Limited impacts of truck-based ultra-low-volume applications of mosquito adulticides on mortality in honey bees (Apis mellifera)

Adulticides applied against mosquitoes can reduce vector populations during times of high arbovirus transmission. However, impacts of these insecticides on pollinators and other non-target organisms are of concern to mosquito control professionals, beekeepers and others. We evaluated mortality of Culex quinquefasciatus and Apis mellifera when caged insects were exposed to low and high label rates of four common adulticides (Aqua-Pursuit™ [permethrin], Duet® [prallethrin + sumithrin], Fyfanon® [malathion] and Scourge® [resmethrin]) at six distances up to 91.4 m from a truck-mounted ultra-low-volume sprayer. Honey bee mortality was both absolutely low (61 m had limited impacts on honey bee mortality while providing effective mosquito control.

Samplers for evaluation and quantification of ultra-low volume space sprays

A field study was conducted to explore the suitability of 5 pesticide deposition samplers for airborne spray and ground deposits from ultra-low-volume (ULV) space sprays. Samplers included horizontally stretched stationary cotton ribbons at 2 heights, rotating ribbon, rotating Teflon slides, and filter paper. Slides were also used for droplet-size analysis. A set of 7 samplers of each type was placed at 1, 7, 15, 25, 40, 65, and 90 m from the spray line along the spray swath. Water and BVA13 oil with fluorescent dyes as tracers were sprayed with the use of a truck-mounted ULV sprayer at dusk and dawn. Results suggest that the horizontal and rotating cotton ribbons are best for quantification of airborne spray and filter paper is best for ground deposition collection. The rotating slide samplers only detected the BVA13 oil-based sprays.

Canopy penetration and deposition of barrier sprays from electrostatic and conventional sprayers

An experimental study was conducted to investigate the usefulness of electrostatic and conventional sprayers for barrier applications. Two conventional and three electrostatic sprayers were used in the study. Usefulness of the sprayers was rated based on penetration of spray into and deposition onto 2 sides of leaves on natural vegetation. Bifenthrin (Talstar adulticide) was applied at labeled rate, fluorescent dye was added to the tank mix as tracer, and all sprayers applied the dye and insecticide at the same rate. The results indicated that sprayers producing larger droplets produced significantly higher deposition on vegetation in barrier applications than the sprayers producing smaller droplets. Sprayers with higher air velocity at the nozzle discharge proved significantly better for barrier sprays than the sprayers with lower air velocity. Electrostatic sprayers did not show any improvement in deposition on vegetation or in penetration into vegetation over the conventional sprayers. There was no difference in deposition between truck-mounted and backpack sprayers.

Spray characterization of thermal fogging equipment typically used in vector control

Droplet size spectra from different sprayers used to generate insecticide-laden fogs for controlling flying insects were measured by a laser diffraction instrument and Teflon-coated slides. The objectives of this work were to present not only information on spray-system droplet size generated by different sprayers, but to compare methodologies by which other similar systems can be evaluated and give applicators sprayer-system performance data. Data from 45 replicated spray tests, comprising 11 sprayers and 5 pesticides, showed a wide range in the droplet size spectra produced. The volume median diameter measurements ranged from 2.6 to 75.5 microm for diesel-diluted sprays and from 27.9 to 59.9 microm for water-diluted sprays. Similarly, the percent volume <20 microm ranged between 12.0-100% and 8.5-30.7%, for diesel- and water-diluted sprays, respectively. The droplet sizes measured by the swinging slide and laser diffraction methods were not consistent. The information presented aids users in sprayer selection and operation to produce the specific droplet size spectra required for a particular application.

Characterization of truck-mounted atomization equipment typically used in vector control

The control of medically important arthropod vectors of human and animal disease is a high priority for both public health and military officials. Because droplet size of pesticide spray material is a critical factor affecting vector control applications, the droplet-size spectra produced by 11 sprayers and 3 spray formulations were evaluated. Droplet-size spectra were measured by a laser diffraction instrument, a hot-wire system, and rotating slides. There were considerable differences in the droplet-size spectra produced by the different sprayers tested. The volume median diameter (Dv0.5) for the water-based sprays ranged from 4.7 to 211 microm, depending on the sprayer, and the percent of spray volume contained in droplets less than 20 microm (%vol <20 microm) ranged between 0.5% and 98.9%. The Dv0.5 measurements for the oil-based sprays ranged from 9.4 to 125.3 microm and the %vol <20 microm ranged between 2.4% and 97.9%. The correlations between the Dv0.5 measured by the laser system (Dv0.5-laser) and the mass median diameter, Sauter diameter, and Dv0.5 measured by the AIMS probe were all significant. Generally, the slide Dv0.5s were numerically similar to the Dv0.5 from the laser system and the Sauter diameter from the Army Insecticide Measuring System probe. There was less consistent agreement between the % <32 microm values obtained from the slides and those from the other 2 samplers. The information presented can be used by applicators to select the sprayer that produces the droplet-size spectra needed for their particular application situation.

High-contrast plasma-electrode Pockels cell

A plasma-electrode Pockels cell (PEPC) has been developed for use on the OMEGA extended performance (EP) laser system that can be used in a high-contrast optical switch, as required for isolation of the system from retroreflected pulses. Contrast ratios reliably exceeded 500:1 locally everywhere in the clear aperture. The key to achieving this improvement was the use of circular windows simply supported on compliant O rings, which is shown to produce very low stress-induced birefringence despite vacuum loading. Reliable operation was achieved operating at a relatively high operating pressure, low operating pressures being found to be strongly correlated to occurrences of local loss of plasma density.

Field evaluation of arthropod repellents, deet and a piperidine compound, AI3-37220, against Anopheles funestus and Anopheles arabiensis in western Kenya

A field evaluation of the repellents N,N-diethyl-3-methylbenzamide (deet) and 1-(3-cyclohexen-1-yl-carbonyl)-2-methylpiperidine (AI3-37220, a piperidine compound) was conducted against Anopheles funestus and An. arabiensis in Kenya. Both repellents provided significantly more protection (P < 0.001) than the ethanol control. AI3-37220 was significantly more effective (P < 0.001) than deet in repelling both species of mosquitoes. After 9 h, 0.1 mg/cm2 of AI3-37220 provided 89.8% and 71.1% protection against An. arabiensis and An. funestus, respectively. Deet provided > 80% protection for only 3 h, and protection rapidly decreased after this time to 60.2% and 35.1% for An. arabiensis and An. funestus, respectively, after 9 h. Anopheles funestus was significantly less sensitive (P < 0.001) to both repellents than An. arabiensis. The results of this study indicate that AI3-37220 is more effective than deet in repelling anopheline mosquitoes in western Kenya.

Response of wild Anopheles funestus to repellent-protected volunteers is unaffected by malaria infection of the vector

A field experiment was conducted to compare the biting behavior of Plasmodium falciparum-infected and uninfected Anopheles on humans using mosquito repellents. Repellent formulations (5% [wt/vol] N,N-diethyl-3-methylbenzamide [deet] or 5% [wt/vol] AI3-37220, a piperidine compound, both in 100% ethanol, or 100% ethanol alone [as a control]) were applied to the lower legs of 3 collectors in each of 4 houses. Collectors caught mosquitoes over 6 collection nights. Mosquitoes were collected into vials after they initiated probing on the leg of a collector. Infected females made up the same proportion of the Anopheles funestus populations biting either repellent-protected or unprotected individuals. We conclude that repellent formulations are equally effective against Plasmodium-infected and uninfected An. funestus.

Susceptibility of Psorophora columbiae Larvae over Time to Parasitism by Romanomermis culicivorax

The ability of Romanomermis culicivorax preparasites to penetrate and infect Psorophora columbiae decreased substantially after ca. 28 hours. Parasitism at temperatures typical of Louisiana rice fields (i.e., 26, 29, and 32 +/- 0.5 C) showed a significant linear decrease (P < 0.01) as the percentage of older larval instars increased at the times of exposure. These data emphasize the need for a synchronous field application of preparasites to challenge the rapid development of early instars of Ps. columbiae. Applications of postparasites rather than insecticide treatments to potential mosquito breeding habitats may offer greater flexibility in larval mosquito control programs.

The influence of standards on health care delivery

The standardization of medical products and devices is a topic which has recently spawned a large number of articles in various journals. Certain of these are highly informative, and others are not. Accordingly, it is time for the Canadian Standards Association (CSA) to place greater emphasis on the second of its responsibilities and to begin to provide the public with more basic information concerning standardization in the field of health care technology. In order to achieve this, CSA has prepared a series of articles which outline the goals and the major requirements of standards for various types of devices or installations. This is the first in that series, and is intended to provide information on what standards are and how they are intended to influence the health care delivery system.

Kinetic cooling observation with a cw CO(2) laser

An experiment permitting direct observation of kinetic cooling of a slewed 6-kW cw 10.6-microm CO(2) laser beam is described. The experimental results obtained are compared with a theoretical code, and good agreement is noted.

The After-Effects of Wounds of the Chest and their Treatment

Images

A RARE SARCOMA

Images