Photo-Cross-Linked Fullerene-Based Hole Transport Material for Moisture-Resistant Regular Fullerene Sandwich Perovskite Solar Cells

Despite the high efficiencies currently achieved with perovskite solar cells (PSCs), the need to develop stable devices, particularly in humid conditions, still remains. This study presents the synthesis of a novel photo-cross-linkable fullerene-based hole transport material named FT12. For the first time, the photo-cross-linking process is applied to PSCs, resulting in the preparation of photo-cross-linked FT12 (PCL FT12). Regular PSCs based on C60-sandwich architectures were fabricated using FT12 and PCL FT12 as dopant-free hole transport layers (HTLs) and compared to the reference spiro-OMeTAD. The photovoltaic results demonstrate that both FT12 and PCL FT12 significantly outperform pristine spiro-OMeTAD regarding device performance and stability. The comparison between devices based on FT12 and PCL FT12 demonstrates that the photo-cross-linking process enhances device efficiency. This improvement is primarily attributed to enhanced charge extraction, partial oxidation of the HTL, increased hole mobility, and improved layer morphology. PCL FT12-based devices exhibit improved stability compared to FT12 devices, primarily due to the superior moisture resistance achieved through photo-cross-linking.

Green synthesis of fluorescent carbon nanodots from sage leaves for selective anticancer activity on 2D liver cancer cells and 3D multicellular tumor spheroids

Carbon nanodots, a family of carbon-based nanomaterials, have been synthesized through different methods from various resources, affecting the properties of the resulting product and their application. Herein, carbon nanodots (CNDs) were synthesized with a green and simple hydrothermal method from sage leaves at 200 °C for 6 hours. The obtained CNDs are well dispersed in water with a negative surface charge (ζ-potential = -11 mV) and an average particle size of 3.6 nm. The synthesized CNDs showed concentration-dependent anticancer activity toward liver cancer (Hep3B) cell lines and decreased the viability of the cancer cells to 23% at the highest used concentration (250 μg ml-1 of CNDs). More interestingly, the cytotoxicity of the CNDs was tested in normal liver cell lines (LX2) revealed that the CNDs at all tested concentrations didn't affect their viability including at the highest concentration showing a viability of 86.7%. The cellular uptake mechanisms of CNDs were investigated and they are thought to be through energy-dependent endocytosis and also through passive diffusion. The main mechanisms of endocytosis were lipid and caveolae-mediated endocytosis. In addition, the CNDs have hindered the formation of 3D spheroids from the Hep3B hepatocellular carcinoma cell line. Hence, it would be concluded that the synthesized CNDs from sage are more highly selective to liver cancer cells than normal ones. The CNDs' cancer-killing ability would be referred to as the production of reactive oxygen species.

p-Type Functionalized Carbon Nanohorns and Nanotubes in Perovskite Solar Cells

The incorporation of p-type functionalized carbon nanohorns (CNHs) in perovskite solar cells (PSCs) and their comparison with p-type functionalized single- and double-walled carbon nanotubes (SWCNTs and DWCNTs) are reported in this study for the first time. These p-type functionalized carbon nanomaterial (CNM) derivatives were successfully synthesized by [2 + 1] cycloaddition reaction with nitrenes formed from triphenylamine (TPA) and 9-phenyl carbazole (Cz)-based azides, yielding CNHs-TPA, CNHs-Cz, SWCNTs-Cz, SWCNTs-TPA, DWCNTs-TPA, and DWCNTs-Cz. These six novel CNMs were incorporated into the spiro-OMeTAD-based hole transport layer (HTL) to evaluate their impact on regular mesoporous PSCs. The photovoltaic results indicate that all p-type functionalized CNMs significantly improve the power conversion efficiency (PCE), mainly by enhancing the short-circuit current density (Jsc) and fill factor (FF). TPA-functionalized derivatives increased the PCE by 12-17% compared to the control device without CNMs, while Cz-functionalized derivatives resulted in a PCE increase of 4-8%. Devices prepared with p-type functionalized CNHs exhibited a slightly better PCE compared with those based on SWCNTs and DWCNTs derivatives. The increase in hole mobility of spiro-OMeTAD, additional p-type doping, better energy alignment with the perovskite layer, and enhanced morphology and contact interface play important roles in enhancing the performance of the device. Furthermore, the incorporation of p-type functionalized CNMs into the spiro-OMeTAD layer increased device stability by improving the hydrophobicity of the layer and enhancing the hole transport across the MAPI/spiro-OMeTAD interface. After 28 days under ambient conditions and darkness, TPA-functionalized CNMs maintained the performance of the device by over 90%, while Cz-functionalized CNMs preserved it between 75 and 85%.

Understanding the Degradation of Methylenediammonium and Its Role in Phase-Stabilizing Formamidinium Lead Triiodide

Formamidinium lead triiodide (FAPbI₃) is the leading candidate for single-junction metal-halide perovskite photovoltaics, despite the metastability of this phase. To enhance its ambient-phase stability and produce world-record photovoltaic efficiencies, methylenediammonium dichloride (MDACl₂) has been used as an additive in FAPbI₃. MDA²⁺ has been reported as incorporated into the perovskite lattice alongside Cl^-. However, the precise function and role of MDA²⁺ remain uncertain. Here, we grow FAPbI₃ single crystals from a solution containing MDACl₂ (FAPbI₃-M). We demonstrate that FAPbI₃-M crystals are stable against transformation to the photoinactive δ-phase for more than one year under ambient conditions. Critically, we reveal that MDA²⁺ is not the direct cause of the enhanced material stability. Instead, MDA²⁺ degrades rapidly to produce ammonium and methaniminium, which subsequently oligomerizes to yield hexamethylenetetramine (HMTA). FAPbI₃ crystals grown from a solution containing HMTA (FAPbI₃-H) replicate the enhanced α-phase stability of FAPbI₃-M. However, we further determine that HMTA is unstable in the perovskite precursor solution, where reaction with FA⁺ is possible, leading instead to the formation of tetrahydrotriazinium (THTZ-H⁺). By a combination of liquid- and solid-state NMR techniques, we show that THTZ-H⁺ is selectively incorporated into the bulk of both FAPbI₃-M and FAPbI₃-H at ∼0.5 mol % and infer that this addition is responsible for the improved α-phase stability.

Understanding the impact of surface roughness: changing from FTO to ITO to PEN/ITO for flexible perovskite solar cells

So far, single-junction flexible PSCs have been lacking in efficiency compared to rigid PSCs. Recently, > 23% have been reported. We therefore focus on understanding the differences between rigid and flexible substrates. One often neglected parameter is the different surface roughness which directly affects the perovskite film formation. Therefore, we adjust the layer thickness of SnO₂ and the perovskite layers. Furthermore, we introduce a PMMA layer between the perovskite and the hole transporting material (HTM), spiro-MeOTAD, to mitigate shunting pathways. In addition, the multication perovskite Rb_0.02Cs_0.05FA_0.77MA_0.16Pb(I_0.83Br_0.17)₃ is employed, resulting in stabilized performances of 16% for a flexible ITO substrate and 19% on a rigid ITO substrate.

Efficient and Stable Perovskite Solar Cells based on Nitrogen-Doped Carbon Nanodots

The role of graphitic and amorphous nitrogen-doped carbon dots (N-CDs) as additives for perovskite solar cells (PSCs) is investigated. A detailed study of N-CDs: perovskite (PVSK) blends through X-ray diffraction, nuclear magnetic resonance, field emission scanning electron microscopy, UV-vis, and photoluminescence spectroscopy reveals the existence of interactions between N-CDs and PVSK. The amorphous or graphitic nature of these carbon nanoforms, as well as the interactions between CDs and PVSK, clearly determines the photovoltaic outcome of the PSCs. Thus, a small amount of graphitic carbon dots (g-N-CDs) leads to more-stable PSCs, while maintaining and even improving the power conversion efficiency (PCE). In addition, the long-term evaluation of the g-N-CDs-containing cells shows improvement of the PCE over time, up to 109% of the initial efficiency after 40 days while the reference performance is dropped to 86%.

Triarylamine Enriched Organostannoxane Drums: Synthesis, Optoelectrochemical Properties, Association Studies, and Gelation Behavior

The straightforward synthesis of three organotin clusters endowed with six triarylamine-based moieties is reported herein. The optoelectronic properties of the molecules, as well as their ability to form gels, were investigated. The association ability of the compounds was studied as well by means of variable temperature nuclear magnetic resonance (NMR) and ultraviolet-visible (UV-vis) spectroscopy. The optimization of the geometry of the compounds has been performed and compared to the X-ray diffraction of the crystals. The results obtained through this comparison are useful for the explanation of their different gelation behaviors. In fact, organostannoxane drum 1 exhibits a strong ability to form organized supramolecular structures by means of a number of noncovalent short contacts that finally yield luminescent organogels in aromatic solvents.

Dendritic-Like Molecules Built on a Pillar[5]arene Core as Hole Transporting Materials for Perovskite Solar Cells

Invited for the cover of this issue are the groups of S. Seki (Kyoto), G. Reginato (Sesto Fiorentino), J.-F. Nierengarten (Strasbourg), A. Abate (Berlin) and J. L. Delgado (San Sebastian). The image depicts an artistic view of a dendrimer-like hole transporting material at work in a perovskite solar cell. Read the full text of the article at 10.1002/chem.202101110.

Dendritic-Like Molecules Built on a Pillar[5]arene Core as Hole Transporting Materials for Perovskite Solar Cells

Multi-branched molecules have recently demonstrated interesting behaviour as charge-transporting materials within the fields of perovskite solar cells (PSCs). For this reason, extended triarylamine dendrons have been grafted onto a pillar[5]arene core to generate dendrimer-like compounds, which have been used as hole-transporting materials (HTMs) for PSCs. The performances of the solar cells containing these novel compounds have been extensively investigated. Interestingly, a positive dendritic effect has been evidenced as the hole transporting properties are improved when going from the first to the second-generation compound. The stability of the devices based on the best performing pillar[5]arene material has been also evaluated in a high-throughput ageing setup for 500 h at high temperature. When compared to reference devices prepared from spiro-OMeTAD, the behaviour is similar. An analysis of the economic advantages arising from the use of the pillar[5]arene-based material revealed however that our pillar[5]arene-based material is cheaper than the reference.

Poly(ethylene glycol)-[60]Fullerene-Based Materials for Perovskite Solar Cells with Improved Moisture Resistance and Reduced Hysteresis

A series of [60]fullerenes covalently functionalized with the polymer poly(ethylene glycol) is presented. These new [60]fullerene-based materials have been incorporated as additives in CH₃ NH₃ PbI₃ (MAPbI₃ ), the most common organic-inorganic perovskite used in perovskite solar cells. The extensive photovoltaic study performed by using these materials shows several beneficial effects on the performance of these cells, including a reduction in hysteresis and an increased stability against moisture, whereby the solar cells retain up to 97 % of their initial power conversion efficiency in an ambient atmosphere.

Modified Fullerenes for Efficient Electron Transport Layer-Free Perovskite/Fullerene Blend-Based Solar Cells

A variety of novel chemically modified fullerenes, showing different electron-accepting capabilities, has been synthesized and used to prepare electron transport layer (ETL)-free solar cells based on perovskite/fullerene blends. In particular, isoxazolino[60] fullerenes are proven to be a good candidate for processing blend films with CH₃ NH₃ PbI₃ and obtaining enhanced power conversion efficiency (PCE) ETL-free perovskite solar cells (PSCs), improving the state-of-the-art PCE (i.e., 14.3 %) for this simplified device architecture. A beneficial effect for pyrazolino and methano[60]fullerene derivatives versus pristine [60]/fullerene is also shown. Furthermore, a clear correlation between the LUMO energy level of the fullerene component and the open circuit voltage of the solar cells is found. Apart from the new knowledge on innovative fullerene derivatives for PSCs, the universality and versatility of perovskite/fullerene blend films to obtain efficient ETL-free PSCs is demonstrated.

Efficient Regular Perovskite Solar Cells Based on Pristine [70]Fullerene as Electron-Selective Contact

[70]Fullerene is presented as an efficient alternative electron-selective contact (ESC) for regular-architecture perovskite solar cells (PSCs). A smart and simple, well-described solution processing protocol for the preparation of [70]- and [60]fullerene-based solar cells, namely the fullerene saturation approach (FSA), allowed us to obtain similar power conversion efficiencies for both fullerene materials (i.e., 10.4 and 11.4 % for [70]- and [60]fullerene-based devices, respectively). Importantly, despite the low electron mobility and significant visible-light absorption of [70]fullerene, the presented protocol allows the employment of [70]fullerene as an efficient ESC. The [70]fullerene film thickness and its solubility in the perovskite processing solutions are crucial parameters, which can be controlled by the use of this simple solution processing protocol. The damage to the [70]fullerene film through dissolution during the perovskite deposition is avoided through the saturation of the perovskite processing solution with [70]fullerene. Additionally, this fullerene-saturation strategy improves the performance of the perovskite film significantly and enhances the power conversion efficiency of solar cells based on different ESCs (i.e., [60]fullerene, [70]fullerene, and TiO2 ). Therefore, this universal solution processing protocol widens the opportunities for the further development of PSCs.

Organic Charge Carriers for Perovskite Solar Cells

The photovoltaic field is currently experiencing the "perovskite revolution". These materials have been known for decades, but only recently have they been applied in solid-state solar cells to obtain outstanding power conversion efficiencies. Given that the variety of perovskites used so far is limited, a lot of attention has been devoted to the development of suitable organic charge-transport materials to improve device performance. In this article, we will focus on the most promising materials able to transport electrons or holes from a structural point of view. Thereby, we focus on organic materials owing to their ease of preparation and manipulation, and this is nicely combined with the potential tuning of their properties through chemical synthesis.