New Triclinic Perovskite-Type Oxide Ba5CaFe4O12 for Low-Temperature Operated Chemical Looping Air Separation

We present the discovery of Ba5CaFe4O12, a new iron-based oxide with remarkable properties as a low-temperature driven oxygen storage material (OSM). OSMs, which exhibit selective and rapid oxygen intake and release capabilities, have attracted considerable attention in chemical looping technologies. Specifically, chemical looping air separation (CLAS) has the potential to revolutionize oxygen production as it is one of the most crucial industrial gases. However, the challenge lies in utilizing OSMs for energy-efficient CLAS at lower temperatures. Ba5CaFe4O12, a cost-competitive material, possesses an unprecedented 5-fold perovskite-type A5B5O15-δ structure, where both Fe and Ca occupy the B sites. This distinctive structure enables excellent oxygen intake/release properties below 400 °C. This oxide demonstrates the theoretical daily oxygen production rate of 2.41 mO23 kgOSM-1 at 370 °C, surpassing the performance of the previously reported material, Sr0.76Ca0.24FeO3-δ (0.81 mO23 kgOSM-1 at 550 °C). This discovery holds great potential for reducing costs and enhancing the energy efficiency in CLAS.

Development of the high energy engineering X-ray (HEX) superconducting wiggler, magnetic measurement, installation, and commissioning

The High energy Engineering X-ray (HEX) diffraction beamline at the National Synchrotron Light Source II (NSLS-II) at Brookhaven National Lab (BNL) is the first high-energy beamline capable of reaching 200 keV for a monochromatic beam. With the 3 GeV electron beam energy for the NSLS-II ring, only the superconducting wiggler (SCW) producing greater than 4 T peak field can cover these ranges with a sufficient number of photons. The 1.2 m-long HEX-SCW has a period length of 70 mm and a field strength on-axis of 4.3 T. It utilizes no liquid helium, and the vertical aperture size of the electron beam vacuum chamber is 8 mm. Unlike regular undulators/wigglers, there is no standard configuration for the magnetic measurement system for superconducting insertion devices. The NSLS-II Insertion Devices group has developed, in collaboration with the vacuum group, a novel in-vacuum Hall mapper with a 1.75 m in-vacuum linear motor and an in-vacuum flip coil system utilizing many commercial-off-the-shelf products. The measurements were conducted at the BNL, and the device was installed in the ring and commissioned. This paper provides a description of the SCW and its magnetic measurement systems, as well as a brief account of the installation and commissioning efforts.

Synthesis and Characterization of the Orthorhombic Sn3 O4 Polymorph

An unexplored tin oxide crystal phase (Sn₃ O₄ ) was experimentally synthesized via a facile hydrothermal method. After tuning the often-neglected parameters for the hydrothermal synthesis, namely the degree of filling of the precursor solution and the gas composition in the reactor head space, an unreported X-ray diffraction pattern was discovered. Through various characterization studies, such as Rietveld analysis, energy dispersive X-ray spectroscopy, and first-principles calculations, this novel material was characterized as orthorhombic mixed-valence tin oxide with the composition Sn^II ₂ Sn^IV O₄ . This orthorhombic tin oxide is a new polymorph of Sn₃ O₄ , which differs from the reported conventional monoclinic structure. Computational and experimental analyses showed that orthorhombic Sn₃ O₄ has a smaller band gap (2.0 eV), enabling greater absorption of visible light. This study is expected to improve the accuracy of hydrothermal synthesis and aid the discovery of new oxide materials.

Tunable Oxygen Intake/Release Characteristics of Brownmillerite-Type Ca2AlMnO5+δ Involving Atomic Defect Formations

The oxygen intake/release characteristics were systematically studied for Ca₂AlMnO_5+δ samples synthesized under precisely controlled oxygen pressures. Both the oxygen storage capacity (OSC) and operating temperature were systematically lowered as the oxygen pressure in the firing atmosphere increased. Notably, the sample fired under a 1% O₂ atmosphere exhibited sufficiently large OSC and superior oxygen intake/release kinetics to the pristine sample synthesized in an anaerobic condition. The high-angle annular dark-field scanning TEM observation revealed that the samples contain defects in their atomic arrangement when fired in oxygen-rich atmospheres. This result indicates that the oxygen intake/release characteristics of Ca₂AlMnO_5+δ are sensitive to the synthesis condition and widely tunable even without chemical substitutions.

Middle meningeal artery embolization for chronic subdural hematoma with cerebrospinal fluid hypovolemia: A report of 2 cases

BACKGROUND

Chronic subdural hematoma (CSDH) with cerebrospinal fluid hypovolemia syndrome (CHS) remains refractory to standard treatment with hematoma drainage by burr hole and irrigation and/or epidural blood patch. Previously, we reported the utility of middle meningeal artery (MMA) embolization for intractable CSDH. In this study, we present the usefulness of MMA embolization as a treatment for CSDHs with CHSs.

CASES

We present two cases of CSDHs with CHSs occurring in patients, 1 treated with burr hole craniotomy and irrigation, and the other treated with the epidural blood patch. Both patients exhibited similar-appearing bilateral relatively-thin hematomas, hyperplasia, and enhanced contrast effects in the dura mater, and extradural hygroma in the cervical portion on enhanced magnetic resonance imaging scans. Also, to reviewing prior literature and imaging findings, they had already undergone conventional treatment. We added MMA embolization treatment and they followed a good course.

RESULTS

Despite the known intractable outcomes of patients with CSDHs with CHSs, MMA embolization worked well in the current case series.

CONCLUSION

MMA embolization might be considered as a preferred therapeutic option for CSDHs with CHSs in order to buy time before the epidural blood patch starts working.

Unusual chirality transfer from silica to metallic nanoparticles with formation of distorted atomic array in crystal lattice structure

Transfer of chirality from chiral organic molecules to metallic nanoparticles (NPs) is a very attractive field of research and some unique approaches to obtaining chiral metallic NPs have been developed. However, to date, there has been no report in the literature that the chiral information of silica can be transferred into metallic NPs. In this work, a new chirality transfer system to metallic NPs from chiral silica has been achieved. The chiral transfer was performed by simple two steps: (1) trapping metal cations of silver (Ag) and gold (Au) in chiral silica of nano fibrous bundles embedding poly(ethyleneimine) inside and (2) thermoreducing the metal ions into metallic NPs. The metallic NPs of Au and Ag grown around a silica frame, using a thermo-reduction (calcination) process, showed a spherical shape with a size of about 30 nm. Interestingly, the metallic NPs detached or isolated from the silica via crushing and/or hydrolysis of the silica showed remarkable circular dichroism activity in their plasmon absorption band with an exciton coupling feature. Using an atomic resolution scanning transmission protocol, it was found that the chiral metallic NPs have a definite distortion in the atomic array in their crystal lattice structures. In comparison, achiral metallic NPs, which were prepared using a similar method around achiral silica bundles, showed a precisely ordered atomic line without distortion.

Factors predicting early postpartum glucose intolerance in Japanese women with gestational diabetes mellitus: decision-curve analysis

AIMS

To identify factors predicting early postpartum glucose intolerance in Japanese women with gestational diabetes mellitus, using decision-curve analysis.

METHODS

A retrospective cohort study was performed. The participants were 123 Japanese women with gestational diabetes who underwent 75-g oral glucose tolerance tests at 8-12 weeks after delivery. They were divided into a glucose intolerance and a normal glucose tolerance group based on postpartum oral glucose tolerance test results. Analysis of the pregnancy oral glucose tolerance test results showed predictive factors for postpartum glucose intolerance. We also evaluated the clinical usefulness of the prediction model based on decision-curve analysis.

RESULTS

Of 123 women, 78 (63.4%) had normoglycaemia and 45 (36.6%) had glucose intolerance. Multivariable logistic regression analysis showed insulinogenic index/fasting immunoreactive insulin and summation of glucose levels, assessed during pregnancy oral glucose tolerance tests (total glucose), to be independent risk factors for postpartum glucose intolerance. Evaluating the regression models, the best discrimination (area under the curve 0.725) was obtained using the basic model (i.e. age, family history of diabetes, BMI ≥25 kg/m² and use of insulin during pregnancy) plus insulinogenic index/fasting immunoreactive insulin <1.1. Decision-curve analysis showed that combining insulinogenic index/fasting immunoreactive insulin <1.1 with basic clinical information resulted in superior net benefits for prediction of postpartum glucose intolerance.

CONCLUSIONS

Insulinogenic index/fasting immunoreactive insulin calculated using oral glucose tolerance test results during pregnancy is potentially useful for predicting early postpartum glucose intolerance in Japanese women with gestational diabetes.

A Case of Diabetic Retinopathy with both Retinal Neovascularization and Complete Posterior Vitreous Detachment

PURPOSE

Report of a case with retinal neovascularization developing in the setting of diabetic retinopathy despite complete posterior vitreous detachment (PVD).

CASE REPORT

A 76-year-old man had had type II diabetes mellitus for more than 30 years. Weiss' ring was detected by direct and indirect ophthalmoscopy. PVD was thus considered to be complete. On the other hand, fluorescein angiography showed two areas of hyperfluorescence at the margin of the retinal nonperfusion area.

CONCLUSIONS

The present case underscores the importance of periodic follow-up using fluorescein angiography, given the probability of retinal neovascularization development and proliferative changes for many years even in diabetic retinopathy associated with complete PVD.

Nanophase-separated Ni3Nb as an automobile exhaust catalyst

Nanophase-separated Ni₃Nb alloy exhibited higher performance than traditional Pt catalysts toward the remediation of automobile exhaust.

Catalytic remediation of automobile exhaust has relied on precious metals (PMs) including platinum (Pt). Herein, we report that an intermetallic phase of Ni and niobium (Nb) (i.e., Ni₃Nb) exhibits a significantly higher activity than that of Pt for the remediation of the most toxic gas in exhaust (i.e., nitrogen monoxide (NO)) in the presence of carbon monoxide (CO). When subjected to the exhaust-remediation atmosphere, Ni₃Nb spontaneously evolves into a catalytically active nanophase-separated structure consisting of filamentous Ni networks (thickness < 10 nm) that are incorporated in a niobium oxide matrix (i.e., NbO_x (x < 5/2)). The exposure of the filamentous Ni promotes NO dissociation, CO oxidation and N₂ generation, and the NbO_x matrix absorbs excessive nitrogen adatoms to retain the active Ni⁰ sites at the metal/oxide interface. Furthermore, the NbO_x matrix immobilizes the filamentous Ni at elevated temperatures to produce long-term and stable catalytic performance over hundreds of hours.

Porcine Amelogenin is Expressed from the X and Y Chromosomes

Amelogenin is the major enamel matrix component in developing teeth. In eutherian mammals, amelogenin is expressed from the X chromosome only, or from both the X and Y chromosomes. Two classes of porcine amelogenin cDNA clones have been characterized, but the chromosomal localization of the gene(s) encoding them is unknown. To determine if there are sex-based differences in the expression of porcine amelogenin, we paired PCR primers for exons 1a, 1b, 7a, and 7b, and amplified enamel organ-derived cDNA separately from porcine males and females. The results show that exons 1a/2a and 7a are always together and can be amplified from both males (XY) and females (XX). Exons 1b/2b and 7b are also always paired, but can be amplified only from females. We conclude that porcine amelogenin is expressed from separate genes on the X and Y chromosomes, and not, as previously proposed, from a single gene with two promoters.

Tailoring the surface-oxygen defects of a tin dioxide support towards an enhanced electrocatalytic performance of platinum nanoparticles

Tin-dioxide nanofacets (SnO2 NFs) are crystal-engineered so that oxygen defects on the maximal {113} surface are long-range ordered to give rise to a non-occupied defect band (DB) in the bandgap. SnO2 NFs-supported platinum-nanoparticles exhibit an enhanced ethanol-electrooxidation activity due to the promoted charge-transport via the DB at the metal-semiconductor interface.

Insights into the dominant factors of porous gold for CO oxidation

Three different porous Au catalysts that exhibit high catalytic activity for CO oxidation were prepared by the leaching of Al from an intermetallic compound, Al2Au, with 10 wt. %-NaOH, HNO3, or HCl aqueous solutions. The catalysts were investigated using Brunauer-Emmett-Teller measurements, synchrotron X-ray powder diffraction, hard X-ray photoelectron spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy (TEM). Broad diffraction peaks generated during the leaching process correlated with high activity for all the porous Au catalysts. CO oxidation catalyzed by porous Au leached with NaOH and HNO3 is considered to be dominated by different mechanisms at low (< 320 K) and high (> 370 K) temperatures. Activity in the low-temperature region is mainly attributed to the perimeter interface between residual Al species (AlOx) and porous Au, whereas activity in the high-temperature region results from a high density of lattice defects such as twins and dislocations, which were evident from diffraction peak broadening and were observed with high-resolution TEM in the porous Au leached with NaOH. It is proposed that atoms located at lattice defects on the surfaces of porous Au are the active sites for catalytic reactions.

Plasmon-mediated photothermal conversion by TiN nanocubes toward CO oxidation under solar light illumination

Titanium-nitride (TiN) nanocubes were decorated with platinum nanoparticles via a wet-chemistry route to yield TiN-supported Pt catalysts (Pt/TiN).

Correlation between the surface electronic structure and CO-oxidation activity of Pt alloys

The CO-oxidation activity of Pt and Pt alloys, Pt3T (T = Ti, Hf, Ta, Pt), shows a volcano-type dependence on the d-band center of the catalysts.