Chitosan effects on monolayers of zwitterionic, anionic and a natural lipid extract from E. coli at physiological pH

Langmuir monolayers are used to simulate the biological membrane environment, acting as a mimetic system of the outer or the inner membrane leaflet. Herein, we analyze the interaction of membrane models with a partially N-acetylated chitosan (Ch35%) possessing a quasi-ideal random pattern of acetylation, full water solubility up to pH ≈ 8.5 and unusually high weight average molecular weight. Lipid monolayers containing dipalmitoyl phosphatidyl choline (DPPC), dipalmitoyl phosphatidyl ethalonamine (DPPE), dipalmitoyl phosphatidyl glycerol (DPPG) or E. coli total lipid extract were spread onto subphases buffered at pH 4.5 or 7.4. The incorporation of Ch35% chitosan caused monolayer expansion and a general trend of decreasing monolayer rigidity with Ch35% concentration. Due to its relatively high content of N-acetylglucosamine (GlcNAc) units, Ch35% interactions with negatively charged monolayers and with E. coli extract were weaker than those involving zwitterionic monolayers or lipid rafts. While the smaller interaction with negatively charged lipids was unexpected, this finding can be attributed to the degree of acetylation (35%) which imparts a small number of charged groups for Ch35% to interact. Chitosan properties are therefore determinant for interactions with model cell membranes, which explains the variability in chitosan bactericide activity in the literature. This is the first study on the effects from chitosans on realistic models of bacterial membranes under physiological pH.

On the role of surrounding regions in the fusion peptide in dengue virus infection

Dengue virus infection depends on its fusion with the host membrane, where the binding occurs through interaction between proteins on the virus cell surface and specific viral receptors on target membranes. This process is mediated by the fusion peptide located between residues 98 and 112 (DRGWGNGCGLFGKGG) that forms a loop in domain II of dengue E glycoprotein. In this study, we evaluated the role of fusion peptide surrounding regions (88-97 and 113-123) of the Dengue 2 subtype on its interaction with the membrane and fusion activity. These sequences are important to stabilize the fusion peptide loop and increase fusion activity. Three peptides, besides the fusion peptide, were synthesized by SPPS using the Fmoc chemical approach. The first contains the fusion peptide and the C-terminal region of the loop (sequence 98-123); another contains the N-terminal region (88-112) and the larger peptide contains both regions (88-123). The peptides were able to interact with a model membrane. Differences in morphology of the monolayer promoted by the peptides were assessed by Brewster Angle Microscopy (BAM). Our data indicated that the C-terminal region of fusion peptide loop is more efficient in promoting fusion and interacting with the membrane than the N-terminal sequence, which is responsible for the electrostatic initial interaction. We propose a 2-step mechanism for the interaction of the dengue virus fusion peptide with the host membrane, where the N-terminal sequence docks electrostatically on the headgroups and then the C-terminal interacts via hydrophobic forces in the acyl chains.

Salmonella Membrane Structural Remodeling Increases Resistance to Antimicrobial Peptide LL-37

Gram-negative bacteria are protected from their environment by an outer membrane that is primarily composed of lipopolysaccharides (LPSs). Under stress, pathogenic serotypes of Salmonella enterica remodel their LPSs through the PhoPQ two-component regulatory system that increases resistance to both conventional antibiotics and antimicrobial peptides (AMPs). Acquired resistance to AMPs is contrary to the established narrative that AMPs circumvent bacterial resistance by targeting the general chemical properties of membrane lipids. However, the specific mechanisms underlying AMP resistance remain elusive. Here we report a 2-fold increase in bacteriostatic concentrations of human AMP LL-37 for S. enterica with modified LPSs. LPSs with and without chemical modifications were isolated and investigated by Langmuir films coupled with grazing-incidence X-ray diffraction (GIXD) and specular X-ray reflectivity (XR). The initial interactions between LL-37 and LPS bilayers were probed using all-atom molecular dynamics simulations. These simulations suggest that initial association is nonspecific to the type of LPS and governed by hydrogen bonding to the LPS outer carbohydrates. GIXD experiments indicate that the interactions of the peptide with monolayers reduce the number of crystalline domains but greatly increase the typical domain size in both LPS isoforms. Electron densities derived from XR experiments corroborate the bacteriostatic values found in vitro and indicate that peptide intercalation is reduced by LPS modification. We hypothesize that defects at the liquid-ordered boundary facilitate LL-37 intercalation into the outer membrane, whereas PhoPQ-mediated LPS modification protects against this process by having innately increased crystallinity. Since induced ordering has been observed with other AMPs and drugs, LPS modification may represent a general mechanism by which Gram-negative bacteria protect against host innate immunity.

The cyclic peptide labaditin does not alter the outer membrane integrity of Salmonella enterica serovar Typhimurium

Antimicrobial peptides are a promising class of new antibiotics with the ability to kill bacteria by disrupting their cell membrane, which is especially difficult for Gram-negative bacteria whose cell wall contains an outer layer of lipopolysaccharides (LPS). Here we show that the cyclic decapeptide Labaditin (Lo), with proven activity against the Gram-positive Staphylococcus aureus and Streptococcus mutans, is not able to kill the Gram-negative Salmonella enterica serovar Typhimurium (S.e.s. Typhimurium). We found that Lo induced significant changes in the surface pressure isotherms of Langmuir monolayers representing the Salmonella enterica serovar Typhimurium inner membrane (S.e.s. Typhimurium IM), and caused leakage in large unilamellar vesicles made with this IM lipid composition. On the basis of these results one should expect bactericidal activity against S.e.s. Typhimurium. However, Lo could not interact with a monolayer of LPS, causing no significant changes in either the surface pressure isotherms or in the polarization-modulated infrared reflection absorption spectra (PM-IRRAS). Therefore, the failure of Lo to kill S.e.s. Typhimurium is associated with the lack of interaction with LPS from the outer bacteria membrane. Our approach with distinct monolayer compositions and combined techniques to investigate molecular-level interactions is useful for drug design to fight antibiotic-resistant bacteria.

Challenges in Application of Langmuir Monolayer Studies To Determine the Mechanisms of Bactericidal Activity of Ruthenium Complexes

The effects induced by antibiotics on the bacterial membrane may be correlated with their bactericidal activity, and such molecular-level interactions can be probed with Langmuir monolayers representing the cell membrane. In this study, we investigated the interaction between [Ru(mcbtz)₂(PPh₃)₂] (RuBTZ, mcbtz = 2-mercaptobenzothiazoline) and [Ru(mctz)₂(PPh₃)₂] (RuCTZ, mctz = 2-mercaptothiazoline) with Langmuir monolayers of a lipid extract of Escherichia coli, an extract of lipopolysaccharides (LPSs), and a zwitterionic phospholipid, dioleoylphosphatidyl choline (DOPC). RuBTZ and RuCTZ had little effects on DOPC, which is consistent with their negligible toxicity toward mammalian cells that may be approximated by a zwitterionic monolayer. Also little were their effects on LPSs. In contrast, RuBTZ and RuCTZ induced expansion in the surface pressure isotherms and decreased the compressional modulus of the E. coli lipid extract. While the more hydrophobic RuBTZ seemed to affect the hydrophobic tails of the E. coli extract monolayer to a larger extent, according to polarization modulation infrared reflection absorption spectroscopy results, evidence of a stronger RuBTZ interaction could not be confirmed unequivocally. Therefore, the interaction with the E. coli cell membrane cannot be directly correlated with the observed higher bactericidal activity of RuBTZ, in comparison to that of RuCTZ. This appears to be a case in which Langmuir monolayer studies do not suffice to determine the mechanisms responsible for the bactericidal activity.

Modification of Salmonella Lipopolysaccharides Prevents the Outer Membrane Penetration of Novobiocin

Small hydrophilic antibiotics traverse the outer membrane of Gram-negative bacteria through porin channels. Large lipophilic agents traverse the outer membrane through its bilayer, containing a majority of lipopolysaccharides in its outer leaflet. Genes controlled by the two-component regulatory system PhoPQ modify lipopolysaccharides. We isolate lipopolysaccharides from isogenic mutants of Salmonella sp., one lacking the modification, the other fully modified. These lipopolysaccharides were reconstituted as monolayers at the air-water interface, and their properties, as well as their interaction with a large lipophilic drug, novobiocin, was studied. X-ray reflectivity showed that the drug penetrated the monolayer of the unmodified lipopolysaccharides reaching the hydrophobic region, but was prevented from this penetration into the modified lipopolysaccharides. Results correlate with behavior of bacterial cells, which become resistant to antibiotics after PhoPQ-regulated modifications. Grazing incidence x-ray diffraction showed that novobiocin produced a striking increase in crystalline coherence length, and the size of the near-crystalline domains.

Molecular-Level Modifications Induced by Photo-Oxidation of Lipid Monolayers Interacting with Erythrosin

Incorporation into cell membranes is key for the action of photosensitizers in photomedicine treatments, with hydroperoxidation as the prominent pathway of lipid oxidation. In this paper, we use Langmuir monolayers of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) as cell membrane models to investigate adsorption of the photosensitizer erythrosin and its effect on photoinduced lipid oxidation. From surface pressure isotherms and polarization-modulated infrared reflection-absorption spectroscopy (PM-IRRAS) data, erythrosin was found to adsorb mainly via electrostatic interaction with the choline in the head groups of both DOPC and DPPC. It caused larger monolayer expansion in DOPC, with possible penetration into the hydrophobic unsaturated chains, while penetration into the DPPC saturated chains was insignificant. Easier penetration is due to the less packed DOPC monolayer, in comparison to the more compact DPPC according to the monolayer compressibility data. Most importantly, light irradiation at 530 nm made the erythrosin-containing DOPC monolayer become less unstable, with a relative surface area increase of ca. 19%, in agreement with previous findings for bioadhesive giant vesicles. The relative area increase is consistent with hydroperoxidation, supporting the erythrosin penetration into the lipid chains, which favors singlet oxygen generation close to double bonds, an important requirement for photodynamic efficiency.

Effect of carrageenans of different chemical structures in biointerfaces: a Langmuir film study

Carrageenans have unique properties in the pharmaceutical and food industries that involve interactions with lipid interfaces, which may be accessed if surface chemistry techniques are employed. The interaction between three different types of carrageenans with dipalmitoylphosphatidylcholine (DPPC) was investigated using Langmuir monolayers as biointerface models. With a combination of data on Surface Pressure-Area Isotherms and Polarization Modulation Infrared Reflection-Absorption Spectroscopy (PM-IRRAS), the effect of different fractions on DPPC monolayers was compared by considering the chemical and structural differences as well as the anticoagulant activity of each fraction. Thus, a model is proposed in which carrageenans can encompass interactions that are maximized due to geometrical adaptations on behalf of the interactions between polysaccharide sulfate groups and lipid polar heads.

Dermaseptin 01 as antimicrobial peptide with rich biotechnological potential: study of peptide interaction with membranes containing Leishmania amazonensis lipid-rich extract and membrane models

This article addresses the interactions of the synthetic antimicrobial peptide dermaseptin 01 (GLWSTIKQKGKEAAIAAA- KAAGQAALGAL-NH(2) , DS 01) with phospholipid (PL) monolayers comprising (i) a lipid-rich extract of Leishmania amazonensis (LRE-La), (ii) zwitterionic PL (dipalmitoylphosphatidylcholine, DPPC), and (iii) negatively charged PL (dipalmitoylphosphatidylglycerol, DPPG). The degree of interaction of DS 01 with the different biomembrane models was quantified from equilibrium and dynamic liquid-air interface parameters. At low peptide concentrations, interactions between DS 01 and zwitterionic PL, as well as with the LRE-La monolayers were very weak, whereas with negatively charged PLs the interactions were stronger. For peptide concentrations above 1 µg/ml, a considerable expansion of negatively charged monolayers occurred. In the case of DPPC, it was possible to return to the original lipid area in the condensed phase, suggesting that the peptide was expelled from the monolayer. However, in the case of DPPG, the average area per lipid molecule in the presence of DS 01 was higher than pure PLs even at high surface pressures, suggesting that at least part of DS 01 remained incorporated in the monolayer. For the LRE-La monolayers, DS 01 also remained in the monolayer. This is the first report on the antiparasitic activity of AMPs using Langmuir monolayers of a natural lipid extract from L. amazonensis.

Chitosan as a bioadhesive agent between porphyrins and phospholipids in a biomembrane model

Porphyrins are currently used in photodynamic therapy as photosensitizers. In this paper we studied the interaction of two charged porphyrins, 5, 10, 15, 20-mesotetrakis(N-metyl-4-pyridyl) porphyrin, (TMPyP/chloride salt) cationic, and 5, 10, 15, 20-meso-tetrakis(sulfonatophenyl) porphyrin, (TPPS4/sodium salt) anionic, nanoassembled in phospholipid Langmuir monolayers and Langmuir-Blodgett films. Furthermore, we used chitosan to mediate the interaction between the porphyrins and the model membrane, aiming to understand the role of the polysaccharide in a molecular level. The effect of the interaction of the photosensitizers on the fluidity of the lipid monolayer was investigated by using dilatational surface elasticity. We also used photoluminescence (PL) spectroscopy to identify the porphyrins adsorbed in the phospholipid films. We observed an expansion of the monolayer promoted by the adsorption of the porphyrins into the lipid-air interface which was more pronounced in the case of TMPyP, as a consequence of a strong electrostatic interaction with the anionic monolayer. The chitosan promoted a higher adsorption of the porphyrins on the phospholipid monolayers and enabled the porphyrin to stay in its monomeric form (as confirmed by PL spectroscopy), thus demonstrating that chitosan can be pointed out as a potential photosensitizer delivery system in photodynamic therapy.

Molecular view of the interaction between iota-carrageenan and a phospholipid film and its role in enzyme immobilization

Proteins incorporated into phospholipid Langmuir-Blodgett (LB) films are a good model system for biomembranes and enzyme immobilization studies. The specific fluidity of biomembranes, an important requisite for enzymatic activity, is naturally controlled by varying phospholipid compositions. In a model system, instead, LB film fluidity may be varied by covering the top layer with different substances able to interact simultaneously with the phospholipid and the protein to be immobilized. In this study, we immobilized a carbohydrate rich Neurospora crassa alkaline phosphatase (NCAP) in monolayers of the sodium salt of dihexadecylphosphoric acid (DHP), a synthetic phospholipid that provides very condensed Langmuir films. The binding of NCAP to DHP Langmuir-Blodgett (LB) films was mediated by the anionic polysaccharide iota-carrageenan (iota-car). Combining results from surface isotherms and the quartz crystal microbalance technique, we concluded that the polysaccharide was essential to promote the interaction between DHP and NCAP and also to increase the fluidity of the film. An estimate of DHP:iota-car ratio within the film also revealed that the polysaccharide binds to DHP LB film in an extended conformation. Furthermore, the investigation of the polysaccharide conformation at molecular level, using sum-frequency vibrational spectroscopy (SFG), indicated a preferential conformation of the carrageenan molecules with the sulfate groups oriented toward the phospholipid monolayer, and both the hydroxyl and ether groups interacting preferentially with the protein. These results demonstrate how interfacial electric fields can reorient and induce conformational changes in macromolecules, which may significantly affect intermolecular interactions at interfaces. This detailed knowledge of the interaction mechanism between the enzyme and the LB film is relevant to design strategies for enzyme immobilization when orientation and fluidity properties of the film provided by the matrix are important to improve enzymatic activity.

Calcium carbonate particle growth depending on coupling among adjacent layers in hybrid LB/LbL films

There are practical and academic situations that justify the study of calcium carbonate crystallization and especially of systems that are associated with organic matrices and a confined medium. Despite the fact that many different matrices have been studied, the use of well-behaved, thin organic films may provide new knowledge about this system. In this work, we have studied the growth of calcium carbonate particles on well-defined organic matrices that were formed by layer-by-layer (LbL) polyelectrolyte films deposited on phospholipid Langmuir-Blodgett films (LB). We were able to change the surface electrical charge density of the LB films by changing the proportions of a negatively charged lipid, the sodium salt of dimyristoyl-sn-glycero-phosphatidyl acid (DMPA), and a zwitterionic lipid, dimyristoyl-sn-glycero-phosphatidylethanolamine (DMPE). This affects the subsequent polyelectrolyte LbL film deposition, which also changes the the nature of the bonding (electrostatic interaction or hydrogen bonding). This approach allowed for the formation of calcium carbonate particles of different final shapes, roughnesses, and sizes. The masses of deposited lipids, polyelectrolytes, and calcium cabonate were quantified by the quartz crystal microbalance technique. The structures of obtained particles were analyzed by scanning electron microscopy.

Probing chitosan and phospholipid interactions using Langmuir and Langmuir-Blodgett films as cell membrane models

The interaction between chitosan and Langmuir and Langmuir-Blodgett (LB) films of dimyristoyl phosphatidic acid (DMPA) is investigated, with the films serving as simplified cell membrane models. At the air-water interface, chitosan modulates the structural properties of DMPA monolayers, causing expansion and decreasing the monolayer elasticity. As the surface pressure increased, some chitosan molecules remained at the interface, but others were expelled. Chitosan could be transferred onto solid supports alongside DMPA using the LB technique, as confirmed by infrared spectroscopy and quartz crystal microbalance measurements. The analysis of sum-frequency vibration spectroscopy data for the LB films combined with surface potential measurements for the monolayers pointed to chitosan inducing the ordering of the DMPA alkyl chains. Furthermore, the morphology of DMPA LB films, studied with atomic force microscopy, was affected significantly by the incorporation of chitosan, with the mixed chitosan-DMPA films displaying considerably higher thickness and roughness, in addition to chitosan aggregates. Because chitosan affected DMPA films even at pressures characteristic of cell membranes, we believe this study may help elucidate the role of chitosan in biological systems.

Interaction of Chitosan with Cell Membrane Models at the Air−Water Interface

In this paper we employed phospholipid Langmuir monolayers as membrane models to probe interactions with chitosan. Using a combination of surface pressure--area and surface potential--area isotherms and rheological measurements with the pendent drop technique, we observed that chitosan interacts with phospholipid molecules at the air-water interface. We propose a model in which chitosan interacts with the phospholipids mainly through electrostatic interactions, but also including H-bonding and hydrophobic forces, depending on the phospholipid packing density. At large areas per molecule, chitosan in the subphase adsorbs onto the monolayer, expanding it. At small areas per molecule, chitosan is located in the subsurface. Indeed, a mixed chitosan-phospholipid monolayer can be transferred onto solid supports, even at high surface pressures. The effects of chitosan on the viscoelastic properties of phospholipid monolayers may be taken as evidence for the ability of chitosan to disrupt cell membranes.

Fabrication of phytic acid sensor based on mixed phytase-lipid Langmuir-Blodgett films

This paper reports the surface activity of phytase at the air-water interface, its interaction with lipid monolayers, and the construction of a new phytic acid biosensor on the basis of the Langmuir-Blodgett (LB) technique. Phytase was inserted in the subphase solution of dipalmitoylphosphatidylglycerol (DPPG) Langmuir monolayers, and its incorporation to the air-water interface was monitored with surface pressure measurements. Phytase was able to incorporate into DPPG monolayers even at high surface pressures, ca. 30 mN/m, under controlled ionic strength, pH, and temperature. Mixed Langmuir monolayers of phytase and DPPG were characterized by surface pressure-area and surface potential-area isotherms, and the presence of the enzyme provided an expansion in the monolayers (when compared to the pure lipid at the interface). The enzyme incorporation also led to significant changes in the equilibrium surface compressibility (in-plane elasticity), especially in liquid-expanded and liquid-condensed regions. The dynamic surface elasticity for phytase-containing interfaces was investigated using harmonic oscillation and axisymmetric drop shape analysis. The insertion of the enzyme at DPPG monolayers caused an increase in the dynamic surface elasticity at 30 mN m(-)(1), indicating a strong interaction between the enzyme and lipid molecules at a high-surface packing. Langmuir-Blodgett (LB) films containing 35 layers of mixed phytase-DPPG were characterized by ultraviolet-visible and fluorescence spectroscopy and crystal quartz microbalance nanogravimetry. The ability in detecting phytic acid was studied with voltammetric measurements.