Controlling the Trajectories of Nano/Micro Particles Using Light-Actuated Marangoni Flow

The ability to manipulate small objects and to produce patterns on the nano- and microscale is of great importance, both with respect to fundamentals and technological applications. The manipulation of particles with diameters of the order of 100 nm or below is a challenge because of their Brownian motion but also because of the scaling behavior of methods such as optical trapping. The unification of optical and hydrodynamic forces is a potential route toward the manipulation of tiny objects. Herein we demonstrate the trapping and manipulation of nano- and microparticles based on interfacial flows controlled by visible light, a method we denote as "Light-Actuated Marangoni Tweezer (LAMT)". We experimentally study the manipulation of particles having diameters ranging from 20 nm to 10 μm, including quantum dots and polystyrene nano/microparticles. The particles can be manipulated by scanning a light beam along a liquid surface. In this way, we are able to define almost arbitrary particle trajectories, for example, in the form of letters. In addition, we are able to handle a number of particles in parallel by creating an optical "landscape" consisting of a multitude of laser spots. The inherent advantages of LAMTs are the linear scaling of the trapping force with the particle diameter and the fact that the force is less dependent on particle properties than in the case of conventional methods.

Energy harvesting through gas dynamics in the free molecular flow regime between structured surfaces at different temperatures

For a gas confined between surfaces held at different temperatures the velocity distribution shows a significant deviation from the Maxwell distribution when the mean free path of the molecules is comparable to or larger than the channel dimensions. If one of the surfaces is suitably structured, this nonequilibrium distribution can be exploited for momentum transfer in a tangential direction between the two surfaces. This opens up the possibility to extract work from the system which operates as a heat engine. Since both surfaces are held at constant temperatures, the mode of momentum transfer is different from the thermal creep flow that has gained more attention so far. This situation is studied in the limit of free-molecular flow for the case that an unstructured surface is allowed to move tangentially with respect to a structured surface. Parameter studies are conducted, and configurations with maximum thermodynamic efficiency are identified. Overall, it is shown that significant efficiencies can be obtained by tangential momentum transfer between structured surfaces.

[Cutaneous damage after acute exposure to ionizing radiation: decisive for the prognosis of radiation accident victims]

The cutaneous radiation syndrome includes all deterministic effects on the skin and visible parts of the mucosa from ionizing radiation. The Intensity and duration of radiation-induced skin symptoms depend on the kind and quality of ionizing radiation. The aim of this study was the investigation of the importance of the time of the development of radiation induced-skin effects on the prognosis of radiation accident victims. Clinical data about radiation accident victims from the database SEARCH were used. 211 cases with good documentation regarding radiation-induced skin effects were selected. From these 211 patients, 166 survived the acute phase of the acute radiation syndrome, while 45 died during the acute phase. Among those patients who did not survive the acute phase, 82.2 % showed their first documented radiation-induced skin symptoms during the first 3 days after radiation exposure. Of those patients whose first documented radiation-induced skin symptoms appeared on or after day four, 94.2 % survived the acute phase. The time to the occurrence of the first radiation-induced skin effects is diagnostically significant. The skin plays an important role in the clinical course of radiation syndromes and in the development of radiation-induced multi-organ failure. In a retrospective data analysis like this, the quality of data might be a limitation.

Isotachophoresis with emulsions

An experimental study on isotachophoresis (ITP) in which an emulsion is used as leading electrolyte (LE) is reported. The study aims at giving an overview about the transport and flow phenomena occurring in that context. Generally, it is observed that the oil droplets initially dispersed in the LE are collected at the ITP transition zone and advected along with it. The detailed behavior at the transition zone depends on whether or not surfactants (polyvinylpyrrolidon, PVP) are added to the electrolytes. In a system without surfactants, coalescence is observed between the droplets collected at the ITP transition zone. After having achieved a certain size, the droplets merge with the channel walls, leaving an oil film behind. In systems with PVP, coalescence is largely suppressed and no merging of droplets with the channel walls is observed. Instead, at the ITP transition zone, a droplet agglomerate of increasing size is formed. In the initial stages of the ITP experiments, two counter rotating vortices are formed inside the terminating electrolyte. The vortex formation is qualitatively explained based on a hydrodynamic instability triggered by fluctuations of the number density of oil droplets.

Thermally driven flows between a Leidenfrost solid and a ratchet surface

The significance of thermally driven flows for the propulsion of Leidenfrost solids on a ratchet surface is studied based on a numerical solution of the Boltzmann equation. The resulting flow patterns are dominated by vortices developing at the edges of the ratchet teeth. In a previous analysis it had been claimed that thermally driven flows could cause the propulsion of Leidenfrost objects. In contrast to that analysis, it is found that such flows make an insignificant contribution to the thrust of Leidenfrost solids on ratchet surfaces, which is dominated by the pressure-driven flow due to the sublimating solid.

Propulsion mechanisms for Leidenfrost solids on ratchets

We propose a model for the propulsion of Leidenfrost solids on ratchets based on viscous drag due to the flow of evaporating vapor. The model assumes pressure-driven flow described by the Navier-Stokes equations and is mainly studied in lubrication approximation. A scaling expression is derived for the dependence of the propulsive force on geometric parameters of the ratchet surface and properties of the sublimating solid. We show that the model results as well as the scaling law compare favorably with experiments and are able to reproduce the experimentally observed scaling with the size of the solid.

Transport and separation of micron sized particles at isotachophoretic transition zones

Conventionally, isotachophoresis (ITP) is used for separation of ionic samples according to their electrophoretic mobilities. We demonstrate that the scope of ITP applications may be extended toward particle concentration and separation. Owing to the distributions of electrolyte concentration and electric field inside a transition zone between two electrolytes, a number of different forces act on a small particle. As far as possible, we provide estimates for the order of magnitude of these forces and analyze their scaling with the particle size and the electric-field strength. Furthermore, we experimentally demonstrate that polymer beads of 5 μm diameter dispersed in a high mobility "leading" electrolyte are picked up and carried along by an ITP transition zone which is formed with a low mobility "trailing" electrolyte. By studying the particle positions and trajectories, we show that impurities in the electrolytes play a significant role in the experiments. Additionally, it is experimentally shown that different types of beads can be separated at an ITP transition zone. In particular, beads of 1 μm diameter are not carried along with the transition zone, in contrast to the 5 μm beads. The presented technique thus adds to the portfolio of electrokinetic transport, concentration, and separation methods in microfluidics.

PL and FTIR Absorption Study on Porous Silicon in Situ During Etching, in Oxygen Ambient, and After Chemical Oxidation

Steady state and time-resolved photoluminescence (PL) and Fourier-transform infrared (FTIR) spectroscopy have been performed in situ during etching, on “as prepared” porous Si in air under laser exposure and on chemically oxidized porous Si. We suppose that PLdegradation of “as prepared” porous Si is caused by creating non-radiative defect centers during photooxidation. Chemically oxidized porous Si shows increased PL intensity and longer recombination lifetimes as compared to non-oxidized samples. We conclude, that an oxide layer with low defect density on the inner surface of chemically oxidized porous Si reduces the non-radiative recombination rate.

Origin of the Infrared Band From Porous Silicon

The photoluminescence (PL) infrared (IR)-band of p-doped porous Si (PS) films is studied by steady-state and time-resolved PL and by photoluminescence excitation (PLE) in detail. In analogy to the S-band in the visible the IR-band shifts to higher energies with reduced average nanocrystal size. The IR- and S-bands are very different in their decay behavior and in their recombination lifetimes. The temperature-dependent PL intensity shows non-exponential decay with lifetime distributions in the nsec-µsec range in contrast to the stretched exponential decay shape of the S-band corresponding to lifetime distributions in the μsec -msec range. The origin of the IR-band is likely related to radiative recombination at deep defects in Si nanocrystals with quantum-upshifted band gaps.

Thermocapillary flow on superhydrophobic surfaces

A liquid in Cassie-Baxter state above a structured superhydrophobic surface is ideally suited for surface driven transport due to its large free surface fraction in close contact to a solid. We investigate thermal Marangoni flow over a superhydrophobic array of fins oriented parallel or perpendicular to an applied temperature gradient. In the Stokes limit we derive an analytical expression for the bulk flow velocity above the surface and compare it with numerical solutions of the Navier-Stokes equation. Even for moderate temperature gradients comparatively large flow velocities are induced, suggesting to utilize this principle for microfluidic pumping.

Micro contactor based on isotachophoretic sample transport

It is demonstrated how isotachophoresis (ITP) in a microfluidic device may be utilized to bring two small sample volumes into contact in a well-controlled manner. The ITP contactor serves a similar purpose as micromixers that are designed to mix two species rapidly in a microfluidic channel. In contrast to many micromixers, the ITP contactor does not require complex channel architectures and allows a sample processing in the spirit of "digital microfluidics", i.e. the samples always remain in a compact volume. It is shown that the ITP zone transport through microchannels proceeds in a reproducible and predictable manner, and that the sample trajectories follow simple relationships obtained from Ohm's law. Firstly, the micro contactor can be used to synchronize two ITP zones having reached a channel at different points in time. Secondly, fulfilling its actual purpose it is capable of bringing two samples in molecular contact via an interpenetration of ITP zones. It is demonstrated that the contacting time is proportional to the ITP zone extension. This opens up the possibility of using that type of device as a special type of micromixer with "mixing times" significantly below one second and an option to regulate the duration of contact through specific parameters such as the sample volume. Finally, it is shown how the micro contactor can be utilized to conduct a hybridization reaction between two ITP zones containing complementary DNA strands.

Hands-free sample preparation platform for nucleic acid analysis

A Lab-On-Chip system with an instrument is presented which is capable of performing total sample preparation and automated extraction of nucleic acid from human cell samples fixed in a methanol based solution. The target application is extraction of mRNA from cervical liquid based cytology specimens for detection of transformed HPV-infections. The device accepts 3 ml of sample and performs the extraction in a disposable polymer chip of credit card size. All necessary reagents for cell lysis, washing, and elution are stored on-chip and the extraction is performed in two filter stages; one for cell pre-concentration and the other for nucleic acid capture. Tests performed using cancer cell lines and cervical liquid based cytology specimens confirm the extraction of HPV-mRNA by the system.

[Development of a laser-optical tomograph for demonstration of CT imaging without ionizing radiation]

Computed X-ray tomography (CT) is one of the most powerful diagnostic procedures in medicine. In this study, we developed a laser-optical CT scanner for the use by students as part of their curriculum in biomedical engineering. Our CT set-up employs a linear-scan technique where the measurement objects (light absorbing phantoms embedded in immersion oil), the light emitter (modulated laserdiode), and the detector (photodiode) are moved by linear-step motors. The spatial resolution is limited by the width of the laser beam (2 mm) and the smallest achievable raster step size (0.02 mm). Optical tomographic images of various objects can be measured within a few minutes and allow the demonstration of imaging principles like extinction, scanning, projection, and reconstruction techniques.

[Long-term results of coronary angioplasty in relation to vessel size]

Repeat angiography was performed after 3-4 months in 927 of 1386 consecutive patients (67%) who had a successful percutaneous coronary angioplasty (PTCA) between 1986 and 1988. The degree of coronary artery stenosis was determined angiographically before PTCA, immediately after and 3-4 months later. Patients were assigned to one of four groups according to balloon diameter at dilatation: Group 1: 1.5-2.0 mm; group 2: 2,5 mm; group 3: 3.0 mm; group 4: 3.4-4.2 mm. Vessel wall proliferation occurred in all four groups after PTCA. In patients with angiographically demonstrated recurrence (first recurrence: 308 patients, second recurrence: 43 patients) another balloon dilatation was undertaken and a repeat angiography 3-4 months later. Long-term success rate (less than 50% stenosis) differed significantly according to the post-PTCA vessel diameter: 48% in group 1, 63% in group 2, 66% in group 3 and 80% in group 4 (analysis of variance: P less than 0.001). PTCA thus produces better long-term results in large than in small vessels.

[Long-term success of coronary angioplasty after repeated treatment]

To ascertain the long-term results after second and third angioplasties for coronary stenosis the coronary angiograms from 1504 consecutive patients with coronary heart disease (1211 men, 293 women, mean age 57 [27-82] years) were retrospectively surveyed. A good initial response (at least 20% reduction in stenosis) was achieved in 295 out of 306 second angioplasties (95.5%), and in all 36 third angioplasties. Viewed overall, these results are significantly better (P less than 0.005) than those achieved at the initial angioplasty (1386 out of 1504 patients; 92.2%). The reduction in the severity of the stenosis achieved at the second angioplasty (from 86 to 24%) and at the third angioplasty (from 86 to 26%) was the same as at the first angioplasty (from 88 to 28%). Serious complications after the first angioplasty were infrequent (death in 0.2%, emergency bypass in 0.4%, myocardial infarction in 0.5%), and no complications were noted after second and third angioplasties. A good long-term outcome (at least 20% reduction in stenosis at 3-4 months) was slightly more frequent after the second and third angioplasties (103 out of 170 [60.6%] and 14 out of 17 patients, respectively) than after the first intervention (532 out of 926 patients; 57.5%). In keeping with these results, the degree of stenosis found at follow-up angiography was significantly lower (first intervention 54.8%, second intervention 50.3%, third intervention 36.9%). There were only 57 patients (3.8%) who ultimately required operative treatment. These figures indicate that the probability of a good long-term outcome from coronary angioplasty increases each time the stretching operation is repeated. Only a very small proportion of patients will require bypass surgery.