Ethical principles in dental healthcare: Relevance in the current technological era of artificial intelligence

In the current technological era, dental practitioners are faced with various ethical challenges, highlighting the importance of bioethics in this healthcare discipline. The rise of artificial intelligence has recently sparked a debate regarding the privacy of patient data. While the advancements may offer innovative treatment options, their long-term effects may not be fully understood, raising questions about the responsible implementation of such methods. Thus, conscientious and ethical AI use in dentistry encompasses that patients be notified about how their data is used and also about the involvement of AI-based decision-making. This paper explores the key bioethical considerations in dental healthcare, with a focus on evidence-based AI development and use. The framework of ethical principles and guidelines provided would foster trust between the clinician and patients, while promoting the highest standards of care.

Stress distribution and displacement with four different types of MARPE on craniofacial complex: A three-dimensional finite element analysis

BACKGROUND

Various designs of mini-implants assisted rapid palatal expander (MARPE) appliances can impact treatment effectiveness through their biomechanical effects. The purpose of the study was to study the stress distribution and displacement with four different designs of the MARPE appliance on the craniofacial complex.

METHODS

A 3D finite element model of the craniofacial complex was created from CBCT DICOM data, comprising four distinct groups. Each group consisted of one 4-hole expansion screw positioned between the second premolar and first molar in all models. Group 1 used four single-cortical mini-implants (1.5×8mm) engaging only the palatal cortex. Group 2 employed four mini-implants (1.5×11mm) engaging both the palatal and nasal cortices. Group 3 had monocortical implants on the palatal slopes, while Group 4 was similar to group 3 with implants in the acrylic wings. Comparisons between groups were made for anchorage (groups 1 and 2), mini-implant position (groups 1 and 3) and surface effect (groups 3 and 4). Von Mises stresses and displacements at various skeletal and dental points were evaluated using ANSYS software.

RESULTS

The highest stresses were observed in the maxillary, pterygoid and zygomatic bones, as well as in the mid- palatal suture in all four groups. Downward and forward rotation of the craniofacial complex was noted. Group 2 showed greater skeletal expansion than group 1. Among groups 1 and 3, group 3 showed a better stress distribution. Group 4 showed less dentoalveolar rotation than group 3.

CONCLUSIONS

The MARPE appliances had an impact on the craniofacial complex with stresses on the mid-palatal suture, maxillary bone, pterygoid bones and anterior teeth. Clockwise rotation of the maxilla, zygomatic bones and dentition was noted, while the pterygoid bones and pterygoid suture were displaced backwards. MARPE with bicortical anchorage produces better skeletal expansion. Placing implants on the palatal slopes with acrylic wings results in better skeletal expansion with less clockwise rotation of the dentition.

Association, diagnostic accuracy and optimal threshold of salivary IGF-1 and vitamin DBP levels for estimation of pubertal growth spurt: A cross sectional study

AIM

To determine the association of salivary IGF-1 and vitamin D Binding Protein with cervical vertebral maturation index (CVMI) across the pubertal stages and to determine the diagnostic accuracy and optimal threshold of these biomarkers for estimation of pubertal growth.

DESIGN

Cross-sectional observational study.

SETTING

Material and methods. All patients in the age group of 8-23 years from the Outpatient Department of Orthodontics and Dentofacial orthopaedics, between the period of July 2020 to December 2020 meeting the eligibility criteria were included. Lateral cephalograms obtained from the patients were divided into pre pubertal, pubertal & post pubertal groups based on CVMI by Baccetti et al. Unstimulated whole saliva was collected by a swab-based method & analyzed with ELISA.

RESULTS

Ninety-four participants were divided in three stages: prebubertal (30), pubertal (33), post pubertal (31). A significant difference was observed in the salivary IGF-1 & DBP across the three stages. Post-hoc test revealed significantly higher mean salivary IGF-1 & DBP in pubertal group than in pre & post-pubertal group. Receiver operator characteristic curve revealed excellent diagnostic accuracy for salivary IGF-1with areas under the curve (AUC) of 0.962, satisfactory for vitamin DBP with AUC of 0.831 and poor diagnostic accuracy for age with AUC of 0.536. Youden index revealed the optimal threshold to be 3.96ng/ml and 124.13pg/ml for salivary IGF-1 and vitamin DBP respectively.

CONCLUSION

The levels of Salivary IGF-1 and Vitamin DBP increased during C3 and C4 stages. Compared to vitamin DBP diagnostic accuracy of salivary IGF-1 was excellent and an optimal threshold of 3.96ng/ml can be utilized to distinguish pubertal & non-pubertal participants.

Variations in black carbon and particulate matters (PM1, PM2.5 and PM10) during firecrackers bursting episodes and biomass burning: A case study during the Diwali festival

Introduction: The Black Carbon (BC) and Particulate Matters (PMs) was measured in the Diwali festival during 3-7 November, 2021. Diwali is being one of the main festivals of India accompanied by lighting and firecrackers bursting. Materials and methods: BC concentration was measured by aerosol black carbon low-cost sensor/detector and PM1, PM2.5 and PM10 mass concentration as well as number concentration was measured using Grimm Aerosol Spectrometer at Agra, India. Results: Average mass of PM1 (<1 μm), PM2.5 ( <2.5 μm) and PM10 ( <10 μm) were 218.32±56.82 μg/m3, 261.56±74.38 μg/m3 and 380.40±67.78 μg/ m3 respectively in Diwali day (2021). The observed concentration of PM was much higher than National Ambient Air Quality Standards (NAAQS) and World Health Organization (WHO) standard limits. Diurnal peaks for all the pollutants (PM1, PM2.5 and PM10) were perceived in the evening time which was due to festival celebration events. Particle Size number Distribution (PSND) showed one major peak in the particle <1 μm size range. BC mass concentration was found to be 16.28±5.62 μg/m3 in Diwali days. BC/PMs ratio decreases as the PM size increases due to the heavy load of PM2.5. Conclusion: BC and PM concentration was significantly amplified on Diwali due to firecrackers bursting and candles and biomass burning which was responsible for the poor air quality. Particle Mass Size Distribution (PSMD) showed multiple peaks while PSND showed one major peak in fine mode. Higher PM1/PM2.5 indicated the abundance of fine particles as compared to coarse. BC concentration was increased by 20 % on Diwali day due to firecracker bursting, other burning materials and more vehicles movement.

Serum biomarkers associated with radiographic skeletal maturity indicators: A systematic review and meta-analysis

Objective:

To evaluate the relevant scientific literature to determine the association between different serum biomarker levels and radiographic skeletal maturity indicators.

Data Search, Screening and Eligibility:

A literature search was carried out on PubMed, Cochrane Library, Google Scholar, Semantic Scholar, Science Direct and Opengrey.eu up to November 2021 and 7466 records were retrieved via the electronic search. Study selection, data extraction and subsequent risk of bias assessment (RoB) was carried out independently by two authors. In case of any discrepancy, a third author was consulted.

Results:

After the exclusion of duplicates and the application of inclusion exclusion criteria, 19 studies (published in 25 articles) were included in the systematic review out of which 17 had a cross-sectional and two had a cohort study design. For the meta-analysis, based on the homogeneity, five cross-sectional studies measuring serum IGF-1 levels were incorporated. The meta-analysis revealed that the serum IGF-1 levels peak at the CS4 stage (401.77 ng/mL [333.50 – 470.05]) in the pooled group. However, in the subgroup analysis, it was found that the serum IGF-1 levels peak at CS3 in women (422.82 ng/mL [377.46–468.18]) and CS4 in men (487.04 ng/mL [391.83–582.25]).

Conclusion:

Among the various biomarkers evaluated, serum IGF-1 was the most associated with different stages of radiographic skeletal maturity indicators with its levels peaking at CS3 in women and CS4 in men.

Psychosocial Maternal Perception of the Outcome of Pre Surgical Infant Orthopedics in Infants Born with Cleft Lip and Palate

BACKGROUND

The setback of having a child with cleft lip and palate deeply affects the parents psychology. The Pre Surgical Infant Orthopaedics(PSIO) is a promising procedure for improvement in facial morphology prior to primary lip repair.

OBJECTIVE

The current study examines the perception of effects of PSIO procedures on the facial appearance of newborns with cleft lip/palate by their mothers and finds its correlation if any, with the change in psychosocial status of the mothers.

STUDY DESIGN

The mothers of 50 infants(0-6 months) born with cleft lip/palate rated the nasal morphology, extent of cleft defect and overall facial morphology on a Likert's scale before and after PSIO procedure. This was correlated with changes in mother's depression, anxiety and stress levels by using the validated Hindi-version of Depression Anxiety and Stress scale(DASS-42) index before and after PSIO.

RESULTS

The mothers reported a significant improvement in all the morphological parameters for their infants with PSIO which correlated well with significant reduction in the DASS scores from 22.54(severe) to 7.10(normal) for depression, 20.64(extremely severe) to 6.46(normal) for anxiety and 24.7(severe) to 8.4(normal) for stress.

CONCLUSIONS

The changes in facial morphology by PSIO procedures are well perceived by mothers and significantly improves their depression, anxiety and stress levels.

What besets entrepreneurs in renewable energy sector? – Insights from the Indian state of Gujarat

Purpose

India has acquired global leadership in renewable energy (RE) deployment because of its commitment to achieve 175 GW of installed capacity by 2022. Entrepreneurship driven by innovation and policy push is essential for energy sector transition. Despite policy focus on the diffusion of RE technology, there are several challenges that plague innovation and RE entrepreneurship development in Gujarat, India. Hence, the purpose of this study is to apply an empirical approach to identify major challenges faced by RE entrepreneurs operating in Gujarat.

Design/methodology/approach

An empirical correlational analysis has been taken up to explore individual- and firm-level characteristics of 54 RE entrepreneurs in Gujarat across six districts. Moreover, challenges faced by them related to policy and market have been investigated. Gujarat has been selected as the study area, as it has an installed capacity of 11,000 MW and houses around 11% of the total RE potential of the country.

Findings

Major challenges faced by RE entrepreneurs in Gujarat comprise of financial risks, market incumbency, low profitability, uncertainty of demand and lack of skilled labour.

Practical implications

This study offers an empirical grounding to policymakers for fostering an ecosystem of entrepreneurship and innovation specific to RE sector in India and other developing nations.

Originality/value

This study is unique, as previous studies on sustainability-driven entrepreneurship are majorly theoretical and lack empirical foundations. Moreover, there are even lesser quantitative studies exploring challenges to RE entrepreneurship specific to India.

Biomechanical effects of Skeletally anchored Class III elastics on the maxillofacial complex: a 3D finite element analysis

Background

Although, the outcomes and changes in the maxillofacial complex after the application of intraoral bone anchored Class III elastics, have been reported by multiple clinical studies, there was no finite element study to assess and evaluate the stress pattern and displacement on maxillomandibular complex with bimaxillary anchorage. The present study aims to evaluate the biomechanical effects on maxillomandibular complex of Skeletally anchored Class III elastics with varying angulations using the 3D finite element analysis.

Methodology

Two 3-dimensional analytical models were developed using the Mimics 8.11 (Materialise: Leuven, Belgium) and ANSYS software Version 12.1 (ANSYS Inc, Canonsburg, PA, USA) from sequential computed tomography images taken from a Skeletal Class III subject. The models were meshed into 465,091 tetrahedral elements and 101,247 nodes. Intraoral mechanics for skeletally anchored maxillary protraction (I-SAMP) were applied on two models i.e. A and B (without and with maxillary expansion respectively) between miniplates on maxilla and mandible on both right and left sides with three different angulations of forces—10°, 20° and 30°).

Results

Although the craniomaxillary complex in both the models (A and B) displaced forward while demonstrating rotations in opposite directions, the displacements and rotations decreased gradually with the increase of the angle of load application from 10° to 30°. The mandible rotated clockwise in both the simulations, but the displacement of mandibular surface landmarks was higher in Simulation A. However, the antero-inferior displacement of the glenoid fossa was higher in Simulation B than in A.

Conclusion

Significant displacement of maxillofacial sutures and structures was witnessed with I-SAMP with maxillary expansion and Class III elastics for correction of Skeletal Class III with maxillary retrognathism. Thus, I-SAMP with maxillary expansion is a desired protocol for treatment of maxillary retrognathism. However, the prescribed angulation of the Class III elastics should be as low as possible to maximise the desired effects.

Effect of fixed functional appliances on pharyngeal airway dimensions in Skeletal Class II individuals - A scoping review

BACKGROUND

Skeletal Class II malocclusion due to a retrognathic mandible produces a backwardly positioned tongue and soft palate, emanating compromised upper airway dimensions and breathing difficulties.

AIMS

The present review aims to explore and concise the findings of the existing studies assessing the effects of fixed functional appliances on pharyngeal airway dimensions by advancing the mandible.

DESIGN

A literature search was carried out on MEDLINE/PubMed, Cochrane Library, Science direct, Semantic Scholar and Google Scholar databases for studies up to December 2020, resulting in 1037 studies. Specified inclusion/exclusion criteria guided the selection of 18 relevant articles. The sample size, type of the appliance, method of assessment and outcomes of these articles were assessed in detail and tabulated.

RESULTS

Out of 18 studies included, 12 were retrospective longitudinal and the remaining were clinical trials. Majority of the studies (72%) reported a positive influence of the fixed functional appliances on the dimensions of the oropharyngeal and hypopharyngeal airways with minimal effects on nasopharyngeal airway.

CONCLUSION

Thus, it can be concluded that fixed functional appliances have a beneficial effect on the middle and lower pharyngeal airway dimensions by advancing the mandible.

Non-invasive methods for the assessment of biomarkers and their correlation with radiographic maturity indicators - a scoping review

BACKGROUND

Detection of skeletal maturity is vital in orthodontic treatment timing and planning. Traditional methods include hand-wrist radiography and cervical vertebral maturation index (CVMI). Though the radiographic methods are well established and routinely used to assess skeletal maturation, they carry the drawback of subjective perception and low reproducibility. With evolving concepts, skeletal maturation has been assessed quantitatively through biomarkers obtained from saliva, gingival crevicular fluid (GCF), and urine. The scoping review aims to explore the various biomarkers assessed through non-invasive methods and their correlation with radiographic skeletal maturity.

METHODOLOGY

The literature search was carried out on MEDLINE via Pubmed, Cochrane Library (Cochrane database of systematic reviews), Cochrane central register of controlled trials (CENTRAL), Google Scholar, Semantic Scholar, ScienceDirect, and Opengrey.eu for articles up to and including November 2020. Pertinent articles were selected based on inclusion and exclusion criteria. The results were tabulated based on the type of sample collected, the biomarker assessed, method of sample collection, and the radiographic method used.

RESULTS

The literature search resulted in 12 relevant articles. Among all the studies, 10 studies showed that the concentration of biomarkers increases during the pubertal growth peak. On the contrary, 2 articles showed no significant difference between the levels of biomarkers and pubertal growth peak.

CONCLUSION

It can be concluded that the level of biomarkers increases during the pubertal growth spurt and can provide a quantitative way of assessing skeletal maturity.

Comprehensive management of Crouzon syndrome: A case report with three-year follow-up

Crouzon syndrome is one of the most common craniosynostosis facial syndromes caused by a mutation in the fibroblast growth factor receptor 2 (FGFR2) gene. Less commonly, there is a mutation of the FGFR3 gene which results in Crouzon syndrome syndrome with acanthosis nigricans. It involves the premature fusion of sutures of the cranial vault, base, orbital and maxillary region. The clinical presentation of this congenital deformity depends on the pattern and timing of sutural fusion. The present report describes the features and management of this syndrome in an 18-year-old woman. The patient presented with a hypoplastic maxilla, deficient midface, exorbitism due to shallow orbits, severe crowding and bilateral crossbite. A multidisciplinary approach involving orthodontics and surgical intervention with distraction osteogenesis brought about marked improvement in the facial profile, occlusion and upper airway. The aesthetics and function were greatly enhanced, and the results were found to be stable at the end of three years.

Effect of photobiomodulation on external root resorption during orthodontic tooth movement - a randomized controlled trial

OBJECTIVE

The objective of the study was to compare external root resorption during orthodontic tooth movement between patients who were subjected to photobiomodulation and those who were not.

MATERIALS AND METHODS

The study was designed as a split-mouth, single-blind randomized controlled trial conducted on twenty-two orthodontic patients requiring extraction of maxillary first premolars (age group 13-30years). A buccal force was applied to all the premolars using a 0.019″×0.025″ beta-titanium cantilever spring for 28days. The test group premolars were irradiated by indium-gallium-arsenide (InGaAs) diode laser (980nm, 100mW) 0, 3, 7, 11, 15 and 28days after force application. Each premolar was irradiated at ten locations on the buccal and palatal gingiva resulting in a total energy of 10J delivered per tooth. After 28days, the root surface of all the premolars were studied for the number and volume of resorption craters using three-dimensional optical profilometry by a blinded assessor. One-sample Kolmogorov-Smirnov test was used to ascertain normality and Mann-Whitney U test was applied for data analysis.

RESULTS

All twenty-two patients enrolled completed the study. The root surface analysis showed formation of 32.78% less number of resorption craters (P<0.05) and 39.49% less volume of resorption craters (P<0.05) in the test group premolars relative to the control group premolars.

CONCLUSIONS

The results of the present study, therefore, suggest that photobiomodulation reduces external root resorption during orthodontic tooth movement.

TRIAL REGISTRATION/REGISTRATION NUMBER

CTRI/2018/04/013520.

Closure of large alveolar defect by maxillary alveolar distraction using a vector-controlled distractor appliance in cleft patients: A pilot study

Objective

To assess the treatment outcome of custom made maxillary transport distractor appliance for closure of large alveolar clefts.

Method

A pilot study was conducted on 12 large alveolar cleft defects present in 11 non-syndromic cleft lip and palate patients (1 bilateral and 10 unilateral) in the age group of 16-25 years. All the subjects underwent pre-surgical orthodontics followed by alveolar distraction using custom-made distractor appliance. Study models, lateral cephalogram, panoramic radiograph and cone beam computed tomograms were obtained pre-surgically (T0) and after distractor removal (T1). The reduction in the width and volume of the alveolar cleft defect and change in the mesiodistal axial inclination of the teeth in transport segment following distraction were recorded. P value ​< ​0.05 was considered statistically significant.

Results

Significant reduction in cleft width (9.18 ​mm), volume (89.82 ​mm³) and the change in the mesiodistal axial inclination of the teeth in the transport segment (3.05°) (P ​< ​0.05) were observed. SNA (1.75°), ANB (1.58°), maxillary length (1.58 ​mm), upper incisor inclination (3°) and distal movement of anchorage teeth (0.95 ​mm) also showed significant change (P ​< ​0.05).

Conclusion

The custom-made tooth borne distraction appliance successfully closed the large alveolar cleft defect with minimal or no inadvertent effects on the oral tissues.

Effect of fixed mechanotherapy on psychosocial impact of malocclusion using PIDAQ in the Indian population - A follow up study

Background

The presence of malocclusion in an individual not only distresses the oral form and function but also has a significant impact on the psychological and social well-being of an individual. Adoption of a patient centered approach during the correction of malocclusion serves to benefit both the individual and the orthodontic fraternity, as it aims to improve the function, aesthetics and subsequently, the overall quality of life.

Materials and methods

In this study, the psychosocial impact of malocclusion was evaluated on 93 patients using the IOTN (Index of Orthodontic Treatment Needs) and the PIDAQ (Psychosocial impact of dental aesthetics questionnaire) indices. The questionnaires were paired accordingly and statistically analysed. Association of the age and gender with the psychosocial impact of malocclusion was also assessed.

Results

Mean total and the individual component scores of the PIDAQ were assessed pre and post treatment and a significant reduction in the scores was observed. The IOTN-AC (IOTN - Aesthetic Component) scores also improved drastically with treatment. However, no statistically significant association of age, education level or socioeconomic class with the psychosocial impact of malocclusion was observed.

Conclusion

The significant improvement in the mean PIDAQ and IOTN-AC scores obtained after completion of fixed orthodontic treatment, indicate the high initial psychosocial impact of malocclusion which significantly reduced with treatment, accenting the role of orthodontics in improving the overall psychological and social well-being of an individual.

External apical root resorption in orthodontic patients: molecular and genetic basis

External apical root resorption is one of the most deleterious complications after orthodontic treatment. Studies to explain the causal relationship between orthodontic tooth movement and external apical root resorption have been inconclusive till date. Individual variations in external apical root resorption sometimes overshadow the treatment related factors which indicate genetic predisposition and/or multifactorial etiology. Mechanism of root resorption is not completely understood. Inflammatory root resorption induced by orthodontic treatment is a part of process of elimination of hyaline zone. An imbalance between bone resorption and deposition may contribute to root resorption by the cementoclasts/osteoclasts. This narrative review article explains the molecular pathway involved in external apical root resorption and also role of various genes involved at different level. It also reviews the literature published during the past 20 years concerning the association studies linking EARR to genetic polymorphisms. This literature review provides an insight into genetic predisposition of external apical root resorption that can be used in orthodontic practice to enable 'high-risk' subjects to be identified on the basis of their genetic information before orthodontic treatment is initiated.

Comparison of Dentoskeletal Changes, Esthetic, and Functional Efficacy of Conventional and Novel Esthetic Twin Block Appliances among Class II Growing Patients: A Pilot Study

Objective

A twin block appliance used for correction of skeletal Class II malocclusion suffers from undesirable dental effects and bulkiness. To overcome these limitations and the need for more esthetic appearance of this appliance, an esthetic twin block was designed and used in patients. This study aimed to compare dentoskeletal changes and esthetic and functional efficacy in patients treated with conventional and newly designed esthetic twin block (CTB and ETB) appliances using cephalometric measurements and a questionnaire.

Methods

A pilot study with a 2-arm parallel-randomized double-blind clinical trial was conducted on 24 patients (20 males, 4 females) in the age group of 11-13 years. Subjects were treated with CTB (group 1 [G1]: n=12; mean age=11.67±0.49 years) and ETB (group 2 [G2]: n=12; mean age=11.75±0.62 years) appliances. A modified Pancherz analysis was performed to evaluate skeletal and dental changes. The esthetic and functional efficacy was evaluated by a questionnaire using Likert scale. Wilcoxon and Mann-Whitney U tests were employed for intra and intergroup comparisons respectively (p<0.05).

Results

In G1, a significant increase in lower incisor inclination was observed (p<0.05) whereas it was insignificant in G2. The changes were predominantly skeletal in G2 whereas they were both skeletal and dental in G1. ETB was found to be esthetically and functionally acceptable in all the patients while CTB patients were esthetically conscious, lacked confidence and had discomfort and difficulty in eating, chewing and speaking.

Conclusion

ETB had greater skeletal effects with a reduced tendency of lower incisor proclination, was esthetically acceptable, and functionally more comfortable than the CTB.

Management of skeletal Class III with facial asymmetry using skeletal anchorage: 4-year follow-up

Introduction:

Skeletal Class III malocclusion with asymmetry is one of the most difficult problems to correct in orthodontics. A functional shift of the mandible in growing patients may occur accompanying a Class III, due to constricted maxillary arch and occlusal interferences. Studies have indicated that posterior unilateral crossbite develops early and has a low rate of spontaneous correction. It may further lead to development of mandibular and facial asymmetry by growth and displacement of mandible if left untreated in growing patients.

Objective:

This article reports the clinical case of a thirteen-year-old female patient in CVMI transition stage that had maxillary hypoplasia with a developing facial asymmetry. Results: The case was successfully managed with bone-anchored facemask therapy and with elimination of occlusal interferences with guided occlusion. Reverse twin block in the retention phase maintained the results achieved.

Conclusion:

A four-year follow-up evaluation revealed successful maintenance of the treatment results.

A review of genetics of nasal development and morphological variation

The nose is central in the determination of facial esthetics. The variations in its structural characteristics greatly influence the ultimate dentoskeletal positioning at the end of an orthodontic therapy. A careful insight into its developmental etiology will greatly aid the health care professional in identifying patient's real concern about the facial appearance. This in turn will aid in the fabrication of a better treatment plan regarding the end placement goals for the teeth and jaws in all the three dimensions of space. However, this important structure is often missed as a part of the diagnostic and treatment planning regime owing to the lack of meticulous understanding of its developmental etiology by the orthodontists. The development of the nose in the embryo occurs in pre skeletal and skeletal phases by a well-coordinated and regulated interaction of multiple signaling cascades with the crucial importance of each factor in the entire mechanism. The five key factors, which control frontonasal development are sonic hedgehog (SHH), fibroblast growth factors (FGF), transforming growth factor β (TGFβ), wingless (WNT) proteins, and bone morphogenetic protein (BMP). The recent evidence suggests the association of various nasal dimensions and their related syndromes with multiple genes. The revelation of nasal genetic makeup in totality will aid in ascertaining the direction of growth, which will govern our orthodontic treatment results and will also act as a harbinger for potential genetic editing and tissue engineering. This article describes at length the morphological and genetic aspect of nasal growth and development in light of the gender and racial variability along with the emphasis on the importance of knowing these nasal features with regard to diagnosis and treatment planning in orthodontics.

Assessment of Treatment Outcome of Presurgical Nasoalveolar Molding in Patients With Cleft Lip and Palate and Its Postsurgical Stability

OBJECTIVE

To analyze the effects of presurgical nasoalveolar molding (PNAM) in newborns with cleft lip and palate and evaluate its postsurgical stability at 1-year follow-up using a nasal stent.

DESIGN

Prospective clinical trial.

SETTING

Department of Orthodontics, Maulana Azad Institute of Dental Sciences, Delhi.

PATIENTS

Patients with cleft lip and palate of 0 to 6 months. Sample size 25 recruited, 16 satisfactorily completed the procedure.

INTERVENTIONS

Presurgical nasoalveolar molding done as indicated in all the patients. Postsurgical external nasal stents were given for 1 year to maintain the nasal correction.

MAIN OUTCOME MEASURES

Changes in cleft defect and maxillary arch were recorded pre- and post-PNAM. Changes in nasal morphological parameters assessed pre- and post-PNAM and 1 year after surgical repair following the use of nasal stent.

RESULTS

There was a significant reduction in cleft defect assessed both intraorally ( 4.16 mm) and extra orally ( 4.42 mm) at the end of PNAM therapy (average treatment time 4 months). The nasal morphology improved with an increase in columella height (1.5 mm) and reduction in columella width. Bialar width reduced (2.90 mm) with an increase in nostril height ( 2.10 mm). Better symmetry was achieved in all cases as the nostril height and width difference changed significantly pre- and post-nasoalveolar molding. The percentage increase in columella height was greater for infants less than 6 weeks.

CONCLUSIONS

Presurgical nasoalveolar molding considerably reduces the cleft gap and improves arch form making surgical union easier along with improved nasal morphology which can be maintained at 1-year postsurgery by use of a postsurgical external nasal stent.

Separation and pain perception of Elastomeric, Kesling and Kansal separators

Introduction:

Various types of separators have been advocated, but the ideal separator should produce optimum separation with minimal pain and discomfort.

Objective:

The objective of this study was to evaluate and compare the amount of separation achieved by three different types of separators (Elastomeric, Kesling and Kansal), and to assess the associated pain and discomfort.

Methods:

A random single-blind split-mouth study was conducted on 108 patients seeking fixed orthodontic treatment, in which two different separators were used on each side in both the arches for a single patient. After five days, the amount of separation was measured with a feeler gauge. Visual Analogue Scale (VAS) scoring was performed by the patient on each day, to evaluate pain perception. Discomfort was evaluated by questionnaire filled by the patient at the time of separator removal.

Results:

The greatest amount of separation was seen with the elastomeric separators, while the smallest separation was seen with Kansal separators. VAS scoring showed maximum pain at day 1 with all the three separator types. Highest pain was perceived in the Elastomeric separators group, followed by Kesling and Kansal separators, respectively. Statistically significant difference was found in VAS score of Elastomeric separators, when compared to both Kesling and Kansal, on day 1 and 2 (p= 0.001). Analysis of the questionnaires revealed that a greater number of patients experienced discomfort with elastomeric separators placement (69.4%), which was statistically significant (p< 0.01) when compared to the other two types of separators. Answers to the other questions were comparable, except for the need for medications, which was reportedly highest with elastomeric separators.

Conclusion:

Kesling separators produce adequate separation with minimal discomfort and pain, compared to Elastomeric and Kansal separators.

Mini-implant-supported twin-block appliance: An innovative modification

Twin block is a commonly used appliance for correction of retrognathic mandible in growing patients. However, it has a drawback of causing lower incisor proclination, which reduces its potential of achieving maximum skeletal effects. Thus, we introduced a novel modification in the present design to facilitate greater anteroposterior effects in skeletal dimension. The aim of the present case reports is to evaluate the efficacy of this modified twin block. Here we present two cases treated with mini-implant-supported twin-block appliance, which successfully controlled the lower incisor position, thereby increasing the envelope for orthopedic correction in class II myofunctional therapy. This modification is useful in growing patients with retruded mandible to achieve maximum skeletal effects.

A Novel Minimally Invasive Technique of Using Tooth-Borne Hyrax Expansion Screw for Distraction Osteogenesis of Large Alveolar Cleft Defects (HYDIS-TB)

Because of the high failure rates, large alveolar cleft defects cannot be successfully closed with bone grafting. Vega introduced the use of the hyrax screw for the closure of such defects by distraction osteogenesis. However, his technique was more invasive with a difficult adaptation of the appliance at the surgical table. To overcome these limitations, a completely tooth-borne trifocal distraction appliance was devised and placed after osteotomy in a 22-year-old repaired group 3 cleft patient who had a 15-mm alveolar defect on the right side. The tooth-borne trifocal distraction appliance was successful in the controlled closure of a large alveolar cleft with minimal invasiveness and low costs making this procedure feasible for a greater number of patients.

Bone-specific alkaline phosphatase - a potential biomarker for skeletal growth assessment

OBJECTIVE

The present study was aimed to assess levels of serum Bone-specific alkaline phosphatase (BALP) and serum Insulin-like growth factor-1 (IGF-1) and comparing with cervical vertebral maturation index (CVMI) stages.

DESIGN

Cross-sectional study.

SETTING

Maulana Azad Institute of Dental Sciences, New Delhi, India.

PARTICIPANTS

150 subjects (75 males and 75 females) in the age group of 8-20 years.

METHODS

Subjects were divided into six CVMI stages. Enzyme-linked immunosorbant assay was performed for the estimation of serum BALP and serum IGF-1 levels. Mann-Whitney U test was performed to compare mean ranks of serum BALP and serum IGF-1 with different CVMI stages. Spearman correlation between serum BALP and serum IGF-1 was done across 6 CVMI stages.

RESULTS

Peak serum IGF-1 levels were found at CVMI stages 4 and 3 for males and females respectively. Peak levels for serum BALP were found at stage 3 for both genders with significant differences from other stages. A statistically significant correlation was seen between serum IGF-1 and serum BALP from CVMI stages 1 to 3 and 4 to 6 (p < .01).

CONCLUSIONS

BALP showed promising results and can be employed as a potential biomarker for the estimation of growth status.

Serum IGF-1, IGFBP-3 and their ratio: Potential biochemical growth maturity indicators

BACKGROUND

Determination of skeletal maturation and remaining growth potential is an essential part of treatment planning in orthodontics. The aim of our study was to determine the relationship between IGF-1 levels, IGFBP-3 levels with CVM staging to track the pre pubertal and pubertal growth spurts in female patients in North Indian population.

METHODS

This cross-sectional study was conducted on ninety female subjects in the age group of 8-20 years. Blood samples were collected and centrifuged and serum samples were then analysed by Human IGF-1 and IGFBP-3 enzyme-linked immunosorbent assay kits, specific for IGF-1 and IGFBP-3, respectively. CVM staging on lateral cephalometric radiograph was determined for all patients. Analysis of variance test followed by a post hoc test was used to compare mean IGF-1 and IGFBP-3 corresponding to six stages of cervical vertebrae maturation stages. Linear Pearson's correlations were performed to determine the trends of IGF-1, IGFBP-3, and its ratio relating to CVM stage. The kappa statistic was used to measure inter and intra examiner reliability. P value <0.05 was considered as statistically significant.

RESULTS

Mean serum IGF-1 levels were found to be highest (403.3 ± 12.3 ng/ml) at CVMI3 stage of CVMI. The post-hoc test revealed a significant difference in IGF-1 levels between all stages of CVMI, thereby indicating a specific range of IGF-1 levels for a specific skeletal stage. Mean serum IGFBP-3 levels were found to be highest (5186.8 ± 1384.2 ng/ml) at CVMI4 stage of CVMI. The mean serum IGFBP-3 levels at CVMI4 were found to be significantly higher than the levels at all other CVMI stages except CVMI3 stage.

CONCLUSIONS

IGF-1 and IGFBP-3 can serve as a potential biochemical indicator for assessment of skeletal maturity.

Osteocalcin and serum insulin-like growth factor-1 as biochemical skeletal maturity indicators

Background

With change in concepts of growth determination methods, there is a surge in the measurement of biomarkers for appraisal of growth status. Osteocalcin is a bone-specific protein and was observed to parallel the normal growth curve. Hence, the present study was intended to assess the levels of serum osteocalcin and serum insulin-like growth factor-1 (IGF-1) and compare them with cervical vertebral maturation index (CVMI) stages.

Methods

The cross-sectional study was performed on 150 subjects (75 males and 75 females) in the age group of 8–20 years and segregated into six CVMI stages. Serum osteocalcin and IGF-1 were estimated by ELISA. Mann-Whitney U test was used to compare the mean ranks of serum osteocalcin and serum IGF-1 with different CVMI stages. Spearman correlation was performed to find association between serum osteocalcin and serum IGF-1 across six CVMI stages.

Results

Peak serum IGF-1 levels were obtained at CVMI stages 4 and 3 for males and females, respectively, with insignificant difference between stages 3 and 4 in females. Peak serum osteocalcin levels were found at stage 5 and 3 for males and females with insignificant difference from other stages except stages 5 and 6 in males. A statistically significant correlation was seen between serum IGF-1 and serum osteocalcin across six CVMI stages (P < 0.01).

Conclusions

Osteocalcin followed IGF-1 across all CVMI stages but showed insignificant interstage differences.

SEM Evaluation of Enamel Surface Changes and Enamel Microhardness around Orthodontic Brackets after Application of CO2 Laser, Er,Cr:YSGG Laser and Fluoride Varnish: An In vivo Study

Introduction

One of the most undesirable consequences of orthodontic treatment is occurrence of enamel demineralization around orthodontic brackets. Numerous in vitro studies have reported the prevention of enamel demineralization by surface treatment with lasers and fluoride varnish.

Aim

To evaluate the changes on the enamel surface and microhardness around orthodontic brackets after surface treatment by CO₂ laser, Er, Cr:YSGG laser and fluoride varnish in vivo.

Materials and Methods

A double blind interventional study was carried out on 100 premolars which were equally divided into five groups, out of which one was the control group (Group 0). The intervention groups (Group I to IV) comprised of patients requiring fixed orthodontic treatment with all 4 first premolars extraction. Brackets were bonded on all 80 premolars which were to be extracted. Enamel surface treatment of Groups I, II and III was done by CO₂ laser, Er, Cr:YSGG laser and 5% sodium fluoride varnish respectively and Group IV did not receive any surface treatment. A modified T-loop was ligated to the bracket and after two months, the premolars were extracted. Surface changes were evaluated by Scanning Electron Microscopic (SEM) and microhardness testing. Comparison of mean microhardness between all the groups was assessed using post-hoc test with Bonferroni correction.

Results

Group I showed a melted enamel appearance with fine cracks and fissures while Group II showed a glossy, homogenous enamel surface with well coalesced enamel rods. Group III showed slight areas of erosions and Group IV presented areas of stripped enamel. Significant difference was observed between the mean microhardness (VHN) of Group I, Group II, Group III, Group IV and Group 0 with p<0.001. A significant difference of p<0.001 was observed while comparing Group I vs II,III,IV,0 and Group II vs III,IV,0. However, difference while comparing Group III vs IV was p=0.005 and difference between the mean microhardness of Group 0 vs Group III was non significant.

Conclusion

Surface treatment with Er,Cr:YSGG laser causes a positive alteration of the enamel surface increasing its ability to resist demineralization with optimum microhardness as compared to CO₂ laser and sodium fluoride varnish.

Prospective Evaluation of Psychosocial Impact after One Year of Orthodontic Treatment Using PIDAQ Adapted for Indian Population

INTRODUCTION

The impact of dental appearance, malocclusion and treatment for the same on psychological and functional well-being has drawn increasing attention over the past decade. Various psychometric instruments alongside normative indices have been used to predict orthodontic concerns. Evaluating the patients' experience during the orthodontic treatment can help us understand the true benefits and advantages of orthodontic therapy.

AIM

The aim of the present study was to evaluate the change in the psychosocial impact of malocclusion using the Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ) adapted for the Indian population after one year of fixed orthodontic treatment.

MATERIALS AND METHODS

This interventional study was conducted on 93 patients requiring fixed orthodontic treatment. Brazilian, Chinese, Spanish, Nepali and Moroccan versions of the PIDAQ have been published but the questionnaire is not available in Hindi. In the present study, the original PIDAQ was translated into Hindi language to adapt it for the Indian population and was validated by back translation and pretest. All the subjects answered the Hindi version of the questionnaire at pretreatment (T1) and at one year of orthodontic treatment (T2). Additionally, the Index of Orthodontic Treatment Need (IOTN) was applied to measure the severity and self-perception of malocclusion. The data were analysed using paired t-test, Wilcoxon signed rank test and Kruskal-Wallis test.

RESULTS

Significant reduction was found in the total PIDAQ score and each factor's score (p<0.001) after one year of orthodontic treatment. There was a positive association of the psychosocial impact of malocclusion with the IOTN-AC (IOTN-Aesthetic Component). Adolescent females were found to be most concerned with their dentofacial appearance.

CONCLUSION

Results showed significant improvement in the psychosocial impact of malocclusion with a reduction in the self-perceived needs of patients with orthodontic treatment. The psychometric instrument used may be recommended as an Oral Health Related Quality of Life (OHRQoL) assessment tool for the population in India for further research.

Molar distalization with 2K appliance: one-year follow-up

Correction of class II molars in growing patients with acceptable facial profile can be performed by distalization of maxillary first molars. However, in patients where compliance is difficult intraoral means of molar distalization is required. This case report describes the use and effectiveness of a novel 2K appliance in an 11-year-old female having an orthognathic profile, skeletal Class I relation, and Angle's Class II division 1 malocclusion with crowding of 8 mm and 3 mm in the maxillary and mandibular arches, respectively. Nonextraction treatment was planned with bilateral distalization of the maxillary first molars. The amount of distalization achieved by 2K appliance was 3.5 mm with only 1° distal tipping. The 2K appliance required minimal patient cooperation, produced bodily movement of molars with minimal tipping/rotation, and prevented anchorage loss of the anterior teeth. This 2K molar distalization appliance was found to be an effective technique to control molars in all three planes of space.

A Custom Made Skeletal Class II Corrector Appliance in Late Adolescent Phase

Skeletal Class II correction in deceleration phase of growth is both a challenge and dilemma with choice between extraction and myofunctional therapy. With marginal growth remaining the convenient choice is extraction for camouflage of the skeletal discrepancy. On the other hand, the treatment with Fixed Functional Appliances (FFAs) helps in resolution of the problem without sacrificing the dentition. However, the conventional FFAs requires a phase of alignment which results in further loss of time to utilize any remaining growth. The present report proposes the use of a novel custom made functional appliance for Class II skeletal correction which is simple to fabricate and convenient to use.

Serum and urine insulin-like growth factor-1 as biochemical growth maturity indicators

INTRODUCTION

Biochemical markers are agents directly involved in bone growth and remodeling and can be quantitatively evaluated from various biologic fluids. The aim of this study was to assess the changes in the levels of insulin-like growth factor-1 (IGF-1) in serum and urine as a growth maturity indicator and to compare them with the cervical vertebral maturation radiographic stages.

METHODS

The study was conducted with 72 female subjects aged 8 to 20 years. Cervical vertebral maturation stages, and serum and urine IGF-1 levels were recorded for all subjects, and the subjects were equally divided into the 6 cervical vertebral maturation groups. Median values of IGF-1 for each stage of cervical vertebral maturation were calculated and statistically compared with those of the other stages.

RESULTS

The levels of serum and urine IGF-1 at stage 4 of cervical vertebral maturation were significantly higher than those from the other stages (P <0.01). Stage 4 corresponded to a mean age of 13.67 years. A significant correlation was observed between serum and urine IGF-1 (P <0.001).

CONCLUSIONS

Urine IGF-1 follows the growth curve similar to serum IGF-1. Thus, urine IGF-1 may be regarded as a promising noninvasive tool for growth assessment. Further research is necessary to validate these results in a different population and with a larger sample.