Foam-lined hohlraum, inertial confinement fusion experiments on the National Ignition Facility

Experiments on the National Ignition Facility (NIF) to study hohlraums lined with a 20-mg/cc 400-μm-thick Ta_{2}O_{5} aerogel at full scale (hohlraum diameter = 6.72 mm) are reported. Driven with a 1.6-MJ, 450-TW laser pulse, the performance of the foam liner is diagnosed using implosion hot-spot symmetry measurements of the high-density carbon (HDC) capsule and measurement of inner beam propagation through a thin-wall 8-μm Au window in the hohlraum. Results show an improved capsule performance due to laser energy deposition further inside the hohlraum, leading to a modest increase in x-ray drive and reduced preheat due to changes in the x-ray spectrum when the foam liner is included. In addition, the outer cone bubble uniformity is improved, but the predicted improvement in inner beam propagation to improve symmetry control is not realized for this foam thickness and density.

Correction: Optimizing supercapacitor electrode density: achieving the energy of organic electrolytes with the power of aqueous electrolytes

Correction for ‘Optimizing supercapacitor electrode density: achieving the energy of organic electrolytes with the power of aqueous electrolytes’ by M. D. Merrill et al., RSC Adv., 2014, 4, 42942–42946.

A multi-wavelength, high-contrast contact radiography system for the study of low-density aerogel foams

A multi-wavelength, high contrast contact radiography system has been developed to characterize density variations in ultra-low density aerogel foams. These foams are used to generate a ramped pressure drive in materials strength experiments at the National Ignition Facility and require precision characterization in order to reduce errors in measurements. The system was used to characterize density variations in carbon and silicon based aerogels to ∼10.3% accuracy with ∼30 μm spatial resolution. The system description, performance, and measurement results collected using a 17.8 mg/cc carbon based JX-6 (C20H30) aerogel are discussed in this manuscript.

Optimizing supercapacitor electrode density: achieving the energy of organic electrolytes with the power of aqueous electrolytes

High-density electrodes allow aqueous-based supercapacitors to attain energy densities comparable to those of commercially-available organic-based supercapacitors with 10–100× greater power.

Mechanisms of atomic layer deposition on substrates with ultrahigh aspect ratios

Atomic layer deposition (ALD) appears to be uniquely suited for coating substrates with ultrahigh aspect ratios (> or similar 10(3)), including nanoporous solids. Here, we study the ALD of Cu and Cu3N on the inner surfaces of low-density nanoporous silica aerogel monoliths. Results show that Cu depth profiles in nanoporous monoliths are limited not only by Knudsen diffusion of heavier precursor molecules into the pores, as currently believed, but also by other processes such as the interaction of precursor and reaction product molecules with pore walls. Similar behavior has also been observed for Fe, Ru, and Pt ALD on aerogels. On the basis of these results, we discuss design rules for ALD precursors specifically geared for coating nanoporous solids.