Ag Surface and Bulk Segregations in Sputtered ZrCuAlNi Metallic Glass Thin Films

We report on the formation of Ag-containing ZrCuAlNi thin film metallic glass (nano)composites by a hybrid direct-current magnetron sputtering and high-power pulsed magnetron sputtering process. The effects of Ag content, substrate temperature and substrate bias potential on the phase formation and morphology of the nanocomposites were investigated. While applying a substrate bias potential did not strongly affect the morphological evolution of the films, the Ag content dictated the size and distribution of Ag surface segregations. The films deposited at low temperatures were characterized by strong surface segregations, formed by coalescence and Ostwald ripening, while the volume of the films remained featureless. At higher deposition temperature, elongated Ag segregations were observed in the bulk and a continuous Ag layer was formed at the surface as a result of thermally enhanced surface diffusion. While microstructural observations have allowed identifying both surface and bulk segregations, an indirect method for detecting the presence of Ag segregations is proposed, by measuring the electrical resistivity of the films.

A Proposal for a Composite with Temperature-Independent Thermophysical Properties: HfV2-HfV2O7

The HfV2-HfV2O7 composite is proposed as a material with potentially temperature-independent thermophysical properties due to the combination of anomalously increasing thermoelastic constants of HfV2 with the negative thermal expansion of HfV2O7. Based on literature data, the coexistence of both a near-zero temperature coefficient of elasticity and a coefficient of thermal expansion is suggested for a composite with a phase fraction of approximately 30 vol.% HfV2 and 70 vol.% HfV2O7. To produce HfV2-HfV2O7 composites, two synthesis pathways were investigated: (1) annealing of sputtered HfV2 films in air to form HfV2O7 oxide on the surface and (2) sputtering of HfV2O7/HfV2 bilayers. The high oxygen mobility in HfV2 is suggested to inhibit the formation of crystalline HfV2-HfV2O7 composites by annealing HfV2 in air due to oxygen-incorporation-induced amorphization of HfV2. Reducing the formation temperature of crystalline HfV2O7 from 550 °C, as obtained upon annealing, to 300 °C using reactive sputtering enables the synthesis of crystalline bilayered HfV2-HfV2O7.

Single-Molecule Desorption Studies of Poly(acrylic acid) at Electrolyte/Oxide/TiAlN Interfaces

The presented studies correlate the surface chemistry of electrochemically oxidized TiAlN hard coatings with the desorption forces of poly(acrylic acid) (PAA) at the electrolyte/oxide/TiAlN interface. Atomic force microscopy (AFM)-based single-molecule force spectroscopy (SMFS) was performed at different pH values to investigate surface chemistry-induced changes in desorption force. The chemical state was characterized by X-ray photoemission spectroscopy and electrochemical analysis. The results show that the desorption forces continuously decrease with increasing pH in the range from pH 5 to 9. The comparison of the desorption forces on rf-sputtered titanium dioxide and aluminum oxide films shows that the electrochemically oxidized surface of TiAlN, in agreement with the revealed surface composition, shows interfacial adhesive properties in contact with PAA and water that resemble a pure titanium oxide layer. Load rate-dependent measurements were performed to analyze both the free energy barrier and the transition state distance.

Synthesis of Intermetallic (Mg1-x,Alx)2Ca by Combinatorial Sputtering

The synthesis–composition–structure relationship in the Mg–Ca–Al system is studied using combinatorial magnetron sputtering. With increasing deposition temperature, a drastic decrease in Mg concentration is obtained. This behavior can be understood based on density functional theory calculations yielding a desorption energy of 1.9 eV/atom for Mg from a hexagonal Mg nanocluster which is far below the desorption energy of Mg from a Mg₂Ca nanocluster (3.4 eV/atom) implying desorption of excess Mg during thin film growth at elevated temperatures. Correlative structural and chemical analysis of binary Mg–Ca thin films suggests the formation of hexagonal Mg₂Ca (C14 Laves phase) in a wide Mg/Ca range from 1.7 to 2.2, expanding the to date reported stoichiometry range. Pronounced thermally-induced desorption of Mg is utilized to synthesize stoichiometric (Mg_1−x,Al_x)₂Ca thin films by additional co-sputtering of elemental Al, exhibiting a higher desorption energy (6.7 eV/atom) compared to Mg (3.4 eV/atom) from Mg₂Ca, which governs its preferred incorporation during synthesis. X-ray diffraction investigations along the chemical gradient suggest the formation of intermetallic C14 (Mg_1–x,Al_x)₂Ca with a critical aluminum concentration of up to 23 at.%. The introduced synthesis strategy, based on the thermally-induced desorption of weakly bonded species, and the preferential incorporation of strongly bonded species, may also be useful for solubility studies of other phases within this ternary system as well as for other intermetallics with weakly bonded alloying constituents.