1
|
Small-pore hydridic frameworks store densely packed hydrogen. Nat Chem 2024; 16:809-816. [PMID: 38321236 PMCID: PMC11087247 DOI: 10.1038/s41557-024-01443-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/16/2021] [Accepted: 01/08/2024] [Indexed: 02/08/2024]
Abstract
Nanoporous materials have attracted great attention for gas storage, but achieving high volumetric storage capacity remains a challenge. Here, by using neutron powder diffraction, volumetric gas adsorption, inelastic neutron scattering and first-principles calculations, we investigate a magnesium borohydride framework that has small pores and a partially negatively charged non-flat interior for hydrogen and nitrogen uptake. Hydrogen and nitrogen occupy distinctly different adsorption sites in the pores, with very different limiting capacities of 2.33 H2 and 0.66 N2 per Mg(BH4)2. Molecular hydrogen is packed extremely densely, with about twice the density of liquid hydrogen (144 g H2 per litre of pore volume). We found a penta-dihydrogen cluster where H2 molecules in one position have rotational freedom, whereas H2 molecules in another position have a well-defined orientation and a directional interaction with the framework. This study reveals that densely packed hydrogen can be stabilized in small-pore materials at ambient pressures.
Collapse
|
2
|
Ionic conduction in ammonia functionalised closo-dodecaborates MB 12H 11NH 3 (M = Li and Na). Dalton Trans 2024; 53:7619-7627. [PMID: 38618973 DOI: 10.1039/d4dt00801d] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/16/2024]
Abstract
Metal hydroborates and their derivatives have been receiving attention as potential solid-state ion conductors for battery applications owing to their impressive electrochemical and mechanical characteristics. However, to date only a fraction of these compounds has been investigated as solid-state electrolytes. Here, MB12H11NH3 (M = Li and Na) hydroborates are synthesized and investigated as electrolyte materials for all-solid-state batteries. The room temperature α-NaB12H11NH3 was structurally solved in P212121 (a = 7.1972(3) Å, b = 9.9225(4) Å, and c = 14.5556(5) Å). It shows a polymorphic structural transition near 140 °C to cubic Fm3̄m. LiB12H11NH3 and NaB12H11NH3 exhibit cationic conductivities of σ(Li+) = 3.0 × 10-4 S cm-1 and σ(Na+) = 1.2 × 10-4 S cm-1 at 200 °C. Hydration is found to improve ionic conductivity of the hydroborates. It is presumed that modest ionic conductivities could be due to a lack of significant re-orientational dynamics in the crystal structure resulting from the presence of the bulky -NH3 group in the anion.
Collapse
|
3
|
Methylamine Lithium Borohydride as Electrolyte for All‐Solid‐State Batteries. Angew Chem Int Ed Engl 2022; 61:e202203484. [PMID: 35662368 PMCID: PMC9400857 DOI: 10.1002/anie.202203484] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/07/2022] [Indexed: 11/11/2022]
|
4
|
Fast magnesium ion conducting isopropylamine magnesium borohydride enhanced by hydrophobic interactions. Phys Chem Chem Phys 2022; 24:18185-18197. [PMID: 35861397 DOI: 10.1039/d1cp05063j] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
Abstract
New materials for the next generation of electrochemical energy storage devices such as batteries are of extreme importance. Here we investigate the structure, ionic conductivity and thermal properties of isopropylamine magnesium borohydride based composites with different compositions, Mg(BH4)2·x(CH3)2CHNH2, x = 0.5, 0.9, 1.25, 1.5, 1.75, 2.5, 3.1. Three new compounds are discovered, x = 1, 2, and 3 and the monoclinic structure of Mg(BH4)2·2(CH3)2CHNH2 (P21/c) is investigated in detail. This structure consists of neutral complexes [Mg(BH4)2((CH3)2CHNH2)2] di-hydrogen bonded to form layers and these layers are connected by hydrophobic interactions via the isopropyl moieties. The orthorhombic unit cell of Mg(BH4)2·(CH3)2CHNH2 was also determined, a = 9.78, b = 12.17 and c = 17.24 Å. In general, the samples are thermally stable up to 50 °C where they started to become softer, and at 70 °C isopropylamine release and melting started. The highest Mg2+ ionic conductivity was that of Mg(BH4)2·1.5(CH3)2CHNH2, σ(Mg2+) = 2.7 × 10-4 S cm-1 at 45 °C, with an activation energy of EA = 1.22 eV. Furthermore, reversible stripping/plating of Mg was displayed at 45 °C, with an oxidative stability of 1.2 V vs. Mg/Mg2+. The addition of MgO nanoparticles (75 wt%) improves the mechanical and thermal stability, and decreases the activation energy, to EA = 0.56 eV. Thereby the Mg2+ conductivity is increased at low temperature. This suggests that the hydrophobic interactions contribute to the high ionic conductivity in the solid state, which opens a new avenue for design and discovery of electrolyte materials.
Collapse
|
5
|
Methylamine Lithium Borohydride as Electrolyte for All‐Solid‐State Batteries. Angew Chem Int Ed Engl 2022. [DOI: 10.1002/ange.202203484] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
|
6
|
Abstract
Design of new functional materials with fast Mg-ion mobility is crucial for the development of competitive solid-state magnesium batteries. Herein, we present new nanocomposites, Mg(BH4)2·1.6NH3-Al2O3, reaching a high magnesium conductivity of σ(Mg2+) = 2.5 × 10-5 S cm-1 at 22 °C assigned to favorable interfaces between amorphous state Mg(BH4)2·1.6NH3; inert and insulating Al2O3 nanoparticles; and a minor fraction of crystalline material, mainly Mg(BH4)2·2NH3. Furthermore, quasi-elastic neutron scattering reveals that the Mg2+-ion mobility in the solid state appears to be correlated to relatively slow motion of NH3 molecules rather than the fast dynamics of BH4- complexes. The nanocomposite is compatible with a metallic Mg anode and shows stable Mg2+ stripping/plating in a symmetric cell and an electrochemical stability of ∼1.2 V. The nanocomposite has high mechanical stability and ductility and is a promising Mg2+ electrolyte for future solid-state magnesium batteries.
Collapse
|
7
|
Polymorphism of Calcium Decahydrido- closo-decaborate and Characterization of Its Hydrates. Inorg Chem 2021; 60:10943-10957. [PMID: 34251804 DOI: 10.1021/acs.inorgchem.1c00594] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Metal closo-borates and their derivatives have shown promise in several fields of application from cancer therapy to solid-state electrolytes partly owing to their stability in aqueous solutions and high thermal stability. We report the synthesis and structural analysis of α- and β-CaB10H10, which are structurally and energetically similar, both showing a tetrahedral coordination of Ca2+ to four closo-borate cages. The main distinctions between the α- and β-polymorph are found in the crystal system (monoclinic or orthorhombic), topology (wurtzite or cag), and the degree of displacement of Ca2+ from the center of the coordination tetrahedron. Neutron vibrational spectroscopy measurements further revealed distinct perturbations in the cation-anion interactions arising from the different crystal structures. We also synthesized and structurally investigated five stoichiometric hydrates, CaB10H10·xH2O, x = 1, 4, 5, 6, and 7, and discovered an order-disorder polymorphic transition, α- to β-CaB10H10·6H2O. The hydrates reveal a rich structural diversity with ordered structures, CaB10H10·xH2O, x = 1, 4, 5, 6, and 7, as well as disordered structures, x = 6 and 8. The latter allow for a continuum of compositions within 7-8 molecules of crystal water. The DFT-optimized experimental crystal structures reveal complex networks of three types of hydrogen interactions: dihydrogen bonds, B-Hδ-···+δH-O; hydrogen-hydrogen interactions, B-H···H-B; and hydrogen bonds, O-Hδ+···-δO-H. A rather short B-H···H-B (2.14 Å) interaction is observed for CaB10H10·5H2O, which is locally stabilized by four hydrogen bonds.
Collapse
|
8
|
Synthesis and crystal structures of decahydro-closo-decaborates of the divalent cations of strontium and manganese. J SOLID STATE CHEM 2021. [DOI: 10.1016/j.jssc.2021.122133] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
9
|
Iodine-Substituted Lithium/Sodium closo-Decaborates: Syntheses, Characterization, and Solid-State Ionic Conductivity. ACS APPLIED MATERIALS & INTERFACES 2021; 13:17554-17564. [PMID: 33821603 DOI: 10.1021/acsami.1c01659] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Solid-state electrolytes based on closo-decaborates have caught increasing interest owing to the impressive room-temperature ionic conductivity, remarkable thermal/chemical stability, and excellent deformability. In order to develop new solid-state ion conductors, we investigated the influence of iodine substitution on the thermal, structural, and ionic conduction properties of closo-decaborates. A series of iodinated closo-decaborates, M2[B10H10-nIn] (M = Li, Na; n = 1, 2, 10), were synthesized and characterized by thermal analysis, powder X-ray diffraction, and electrochemical impedance spectroscopy; the stability and ionic conductivity of these compounds were studied. It was found that with the increase of iodine substitution on the closo-decaborate anion cage, the thermal decomposition temperature increases. All M2[B10H10-nIn] exhibit an amorphous structure. The ionic conductivity of Li2[B10H10-nIn] is higher than that of the Li2[B10H10] parent compound. An ionic conductivity of 2.96 × 10-2 S cm-1 with an activation energy of 0.23 eV was observed for Li2[B10I10] at 300 °C, implying that iodine substitution can improve the ionic conductivity. However, the ionic conductivity of Na2[B10H10-nIn] is lower than that of Na2[B10H10] and increases with the increase of iodine substitution, which could be associated with the increase of the electrostatic potential, mass, and volume of the iodinated anions. Moreover, Li2[B10I10] offers a Li-ion transference number of 0.999, an electrochemical stability window of 3.3 V and good compatibility with the Li anode, demonstrating its potential for application in high-temperature batteries.
Collapse
|
10
|
Trends in the Series of Ammine Rare-Earth-Metal Borohydrides: Relating Structural and Thermal Properties. Inorg Chem 2021; 60:2573-2589. [PMID: 33499595 DOI: 10.1021/acs.inorgchem.0c03464] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Ammine metal borohydrides display extreme structural and compositional diversity and show potential applications for solid-state hydrogen and ammonia storage and as solid-state electrolytes. Thirty-two new compounds are reported in this work, and trends in the full series of ammine rare-earth-metal borohydrides are discussed. The majority of the rare-earth metals (RE) form trivalent RE(BH4)3·xNH3 (x = 7-1) compounds, which possess an intriguing crystal chemistry changing with the number of ammonia ligands, varying from structures built from complex ions (x = 5-7), to molecular structures (x = 3, 4), one-dimensional chains (x = 2), and structures built from two-dimensional layers (x = 1). Divalent RE(BH4)2·xNH3 (x = 4, 2, 1) compounds are observed for RE2+ = Sm, Eu, Yb, with structures varying from molecular structures (x = 4) to two-dimensional layered (x = 2, 1) and three-dimensional structures (Yb(BH4)2·NH3). The crystal structure and composition of the compounds depend on the volume of the rare-earth ion. In all structures, NH3 coordinates to the metal, while BH4- has a more flexible coordination and is observed as a bridging and terminal ligand and as a counterion. RE(BH4)3·xNH3 (x = 7-5, 4) releases NH3 stepwise during thermal treatment, while mainly H2 is released for x ≤ 3. In contrast, only NH3 is released from RE(BH4)2·xNH3 due to the lower charge density on the RE2+ ion and higher stability of RE(BH4)2. The thermal stability of RE(BH4)3·xNH3 increase with increasing cation charge density for x = 5, 7, while it decreases for x = 4, 6. For x = 3, the thermal stability decreases with increasing charge density, due to the destabilization of the BH4- group, making it more reactive toward NH3. This research provides a large number of novel compounds and new insight into trends in the crystal chemistry of ammine metal borohydrides and reveals a correlation between the local metal coordination and the thermal stability.
Collapse
|
11
|
Interface controlled solid-state lithium storage performance in free-standing bismuth nanosheets. Dalton Trans 2021; 50:252-261. [PMID: 33295901 DOI: 10.1039/d0dt03613g] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Bismuth (Bi) has recently been discovered as a potential lithium-ion anode material for batteries with high Li capacity and suitable equilibrium potential, and without dendrite formation. However, the reversible electrochemical stability remains insufficient for applications. Herein, it is demonstrated that two-dimensional free-standing Bi nanosheets (Bi-NSs) have superior anode performance using either liquid or solid electrolytes. The Bi-NSs with a uniform thickness of ∼40 nm prepared by aqueous methods exhibit a record high capacity of ∼287 mA h g-1 at a current density of 250 mA g-1 with the LiBH4 solid electrolyte even after 100 cycles. Fast and stable solid-state lithium plating and stripping occur without side reactions. The 2D layered nanostructure has more active sites and a shorter diffusion length, and forms stable interfaces with the electrolyte. The present work reveals a facile synthesis route of novel 2D materials and paves an efficient pathway for high-capacity and safe bismuth-based anodes for lithium batteries.
Collapse
|
12
|
Neutron Scattering Investigations of the Global and Local Structures of Ammine Yttrium Borohydrides. THE JOURNAL OF PHYSICAL CHEMISTRY. C, NANOMATERIALS AND INTERFACES 2021; 125:10.1021/acs.jpcc.1c03629. [PMID: 38487813 PMCID: PMC10938370 DOI: 10.1021/acs.jpcc.1c03629] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 03/17/2024]
Abstract
Complex metal hydrides are a fascinating and continuously expanding class of materials with many properties relevant for solid-state hydrogen and ammonia storage and solid-state electrolytes. The crystal structures are often investigated using powder X-ray diffraction (PXD), which can be ambiguous. Here, we revisit the crystal structure of Y(11BD4)3·3ND3 with the use of neutron diffraction, which, in comparison to previous PXD studies, provides accurate information about the D positions in the compound. Upon cooling to 10 K, the compound underwent a polymorphic transition, and a new monoclinic low-temperature polymorph denoted as α-Y(11BD4)3·3ND3 was discovered. Furthermore, the series of Y(11BH4)3·xNH3 (x = 0, 3, and 7) were also investigated with inelastic neutron scattering and infrared spectroscopy techniques, which provided information of the local coordination environment of the 11BH4- and NH3 groups and unique insights into the hydrogen dynamics. Partial deuteration using ND3 in Y(11BH4)3·xND3 (x = 3 and 7) allowed for an unambiguous assignment of the vibrational bands corresponding to the NH3 and 11BH4- in Y(11BH4)3·xNH3, due to the much larger neutron scattering cross section of H compared to D. The vibrational spectra of Y(11BH4)3·xNH3 could roughly be divided into three regions: (i) below 55 meV, containing mainly 11BH4- librational motions, (ii) 55-130 meV, containing mainly NH3 librational motions, and (iii) above 130 meV, containing 11B-H and N-H bending and stretching motions.
Collapse
|
13
|
Nanoconfinement of Molecular Magnesium Borohydride Captured in a Bipyridine-Functionalized Metal-Organic Framework. ACS NANO 2020; 14:10294-10304. [PMID: 32658451 DOI: 10.1021/acsnano.0c03764] [Citation(s) in RCA: 19] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
The lower limit of metal hydride nanoconfinement is demonstrated through the coordination of a molecular hydride species to binding sites inside the pores of a metal-organic framework (MOF). Magnesium borohydride, which has a high hydrogen capacity, is incorporated into the pores of UiO-67bpy (Zr6O4(OH)4(bpydc)6 with bpydc2- = 2,2'-bipyridine-5,5'-dicarboxylate) by solvent impregnation. The MOF retained its long-range order, and transmission electron microscopy and elemental mapping confirmed the retention of the crystal morphology and revealed a homogeneous distribution of the hydride within the MOF host. Notably, the B-, N-, and Mg-edge XAS data confirm the coordination of Mg(II) to the N atoms of the chelating bipyridine groups. In situ 11B MAS NMR studies helped elucidate the reaction mechanism and revealed that complete hydrogen release from Mg(BH4)2 occurs as low as 200 °C. Sieverts and thermogravimetric measurements indicate an increase in the rate of hydrogen release, with the onset of hydrogen desorption as low as 120 °C, which is approximately 150 °C lower than that of the bulk material. Furthermore, density functional theory calculations support the improved dehydrogenation properties and confirm the drastically lower activation energy for B-H bond dissociation.
Collapse
|
14
|
Structural Diversity and Trends in Properties of an Array of Hydrogen-Rich Ammonium Metal Borohydrides. Inorg Chem 2020; 59:12733-12747. [PMID: 32799455 DOI: 10.1021/acs.inorgchem.0c01797] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
Metal borohydrides are a fascinating and continuously expanding class of materials, showing promising applications within many different fields of research. This study presents 17 derivatives of the hydrogen-rich ammonium borohydride, NH4BH4, which all exhibit high gravimetric hydrogen densities (>9.2 wt % of H2). A detailed insight into the crystal structures combining X-ray diffraction and density functional theory calculations exposes an intriguing structural variety ranging from three-dimensional (3D) frameworks, 2D-layered, and 1D-chainlike structures to structures built from isolated complex anions, in all cases containing NH4+ countercations. Dihydrogen interactions between complex NH4+ and BH4- ions contribute to the structural diversity and flexibility, while inducing an inherent instability facilitating hydrogen release. The thermal stability of the ammonium metal borohydrides, as a function of a range of structural properties, is analyzed in detail. The Pauling electronegativity of the metal, the structural dimensionality, the dihydrogen bond length, the relative amount of NH4+ to BH4-, and the nearest coordination sphere of NH4+ are among the most important factors. Hydrogen release usually occurs in three steps, involving new intermediate compounds, observed as crystalline, polymeric, and amorphous materials. This research provides new opportunities for the design and tailoring of novel functional materials with interesting properties.
Collapse
|
15
|
Ammonium–Ammonia Complexes, N2H7+, in Ammonium closo-Borate Ammines: Synthesis, Structure, and Properties. Inorg Chem 2020; 59:11449-11458. [DOI: 10.1021/acs.inorgchem.0c01257] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/25/2023]
|
16
|
Ammine Lanthanum and Cerium Borohydrides, M(BH4)3·nNH3; Trends in Synthesis, Structures, and Thermal Properties. Inorg Chem 2020; 59:7768-7778. [DOI: 10.1021/acs.inorgchem.0c00817] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
17
|
Ammonia-assisted fast Li-ion conductivity in a new hemiammine lithium borohydride, LiBH 4·1/2NH 3. Chem Commun (Camb) 2020; 56:3971-3974. [PMID: 32152608 DOI: 10.1039/c9cc09990e] [Citation(s) in RCA: 42] [Impact Index Per Article: 10.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Hemiammine lithium borohydride, LiBH4·1/2NH3, is characterized and a new Li+ conductivity mechanism is identified. It exhibits a Li+ conductivity of 7 × 10-4 S cm-1 at 40 °C in the solid state and 3.0 × 10-2 S cm-1 at 55 °C after melting. The molten state of LiBH4·1/2NH3 has a high viscosity and can be mechanically stabilized in nano-composites with inert metal oxides and other hydrides making it a promising battery electrolyte.
Collapse
|
18
|
The mechanism of Mg2+ conduction in ammine magnesium borohydride promoted by a neutral molecule. Phys Chem Chem Phys 2020; 22:9204-9209. [DOI: 10.1039/d0cp00158a] [Citation(s) in RCA: 48] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Light weight and cheap electrolytes with fast multi-valent ion conductivity can pave the way for future high-energy density solid-state batteries, beyond the lithium-ion battery.
Collapse
|
19
|
Quantitative Delta T1 (dT1) as a Replacement for Adjudicated Central Reader Analysis of Contrast-Enhancing Tumor Burden: A Subanalysis of the American College of Radiology Imaging Network 6677/Radiation Therapy Oncology Group 0625 Multicenter Brain Tumor Trial. AJNR Am J Neuroradiol 2019; 40:1132-1139. [PMID: 31248863 DOI: 10.3174/ajnr.a6110] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/28/2019] [Accepted: 05/08/2019] [Indexed: 01/08/2023]
Abstract
BACKGROUND AND PURPOSE Brain tumor clinical trials requiring solid tumor assessment typically rely on the 2D manual delineation of enhancing tumors by ≥2 expert readers, a time-consuming step with poor interreader agreement. As a solution, we developed quantitative dT1 maps for the delineation of enhancing lesions. This retrospective analysis compares dT1 with 2D manual delineation of enhancing tumors acquired at 2 time points during the post therapeutic surveillance period of the American College of Radiology Imaging Network 6677/Radiation Therapy Oncology Group 0625 (ACRIN 6677/RTOG 0625) clinical trial. MATERIALS AND METHODS Patients enrolled in ACRIN 6677/RTOG 0625, a multicenter, randomized Phase II trial of bevacizumab in recurrent glioblastoma, underwent standard MR imaging before and after treatment initiation. For 123 patients from 23 institutions, both 2D manual delineation of enhancing tumors and dT1 datasets were evaluable at weeks 8 (n = 74) and 16 (n = 57). Using dT1, we assessed the radiologic response and progression at each time point. Percentage agreement with adjudicated 2D manual delineation of enhancing tumor reads and association between progression status and overall survival were determined. RESULTS For identification of progression, dT1 and adjudicated 2D manual delineation of enhancing tumor reads were in perfect agreement at week 8, with 73.7% agreement at week 16. Both methods showed significant differences in overall survival at each time point. When nonprogressors were further divided into responders versus nonresponders/nonprogressors, the agreement decreased to 70.3% and 52.6%, yet dT1 showed a significant difference in overall survival at week 8 (P = .01), suggesting that dT1 may provide greater sensitivity for stratifying subpopulations. CONCLUSIONS This study shows that dT1 can predict early progression comparable with the standard method but offers the potential for substantial time and cost savings for clinical trials.
Collapse
|
20
|
Trends in Synthesis, Crystal Structure, and Thermal and Magnetic Properties of Rare-Earth Metal Borohydrides. Inorg Chem 2019; 58:5503-5517. [PMID: 31013080 DOI: 10.1021/acs.inorgchem.8b03258] [Citation(s) in RCA: 27] [Impact Index Per Article: 5.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Synthesis, crystal structures, and thermal and magnetic properties of the complete series of halide-free rare-earth (RE) metal borohydrides are presented. A new synthesis method provides high yield and high purity products. Fifteen new metal borohydride structures are reported. The trends in crystal structures, thermal behavior, and magnetic properties for the entire series of RE(BH4) x are compared and discussed. The RE(BH4) x possess a very rich crystal chemistry, dependent on the oxidation state and the ionic size of the rare-earth ion. Due to the lanthanide contraction, there is a significant decrease in the volume of the RE3+-ion with increasing atomic number, which correlates linearly with the unit cell volume of the α- and β-RE(BH4)3 polymorphs and the solvated complexes α-RE(BH4)3·S(CH3)2. The thermal analysis reveals a one-step decomposition pathway in the temperature range from 247 to 277 °C for all RE(BH4)3 except Lu(BH4)3, which follows a three-step decomposition pathway. In contrast, the RE(BH4)2 decompose at higher temperatures in the range 306 to 390 °C due to lower charge density on the rare-earth ion. The RE(BH4)3 show increasing stability with increasing Pauling electronegativity, which contradicts other main group and transition metal borohydrides. The majority of the compounds follow Curie-Weiss paramagnetic behavior down to 3 K with weak antiferromagnetic interactions and magnetic moments in accord with those of isolated 4f ions. Some of the RE(BH4) x display varying degrees of temperature-dependent magnetic moments due to low-lying excited stated induced by crystal field effects. Additionally, a weak antiferromagnetic ordering is observed in Gd(BH4)3, indicating superexchange through a borohydride group.
Collapse
|
21
|
Abstract
Altering the decomposition pathway of potassium alanate, KAlH4, with aluminium sulfide, Al2S3, presents a new opportunity to release all of the hydrogen, increase the volumetric hydrogen capacity and avoid complications associated with the formation of KH and molten K. Decomposition of 6KAlH4-Al2S3 during heating under dynamic vacuum began at 185 °C, 65 °C lower than for pure KAlH4, and released 71% of the theoretical hydrogen content below 300 °C via several unknown compounds. The major hydrogen release event, centred at 276 °C, was associated with two new compounds indexed with monoclinic (a = 10.505, b = 7.492, c = 11.772 Å, β = 122.88°) and hexagonal (a = 10.079, c = 7.429 Å) unit cells, respectively. Unlike the 6NaAlH4-Al2S3 system, the 6KAlH4-Al2S3 system did not have M3AlH6 (M = alkali metal) as one of the intermediate decomposition products nor were the final products M2S and Al observed. Decomposition performed under hydrogen pressure initially followed a similar reaction pathway to that observed during heating under vacuum but resulted in partial melting of the sample between 300 and 350 °C. The measured enthalpy of hydrogen absorption (ΔHabs) was in the range -44.5 to -51.1 kJ mol-1 H2, which is favourable for moderate temperature hydrogen applications. Although, the hydrogen capacity decreases during consecutive H2 release and uptake cycles, the presence of excess amounts of aluminium allow for further optimisation of hydrogen storage properties.
Collapse
|
22
|
|
23
|
The interconversion between THF·B 3H 7 and B 3H 8-: an efficient synthetic method for MB 3H 8 (M = Li and Na). Dalton Trans 2019; 48:5140-5143. [PMID: 30916702 DOI: 10.1039/c9dt00843h] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
An efficient synthetic method for MB3H8 (M = Li and Na) has been developed with improved yields on the basis of the investigation of the interconversion between THF·B3H7 and corresponding MB3H8. The mechanism was tentatively proposed based on the understanding of the nucleophilicity of the B-H bonding pair electrons.
Collapse
|
24
|
Abstract
Li2B12H12 is reported in the molten state for the first time, which enables a range of new research opportunities.
Collapse
|
25
|
Potassium octahydridotriborate: diverse polymorphism in a potential hydrogen storage material and potassium ion conductor. Dalton Trans 2019; 48:8872-8881. [DOI: 10.1039/c9dt00742c] [Citation(s) in RCA: 28] [Impact Index Per Article: 5.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Hydrogen storage properties and polymorphism in KB3H8. The order–disorder polymorphic transition results in disordered B3H8− anions, facilitating cation mobility.
Collapse
|
26
|
Abstract
Commencing from metal hydrides, versatile synthesis, purification, and desolvation approaches are presented for a wide range of metal borohydrides and their solvates. An optimized and generalized synthesis method is provided for 11 different metal borohydrides, M(BH4) n, (M = Li, Na, Mg, Ca, Sr, Ba, Y, Nd, Sm, Gd, Yb), providing controlled access to more than 15 different polymorphs and in excess of 20 metal borohydride solvate complexes. Commercially unavailable metal hydrides (MH n, M = Sr, Ba, Y, Nd, Sm, Gd, Yb) are synthesized utilizing high pressure hydrogenation. For synthesis of metal borohydrides, all hydrides are mechanochemically activated prior to reaction with dimethylsulfide borane. A purification process is devised, alongside a complementary desolvation process for solvate complexes, yielding high purity products. An array of polymorphically pure metal borohydrides are synthesized in this manner, supporting the general applicability of this method. Additionally, new metal borohydrides, α-, α'- β-, γ-Yb(BH4)2, α-Nd(BH4)3 and new solvates Sr(BH4)2·1THF, Sm(BH4)2·1THF, Yb(BH4)2· xTHF, x = 1 or 2, Nd(BH4)3·1Me2S, Nd(BH4)3·1.5THF, Sm(BH4)3·1.5THF and Yb(BH4)3· xMe2S (" x" = unspecified), are presented here. Synthesis conditions are optimized individually for each metal, providing insight into reactivity and mechanistic concerns. The reaction follows a nucleophilic addition/hydride-transfer mechanism. Therefore, the reaction is most efficient for ionic and polar-covalent metal hydrides. The presented synthetic approaches are widely applicable, as demonstrated by permitting facile access to a large number of materials and by performing a scale-up synthesis of LiBH4.
Collapse
|
27
|
Synthesis, structure, and polymorphic transitions of praseodymium(iii) and neodymium(iii) borohydride, Pr(BH 4) 3 and Nd(BH 4) 3. Dalton Trans 2018; 47:8307-8319. [PMID: 29892753 DOI: 10.1039/c8dt00118a] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
Abstract
In this work, praseodymium(iii) borohydride, Pr(BH4)3, and an isotopically enriched analogue, Pr(11BD4)3, are prepared by a new route via a solvate complex, Pr(11BD4)3S(CH3)2. Nd(BH4)3 was synthesized using the same method and the structures, polymorphic transformations, and thermal stabilities of these compounds are investigated in detail. α-Pr(BH4)3 and α-Nd(BH4)3 are isostructural with cubic unit cells (Pa3[combining macron]) stable at room temperature (RT) and a unit cell volume per formula unit (V/Z) of 180.1 and 175.8 Å3, respectively. Heating α-Pr(BH4)3 to T ∼ 190 °C, p(Ar) = 1 bar, introduces a transition to a rhombohedral polymorph, r-Pr(BH4)3 (R3[combining macron]c) with a smaller unit cell volume and a denser structure, V/Z = 156.06 Å3. A similar transition was not observed for Nd(BH4)3. However, heat treatment of α-Pr(BH4)3, at T ∼ 190 °C, p(H2) = 40 bar and α-Nd(BH4)3, at T ∼ 270 °C, p(H2) = 98 bar facilitates reversible formation of another three cubic polymorph, denoted as β, β' and β''-RE(BH4)3 (Fm3[combining macron]c). Moreover, the transition β- to β'- to β''- is considered a rare example of stepwise negative thermal expansion. For Pr(BH4)3, ∼2/3 of the sample takes this route of transformation whereas in argon only ∼5 wt%, and the remaining transforms directly from α- to r-Pr(BH4)3. The β-polymorphs are porous with V/Z = 172.4 and 172.7 Å3 for β''-RE(BH4)3, RE = Pr or Nd, respectively, and are stabilized by the elevated hydrogen pressures. The polymorphic transitions occur due to rotation of RE(BH4)6 octahedra without breaking or forming chemical bonds. Structural DFT optimization reveals the decreasing stability of α-Pr(BH4)3 > β-Pr(BH4)3 > r-Pr(BH4)3.
Collapse
|
28
|
Synthesis, structure and properties of bimetallic sodium rare-earth (RE) borohydrides, NaRE(BH 4) 4, RE = Ce, Pr, Er or Gd. Dalton Trans 2018; 46:13421-13431. [PMID: 28948259 DOI: 10.1039/c7dt02536j] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Formation, stability and properties of new metal borohydrides within RE(BH4)3-NaBH4, RE = Ce, Pr, Er or Gd is investigated. Three new bimetallic sodium rare-earth borohydrides, NaCe(BH4)4, NaPr(BH4)4 and NaEr(BH4)4 are formed based on an addition reaction between NaBH4 and halide free rare-earth metal borohydrides RE(BH4)3, RE = Ce, Pr, Er. All the new compounds crystallize in the orthorhombic crystal system. NaCe(BH4)4 has unit cell parameters of a = 6.8028(5), b = 17.5181(13), c = 7.2841(5) Å and space group Pbcn. NaPr(BH4)4 is isostructural to NaCe(BH4)4 with unit cell parameters of a = 6.7617(2), b = 17.4678(7), c = 7.2522(3) Å. NaEr(BH4)4 crystallizes in space group Cmcm with unit cell parameters of a = 8.5379(2), b = 12.1570(4), c = 9.1652(3) Å. The structural relationships, also to the known RE(BH4)3, are discussed in detail and related to the stability and synthesis conditions. Heat treatment of NaBH4-Gd(BH4)3 mixture forms an unstable amorphous phase, which decomposes after one day at RT. NaCe(BH4)4 and NaPr(BH4)4 show reversible hydrogen storage capacity of 1.65 and 1.04 wt% in the fourth H2 release, whereas that of NaEr(BH4)4 continuously decreases. This is mainly assigned to formation of metal hydrides and possibly slower formation of sodium borohydride. The dehydrogenated state clearly contains rare-earth metal borides, which stabilize boron in the dehydrogenated state.
Collapse
|
29
|
Abstract
Fluoride substitution in LiBH4 is studied by investigation of LiBH4-LiBF4 mixtures (9 : 1 and 3 : 1). Decomposition was followed by in situ synchrotron radiation X-ray diffraction (in situ SR-PXD), thermogravimetric analysis and differential scanning calorimetry with gas analysis (TGA/DSC-MS) and in situ infrared spectroscopy (in situ FTIR). Upon heating, fluoride substituted LiBH4 forms (LiBH4-xFx) and decomposition occurs, releasing diborane and solid decomposition products. The decomposition temperature is reduced more than fourfold relative to the individual constituents, with decomposition commencing at T = 80 °C. The degree of fluoride substitution is quantified by sequential Rietveld refinement and shows a selective manner of substitution. In situ FTIR experiments reveal formation of bands originating from LiBH4-xFx. Formation of LiF and observation of diborane release implies that the decomposing materials have a composition that facilitates formation of diborane and LiF, i.e. LiBH4-xFx (LiBH3F). An alternative approach for fluoride substitution was performed, by addition of Et3N·3HF to LiBH4, yielding extremely unstable products. Spontaneous decomposition indicates fluoride substitution to have occurred. From our point of view, this is the most significant destabilization effect seen for borohydride materials so far.
Collapse
|
30
|
Hydrogenation properties of lithium and sodium hydride – closo-borate, [B10H10]2− and [B12H12]2−, composites. Phys Chem Chem Phys 2018; 20:16266-16275. [DOI: 10.1039/c7cp07776a] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Abstract
The hydrogen absorption properties of metal closo-borate/metal hydride composites are studied under high hydrogen pressures.
Collapse
|
31
|
Disorder induced polymorphic transitions in the high hydrogen density compound Sr(BH4)2(NH3BH3)2. Dalton Trans 2018; 47:16737-16746. [DOI: 10.1039/c8dt03654c] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
The presence of two stable configurations of the ammonia borane molecule at elevated temperature induces a polymorphic phase transition to lower symmetry.
Collapse
|
32
|
Nanoconfined NaAlH 4 Conversion Electrodes for Li Batteries. ACS OMEGA 2017; 2:1956-1967. [PMID: 31457554 PMCID: PMC6641067 DOI: 10.1021/acsomega.7b00143] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/08/2017] [Accepted: 04/26/2017] [Indexed: 05/05/2023]
Abstract
In the past, sodium alanate, NaAlH4, has been widely investigated for its capability to store hydrogen, and its potential for improving storage properties through nanoconfinement in carbon scaffolds has been extensively studied. NaAlH4 has recently been considered for Li-ion storage as a conversion-type anode in Li-ion batteries. Here, NaAlH4 nanoconfined in carbon scaffolds as an anode material for Li-ion batteries is reported for the first time. Nanoconfined NaAlH4 was prepared by melt infiltration into mesoporous carbon scaffolds. In the first cycle, the electrochemical reversibility of nanoconfined NaAlH4 was improved from around 30 to 70% compared to that of nonconfined NaAlH4. Cyclic voltammetry revealed that nanoconfinement alters the conversion pathway, and operando powder X-ray diffraction showed that the conversion from NaAlH4 into Na3AlH6 is favored over the formation of LiNa2AlH6. The electrochemical reactivity of the carbon scaffolds has also been investigated to study their contribution to the overall capacity of the electrodes.
Collapse
|
33
|
Accelerated anaerobic hydrolysis rates under a combination of intermittent aeration and anaerobic conditions. WATER SCIENCE AND TECHNOLOGY : A JOURNAL OF THE INTERNATIONAL ASSOCIATION ON WATER POLLUTION RESEARCH 2017; 75:1944-1951. [PMID: 28452786 DOI: 10.2166/wst.2017.085] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
Anaerobic hydrolysis in activated return sludge was investigated in laboratory scale experiments to find if intermittent aeration would accelerate anaerobic hydrolysis rates compared to anaerobic hydrolysis rates under strict anaerobic conditions. The intermittent reactors were set up in a 240 h experiment with intermittent aeration (3 h:3 h) in a period of 24 h followed by a subsequent anaerobic period of 24 h in a cycle of 48 h which was repeated five times during the experiment. The anaerobic reactors were kept under strict anaerobic conditions in the same period (240 h). Two methods for calculating hydrolysis rates based on soluble chemical oxygen demand were compared. Two-way analysis of variance with the Bonferroni post-test was performed in order to register any significant difference between reactors with intermittent aeration and strictly anaerobic conditions respectively. The experiment demonstrated a statistically significant difference in favor of the reactors with intermittent aeration showing a tendency towards accelerated anaerobic hydrolysis rates due to application of intermittent aeration. The conclusion of the work is thus that intermittent aeration applied in the activated return sludge process can improve the treatment capacity further in full scale applications.
Collapse
|
34
|
Abstract
A comprehensive review of metal borohydrides from synthesis to application.
Collapse
|
35
|
Abstract
The LiBH4–NaBH4–KBH4 system was explored combining experimental and theoretical techniques to establish phase diagrams and thermodynamic properties in all temperature and composition ranges.
Collapse
|
36
|
Perovskite alkali metal samarium borohydrides: crystal structures and thermal decomposition. Dalton Trans 2017; 46:11905-11912. [DOI: 10.1039/c7dt02405c] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Synthesis and characterisation of samarium containing perovskite-type bimetallic borohydrides for hydrogen storage.
Collapse
|
37
|
Synthesis, structures and thermal decomposition of ammine MxB12H12complexes (M = Li, Na, Ca). Dalton Trans 2017; 46:7770-7781. [DOI: 10.1039/c7dt01414g] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
This work presents the structural and thermal properties of ammine metal dodecahydro-closo-dodecaboranes and their reversible ammonia (or hydrogen) storage.
Collapse
|
38
|
The influence of LiH on the rehydrogenation behavior of halide free rare earth (RE) borohydrides (RE = Pr, Er). Phys Chem Chem Phys 2016; 18:24387-95. [PMID: 27533740 DOI: 10.1039/c6cp04523e] [Citation(s) in RCA: 25] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Rare earth (RE) metal borohydrides are receiving immense consideration as possible hydrogen storage materials and solid-state Li-ion conductors. In this study, halide free Er(BH4)3 and Pr(BH4)3 have been successfully synthesized for the first time by the combination of mechanochemical milling and/or wet chemistry. Rietveld refinement of Er(BH4)3 confirmed the formation of two different Er(BH4)3 polymorphs: α-Er(BH4)3 with space group Pa3[combining macron], a = 10.76796(5) Å, and β-Er(BH4)3 in Pm3[combining macron]m with a = 5.4664(1) Å. A variety of Pr(BH4)3 phases were found after extraction with diethyl ether: α-Pr(BH4)3 in Pa3[combining macron] with a = 11.2465(1) Å, β-Pr(BH4)3 in Pm3[combining macron]m with a = 5.716(2) Å and LiPr(BH4)3Cl in I4[combining macron]3m, a = 11.5468(3) Å. Almost phase pure α-Pr(BH4)3 in Pa3[combining macron] with a = 11.2473(2) Å was also synthesized. The thermal decomposition of Er(BH4)3 and Pr(BH4)3 proceeded without the formation of crystalline products. Rehydrogenation, as such, was not successful. However, addition of LiH promoted the rehydrogenation of RE hydride phases and LiBH4 from the decomposed RE(BH4)3 samples.
Collapse
|
39
|
From M(BH 4) 3 (M = La, Ce) Borohydride Frameworks to Controllable Synthesis of Porous Hydrides and Ion Conductors. Inorg Chem 2016; 55:9748-9756. [PMID: 27622390 DOI: 10.1021/acs.inorgchem.6b01526] [Citation(s) in RCA: 30] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Rare earth metal borohydrides show a number of interesting properties, e.g., Li ion conductivity and luminescence, and the series of materials is well explored. However, previous attempts to obtain M(BH4)3 (M = La, Ce) by reacting MCl3 and LiBH4 yielded LiM(BH4)3Cl. Here, a synthetic approach is presented, which allows the isolation of M(BH4)3 (M = La, Ce) via formation of intermediate complexes with dimethyl sulfide. The cubic c-Ce(BH4)3 (Fm3̅c) is isostructural to high-temperature polymorphs of A(BH4)3 (A = Y, Sm, Er, Yb) borohydrides. The larger size of the Ce3+ ion makes the empty void in the open ReO3-type framework structure potentially accessible to small guest molecules like H2. Another new rhombohedral polymorph, r-M(BH4)3 (M = La, Ce), is a closed form of the framework, prone to stacking faults. The new compounds M(BH4)3 (M = La, Ce) can be combined with LiCl in an addition reaction to form LiM(BH4)3Cl also known as Li4[M4(BH4)12Cl4]; the latter contains the unique tetranuclear cluster [M4(BH4)12Cl4]4- and shows high Li-ion conductivity. This reaction pathway opens a way to synthesize a series of A4[M4(BH4)12X4] (M = La, Ce) compounds with different anions (X) and metal ions (A) and potentially high ion conductivity.
Collapse
|
40
|
|
41
|
Synthesis, Structures and Dehydrogenation Properties of Zinc Borohydride Ethylenediamine Complexes. ChemistrySelect 2016. [DOI: 10.1002/slct.201600077] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
|
42
|
Synthesis and decomposition of Li3Na(NH2)4 and investigations of Li-Na-N-H based systems for hydrogen storage. Phys Chem Chem Phys 2016; 18:1735-42. [PMID: 26672440 DOI: 10.1039/c5cp06719g] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Previous studies have shown modified thermodynamics of amide-hydride composites by cation substitution, while this work systematically investigates lithium-sodium-amide, Li-Na-N-H, based systems. Li3Na(NH2)4 has been synthesized by combined ball milling and annealing of 3LiNH2-NaNH2 with LiNa2(NH2)3 as a minor by-product. Li3+xNa1-x(NH2)4 releases NaNH2 and forms non-stoichiometric Li3+xNa1-x(NH2)4 before it melts at 234 °C, as observed by in situ powder X-ray diffraction. Above 234 °C, Li3+xNa1-x(NH2)4 releases a mixture of NH3, N2 and H2 while a bi-metallic lithium sodium imide is not observed during decomposition. Hydrogen storage performances have been investigated for the composites Li3Na(NH2)4-4LiH, LiNH2-NaH and NaNH2-LiH. Li3Na(NH2)4-4LiH converts into 4LiNH2-NaH-3LiH during mechanochemical treatment and releases 4.2 wt% of H2 in multiple steps between 25 and 340 °C as revealed by Sievert's measurements. All three investigated composites have a lower peak temperature for H2 release as compared to LiNH2-LiH, possibly owing to modified kinetics and thermodynamics, due to the formation of Li3Na(NH2)4 and LiNa2(NH2)3.
Collapse
|
43
|
Metal borohydride formation from aluminium boride and metal hydrides. Phys Chem Chem Phys 2016; 18:27545-27553. [DOI: 10.1039/c6cp05391b] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/06/2023]
Abstract
Formation and quantification of metal borohydrides at high pressure, p(H2) = 600 bar, and elevated temperature from AlB2-MHx (M = Li, Na, Mg, Ca) composites.
Collapse
|
44
|
Destabilization of lithium hydride and the thermodynamic assessment of the Li–Al–H system for solar thermal energy storage. RSC Adv 2016. [DOI: 10.1039/c6ra16983j] [Citation(s) in RCA: 19] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
2LiH(s) + 2Al(s) → 2LiAl(s) + H2(g).
Collapse
|
45
|
Abstract
The LiBH4–NaBH4 system was investigated experimentally and theoretically (XRD, TPPA, DSC and ab initio calculations). All collected data and literature values were used for a thermodynamic assessment by the calphad method.
Collapse
|
46
|
Thermal decomposition of sodium amide, NaNH2, and sodium amide hydroxide composites, NaNH2–NaOH. Phys Chem Chem Phys 2016; 18:25257-25264. [DOI: 10.1039/c6cp01604a] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Composites of NaNH2 and the omnipresent NaOH have a lower melting temperature and form a non-stoichiometric solid solution, Na(OH)1−x(NH2)x, during heating.
Collapse
|
47
|
Synthesis and thermal stability of perovskite alkali metal strontium borohydrides. Dalton Trans 2016; 45:831-40. [DOI: 10.1039/c5dt03590b] [Citation(s) in RCA: 19] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Synthesis of new thermally stable perovskite-type metal strontium borohydrides, MSr(BH4)3 (M = K, Rb, Cs).
Collapse
|
48
|
Barium borohydride chlorides: synthesis, crystal structures and thermal properties. Dalton Trans 2016; 45:8291-9. [DOI: 10.1039/c6dt00772d] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
A series of novel barium-based borohydrides, structurally resembling various BaCl2 and BaBr2 polymorphs, were prepared by mechanochemistry.
Collapse
|
49
|
Synthesis, structure and properties of new bimetallic sodium and potassium lanthanum borohydrides. Dalton Trans 2016; 45:19002-19011. [DOI: 10.1039/c6dt03671f] [Citation(s) in RCA: 21] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
New compounds, NaLa(BH4)4 and K3La(BH4)6, are synthesized. NaLa(BH4)4 has a new structure type and has partial reversibility for hydrogen release.
Collapse
|
50
|
Scandium functionalized carbon aerogel: Synthesis of nanoparticles and structure of a new ScOCl and properties of NaAlH4 as a function of pore size. J SOLID STATE CHEM 2015. [DOI: 10.1016/j.jssc.2015.08.035] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/23/2022]
|