The Validity of the Push Band 2.0 during Vertical Jump Performance

The Push Band has the potential to provide a cheap and practical method of measuring velocity and power during countermovement vertical jumping (CMJ). However, very little is known about whether it conforms to laboratory-based gold standards. The aim of this study was to assess the agreement between peak and mean velocity and power obtained from the belt-worn Push Band, and derived from three-dimensional motion capture, and vertical force from an in-ground force platform. Twenty-two volunteers performed 3 CMJ on a force platform, while a belt-worn Push Band and a motion capture system (a marker affixed to the Push Band) simultaneously recorded data that enabled peak and mean velocity and power to be calculated and then compared using ordinary least products regression. While the Push Band is reliable, it tends to overestimate peak (9–17%) and mean (24–27%) velocity, and when compared to force plate-derived peak and mean power, it tends to underestimate (40–45%) and demonstrates fixed and proportional bias. This suggests that while the Push Band may provide a useful method for measuring peak and mean velocity during the CMJ, researchers and practitioners should be mindful of its tendency to systematically overestimate and that its measures of peak and mean power should not be used.

The reliability and validity of the bar-mounted PUSH BandTM 2.0 during bench press with moderate and heavy loads

The aim of this study was to assess the reliability and validity of the bar-mounted PUSH Band^TM 2.0 to determine peak and mean velocity during the bench press exercise with a moderate (60% one repetition maximum [1RM]) and heavy (90% 1RM) load. We did this by simultaneously recording peak and mean velocity using the PUSH Band^TM 2.0 and three-dimensional motion capture from participants bench pressing with 60% and 90% 1RM. We used ordinary least products regression to assess within-session reliability and whether the PUSH Band^TM 2.0 could accurately predict motion capture velocity. Results showed that PUSH Band^TM 2.0 and motion capture peak and mean velocity reliability was acceptable with both loads. While there was a tendency for the PUSH Band^TM 2.0 to slightly overestimate peak and mean velocity, there was no fixed bias. However, mean velocity with 60 and 90% 1RM demonstrated proportional bias (differences between predicted and motion capture values increase with magnitude). Therefore, PUSH Band^TM 2.0 peak velocity with 60 and 90% 1RM is valid, but mean velocity is not.

Improved accuracy of biomechanical motion data obtained during impacts using a time-frequency low-pass filter

Biomechanical motion data involving impacts are not adequately represented using conventional low-pass filters (CF). Time-frequency filters (TFF) are a viable alternative, but have been largely overlooked by movement scientists. We modified Georgakis and Subramaniam's (2009) fractional Fourier filter (MFrFF) and demonstrated it performed better than CFs for obtaining lower leg accelerations during football instep kicking. The MFrFF displayed peak marker accelerations comparable to a reference accelerometer during foot-to-ball impact (peak % error = -5.0 ± 11.4%), whereas CFs severely underestimated these peaks (30-70% error). During the non-impact phases, the MFrFF performed comparably to CFs using an appropriate (12-20 Hz) cut-off frequency (RMSE = 37.3 ± 7.6 m/s² vs. 42.1 ± 11.4 m/s², respectively). Since accuracy of segmental kinematics is fundamental for understanding human movement, the MFrFF should be applied to a range of biomechanical impact scenarios (e.g. locomotion, landing and striking motions) to enhance the efficacy of study in these areas.

Whole-body energy transfer strategies during football instep kicking: implications for training practices

Knowledge of whole-body energy transfer strategies during football instep kicking can help inform empirically grounded training practices. The aim of this study was thus to investigate energy transfer strategies of 15 semi-professional players performing kicks for speed and accuracy. Three-dimensional kinematics and GRFs (both 1000 Hz) were incorporated into segment power analyses to derive energy transfers between the support leg, torso, pelvis and kick leg throughout the kick. Energy transferred from support leg (r = 0.62, P = 0.013) and torso (r = 0.54, P = 0.016) into the pelvis during tension arc formation and leg cocking was redistributed to the kick leg during the downswing (r = 0.76, P < 0.001) and were associated with faster foot velocities at ball contact. This highlights whole-body function during instep kicking. Of particular importance were: (a) regulating support leg energy absorption, (b) eccentric formation and concentric release of a 'tension arc' between the torso and kicking hip, and (c) coordinated proximal to distal sequencing of the kick leg. Resistance exercises that replicate the demands of these interactions may help develop more powerful kicking motions and varying task and/or environmental constraints might facilitate development of adaptable energy transfer strategies.

The effect of approach velocity on pelvis and kick leg angular momentum conversion strategies during football instep kicking

During football instep kicking, whole-body deceleration during the final stride has been associated with greater kick leg angular momentum and enhanced foot and ball velocities, but the influence of approach velocity on these mechanisms is unknown. This study assessed how approach velocity affects momentum conversion strategies of experienced players performing fast and accurate kicks. Eleven semi-professional footballers performed instep kicks from self-selected (3.34 ± 0.43 m/s), fast (3.71 ± 0.33 m/s) and slow (2.77 ± 0.32 m/s) approaches. Kicking motions and ground reaction forces under the support leg were captured using 3D motion analysis (1000 Hz). The players responded to perturbations in approach velocity by using the support leg to regulate whole-body deceleration and create ideal conditions for co-ordinated pelvic and kick leg momentums during the downswing. Further, the pelvis was key for generating transverse momentum at the kick leg, but the participants displayed distinctly different pelvis transverse rotation strategies. Identification of these inter-individual strategies may provide a basis for technical and strength training practices to be tailored for individual players. Future research might investigate if training practices that expose footballers to varying approach velocities of between 2.5 and 4.0 m/s promotes development of movement strategies that are robust to perturbations in approach conditions.

Choice of low-pass filter influences practical interpretation of ball kicking motions: the effect of a time-frequency filter method

When studying ball kicking, conventional low-pass filters may distort kick leg kinematics near the time of foot-to-ball contact, leading to flawed practical interpretation of the skill. Time-frequency filters are a viable alternative but are not widely used. This study compared a fractional Fourier filter (FrFF) with conventional filters (CF) methods for estimating common parameters used to define kicking performance. Instep kicks from 23 experienced soccer players were captured by 3D motion analysis (1000 Hz), and kick leg foot velocities, knee angular velocities and ankle dorsi-plantarflexion angles compared between the FrFF and variations of a Butterworth CF. The FrFF and CFs using a higher cut-off frequency (>70 Hz) successfully detected lower leg motion prior to, during and following impact, whereas CFs with low cut-off frequencies (<20 Hz) attenuated motion near impact. Truncating data at impact provided valid pre-impact kinematics, but ignored information thereafter. Rather than decelerating the lower leg to conserve accuracy, 'kicking through the ball' should be considered a valid coaching cue. Further, controlling ankle plantar flexion to ensure efficient impact mechanics may be important for skilled kicking. Practitioners should consider how choice of filter will affect their data, and use of time-frequency methods can help inform empirically grounded coaching practices.

An Instrumented Mouthguard for Real-Time Measurement of Head Kinematics under a Large Range of Sport Specific Accelerations

BACKGROUND

Head impacts in sports can produce brain injuries. The accurate quantification of head kinematics through instrumented mouthguards (iMG) can help identify underlying brain motion during injurious impacts. The aim of the current study is to assess the validity of an iMG across a large range of linear and rotational accelerations to allow for on-field head impact monitoring.

METHODS

Drop tests of an instrumented helmeted anthropometric testing device (ATD) were performed across a range of impact magnitudes and locations, with iMG measures collected concurrently. ATD and iMG kinematics were also fed forward to high-fidelity brain models to predict maximal principal strain.

RESULTS

The impacts produced a wide range of head kinematics (16-171 g, 1330-10,164 rad/s2 and 11.3-41.5 rad/s) and durations (6-18 ms), representing impacts in rugby and boxing. Comparison of the peak values across ATD and iMG indicated high levels of agreement, with a total concordance correlation coefficient of 0.97 for peak impact kinematics and 0.97 for predicted brain strain. We also found good agreement between iMG and ATD measured time-series kinematic data, with the highest normalized root mean squared error for rotational velocity (5.47 ± 2.61%) and the lowest for rotational acceleration (1.24 ± 0.86%). Our results confirm that the iMG can reliably measure laboratory-based head kinematics under a large range of accelerations and is suitable for future on-field validity assessments.

Multiplanar lumbar, pelvis and kick leg sequencing during soccer instep kicking from different approach angles

Multiplanar kinematic and kinetic sequencing from different approach angles can highlight how soccer players perform fast and accurate kicks. This study therefore aimed to a) determine multiplanar torso, pelvis and kick leg sequencing during instep kicks and b) highlight the effect of different approach angles on these sequencing patterns. Twenty male soccer players (mass 77.9 ± 6.5 kg, height 1.71 ± 0.09 m, age 23.2 ± 3.7 years) performed kicks from self-selected (∼30-45°), straight (0°) and wide (67.5°) approaches and multiplanar lumbo-pelvic, hip and knee angular velocities, moments and powers were derived from 3D motion analysis. The results suggest tension arc release between the upper and lower body functions as a two-stage mechanism. The first phase of arc release was characterised by increases in concentric hip flexion and transverse lumbo-pelvic velocities towards the ball. The second phase was characterised by increasing concentric lumbo-pelvic flexion and knee extension work to angularly accelerate the kicking knee towards foot-to-ball contact. Further, alterations in kinematic and kinetic sequencing helped maintain performance (ball and foot velocities at ball contact) and accuracy at approach angles other than self-selected. These findings can help coaches and practitioners design effective training practices.

Understanding the effects of ball orientation in Rugby Union place kicking: the preferences of international kickers and the kinematics of the foot-ball impact

Rugby Union place kicking is influential to match outcome. Previous research has analysed kicker motion prior to ball contact in detail, but ball orientation and the impact phase are typically ignored. This study aims to firstly identify the ball orientations used by international place kickers, and secondly to experimentally analyse the foot-ball interaction in trained kickers using different ball orientations. Overall, 25.5% of the international kickers used an upright ball orientation, 27.5% used a diagonal orientation and 47.1% used a horizontal orientation. However, ball orientation preference was not significant in predicting kick outcome in a binomial logistic regression model. To address the second aim, ball orientation was experimentally manipulated and lower limb and ball kinematics were captured using high-speed (4000 Hz) video. Whilst the impact location on the ball differed significantly between most ball orientation conditions, the impact location relative to the global vertical was largely consistent across all conditions. This was likely due to kickers adopting very consistent lower limb kinematics, although the shank and ankle angles at impact were affected by ball orientation conditions for some kickers. Impact durations also differed between some conditions, although this did not appear to affect the impact efficiency.

Evaluation of a time-varying cut-off frequency low-pass filter for assessing knee joint moments and ACL injury risk

Conventional low-pass filtering of 3D motion capture signals prior to estimating knee joint moments and ACL injury risk has known limitations. This study aimed to evaluate the fractional Fourier filter (FrFF), which employs a time-varying cut-off frequency, for assessing peak knee moments during common ACL injury risk screening tasks. Ground reaction force and motion data were collected from 23 team sport athletes performing 45° unanticipated sidesteps and drop jumps. Peak knee abduction, internal rotation and non-sagittal moments were estimated using inverse dynamics after five different low-pass filter approaches were applied (FrFF vs. four variations of a fourth-order Butterworth filter). The FrFF produced peak knee moments larger than "matched" (i.e. force and motion cut-off frequencies were equivalent) and closer to "unmatched" (i.e. force and motion cut-offs were different) Butterworth filter approaches and removed problems with representing foot-to-ground impact peaks. Participants with larger peak moments were identified as "at risk" of injury irrespective of filter approach, but the FrFF identified "at risk" classifications conventional approaches did not. Preliminary evidence suggests that the FrFF displays enhanced sensitivity to movement strategies that induce high knee loads. This was most evident for sidestepping, with more research warranted to optimise the FrFF for drop jumps.

Defining movement strategies in soccer instep kicking using the relationship between pelvis and kick leg rotations

Growing evidence suggests skilled ball kickers use distinct pelvis and kick leg strategies to achieve successful performance. However, since the interaction between different strategies remains unexplored, the aims of this study were to a) examine relationships between pelvis and kick leg rotations in male players performing soccer instep kicks and b) classify different 'types' of kickers based on the observed movement strategies. Twenty semi-professional players performed kicks for maximal speed and accuracy, and kick leg and pelvis kinematics were analysed using 3D motion capture (1000 Hz). A strong relationship was found between change in pelvis transverse angular velocity and thigh-knee angular velocity ratio upon ball contact (r = 0.76, p < 0.001), and participants were categorised by their location on kick leg (thigh-knee) and pelvis (maintainer-reverser) continuums. Knowledge of a player's preferred strategy can inform departure from 'one size fits all' technical and conditioning training practices towards more individualised approaches. For example, pelvis maintainer-thigh dominant kickers might benefit from focus towards the concentric capabilities of the hip flexors, whereas reverser-knee dominant kickers might benefit from developing the ability to decelerate the pelvis and thigh to induce motion-dependent angular acceleration of the lower leg towards the ball.