Oxygen Activation by Cu LPMOs in Recalcitrant Carbohydrate Polysaccharide Conversion to Monomer Sugars

Natural carbohydrate polymers such as starch, cellulose, and chitin provide renewable alternatives to fossil fuels as a source for fuels and materials. As such, there is considerable interest in their conversion for industrial purposes, which is evidenced by the established and emerging markets for products derived from these natural polymers. In many cases, this is achieved via industrial processes that use enzymes to break down carbohydrates to monomer sugars. One of the major challenges facing large-scale industrial applications utilizing natural carbohydrate polymers is rooted in the fact that naturally occurring forms of starch, cellulose, and chitin can have tightly packed organizations of polymer chains with low hydration levels, giving rise to crystalline structures that are highly recalcitrant to enzymatic degradation. The topic of this review is oxidative cleavage of carbohydrate polymers by lytic polysaccharide mono-oxygenases (LPMOs). LPMOs are copper-dependent enzymes (EC 1.14.99.53-56) that, with glycoside hydrolases, participate in the degradation of recalcitrant carbohydrate polymers. Their activity and structural underpinnings provide insights into biological mechanisms of polysaccharide degradation.

Nanosensor detection of an immunoregulatory tryptophan influx/kynurenine efflux cycle

Mammalian cells rely on cellular uptake of the essential amino acid tryptophan. Tryptophan sequestration by up-regulation of the key enzyme for tryptophan degradation, indoleamine 2,3-dioxygenase (IDO), e.g., in cancer and inflammation, is thought to suppress the immune response via T cell starvation. Additionally, the excreted tryptophan catabolites (kynurenines) induce apoptosis of lymphocytes. Whereas tryptophan transport systems have been identified, the molecular nature of kynurenine export remains unknown. To measure cytosolic tryptophan steady-state levels and flux in real time, we developed genetically encoded fluorescence resonance energy transfer nanosensors (FLIPW). The transport properties detected by FLIPW in KB cells, a human oral cancer cell line, and COS-7 cells implicate LAT1, a transporter that is present in proliferative tissues like cancer, in tryptophan uptake. Importantly, we found that this transport system mediates tryptophan/kynurenine exchange. The tryptophan influx/kynurenine efflux cycle couples tryptophan starvation to elevation of kynurenine serum levels, providing a two-pronged induction of apoptosis in neighboring cells. The strict coupling protects cells that overproduce IDO from kynurenine accumulation. Consequently, this mechanism may contribute to immunosuppression involved in autoimmunity and tumor immune escape.

Amylomaltase of Pyrobaculum aerophilum IM2 produces thermoreversible starch gels

Amylomaltases are 4-alpha-glucanotransferases (EC 2.4.1.25) of glycoside hydrolase family 77 that transfer alpha-1,4-linked glucans to another acceptor, which can be the 4-OH group of an alpha-1,4-linked glucan or glucose. The amylomaltase-encoding gene (PAE1209) from the hyperthermophilic archaeon Pyrobaculum aerophilum IM2 was cloned and expressed in Escherichia coli, and the gene product (PyAMase) was characterized. PyAMase displays optimal activity at pH 6.7 and 95 degrees C and is the most thermostable amylomaltase described to date. The thermostability of PyAMase was reduced in the presence of 2 mM dithiothreitol, which agreed with the identification of two possible cysteine disulfide bridges in a three-dimensional model of PyAMase. The kinetics for the disproportionation of malto-oligosaccharides, inhibition by acarbose, and binding mode of the substrates in the active site were determined. Acting on gelatinized food-grade potato starch, PyAMase produced a thermoreversible starch product with gelatin-like properties. This thermoreversible gel has potential applications in the food industry. This is the first report on an archaeal amylomaltase.

Improving low-temperature catalysis in the hyperthermostable Pyrococcus furiosus beta-glucosidase CelB by directed evolution

The beta-glucosidase from the hyperthermophilic archaeon Pyrococcus furiosus (CelB) is the most thermostable and thermoactive family 1 glycosylhydrolase described to date. To obtain more insight in the molecular determinants of adaptations to high temperatures and study the possibility of optimizing low-temperature activity of a hyperthermostable enzyme, we generated a library of random CelB mutants in Escherichia coli. This library was screened for increased activity on p-nitrophenyl-beta-D-glucopyranoside at room temperature. Multiple CelB variants were identified with up to 3-fold increased rates of hydrolysis of this aryl glucoside, and 10 of them were characterized in detail. Amino acid substitutions were identified in the active-site region, at subunit interfaces, at the enzyme surface, and buried in the interior of the monomers. Characterization of the mutants revealed that the increase in low-temperature activity was achieved in different ways, including altered substrate specificity and increased flexibility by an apparent overall destabilization of the enzyme. Kinetic characterization of the active-site mutants showed that in all cases the catalytic efficiency at 20 degrees C on p-nitrophenyl-beta-D-glucose, as well as on the disaccharide cellobiose, was increased up to 2-fold. In most cases, this was achieved at the expense of beta-galactosidase activity at 20 degrees C and total catalytic efficiency at 90 degrees C. Substrate specificity was found to be affected by many of the observed amino acid substitutions, of which only some are located in the vicinity of the active site. The largest effect on substrate specificity was observed with the CelB variant N415S that showed a 7.5-fold increase in the ratio of p-nitrophenyl-beta-D-glucopyranoside/p-nitrophenyl-beta-D-galactopyra noside hydrolysis. This asparagine at position 415 is predicted to interact with active-site residues that stabilize the hydroxyl group at the C4 position of the substrate, the conformation of which is equatorial in glucose-containing substrates and axial in galactose-containing substrates.

Improved oligosaccharide synthesis by protein engineering of beta-glucosidase CelB from hyperthermophilic Pyrococcus furiosus

Enzymatic transglycosylation of lactose into oligosaccharides was studied using wild-type beta-glucosidase (CelB) and active site mutants thereof (M424K, F426Y, M424K/F426Y) and wild-type beta-mannosidase (BmnA) of the hyperthermophilic Pyrococcus furiosus. The effects of the mutations on kinetics, enzyme activity, and substrate specificity were determined. The oligosaccharide synthesis was carried out in aqueous solution at 95 degrees C at different lactose concentrations and pH values. The results showed enhanced synthetic properties of the CelB mutant enzymes. An exchange of one phenylalanine to tyrosine (F426Y) increased the oligosaccharide yield (45%) compared with the wild-type CelB (40%). Incorporation of a positively charged group in the active site (M424K) increased the pH optimum of transglycosylation reaction of CelB. The double mutant, M424K/F426Y, showed much better transglycosylation properties at low (10-20%) lactose concentrations compared to the wild-type. At a lactose concentration of 10%, the oligosaccharide yield for the mutant was 40% compared to 18% for the wild-type. At optimal reaction conditions, a higher ratio of tetrasaccharides to trisaccharides was obtained with the double mutant (0.42, 10% lactose) compared to the wild-type (0.19, 70% lactose). At a lactose concentration as low as 10%, only trisaccharides were synthesized by CelB wild-type. The beta-mannosidase BmnA from P. furiosus showed both beta-glucosidase and beta-galactosidase activity and in the transglycosylation of lactose the maximal oligosaccharide yield of BmnA was 44%. The oligosaccharide yields obtained in this study are high compared to those reported with other transglycosylating beta-glycosidases in oligosaccharide synthesis from lactose.

Biochemical characterization and crystal structures of a fungal family 3 β-glucosidase, Cel3A from Hypocrea jecorina

Cellulase mixtures from Hypocrea jecorina are commonly used for the saccharification of cellulose in biotechnical applications. The most abundant β-glucosidase in the mesophilic fungus Hypocrea jecorina is HjCel3A, which hydrolyzes the β-linkage between two adjacent molecules in dimers and short oligomers of glucose. It has been shown that enhanced levels of HjCel3A in H. jecorina cellulase mixtures benefit the conversion of cellulose to glucose. Biochemical characterization of HjCel3A shows that the enzyme efficiently hydrolyzes (1,4)- as well as (1,2)-, (1,3)-, and (1,6)-β-D-linked disaccharides. For crystallization studies, HjCel3A was produced in both H. jecorina (HjCel3A) and Pichia pastoris (Pp-HjCel3A). Whereas the thermostabilities of HjCel3A and Pp-HjCel3A are the same, Pp-HjCel3A has a higher degree of N-linked glycosylation. Here, we present x-ray structures of HjCel3A with and without glucose bound in the active site. The structures have a three-domain architecture as observed previously for other glycoside hydrolase family 3 β-glucosidases. Both production hosts resulted in HjCel3A structures that have N-linked glycosylations at Asn(208) and Asn(310). In H. jecorina-produced HjCel3A, a single N-acetylglucosamine is present at both sites, whereas in Pp-HjCel3A, the P. pastoris-produced HjCel3A enzyme, the glycan chains consist of 8 or 4 saccharides. The glycosylations are involved in intermolecular contacts in the structures derived from either host. Due to the different sizes of the glycosylations, the interactions result in different crystal forms for the two protein forms.

Three-way Stabilization of the Covalent Intermediate in Amylomaltase, an α-Amylase-like Transglycosylase

Amylomaltases are glycosyl hydrolases belonging to glycoside hydrolase family 77 that are capable of the synthesis of large cyclic glucans and the disproportionation of oligosaccharides. Using protein crystallography, we have generated a flip book movie of the amylomaltase catalytic cycle in atomic detail. The structures include a covalent glycosyl enzyme intermediate and a covalent intermediate in complex with an analogue of a co-substrate and show how the structures of both enzyme and substrate respond to the changes required by the catalytic cycle as it proceeds. Notably, the catalytic nucleophile changes conformation dramatically during the reaction. Also, Gln-256 on the 250s loop is involved in orienting the substrate in the +1 site. The absence of a suitable base in the covalent intermediate structure explains the low hydrolysis activity.

Fluorescence resonance energy transfer sensors for quantitative monitoring of pentose and disaccharide accumulation in bacteria

BACKGROUND

Engineering microorganisms to improve metabolite flux requires detailed knowledge of the concentrations and flux rates of metabolites and metabolic intermediates in vivo. Fluorescence resonance energy transfer sensors represent a promising technology for measuring metabolite levels and corresponding rate changes in live cells. These sensors have been applied successfully in mammalian and plant cells but potentially could also be used to monitor steady-state levels of metabolites in microorganisms using fluorimetric assays. Sensors for hexose and pentose carbohydrates could help in the development of fermentative microorganisms, for example, for biofuels applications. Arabinose is one of the carbohydrates to be monitored during biofuels production from lignocellulose, while maltose is an important degradation product of starch that is relevant for starch-derived biofuels production.

RESULTS

An Escherichia coli expression vector compatible with phage lambda recombination technology was constructed to facilitate sensor construction and was used to generate a novel fluorescence resonance energy transfer sensor for arabinose. In parallel, a strategy for improving the sensor signal was applied to construct an improved maltose sensor. Both sensors were expressed in the cytosol of E. coli and sugar accumulation was monitored using a simple fluorimetric assay of E. coli cultures in microtiter plates. In the case of both nanosensors, the addition of the respective ligand led to concentration-dependent fluorescence resonance energy transfer responses allowing quantitative analysis of the intracellular sugar levels at given extracellular supply levels as well as accumulation rates.

CONCLUSION

The nanosensor destination vector combined with the optimization strategy for sensor responses should help to accelerate the development of metabolite sensors. The new carbohydrate fluorescence resonance energy transfer sensors can be used for in vivo monitoring of sugar levels in prokaryotes, demonstrating the potential of such sensors as reporter tools in the development of metabolically engineered microbial strains or for real-time monitoring of intracellular metabolite during fermentation.

Comparative structural analysis and substrate specificity engineering of the hyperthermostable beta-glucosidase CelB from Pyrococcus furiosus

The substrate specificity of the beta-glucosidase (CelB) from the hyperthermophilic archaeon Pyrococcus furiosus, a family 1 glycosyl hydrolase, has been studied at a molecular level. Following crystallization and X-ray diffraction of this enzyme, a 3.3 A resolution structural model has been obtained by molecular replacement. CelB shows a homo-tetramer configuration, with subunits having a typical (betaalpha)(8)-barrel fold. Its active site has been compared to the one of the previously determined 6-phospho-beta-glycosidase (LacG) from the mesophilic bacterium Lactococcus lactis. The overall design of the substrate binding pocket is very well conserved, with the exception of three residues that have been identified as a phosphate binding site in LacG. To verify the structural model and alter its substrate specificity, these three residues have been introduced at the corresponding positions in CelB (E417S, M424K, F426Y) in different combinations: single, double, and triple mutants. Characterization of the purified mutant CelB enzyme revealed that F426Y resulted in an increased affinity for galactosides, whereas M424K gave rise to a shifted pH optimum (from 5.0 to 6.0). Analysis of E417S revealed a 5-fold and a 3-fold increase of the efficiency of hydrolyzing o-nitrophenol-beta-D-galactopyranoside-6-phosphate, in the single and triple mutants, respectively. In contrast, their activity on nonphosphorylated sugars was largely reduced (30-300-fold). The residue at position E417 in CelB seems to be the determining factor for the difference in substrate specificity between the two types of family 1 glycosidases.

Exploring and exploiting starch-modifying amylomaltases from thermophiles

Starch is a staple food present in water-insoluble granules in many economically important crops. It is composed of two glucose polymers: the linear α-1,4-linked amylose and amylopectin with a backbone of α-1,4-glycosidic bonds and α-1,6-linked side chains. To dissolve starch completely in water it needs to be heated; when it cools down too much the starch solution forms a thermo-irreversible gel. Amylomaltases (EC 2.4.1.25) are enzymes that transfer a segment of an α-1,4-d-glucan to a new 4-position in an acceptor, which may be glucose or another α-1,4-d-glucan. Acting upon starch, amylomaltases can produce cycloamylose or a thermoreversible starch gel, both of which are of commercial interest.

High-resolution structure of a lytic polysaccharide monooxygenase from Hypocrea jecorina reveals a predicted linker as an integral part of the catalytic domain

For decades, the enzymes of the fungus Hypocrea jecorina have served as a model system for the breakdown of cellulose. Three-dimensional structures for almost all H. jecorina cellulose-degrading enzymes are available, except for HjLPMO9A, belonging to the AA9 family of lytic polysaccharide monooxygenases (LPMOs). These enzymes enhance the hydrolytic activity of cellulases and are essential for cost-efficient conversion of lignocellulosic biomass. Here, using structural and spectroscopic analyses, we found that native HjLPMO9A contains a catalytic domain and a family-1 carbohydrate-binding module (CBM1) connected via a linker sequence. A C terminally truncated variant of HjLPMO9A containing 21 residues of the predicted linker was expressed at levels sufficient for analysis. Here, using structural, spectroscopic, and biochemical analyses, we found that this truncated variant exhibited reduced binding to and activity on cellulose compared with the full-length enzyme. Importantly, a 0.95-Å resolution X-ray structure of truncated HjLPMO9A revealed that the linker forms an integral part of the catalytic domain structure, covering a hydrophobic patch on the catalytic AA9 module. We noted that the oxidized catalytic center contains a Cu(II) coordinated by two His ligands, one of which has a His-brace in which the His-1 terminal amine group also coordinates to a copper. The final equatorial position of the Cu(II) is occupied by a water-derived ligand. The spectroscopic characteristics of the truncated variant were not measurably different from those of full-length HjLPMO9A, indicating that the presence of the CBM1 module increases the affinity of HjLPMO9A for cellulose binding, but does not affect the active site.

Hypocrea jecorina CEL6A protein engineering

The complex technology of converting lignocellulose to fuels such as ethanol has advanced rapidly over the past few years, and enzymes are a critical component of this technology. The production of effective enzyme systems at cost structures that facilitate commercial processes has been the focus of research for many years. Towards this end, the H. jecorina cellobiohydrolases, CEL7A and CEL6A, have been the subject of protein engineering at Genencor. Our first rounds of cellobiohydrolase engineering were directed towards improving the thermostability of both of these enzymes and produced variants of CEL7A and CEL6A with apparent melting temperatures above 70°C, placing their stability on par with that of H. jecorina CEL5A (EG2) and CEL3A (BGL1). We have now moved towards improving CEL6A- and CEL7A-specific performance in the context of a complete enzyme system under industrially relevant conditions. Achievement of these goals required development of new screening strategies and tools. We discuss these advances along with some results, focusing mainly on engineering of CEL6A.

Identification of Acceptor Substrate Binding Subsites +2 and +3 in the Amylomaltase from Thermus thermophilus HB8

Glycoside hydrolase family 77 (GH77) belongs to the alpha-amylase superfamily (Clan H) together with GH13 and GH70. GH77 enzymes are amylomaltases or 4-alpha-glucanotransferases, involved in maltose metabolism in microorganisms and in starch biosynthesis in plants. Here we characterized the amylomaltase from the hyperthermophilic bacterium Thermus thermophilus HB8 (Tt AMase). Site-directed mutagenesis of the active site residues (Asp293, nucleophile; Glu340, general acid/base catalyst; Asp395, transition state stabilizer) shows that GH77 Tt AMase and GH13 enzymes share the same catalytic machinery. Quantification of the enzyme's transglycosylation and hydrolytic activities revealed that Tt AMase is among the most efficient 4-alpha-glucanotransferases in the alpha-amylase superfamily. The active site contains at least seven substrate binding sites, subsites -2 and +3 favoring substrate binding and subsites -3 and +2 not, in contrast to several GH13 enzymes in which subsite +2 contributes to oligosaccharide binding. A model of a maltoheptaose (G7) substrate bound to the enzyme was used to probe the details of the interactions of the substrate with the protein at acceptor subsites +2 and +3 by site-directed mutagenesis. Substitution of the fully conserved Asp249 with a Ser in subsite +2 reduced the activity 23-fold (for G7 as a substrate) to 385-fold (for maltotriose). Similar mutations reduced the activity of alpha-amylases only up to 10-fold. Thus, the characteristics of acceptor subsite +2 represent a main difference between GH13 amylases and GH77 amylomaltases.

Single amino acid residue changes in subsite -1 of inulosucrase from Lactobacillus reuteri 121 strongly influence the size of products synthesized

Bacterial fructansucrase enzymes belong to glycoside hydrolase family 68 and catalyze transglycosylation reactions with sucrose, resulting in the synthesis of fructooligosaccharides and/or a fructan polymer. Significant differences in fructansucrase enzyme product specificities can be observed, i.e. in the type of polymer (levan or inulin) synthesized, and in the ratio of polymer versus fructooligosaccharide synthesis. The Lactobacillus reuteri 121 inulosucrase enzyme produces a diverse range of fructooligosaccharide molecules and a minor amount of inulin polymer [with beta(2-1) linkages]. The three-dimensional structure of levansucrase (SacB) of Bacillus subtilis revealed eight amino acid residues interacting with sucrose. Sequence alignments showed that six of these eight amino acid residues, including the catalytic triad (D272, E523 and D424, inulosucrase numbering), are completely conserved in glycoside hydrolase family 68. The other three completely conserved residues are located at the -1 subsite (W271, W340 and R423). Our aim was to investigate the roles of these conserved amino acid residues in inulosucrase mutant proteins with regard to activity and product profile. Inulosucrase mutants W340N and R423H were virtually inactive, confirming the essential role of these residues in the inulosucrase active site. Inulosucrase mutants R423K and W271N were less strongly affected in activity, and displayed an altered fructooligosaccharide product pattern from sucrose, synthesizing a much lower amount of oligosaccharide and significantly more polymer. Our data show that the -1 subsite is not only important for substrate recognition and catalysis, but also plays an important role in determining the size of the products synthesized.

Activity of hyperthermophilic glycosynthases is significantly enhanced at acidic pH

We have previously shown that the hyperthermophilic glycosynthase from Sulfolobus solfataricus (Ssbeta-glyE387G) can promote the synthesis of branched oligosaccharides from activated beta-glycosides, at pH 6.5, in the presence of 2 M sodium formate as an external nucleophile. In an effort to increase the synthetic potential of hyperthermophilic glycosynthases, we report a new method to reactivate the Ssbeta-glyE387G glycosynthase and two novel mutants in the nucleophile of the beta-glycosidases from the hyperthermophilic Archaea Thermosphaera aggregans (Tabeta-gly) and Pyrococcus furiosus (CelB). We describe here that, at pH 3.0 and low concentrations of sodium formate buffer, the three hyperthermophilic glycosynthases show k(cat) values similar to those of the wild-type enzymes and 17-fold higher than those observed at the usual reactivation conditions in 2 M sodium formate at pH 6.5. Moreover, at acidic pH the three reactivated mutants have wide substrate specificity and improved efficiency in the synthetic reaction. The data reported suggest that the reactivation conditions modify the ionization state of the residue acting as an acid/base catalyst. This new reactivation method can be of general applicability on hyperthermophilic glycosynthases whose intrinsic stability allows their exploitation as synthetic tools at low pH.

DNA family shuffling of hyperthermostable beta-glycosidases

The structural compatibility of two hyperthermostable family 1 glycoside hydrolases, Pyrococcus furiosus CelB and Sulfolobus solfataricus LacS, as well as their kinetic potential were studied by construction of a library of 2048 hybrid beta-glycosidases using DNA family shuffling. The hybrids were tested for their thermostability, ability to hydrolyse lactose and sensitivity towards inhibition by glucose. Three screening rounds at 70 degrees C led to the isolation of three high-performance hybrid enzymes (hybrid 11, 18 and 20) that had 1.5-3.5-fold and 3.5-8.6-fold increased lactose hydrolysis rates compared with parental CelB and LacS respectively. The three variants were the result of a single crossover event, which gave rise to hybrids with a LacS N-terminus and a main CelB sequence. Constructed three-dimensional models of the hybrid enzymes revealed that the catalytic (betaalpha)(8)-barrel was composed of both LacS and CelB elements. In addition, an extra intersubunit hydrogen bond in hybrids 18 and 20 might explain their superior stability over hybrid 11. This study demonstrates that extremely thermostable enzymes with limited homology and different mechanisms of stabilization can be efficiently shuffled to form stable hybrids with improved catalytic features.

Activity and stability of hyperthermophilic enzymes: a comparative study on two archaeal beta-glycosidases

S beta gly and CelB are well-studied hyperthermophilic glycosyl hydrolases, isolated from the Archaea Sulfolobus solfataricus and Pyrococcus furiosus, respectively. Previous studies revealed that the two enzymes are phylogenetically related; they are very active and stable at high temperatures, and their overall three-dimensional structure is very well conserved. To acquire insight in the molecular determinants of thermostability and thermoactivity of these enzymes, we have performed a detailed comparison, under identical conditions, of enzymological and biochemical parameters of S beta gly and CelB, and we have probed the basis of their stability by perturbations induced by temperature, pH, ionic strength, and detergents. The major result of the present study is that, although the two enzymes are remarkably similar with respect to kinetic parameters, substrate specificity, and reaction mechanism, they are strikingly different in stability to the different physical or chemical perturbations induced. These results provide useful information for the design of further experiments aimed at understanding the structure-function relationships in these enzymes.

Substrate specificity engineering of beta-mannosidase and beta-glucosidase from Pyrococcus by exchange of unique active site residues

A beta-mannosidase gene (PH0501) was identified in the Pyrococcus horikoshii genome and cloned and expressed in E. coli. The purified enzyme (BglB) was most specific for the hydrolysis of p-nitrophenyl-beta-D-mannopyranoside (pNP-Man) (Km: 0.44 mM) with a low turnover rate (kcat: 4.3 s(-1)). The beta-mannosidase has been classified as a member of family 1 of glycoside hydrolases. Sequence alignments and homology modeling showed an apparent conservation of its active site region with, remarkably, two unique active site residues, Gln77 and Asp206. These residues are an arginine and asparagine residue in all other known family 1 enzymes, which interact with the catalytic nucleophile and equatorial C2-hydroxyl group of substrates, respectively. The unique residues of P. horikoshii BglB were introduced in the highly active beta-glucosidase CelB of Pyrococcus furiosus and vice versa, yielding two single and one double mutant for each enzyme. In CelB, both substitutions R77Q and N206D increased the specificity for mannosides and reduced hydrolysis rates 10-fold. In contrast, BglB D206N showed 10-fold increased hydrolysis rates and 35-fold increased affinity for the hydrolysis of glucosides. In combination with inhibitor studies, it was concluded that the substituted residues participate in the ground-state binding of substrates with an equatorial C2-hydroxyl group, but contribute most to transition-state stabilization. The unique activity profile of BglB seems to be caused by an altered interaction between the enzyme and C2-hydroxyl of the substrate and a specifically increased affinity for mannose that results from Asp206.

Structural and functional studies of the glycoside hydrolase family 3 β-glucosidase Cel3A from the moderately thermophilic fungus Rasamsonia emersonii

The filamentous fungus Hypocrea jecorina produces a number of cellulases and hemicellulases that act in a concerted fashion on biomass and degrade it into monomeric or oligomeric sugars. β-Glucosidases are involved in the last step of the degradation of cellulosic biomass and hydrolyse the β-glycosidic linkage between two adjacent molecules in dimers and oligomers of glucose. In this study, it is shown that substituting the β-glucosidase from H. jecorina (HjCel3A) with the β-glucosidase Cel3A from the thermophilic fungus Rasamsonia emersonii (ReCel3A) in enzyme mixtures results in increased efficiency in the saccharification of lignocellulosic materials. Biochemical characterization of ReCel3A, heterologously produced in H. jecorina, reveals a preference for disaccharide substrates over longer gluco-oligosaccharides. Crystallographic studies of ReCel3A revealed a highly N-glycosylated three-domain dimeric protein, as has been observed previously for glycoside hydrolase family 3 β-glucosidases. The increased thermal stability and saccharification yield and the superior biochemical characteristics of ReCel3A compared with HjCel3A and mixtures containing HjCel3A make ReCel3A an excellent candidate for addition to enzyme mixtures designed to operate at higher temperatures.

Determination of product inhibition of CBH1, CBH2, and EG1 using a novel cellulase activity assay

The hydrolysis of lignocellulosic biomass by degrading enzymes (cellulases) has emerged as a promising process within the bio-ethanol industry. Yet, understanding all the intricacies of how these enzymes work has been a challenging task. Substrate-enzyme interaction in complex feed mixtures, the recalcitrance of the crystalline structure of cellulose and enzyme inactivation by product inhibition, nonproductive binding to lignin, and process stress are only some of the problems standing in the way of creating an effective and efficient process to bio-ethanol production. This study focuses on the product inhibition of cellobiohydrolases and endoglucanases. Here, we present a method of studying product inhibition by measuring the decrease in substrate, utilizing the fluorescent properties of a calcofluor dye.

Persistence of tertiary structure in 7.9 M guanidinium chloride: the case of endo-beta-1,3-glucanase from Pyrococcus furiosus

The Pyrococcus furiosus endo-beta-1,3-glucanase belongs to the subfamily of laminarinase, which can be classified as "all beta proteins" as confirmed by deconvolution of far-UV CD and FTIR spectra. The persistence of a significant amount of tertiary structure in 7.9 M GdmCl, as indicated by near-UV CD spectroscopy, accompanied by a red-shift of the maximum fluorescence emission wavelength is a peculiar property of this hyperthermophilic endoglucanase. The possibility to observe tertiary structure elements under extremely denaturing conditions is notable and is limited to only a few examples. The unusual resistance toward guanidinium chloride denaturation is paralleled by a notable stability at extremely low pH and at high temperature. The analysis of the protein spectral properties indicates that the secondary structure elements are preserved down to pH 1.0 and up to 90 degrees C at pH 7.4 and pH 3.0. The study of the conditions that determine the persistence of residual structure at high denaturant concentration and the examination of these structures are particularly interesting because these state(s) may be preliminary or coincident with the coalescence of protein aggregates or to the formation of amyloid-like fibrils, and they may serve as seeds of protein folding.

Structural studies of a glycoside hydrolase family 3 β-glucosidase from the model fungus Neurospora crassa

The glycoside hydrolase family 3 (GH3) β-glucosidases are a structurally diverse family of enzymes. Cel3A from Neurospora crassa (NcCel3A) belongs to a subfamily of key enzymes that are crucial for industrial biomass degradation. β-Glucosidases hydrolyse the β-1,4 bond at the nonreducing end of cellodextrins. The hydrolysis of cellobiose is of special importance as its accumulation inhibits other cellulases acting on crystalline cellulose. Here, the crystal structure of the biologically relevant dimeric form of NcCel3A is reported. The structure has been refined to 2.25 Å resolution, with an Rcryst and Rfree of 0.18 and 0.22, respectively. NcCel3A is an extensively N-glycosylated glycoprotein that shares 46% sequence identity with Hypocrea jecorina Cel3A, the structure of which has recently been published, and 61% sequence identity with the thermophilic β-glucosidase from Rasamsonia emersonii. NcCel3A is a three-domain protein with a number of extended loops that deepen the active-site cleft of the enzyme. These structures characterize this subfamily of GH3 β-glucosidases and account for the high cellobiose specificity of this subfamily.