Ex vivo comparison of V.A.C.® Granufoam Silver™ and V.A.C.® Granufoam™ loaded with a first-in-class bis-dialkylnorspermidine-terphenyl antibiofilm agent

Implementation of negative pressure wound therapy (NPWT) as a standard of care has proven efficacious in reducing both the healing time and likelihood of nosocomial infection among pressure ulcers and traumatic, combat-related injuries. However, current formulations may not target or dramatically reduce bacterial biofilm burden following therapy. The purpose of this study was to determine the antibiofilm efficacy of an open-cell polyurethane (PU) foam (V.A.C.® Granufoam™) loaded with a first-in-class compound (CZ-01179) as the active release agent integrated via lyophilized hydrogel scaffolding. An ex vivo porcine excision wound model was designed to perform antibiofilm efficacy testing in the presence of NPWT. PU foam samples loaded with a 10.0% w/w formulation of CZ-01179 and 0.5% hyaluronic acid were prepared and tested against current standards of care: V.A.C.® Granufoam Silver™ and V.A.C.® Granufoam™. We observed statistically significant reduction of methicillin-resistant Staphylococcus aureus (MRSA) and Acinetobacter baumannii biofilms with the CZ-01179 antibiofilm foam in comparison to current standard of care foams. These findings motivate further development of an antibiofilm PU foam loaded with CZ-01179.

Antibiofilm potential of a negative pressure wound therapy foam loaded with a first-in-class tri-alkyl norspermidine-biaryl antibiotic

Negative-pressure wound therapy (NPWT) is commonly utilized to treat traumatic injuries sustained on the modern battlefield. However, NPWT has failed to decrease the incidence of deep tissue infections experienced by Wounded Warriors, despite attempts to integrate common antimicrobials, like Ag+ nanoparticles, into the wound dressing. The purpose of this study was to incorporate a unique antibiofilm compound (CZ-01179) into the polyurethane matrix of NPWT foam via lyophilized hydrogel scaffolding. Foam samples with 2.5%, 5.0%, and 10.0% w/w CZ-01179 were produced and antibiofilm efficacy was compared to the current standards of care: V.A.C.® GRANUFOAM SILVER™ and V.A.C.® GRANUFOAM™. Gravimetric analysis and elution kinetics testing confirmed that this loading technique was both repeatable and controllable. Furthermore, zone of inhibition and antibiofilm efficacy testing showed that foam loaded with CZ-01179 had significantly increased activity against planktonic and biofilm phenotypes of methicillin-resistant Staphylococcus aureus and Acinetobacter baumannii compared to the clinical standards. These findings motivate additional ex vivo and in vivo work with NPWT foam loaded with CZ-01179 with the overall objective of reducing NPWT-associated infections that complicate battlefield-related and other wounds.

Examination of a first-in-class bis-dialkylnorspermidine-terphenyl antibiotic in topical formulation against mono and polymicrobial biofilms

Biofilm-impaired tissue is a significant factor in chronic wounds such as diabetic foot ulcers. Most, if not all, anti-biotics in clinical use have been optimized against planktonic phenotypes. In this study, an in vitro assessment was performed to determine the potential efficacy of a first-in-class series of antibiofilm antibiotics and compare outcomes to current clinical standards of care. The agent, CZ-01179, was formulated into a hydrogel and tested against mature biofilms of a clinical isolate of methicillin-resistant Staphylococcus aureus and Pseudomonas aeruginosa ATCC 27853 using two separate methods. In the first method, biofilms were grown on cellulose discs on an agar surface. Topical agents were spread on gauze and placed over the biofilms for 24 h. Biofilms were quantified and imaged with confocal and scanning electron microscopy. In the second method, biofilms were grown on bioabsorbable collagen coupons in a modified CDC biofilm reactor. Coupons were immersed in treatment for 24 h. The first method was limited in its ability to assess efficacy. Efficacy profiles against biofilms grown on collagen were more definitive, with CZ-01179 gel eradicating well-established biofilms to a greater degree compared to clinical standards. In conclusion, CZ-01179 may be a promising topical agent that targets the biofilm phenotype. Pre-clinical work is currently being performed to determine the translatable potential of CZ-01179 gel.

In vitro testing of a first-in-class tri-alkylnorspermidine-biaryl antibiotic in an anti-biofilm silicone coating

Biofilm-related infection is among the worst complication to prosthetic joint replacement procedures; once established on the implant surface, biofilms show strong recalcitrance to clinical antibiotic therapy, frequently requiring costly revision procedures and prolonged systemic antibiotics for their removal. A well-designed active release coating might assist host immunity in clearing bacterial contaminants within the narrow perioperative window and ultimately prevent microbial colonization of the joint prosthesis. A first-in-class compound (CZ-01127) was tested as the active release agent in a silicone (Si) coating using an in vitro dynamic flow model of surgical site contamination and compared with analogous coatings containing clinical gold-standard antibiotics vancomycin and gentamicin; the CZ-01127 coating outperformed both vancomycin and gentamicin coatings and was the only to decrease the methicillin-resistant Staphylococcus aureus (MRSA) inocula below detectable limits for the first 3 days. The antimicrobial activity of CZ-01127, and for comparison vancomycin and gentamicin, were characterized against both planktonic and biofilm MRSA using the minimum inhibitory concentration (MIC) assay, serial passages, and serial dilution tests against established biofilms grown with a CBR 90 CDC biofilm reactor. Despite a similar MIC (1 µg/ml) and behavior in a 25-day serial passage analysis, CZ-01127 displayed much greater bactericidal activity against established biofilms and was the only to decrease biofilm colony forming units (CFUs) below detectable limits at the highest concentration tested (500 µg/ml). Coating release profiles were characterized using ATR-FTIR and displayed burst release kinetics within the decisive period of the perioperative window suggesting the silicon carrier is broadly useful for screening antibiotic compound for local delivery applications. STATEMENT OF SIGNIFICANCE: With an aging population, an increasing number of people are undergoing total joint replacement procedures in which diseased joint tissues are replaced with permanent metallic implants. Some of these procedures are burdened by costly and debilitating infections. A promising approach to prevent infections is the use of an antimicrobial coating on the surface of the implant which releases antibiotics into the surgical site to prevent infection. In this study, we tested a new antibiotic compound formulated in a silicone coating. Data showed that this compound was more effective at killing pathogenic methicillin resistant Staphylococcus aureus (MRSA) bacteria than two clinical gold-standard antibiotics-vancomycin and gentamicin-and could be a promising agent for antimicrobial coating technologies.

In vivo analysis of a first-in-class tri-alkyl norspermidine-biaryl antibiotic in an active release coating to reduce the risk of implant-related infection

Prosthetic joint infection (PJI) is a well-known and persisting problem. Active release coatings have promise to provide early protection to an implant by eradicating small colony biofilm contaminants or planktonic bacteria that can form biofilm. Traditional antibiotics can be limited as active release agents in that they have limited effect against biofilms and develop resistance at sub-lethal concentrations. A unique first-in-class compound (CZ-01127) was assessed as the active release agent in a silicone (Si)-based coating to prevent PJI in a sheep model of joint space infection. Titanium (Ti) plugs contained a porous coated Ti (PCTi) region and polymer-coated region. Plugs were implanted into a femoral condyle of sheep to assess the effect of the Si polymer on cancellous bone ingrowth, the effect of CZ-01127 on bone ingrowth, and the ability of CZ-01127 to prevent PJI. Microbiological results showed that CZ-01127 was able to eradicate bacteria in the local region of the implanted plugs. Data further showed that Si did not adversely affect bone ingrowth. However, bacteria that reached the joint space (synovium) were not fully eradicated. Outcomes suggested that the CZ-01127 coating provided local protection to the implant system in a challenging model, the design of which could be beneficial for testing future antimicrobial therapies for PJI. STATEMENT OF SIGNIFICANCE: Periprosthetic joint infection (PJI) is now commonplace, and constitutes an underlying problem that patients and physicians face. Active release antibiotic coatings have potential to prevent these infections. Traditional antibiotics are limited in their ability to eradicate bacteria that reside in biofilms, and are more susceptible to resistance development. This study addressed these limitations by testing the efficacy of a unique antimicrobial compound in a coating that was tested in a challenging sheep model of PJI. The unique coating was able to eradicate bacteria and prevent infection in the environment adjacent to the implant. Bacteria that escaped into the joint space still caused infection, yet benchmark data can be used to optimize the coating and translate it toward clinical use.

Access to the pactamycin core via an epoxide opening cascade

A synthetic strategy to establish five contiguous stereocenters, in a stereocontrolled manner, on the core structure of pactamycin is described. This sequence exploits the use of a Lewis acid mediated epoxide opening cascade to set the relative configuration of the C4-C5 diol while reversing the configuration at C7. This sequence provides the oxygenated core of pactamycin in just 11 steps.

Chlorotrimethylsilane activation of acylcyanamides for the synthesis of mono-N-acylguanidines

A simple and efficient one-pot method for the synthesis of monoprotected guanidines is presented. Treatment of an acylcyanamide with chlorotrimethylsilane generates a reactive N-silylcarbodiimide capable of guanylating a variety of amines. Typically the reaction is complete in 15 min for primary and secondary aliphatic amines at rt. Hindered amines and anilines are also competent nucleophiles but require extended reaction times.