Municipal landfill leachate nitrification in RBC biofilm - process efficiency and molecular analysis of microbial structure

Landfill leachates were treated using a two-stage rotating biological contactor (RBC). At an ammonium load of 1.92gN-NH(4)/m(2)d, complete nitrification was obtained at the first stage; however, at a higher load (3.6gN-NH(4)/m(2)d) a two-stage system was needed to obtain complete nitrification. A further increase in the ammonium load to 4.79gN-NH(4)/m(2)d and 6.63gN-NH(4)/m(2)d caused a decrease of overall nitrification efficiency to 74.4% and 71.6%, respectively. Randomly amplified DNA analysis of bacteria present in the RBC revealed that the bacterial community differed over time. Regardless of the ammonium load, Nitrosomonas europaea and Nitrosomonas eutropha were the dominating species. The performed analyses provide a clear picture of bacterial population changes in response to changes of ammonium load during landfill leachate treatment.

Effect of the form and deacetylation degree of chitosan sorbents on sorption effectiveness of Reactive Black 5 from aqueous solutions

The article presents the impact of a chitosan sorbent form (flakes/hydrogel granules) and the degree of its deacetylation (DD=75%/DD=85%/DD=90%) on the effectiveness of sorption of a popular textile dye Reactive Black 5 (RB5). The effect of pH on dye sorption effectiveness was examined as well as RB5 sorption kinetics and RB5 sorption capacity of the chitosan sorbent were tested. The highest sorption capacity (1559.7mg/g) was obtained for the chitosan hydrogel in the form of granules (DD=90%). Due to a loose structure and an easy access to sorption centers, chitosan hydrogel granules may ensure up to 224% higher sorption capacity (Q_DD75%=1307.5mg/g) than chitosan in the form of flakes (Q_DD75%=403.4mg/g). The sorption effectiveness of the tested dye was observed to increase in the range of DD=75%<DD=85%<DD=90%. The deacetylation degree of chitosan had a particularly large impact on RB5 sorption effectiveness by chitosan in the form of flakes. The effectiveness of adsorption on the flakes with a deacetylation degree DD=90% was 1049.6mg/g and was by 160% higher than on the flakes with DD=75%.

Hydrogel chitosan sorbent application for nutrient removal from soilless plant cultivation wastewater

In this study, we determined the effectiveness of removal of nutrients (nitrates and orthophosphates) from greenhouse wastewaters (GW) using non-cross-linked chitosan (CHs) and chitosan cross-linked with epichlorohydrin (CHs-ECH) in the form of hydrogel beads. GW used in the study had the following parameters: N-NO₃ 621.1 mg/L, P-PO₄ 60.8 mg/L, SO₄^2- 605.0 mg/L, Cl^- 0.9 mg/L, Ca²⁺ 545.0 mg/L, Mg²⁺ 178.0 mg/L, K⁺ 482.0 mg/L, hardness 113° dH, and pH 6.2. The scope of the study included determination of the effect of pH on wastewater composition and effectiveness of nutrient sorption, analyses of nutrient sorption kinetics, and analyses of the effect of sorbent dose on percentage removal of nutrients from GW. CHs-ECH was able to sorb 79.4% of P-PO₄ and 76.7% of N-NO₃ from GW, whereas CHs to remove 92.8% of P-PO₄ and 53.2% of N-NO₃.

The Use of Chitin from the Molts of Mealworm (Tenebrio molitor) for the Removal of Anionic and Cationic Dyes from Aqueous Solutions

The possibility of using chitin from the molts of an insect-ealworm (Tenebrio molitor) to remove anionic (RB5, RY84) and cationic dyes (BV10, BR46) from aqueous solutions was investigated. The scope of the research included, among others: Characteristics of chitin from mealworms (FTIR, SEM, pH_PZC), the effect of pH on sorption efficiency, sorption kinetics (pseudo-first, pseudo-second order, intramolecular diffusion models) and the determination of the maximum sorption capacity (Langmuir and Freundlich models). The sorption efficiency of anionic dyes on chitin from mealworm was the highest at pH 2-3, and for cationic dyes at pH 6. The equilibrium time of sorption of anionic dyes was 240-300 min and for cationic dyes it was 180-240 min. The experimental data on dye sorption kinetics was best described by the pseudo-second order model. The maximum sorption capacity of chitin from the mealworm for the anionic dyes RB5 and RY84 was 121.15 mg/g and 138.55 mg/g, respectively, and was higher than with some carbon-based materials (literature data). In the case of cationic dyes, the sorption capacity of the tested chitin was lower and reached 3.22 mg/g and 59.56 mg/g for BV10 and BR46, respectively.

The share of electrochemical reduction, hydrogenotrophic and heterotrophic denitrification in nitrogen removal in rotating electrobiological contactor (REBC) treating wastewater from soilless cultivation systems

There is a growing global environmental problem of agricultural wastewater from soilless plant cultivation systems. In most countries dominate open fertilization systems, in which excess of nutrient solution is discharged in an uncontrolled way into the ground inside greenhouses or adjacent areas. Wastewater from such systems is characterized by a very high concentration of nitrogen and phosphorus compounds and their discharge into the environment causes significant pollution of the water and soil environment. The goal of the research was to determine the contribution of electrochemical reduction of nitrogen, hydrogenotrophic and heterotrophic denitrification in the process of nitrogen removal in a rotating electrobiological contactor (REBC) depending on hydraulic retention time (HRT) and electric current density (J). Synthetic sewage with characteristics corresponding to wastewater from soilless cultivation of tomatoes was the subject of the research. The first part of the experiment included determination of the effect of HRT on the effectiveness of bio-processes of nutrients removal in a rotating biological contactor (RBC). The second concerned the effect of HRT and J on the effectiveness of nutrients removal in a rotating electrochemical contactor (RECC), while the third part - the effect of HRT and J on the effectiveness of nutrients removal in REBC. RBC was characterized by low efficiency of denitrification (6.2 to 9.2%). The effectiveness of nitrogen removal in RECC was determined by both electric current density and hydraulic retention time. The highest efficiency was 53.4%. REBC nitrogen removal effectiveness was higher than in RBC and in RECC. The nitrogen removal efficiency increased along with increasing values of HRT, reaching the maximum value of 68.6% for J=10.0A/m² and HRT=24h. The contribution of hydrogenotrophic denitrification in total nitrogen removal increased with the increase of electric current density.

The use of spent coffee grounds and spent green tea leaves for the removal of cationic dyes from aqueous solutions

This study aimed to examine sorption effectiveness of cationic dyes: Basic Red 46 (BR46) and Basic Violet 10 (BV10) onto spent coffee ground (CG) and spent green tea leaves (GTL). The scope of the study included, i.a.: sorbent FTIR spectra analysis, determination of pH effect on dye sorption effectiveness, analysis of dye sorption kinetics, and determination of maximal sorption capacity of the sorbents. The effectiveness of BR46 sorption on the sorbents tested was the highest at pH 6 and that of BV10 at pH 3. Both sorbents caused changes in solution pH during the sorption process, due to the system tending to reach the pH value approximating the pH_ZPC (pH_PZC = 7.55 for CG and pH_PZC = 7.05 for GTL). The time needed to reach BR46 and BV10 sorption equilibrium onto CG and GTL ranged from 180 to 240 min. The intramolecular diffusion model demonstrated that the sorption of cationic dyes onto CG and GTL proceeded in three phases differing in the intensity and duration. The maximal sorption capacity of CG reached 179.4 mg/g for BR46 and 59.3 mg/g for BV10. The sorption capacity of GTL was lower and reached 58.0 mg/g for BR46 and 26.7 mg/g for BV10.

The use of air-lift adsorber with a floating filling from a cross-linked chitosan hydrogels for Reactive Black 5 removal

This work substantially extends knowledge on the possibilities of treating colored industrial wastewater via sorption under flow conditions. The presented study aimed to determine the effectiveness of Reactive Black 5 (RB5) dye sorption from aqueous solutions under dynamic (flow) conditions in an unconventional air-lift type loop reactor with a filling made of hydrogel chitosan sorbents. The dye was removed from mono-component solutions (deionized water + RB5) and synthetic dyeing wastewater containing RB5 dye, NaCl (3 g/L), and an anti-creasing agent—UNICREASE JET (2 g/L). The sorbents tested in the study included: unmodified chitosan (CHs), chitosan ionically cross-linked with sodium citrate (CHs-CIT), and chitosan covalently cross-linked with epichlorohydrin (CHs-ECH). Each experimental series aimed to determine: the bed break-through time (C_E = 0.1 C₀), time of depletion of the sorbent’s sorption properties (C_E = C₀), and maximal sorption capacity of the sorbents (Q_max). The data obtained under dynamic conditions were described using Thomas, Yoon–Nelson, and Bohart–Adams models. The volume of the solution effectively treated in the air-lift reactor was significantly affected by chitosan sorbent type. At C₀ = 50 mg RB5/L, the adsorber with the filling made of 1 g d.m. CHs allowed for the effective treatment of 4.6 L of synthetic wastewater (Q_max = 1504.7 mg/g), whereas CHs-ECH ensured 34.6 L of the treated solution (Q_max = 3212.9 mg/g).

Effect of the C:N:P ratio on the denitrifying dephosphatation in a sequencing batch biofilm reactor (SBBR)

A series of investigations were conducted using sequencing batch biofilm reactor (SBBR) to explore the influence of C:N:P ratio on biological dephosphatation including the denitrifying dephosphatation and the denitrification process. Biomass in the reactor occurred mainly in the form of a biofilm attached to completely submerged disks. Acetic acid was used as the source of organic carbon. C:N:P ratios have had a significant effect on the profiles of phosphate release and phosphate uptake and nitrogen removal. The highest rates of phosphate release and phosphate uptake were recorded at the C:N:P ratio of 140:70:7. The C:N ratio of 2.5:1 ensured complete denitrification. The highest rate of denitrification was achieved at the C:N:P ratio of 140:35:7. The increase of nitrogen load caused an increase in phosphates removal until a ratio C:N:P of 140:140:7. Bacteria of the biofilm exposed to alternate conditions of mixing and aeration exhibited enhanced intracellular accumulation of polyphosphates. Also, the structure of the biofilm encouraged anaerobic-aerobic as well as anoxic-anaerobic and absolutely anaerobic conditions in a SBBR. These heterogeneous conditions in the presence of nitrates may be a significant factor determining the promotion of denitrifying polyphosphate accumulating organism (DNPAO) development.

The Effect of Modifying Canadian Goldenrod (Solidago canadensis) Biomass with Ammonia and Epichlorohydrin on the Sorption Efficiency of Anionic Dyes from Water Solutions

This study examined the effect of modifying Canadian goldenrod (Solidago canadensis) biomass on its sorption capacity of Reactive Black 5 (RB5) and Reactive Yellow 84 anionic dyes. The scope of the research included the characteristics of sorbents (FTIR, elementary analysis, pH_PZC), the effect of pH on dye sorption efficiency, sorption kinetics, and the maximum sorption capacity (describing the data with Langmuir 1 and 2 and Freundlich models). FTIR analyses showed the appearance of amine functional groups in the materials modified with ammonia water, which is indicative of the sorbent amination process. The amination efficiency was higher in the case of materials pre-activated with epichlorohydrin, which was confirmed by elemental analysis and pH_PZC values. The sorption efficiency of RB5 and RY84 on the tested sorbents was the highest in the pH range of 2-3. The sorption capacity of the goldenrod biomass pre-activated with epichlorohydrin and then aminated with ammonia water was 71.30 mg/g and 59.29 mg/g in the case of RB5 and RY84, respectively, and was higher by 2970% and 2510%, respectively, compared to the unmodified biomass. Amination of biomass pre-activated with epichlorohydrin can increase its sorption capacity, even by several dozen times.

The Amination of Waste Newsprint Paper with Various Aminating Agents (Ammonia Water, Ethylenediamine, and Diethylenetriamine) to Improve the Sorption Efficiency of Anionic Dyes

This study aimed to investigate the effect of aminating waste newsprint paper with different aminating agents (ammonia/ammonia water, ethylenediamine, and diethylenetriamine) for the sorption efficiency of Reactive Black 5 (RB5) and Reactive Yellow 84 (RY84) dyes. To increase the amination efficiency, the paper material was pre-activated with epichlorohydrin. The scope of this study included the characterization of the sorbents tested (FTIR, elemental analysis, BET surface area, porosity, and pHPZC), determination of the influence of pH on dye sorption efficiency, sorption kinetics, and the maximum sorption capacity of the dyes. The study results showed that amination with ethylenediamine and diethylenetriamine introduced 87% and 194% more amine groups into the sorbent's structure compared to the treatment with ammonia. The sorption efficiency of RB5 and RY84 on the sorbents tested was the highest in the pH range of 2-3. The sorption equilibrium time ranged from 90 to 150 min and was longer in the case of the unmodified sorbents. The experimental data from the study were best described by the pseudo-second-order model and the Langmuir 1 and 2 models. Amination had a very strong effect on the sorption capacity of newsprint. For example, the sorption capacity of newsprint paper towards RB5 (Qmax = 7.12 mg/g) increased after amination with ammonia, ethylenediamine, and diethylenetriamine to the value of Qmax = 182.78 mg/g, Qmax = 202.7 mg/g, and Qmax = 231.5 mg/g, respectively.

Effect of Beech Sawdust Conditions Modification on the Efficiency of the Sorption of Anionic and Cationic Dyes

The article presents studies on the effect of the modification method of beech sawdust on the sorption capacity of the anionic dye Reactive Black 5 (RB5) as well as the cationic dye Basic Violet 10 (BV10). In the studies, the pH value, the dose of sawdust activated with epichlorohydrin and the dose of ammonia were determined for the efficiency of the removal of anionic and cationic dyes. In the next phase of the study, the pH and the dose of epichlorohydrin activator on the previously activated sorbent were determined. The modification proposed in the work, which consists in the amination of sawdust in direct reaction with ammonia, increased the efficiency of the sorption of anionic dyes. This reaction increased the positive charge on the surface of the sorbent by introducing -NH2 groups, which led to an increase in the electrostatic attraction between the sorbent and the anionic dye, but to a decrease in the interaction between the sorbent and the cationic dye.

EFFECT OF IONIC AND COVALENT CROSSLINKING OF HYDROGEL CHITOSAN BEADS ON THE ADSORPTION EFFICIENCY OF BASIC VIOLET 10 AND BASIC GREEN 4 DYES FROM AQUEOUS SOLUTIONS

This work investigated the adsorption efficiency of Basic Violet 10 (BV10)and Basic Green 4 (BG4) dyes on ionically and covalently crosslinked chitosan hydrogel beads. The tested ionic crosslinkers were sodium citrate, sodium tripolyphosphate, and sulphosuccinic acid, while the covalent crosslinkers were glutaraldehyde, epichlorohydrin, and trimethylolpropane triglycidyl ether. The scope of the work included investigation of the effect of pH on the adsorption efficiency of dyes and the maximum adsorption capacity of crosslinked chitosan adsorbents. The maximum adsorption capacity of the non-crosslinked chitosan adsorbent was 2.94 mg/g and 44.32 mg/g for BV10 and BG4, respectively. Ionic crosslinking, regardless of the type of crosslinking agent, reduced the adsorption ability of hydrogel chitosan adsorbents in relation to cationic dyes (Qmax = 1.84-2.49 mg/g for BV10; 37.21-38.90 mg/g for BG4). Covalent crosslinking of chitosan slightly increased its adsorption capacity only for BV10 (Qmax = 3.59-3.81 mg/g for BV10; 39.15-40.62 mg/g for BG4).

USE OF CHITOSAN ADSORBENTS FOR DYE REMOVAL IN THE AIR-LIFT REACTOR

Adsorption tests in the air-lift reactor were carried out for six dyes – four anionic (RR11, RB5, RB8, and RR18) and two cationic (BV10 and BG 4) – as well as three adsorbents – chitosan flakes, chitosan in the form of beads, and modified sawdust immobilised in chitosan (adsorbent 3). The dye concentration in the inflow to the reactor in all the conducted test series was 10 mg/dm3; the amount of adsorbent was also constant at 10 g dry matter (d.m./dm3, and the flow rate was 0.1 V/h. For all tested dyes, the obtained maximum adsorption capacity was high and ranged from 3802 to 2203 mg/g d.m. for chitosan flakes, from 3312 to 2076 mg/g d.m. for chitosan beads, and from 2734 to 2148 mg/g d.m. for modified sawdust immobilised in chitosan. The immobilisation of sawdust on chitosan resulted in effective adsorption of both anionic and cationic dyes.