 to 1995 and tested on data from 1996 and 1997. The GRNN outperformed the linear regression methods in predicting moisture occurrence with and without dew estimation as well as in predicting duration of moisture periods. Average absolute error for prediction of moisture occurrence by GRNN was at least 31% smaller than that obtained by the linear regression methods. Moreover, the GRNN correctly predicted 92.7% of the moisture duration periods critical to disease development in the test data, while the best linear method correctly predicted only 86.6% for the same data. Temporal error distribution in prediction of moisture periods was more highly concentrated around the correct value for the GRNN than linear regression methods. Neural network technology is a promising tool for reasonably precise and accurate moisture monitoring in plant disease management.

The nutritive value of stackburned yellow maize for livestock: tests in vitro and in broiler chicks

Difference in the nutritive value of four grades of stackburned yellow maize, obtained from a single storage unit in Mozambique, were examined. Samples were analysed for chemical composition, and subjected to the following in vitro assays for estimating digestibility: total dietary fibre and pancreatin for non-ruminants, and gas production using sheep rumen fluid for ruminant livestock. Samples were also fed to broiler chicks at 600 g/kg diet in a growth trial. There were no significant differences in crude protein contents of the maize samples, but there was evidence for the development of Maillard reaction products. Detectable amino acids were lower in discoloured maize, with decreases of 52% in lysine, 35% in arginine, and 15% in glycine concentration in the most severely discoloured sample compared with control. Total starch, reducing sugar, acid-detergent fibre and amylase-neutral-detergent fibre values increased, while total non-reducing sugar content decreased with increased discolouration. Total dietary fibre and pancreatin assays indicated a lowering in digestibility of maize with increasing discolouration. Weight gain of chicks (P = 0.0228), efficiency of feed utilization (P = 0.0009) and the metabolizable energy value of diets decreased (P < 0.0001) with increasing stackburn discolouration. There were no significant effects on N retention of diets. In vitro fermentation using sheep rumen fluid showed a linear decrease in gas production with increasing maize discolouration, indicating a reduction in rumen degradability with stackburn.

Effects on dietary phosphorus of treating cottonseed meal with crystalline ferrous sulphate for the prevention of brown yolk discolouration

1. Two experiments were carried out to examine whether the adverse effects on laying hen performance of treating cottonseed meal (CSM) with crystalline ferrous sulphate heptahydrate (FSH) to prevent brown yolk discolouration, was a consequence of iron reducing the availability of dietary phosphorus. Two batches of CSM, with different free gossypol and cyclopropenoid fatty acid contents, were treated with FSH at a 4:1 weight ratio of iron to free gossypol, and incorporated into diets at 300 g/kg with or without supplementation with sodium dihydrogen phosphate (SHP), and fed to hens. 2. FSH treatment of CSM reduced food intake and egg production. Although performance was improved by supplementing the FSH-treated CSM diets with SHP, it was still poorer than that achieved by hens fed a non-CSM control diet. 3. Brown yolk discolouration was prevented by treatment of CSM with FSH. Additional phosphorus did not produce any significant effects on brown colour development in yolks, indicating that the bioavailable gossypol content of the diets had not been altered; however, chemical analyses showed an apparent increase in the free gossypol content of the diets with the inclusion of SHP, suggesting that the assay gives misleading results.

Effects of oven-drying tubers of two high-protein sweet potato varieties at different temperatures on their feeding value in broilers

1. Unpeeled tubers from 2 high-protein varieties of sweet potato (white-fleshed Bosbok, and orange-fleshed Carmel) were chipped and oven-dried at 40, 60, or 80 degrees C, to examine the effects on nutritive value. The dried ground chips were substituted for maize at 500 g/kg and the diets fed to day-old, Ross-1 broiler chicks for 3 weeks. 2. Compared with Carmel, Bosbok had a lower crude protein content (90 V. 138 g/kg DM) and trypsin inhibitor activity (TIA) (3 v. 5 mg of trypsin inhibited per g flour). Processing did not significantly affect TIA, but the lysine and cystine contents were lowered and the starch content raised as the drying temperature increased. However, whereas this was reflected in increased reducing sugars in Carmel, there was no trend in Bosbok. 3. The results of in vitro pancreatin digestibility and total dietary fibre assays showed variety and processing temperature to be significant factors influencing the nutritive value of sweet potato tubers, with a variety temperature interaction also being indicated. The interaction was also observed for weight gain, dry matter intake, water: food intake ratios, excreta water content, presence of bile in excreta and liver weights. The best growth was obtained with Bosbok dried at 60 degrees C , for which liveweights at 21 d were 11% lower than for the maize controls.

Bioassay of mycotoxins using terrestrial and aquatic, animal and plant species

The role of bioassay in the diagnosis of mycotoxicoses in farm animals is discussed. Methods for detecting mycotoxin contamination of animal feeds using biological species (aquatic and terrestrial animals and plants but excluding bacteria and yeast) are reviewed. Factors that need to be considered when choosing and using particular bioassay procedures in a feed-screening programme are discussed in relation to the occurrence of false positives and false negatives.

Effects of different rates of drying cassava root on its toxicity to broiler chicks

1. The effects of drying cassava root at different rates on its composition and toxicity to broiler chicks were examined. Unpeeled roots from a high-cyanide cultivar of cassava were chipped and dried at 25 degrees C to a moisture content of below 100 g/kg over 24 h for fast-dried meal (FD) or 72 h for slow-dried meal (SD). The meals were incorporated at 250 and 500 g/kg into semi-synthetic diets which were fed to day-old broiler chicks as mash or pellets in separate experiments. 2. The two drying rates produced meals with similar concentrations of polyphenols, but different concentrations of cyanogens, the latter being 38 and 482 mg total cyanide/kg for SD and FD, respectively. The linamarin, acetonecyanohydrin or total cyanide content measurements of pelleted diets were highly correlated. 3. Growth rates of chicks fed on SD-based diets were significantly higher than those of chicks fed on FD-based diets. Compared with a control diet, weight gain of chicks fed on the 500 g FD/kg diet (containing 258 mg total cyanide/kg) was 77% lower, although performance also appeared to be reduced at 142 mg total cyanide/kg. 4. The ratio of water:food intake of chicks was higher in FD than in SD groups, and this was reflected in the high water content of excreta. There was increased bile excretion, the chloretic effect increasing with the cyanogen content of diet. Pancreas weights were lower in FD than in SD groups in experiment 1 (mash diets), but not in experiment 2 (pelleted diets), while there was a significant interaction between drying method and cassava inclusion rate on liver weight in experiment 2, but not in experiment 1. There were no effects on the mortality rate. 5. Pelleting of diets generated high temperatures, but did not significantly alter the cyanogen concentration or the growth of the chicks. 6. Thus, slower rates of drying cassava roots produce meals with lower cyanogen concentration that are, consequently, less toxic to broiler chicks. Cassava root meal of less than 40 mg total cyanide/kg can be fed to broiler chicks at 500 g/kg without any adverse effects.

Evaluation of the nutritive value of yellow rice in rats and broiler chicks

Yellow discoloration often develops in rice kernels during post-harvest storage, due possibly to fungal activity. The present study examined the changes in nutrient composition taking place during yellowing of rice, and the effects of feeding rats and broiler chicks on a moderately yellow rice at 600 g/kg diet. Nitrogen content was found to be higher in rice grains that had become more yellow, only part of the increase being in non-protein-N; however, relative to crude protein (N x 6.25) the concentrations of lysine, methionine, cystine and arginine were lower. There were no significant differences between white and yellow rice in the food intake, weight gain and efficiency of food utilization (EFU) of rats and chicks when diets were formulated to contain similar nutrient concentrations, or the same basal ingredient composition. Diet pelleting increased food intake and weight gain in both animal species, but reduced dry matter and energy digestibility in rats; effects on nutrient retention in chicks were largely non-significant. Liver weights of rats and chicks and pancreas weights of chicks were unaffected by yellow rice; however, chicks fed on mash had a larger pancreas on average than those fed on pellets. Thus, whilst the nutrient composition of rice is altered during yellowing, a moderately yellow rice is unlikely to produce major adverse effects when fed to rats and broiler chicks.

Effects of different copra meals and amino acid supplementation on broiler chick growth

1. The effects of including copra meals from different sources in nutritionally-balanced broiler chick diets were compared. A meal screw press-expelled twice to contain 75 g residual lipid/kg produced a lower growth rate than a meal pressed once to contain 220 g lipid/kg. 2. Chicks fed copra meal at 400 g/kg diet had a higher growth rate on a diet formulated to contain 12.4 g lysine/kg and 8.3 g methionine+cystine/kg than on a diet containing 13.5 and 9.0 g/kg of the respective amino acids; however, in a second experiment performance of chicks was unaffected when the low amino acid, low-oil copra meal-based diet was supplemented with synthetic amino acids.

Effects of dietary cottonseed meal and iron-treated cottonseed meal in different laying hen genotypes

The effects of dietary screw-pressed cottonseed meal (CSM) and iron-treated CSM on laying performance and discolourations in eggs were examined in a range of hen genotypes. In experiment 1, six genotypes, obtained at point-of-lay from various sources, were fed on a non-CSM diet, a diet with 300 g CSM/kg, and a diet containing iron-treated CSM at 300 g/kg. In experiment 2, two of these genotypes were reared together from day-old and were fed from 10 to 18 weeks on a non-CSM diet or a diet containing iron-treated CSM at 250 g/kg. They were then fed on a non-CSM layer diet or a diet containing iron-treated CSM at 300 g/kg, in a 2 x 2 x 2 factorial design that also examined the effects of the rearing diet. 2. The effects on food intakes and egg production of including CSM and iron-treated CSM in layer diets depended on the genotype of the hens. The strongest interaction between breed and diet was on food intake, the breed Hubbard Golden Comet (HGC) being the least tolerant of CSM and iron-treated CSM. 3. Inclusion of iron-treated CSM in the rearer diet to supply approximately 70% of the dietary protein had no adverse effects on growth or age at first egg. Food intake and egg production between 18 and 26 weeks were affected by the iron-treated CSM layer diet, but there were no carry-over effects attributable to the rearing diets. 4. Genotype was not a factor in the development of the gossypol-related brown yolk discolouration in fresh or warm-stored eggs of hens fed on a CSM-based diet containing 197 mg free gossypol/kg and 52 mg cyclopropenoid fatty acids (CPFA)/kg (experiment 1). 5. In both experiments, the susceptibility of eggs to the CPFA-related cold storage effects depended on the genotype of the hen, eggs from hens of the HCG breed being more affected than those of ISA hens. 6. Treatment of CSM with crystalline ferrous sulphate heptahydrate, at a 4:1 weight ratio of iron to free gossypol, prevented brown yolk discolourations in all genotypes tested, as assessed by subjecting egg yolks to atmospheres of ammonia, and cold storage of eggs.

Effects of dietary cottonseed meal, with and without iron treatment, on laying hens

1. The effects of feeding a screw-press expelled cottonseed meal (CSM) to laying hens at dietary concentrations of up to 300 g/kg, were studied over a 10 week period. 2. The overall performance of hens fed on a 75g CSM/kg diet was not significantly different from controls but a 300g CSM/kg diet, containing 255 mg free gossypol/kg and 87 mg cyclopropenoid fatty acids (CPFA)/kg and giving daily intakes per hen of 26.2 mg free gossypol and 9.0 mg CPFA, significantly reduced food intake (P less than 0.01) and egg production (P less than 0.01). The 150g CSM/kg diet (daily intakes of 14.6 mg free gossypol and 4.8 mg CPFA per hen) did not produce adverse effects initially but egg production was slightly depressed towards the end of the experimental period. 3. Treatment of the CSM with a solution of ferrous sulphate hepta-hydrate for inclusion in a 300g CSM/kg diet (100 mg/kg supplemental dietary iron) further reduced food intake (P less than 0.05) and egg production (P less than 0.05). 4. Storage of eggs at warm temperatures for up to 1 month did not lead to discolourations of any kind in the CSM diet groups, but resulted in yolk mottling, a condition reduced by treatment of the CSM with iron. 5. Storage of eggs at cold temperatures for 3 months resulted in brown yolk discolouration and the initial stages of pink albumen discolouration in the 300g CSM/kg diet group; the brown yolk discolouration was reduced by treatment of the CSM with iron.

Effects of atmospheric ammonia on chick embryo development

1. Two experiments were carried out in which fertile, White Leghorn eggs were individually subjected to atmospheric ammonia, for 24 h before incubation, in order to examine the effects on embryo development. 2. In experiment 1, development was unaffected by 0.35 mg/l (493 microliters/l) atmospheric ammonia and slightly reduced by 0.7 mg/l (986 microliters/l) while 7 mg/l (9,860 microliters/l) produced 100% mortality. In experiment 2, embryo development was unaffected by 0.35 mg/l atmospheric ammonia, but severely reduced by 3.15 mg/l (4,437 microliters/l).