Nonlinear mechanics of lamin filaments and the meshwork topology build an emergent nuclear lamina

The nuclear lamina—a meshwork of intermediate filaments termed lamins—is primarily responsible for the mechanical stability of the nucleus in multicellular organisms. However, structural-mechanical characterization of lamin filaments assembled in situ remains elusive. Here, we apply an integrative approach combining atomic force microscopy, cryo-electron tomography, network analysis, and molecular dynamics simulations to directly measure the mechanical response of single lamin filaments in three-dimensional meshwork. Endogenous lamin filaments portray non-Hookean behavior – they deform reversibly at a few hundred picoNewtons and stiffen at nanoNewton forces. The filaments are extensible, strong and tough similar to natural silk and superior to the synthetic polymer Kevlar^®. Graph theory analysis shows that the lamin meshwork is not a random arrangement of filaments but exhibits small-world properties. Our results suggest that lamin filaments arrange to form an emergent meshwork whose topology dictates the mechanical properties of individual filaments. The quantitative insights imply a role of meshwork topology in laminopathies.

Mechanical strength of in situ assembled nuclear lamin filaments arranged in a 3D meshwork is unclear. Here, using mechanical, structural and simulation tools, the authors report the hierarchical organization of the lamin meshwork that imparts strength and toughness to lamin filaments at par with silk and Kevlar^®

Assembly Kinetics of Vimentin Tetramers to Unit-Length Filaments: A Stopped-Flow Study

Intermediate filaments (IFs) are principal components of the cytoskeleton, a dynamic integrated system of structural proteins that provides the functional architecture of metazoan cells. They are major contributors to the elasticity of cells and tissues due to their high mechanical stability and intrinsic flexibility. The basic building block for the assembly of IFs is a rod-like, 60-nm-long tetrameric complex made from two antiparallel, half-staggered coiled coils. In low ionic strength, tetramers form stable complexes that rapidly assemble into filaments upon raising the ionic strength. The first assembly products, "frozen" by instantaneous chemical fixation and viewed by electron microscopy, are 60-nm-long "unit-length" filaments (ULFs) that apparently form by lateral in-register association of tetramers. ULFs are the active elements of IF growth, undergoing longitudinal end-to-end annealing with one another and with growing filaments. Originally, we have employed quantitative time-lapse atomic force and electron microscopy to analyze the kinetics of vimentin-filament assembly starting from a few seconds to several hours. To obtain detailed quantitative insight into the productive reactions that drive ULF formation, we now introduce a "stopped-flow" approach in combination with static light-scattering measurements. Thereby, we determine the basic rate constants for lateral assembly of tetramers to ULFs. Processing of the recorded data by a global fitting procedure enables us to describe the hierarchical steps of IF formation. Specifically, we propose that tetramers are consumed within milliseconds to yield octamers that are obligatory intermediates toward ULF formation. Although the interaction of tetramers is diffusion controlled, it is strongly driven by their geometry to mediate effective subunit targeting. Importantly, our model conclusively reflects the previously described occurrence of polymorphic ULF and mature filaments in terms of their number of tetramers per cross section.

Intermediate Filaments: Structure and Assembly

Proteins of the intermediate filament (IF) supergene family are ubiquitous structural components that comprise, in a cell type-specific manner, the cytoskeleton proper in animal tissues. All IF proteins show a distinctly organized, extended α-helical conformation prone to form two-stranded coiled coils, which are the basic building blocks of these highly flexible, stress-resistant cytoskeletal filaments. IF proteins are highly charged, thus representing versatile polyampholytes with multiple functions. Taking vimentin, keratins, and the nuclear lamins as our prime examples, we present an overview of their molecular and structural parameters. These, in turn, document the ability of IF proteins to form distinct, highly diverse supramolecular assemblies and biomaterials found, for example, at the inner nuclear membrane, throughout the cytoplasm, and in highly complex extracellular appendages, such as hair and nails, of vertebrate organisms. Ultimately, our aim is to set the stage for a more rational understanding of the immediate effects that missense mutations in IF genes have on cellular functions and for their far-reaching impact on the development of the numerous IF diseases caused by them.

Contributions of the lower dimer to supramolecular actin patterning revealed by TIRF microscopy

Two distinct dimers are formed during the initial steps of actin polymerization. The first one, referred to as the 'lower dimer' (LD) was discovered many years ago by means of chemical crosslinking. Owing to its transient nature, a biological relevance had long been precluded when, using LD-specific antibodies, we detected LD-like contacts in actin assemblies that are associated with the endolysosomal compartment in a number of different cell lines. Moreover, immunofluorescence showed the presence of LD-related structures at the cell periphery of migrating fibroblasts, in the nucleus, and in association with the centrosome of interphase cells. Here, we explore contributions of the LD to the assembly of supramolecular actin structures in real time by total internal reflection fluorescence (TIRF) microscopy. Our data shows that while LD on its own cannot polymerize under filament forming conditions, it is able to incorporate into growing F-actin filaments. This incorporation of LD triggers the formation of X-shaped filament assemblies with barbed ends that are pointing in the same direction in the majority of cases. Similarly, an increased frequency of junction sites was observed when filaments were assembled in the presence of oxidized actin. This data suggests that a disulfide bridge between Cys374 residues might stabilize LD-contacts. Based on our findings, we propose two possible models for the molecular mechanism underlying the supramolecular actin patterning in LD-related structures.

Intermediate filaments: a dynamic network that controls cell mechanics

In humans the superfamily of intermediate filament (IF) proteins is encoded by more than 70 different genes, which are expressed in a cell- and tissue-specific manner. IFs assemble into approximately 10 nm-wide filaments that account for the principal structural elements at the nuclear periphery, nucleoplasm, and cytoplasm. They are also required for organizing the microtubule and microfilament networks. In this review, we focus on the dynamics of IFs and how modifications regulate it. We also discuss the role of nuclear IF organization in determining nuclear mechanics as well as that of cytoplasmic IFs organization in maintaining cell stiffness, formation of lamellipodia, regulation of cell migration, and permitting cell adhesion.

The biodistribution of self-assembling protein nanoparticles shows they are promising vaccine platforms

BACKGROUND

Because of the need to limit side-effects, nanoparticles are increasingly being studied as drug-carrying and targeting tools. We have previously reported on a scheme to produce protein-based self-assembling nanoparticles that can act as antigen display platforms. Here we attempted to use the same system for cancer-targeting, making use of a C-terminal bombesin peptide that has high affinity for a receptor known to be overexpressed in certain tumors, as well as an N-terminal polyhistidine tag that can be used for radiolabeling with technetium tricarbonyl.

RESULTS

In order to increase circulation time, we experimented with PEGylated and unPEGylated varities typo particle. We also tested the effect of incorporating different numbers of bombesins per nanoparticle. Biophysical characterization determined that all configurations assemble into regular particles with relatively monodisperse size distributions, having peaks of about 33-36 nm. The carbonyl method used for labeling produced approximately 80% labeled nanoparticles. In vitro, the nanoparticles showed high binding, both specific and non-specific, to PC-3 prostate cancer cells. In vivo, high uptake was observed for all nanoparticle types in the spleens of CD-1 nu/nu mice, decreasing significantly over the course of 24 hours. High uptake was also observed in the liver, while only low uptake was seen in both the pancreas and a tumor xenograft.

CONCLUSIONS

The data suggest that the nanoparticles are non-specifically taken up by the reticuloendothelial system. Low uptake in the pancreas and tumor indicate that there is little or no specific targeting. PEGylation or increasing the amount of bombesins per nanoparticle did not significantly improve targeting. In particular, the uptake in the spleen, which is a primary organ of the immune system, highlights the potential of the nanoparticles as vaccine carriers. Also, the decrease in liver and spleen radioactivity with time implies that the nanoparticles are broken down and cleared. This is an important finding, as it shows that the nanoparticles can be safely used as a vaccine platform without the risk of prolonged side effects. Furthermore, it demonstrates that technetium carbonyl radiolabeling of our protein-based nanoparticles can be used to evaluate their pharmacokinetic properties in vivo.

The nanomechanical signature of breast cancer

Cancer initiation and progression follow complex molecular and structural changes in the extracellular matrix and cellular architecture of living tissue. However, it remains poorly understood how the transformation from health to malignancy alters the mechanical properties of cells within the tumour microenvironment. Here, we show using an indentation-type atomic force microscope (IT-AFM) that unadulterated human breast biopsies display distinct stiffness profiles. Correlative stiffness maps obtained on normal and benign tissues show uniform stiffness profiles that are characterized by a single distinct peak. In contrast, malignant tissues have a broad distribution resulting from tissue heterogeneity, with a prominent low-stiffness peak representative of cancer cells. Similar findings are seen in specific stages of breast cancer in MMTV-PyMT transgenic mice. Further evidence obtained from the lungs of mice with late-stage tumours shows that migration and metastatic spreading is correlated to the low stiffness of hypoxia-associated cancer cells. Overall, nanomechanical profiling by IT-AFM provides quantitative indicators in the clinical diagnostics of breast cancer with translational significance.

Sliding motion modulates stiffness and friction coefficient at the surface of tissue engineered cartilage

OBJECTIVE

Functional cartilage tissue engineering aims to generate grafts with a functional surface, similar to that of authentic cartilage. Bioreactors that stimulate cell-scaffold constructs by simulating natural joint movements hold great potential to generate cartilage with adequate surface properties. In this study two methods based on atomic force microscopy (AFM) were applied to obtain information about the quality of engineered graft surfaces. For better understanding of the molecule-function relationships, AFM was complemented with immunohistochemistry.

METHODS

Bovine chondrocytes were seeded into polyurethane scaffolds and subjected to dynamic compression, applied by a ceramic ball, for 1h daily [loading group 1 (LG1)]. In loading group 2 (LG2), the ball additionally oscillated over the scaffold, generating sliding surface motion. After 3 weeks, the surfaces of the engineered constructs were analyzed by friction force and indentation-type AFM (IT-AFM). Results were complemented and compared to immunohistochemical analyses.

RESULTS

The loading type significantly influenced the mechanical and histological outcomes. Constructs of LG2 exhibited lowest friction coefficient and highest micro- and nanostiffness. Collagen type II and aggrecan staining were readily observed in all constructs and appeared to reach deeper areas in loaded (LG1, LG2) compared to unloaded scaffolds. Lubricin was specifically detected at the top surface of LG2.

CONCLUSIONS

This study proposes a quantitative AFM-based functional analysis at the micrometer- and nanometer scale to evaluate the quality of cartilage surfaces. Mechanical testing (load-bearing) combined with friction analysis (gliding) can provide important information. Notably, sliding-type biomechanical stimuli may favor (re-)generation and maintenance of functional articular surfaces and support the development of mechanically competent engineered cartilage.

Lamin A and lamin C form homodimers and coexist in higher complex forms both in the nucleoplasmic fraction and in the lamina of cultured human cells

We have investigated and quantified the nuclear A-type lamin pool from human HeLa S3 suspension cells with respect to their distribution to detergent soluble and insoluble fractions. We devised a sequential extraction protocol and found that maximally 10% of A-type lamins are recovered in the soluble fraction. Notably, lamin C is enriched in low detergent fractions and only with 0.5% Nonidet P-40 lamin A and C are recovered in ratios nearly equivalent to those found in whole cell extracts and in the lamina fraction. Authentic nucleoplasmic proteins such as LAP2a, pRB and p53 are co-extracted to a large part together with the A-type lamins in these fractions. By sucrose density centrifugation we revealed that the majority of lamins co-sedimented with human IgG indicating they form rather small complexes in the range of dimers and slightly larger complexes. Some lamin A - but not lamin C - is obtained in addition in a much faster sedimenting fraction. Authentic nuclear proteins such as PCNA, p53 and LAP2a were found both in the light and the heavy sucrose fractions together with lamin A. Last but not least, immunoprecipitation experiments from both soluble fractions and from RIPA lysates of whole cells revealed that lamin A and lamin C do not form heterodimers but segregate practically completely. Correspondingly, immunofluorescence microscopy of formaldehyde-fixed cells clearly demonstrated that lamin A and C are localized at least in part to distinct patches within the lamina. Hence, the structural segregation of lamin A and C is indeed retained in the nuclear envelope to some extent too.

Complex formation and kinetics of filament assembly exhibited by the simple epithelial keratins K8 and K18

We have generated human recombinant keratins K8 and K18 and describe conditions to quantitatively follow their assembly into filaments. When renatured individually from 8M urea into a low ionic strength/high pH-buffer, K8 was present in a dimeric to tetrameric form as revealed by analytical ultracentrifugation. In contrast, K18 sedimented as a monomer. When mixed in 8 M urea and renatured together, K8 and K18 exhibited s-value profiles compatible with homogeneous tetrameric complexes. This finding was confirmed by sedimentation equilibrium centrifugation. Subsequently, these tetrameric starter units were subjected to assembly experiments at various protein concentrations. At low values such as 0.0025 g/l, unit-length filaments were abundantly present after 2s of assembly. During the following 5 min, filaments grew rapidly and by measuring the length of individual filaments we were able to generate time-dependent length profiles. These data revealed that keratins K8/K18 assemble several times faster than vimentin and desmin. In addition, we determined the persistence length l(p) of K8/K18 filaments to be in the range of 300 nm. Addition of 1 mM MgCl(2) increases l(p) to 480 nm indicating that magnesium ions affect the interaction of keratin subunits within the filament during assembly to some extent.

An antiparallel actin dimer is associated with the endocytic pathway in mammalian cells

The dynamic rearrangement of the actin cytoskeleton plays a key role in several cellular processes such as cell motility, endocytosis, RNA processing and chromatin organization. However, the supramolecular actin structures involved in the different processes remain largely unknown. One of the less studied forms of actin is the lower dimer (LD). This unconventional arrangement of two actin molecules in an antiparallel orientation can be detected by chemical crosslinking at the onset of polymerization in vitro. Moreover, evidence for a transient incorporation of LD into growing filaments and its ability to inhibit nucleation of F-actin filament assembly implicate that the LD pathway contributes to supramolecular actin patterning. However, a clear link from this actin species to a specific cellular function has not yet been established. We have developed an antibody that selectively binds to LD configurations in supramolecular actin structures assembled in vitro. This antibody allowed us to unveil the LD in different mammalian cells. In particular, we show an association of the antiparallel actin arrangement with the endocytic compartment at the cellular and ultrastructural level. Taken together, our results strongly support a functional role of LD in the patterning of supramolecular actin assemblies in mammalian cells.

Vimentin organization modulates the formation of lamellipodia

The disassembly and withdrawal of vimentin intermediate filaments (VIF) from the plasma membrane induces membrane ruffling and the formation of a lamellipodium. Conversely, lamellipodium formation is inhibited when VIF are present.

Vimentin intermediate filaments (VIF) extend throughout the rear and perinuclear regions of migrating fibroblasts, but only nonfilamentous vimentin particles are present in lamellipodial regions. In contrast, VIF networks extend to the entire cell periphery in serum-starved or nonmotile fibroblasts. Upon serum addition or activation of Rac1, VIF are rapidly phosphorylated at Ser-38, a p21-activated kinase phosphorylation site. This phosphorylation of vimentin is coincident with VIF disassembly at and retraction from the cell surface where lamellipodia form. Furthermore, local induction of photoactivatable Rac1 or the microinjection of a vimentin mimetic peptide (2B2) disassemble VIF at sites where lamellipodia subsequently form. When vimentin organization is disrupted by a dominant-negative mutant or by silencing, there is a loss of polarity, as evidenced by the formation of lamellipodia encircling the entire cell, as well as reduced cell motility. These findings demonstrate an antagonistic relationship between VIF and the formation of lamellipodia.

An RGD-restricted substrate interface is sufficient for the adhesion, growth and cartilage forming capacity of human chondrocytes

This study aimed at testing whether an RGD-restricted substrate interface is sufficient for adhesion and growth of human articular chondrocytes (HAC), and whether it enhances their post expansion chondrogenic capacity. HAC/substrate interaction was restricted to RGD by modifying tissue culture polystyrene (TCPS) with a poly(ethylene glycol) (PEG) based copolymer system that renders the surface resistant to protein adsorption while at the same time presenting the bioactive RGD-containing peptide GCRGYGRGDSPG (RGD). As compared to TCPS, HAC cultured on RGD spread faster (1.9-fold), maintained higher type II collagen mRNA expression (4.9-fold) and displayed a 19% lower spreading area. On RGD, HAC attachment efficiency (66±10%) and proliferation rate (0.56±0.04 doublings/day), as well as type II collagen mRNA expression in the subsequent chondrogenic differentiation phase, were similar to those of cells cultured on TCPS. In contrast, cartilaginous matrix deposition by HAC expanded on RGD was slightly but consistently higher (15% higher glycosaminoglycan-to-DNA ratio). RDG (bioinactive peptide) and PEG (no peptide ligand) controls yielded drastically reduced attachment efficiency (lower than 11%) and proliferation (lower than 0.20 doublings/day). Collectively, these data indicate that restriction of HAC interaction with a substrate through RGD peptides is sufficient to support their adhesion, growth and maintenance of cartilage forming capacity. The concept could thus be implemented in materials for cartilage repair, whereby in situ recruited/infiltrated chondroprogenitor cells would proliferate while maintaining their ability to differentiate and generate cartilage tissue.

Fast quantitative single-molecule detection at ultralow concentrations

The applicability of single-molecule fluorescence assays in liquids is limited by diffusion to concentrations in the low picomolar range. Here, we demonstrate quantitative single-molecule detection at attomolar concentrations within 1 min by excitation and detection of fluorescence through a single-mode optical fiber in presence of turbulent flow. The combination of high detectability and short measurement times promises applications in ultrasensitive assays, sensors, and point-of-care medical diagnostics.

Imaging articular cartilage tissue using atomic force microscopy (AFM)

Cartilage is a complex avascular tissue composed of cells ("chondrocytes") embedded in an extracellular matrix (ECM) consisting of 70%-80% water. The primary components of the ECM are negatively charged aggrecans and collagen II fibrils, which possess a characteristic, ordered three-dimensional structure. The components interact to ensure that the cartilage is able to absorb shock and can function to protect the bone ends. Atomic force microscopy (AFM) can be used to examine structure-function relationships of cartilage at both micrometer and nanometer scales. When imaged at the micrometer scale with microspheres, only the ECM and chondrocytes can be distinguished. Correspondingly, mechanical testing of cartilage at the micrometer scale results in unimodal distribution of the stiffness because the bulk elastic property of the ECM is probed. In contrast, bare AFM tips are able to reveal the molecular components of the ECM at the nanometer scale. Mechanical testing at the nanometer scale reveals a bimodal distribution of the stiffness and reflects the distinct stiffness of the collagen network and the proteoglycan moiety. In this protocol, the corresponding AFM image and force map are used to reveal the distinct morphology of the collagen fibers and proteoglycan gel. Although, in principle, these experiments can be performed using any AFM, an AFM with tube scanners that have manual screws for tilting the sample is preferable because cartilage has macroscopically rough surface features. By manually tilting the probe over the sample, an optimal angle for tip approach can be achieved.

Preparation of microsphere tips for atomic force microscopy (AFM)

This protocol describes the preparation and use of spherical indenters for micrometer-scale imaging and mechanical testing with atomic force microscopy (AFM). A spherical indenter is prepared by gluing a hard borosilicate sphere to a tipless cantilever. For this purpose, a stereomicroscope with a micromanipulator attachment is employed. The spheres are cleaned prior to gluing to remove any contamination from their surfaces. Once they are cleaned, the borosilicate spheres are stored in absolute ethanol in a glass tube.

Atomic force microscopy for biological imaging and mechanical testing across length scales

Atomic force microscopy (AFM) offers researchers a unique opportunity to visualize, manipulate, and quantitatively assess structural and mechanical aspects of native biological samples with nanometer resolution. An unparalleled advantage of AFM over other high-resolution microscopes is that biological specimens, ranging from tissues to cells to molecules, can be investigated in physiologically relevant aqueous environments. The AFM can be operated at 37°C, which makes it ideal for in situ cell or tissue studies. Combining an optical microscope with an AFM makes it possible to directly correlate structural/nanomechanical changes with optical/fluorescence images. This ability to simultaneously acquire structural and function information is unprecedented in biology. This article introduces the basics of AFM for imaging and investigating the properties of biological samples.

Imaging collagen II using atomic force microscopy (AFM)

Collagen II is a fibrous protein that assembles from basic tropocollagen subunits to form extracellular supramolecular fiber networks within cartilage tissue. Tropocollagen subunits of ~300 nm in length self-assemble first into pentameric uniform microfibrils, which fuse into bigger collagen fibrils that can range from 10 nm to 500 nm in diameter. The collagen fibrils display a characteristic 67-nm repeat because of the staggering of individual collagen molecules with respect to each other. This protocol demonstrates how to prepare collagen protein samples for analysis by atomic force microscopy (AFM). It also describes the steps for generating AFM images of collagen samples during and after manipulation to analyze collagen self-assembly.

Imaging fibroblast cells using atomic force microscopy (AFM)

Atomic force microscopy (AFM) can be used to visualize the three major cytoskeletal components that contribute to the mechanical properties of the cell. These are actin microfilaments, intermediate filaments, and microtubules. In this protocol, rat embryonic fibroblasts expressing actin tagged with green fluorescent protein (GFP) are used to demonstrate this procedure.

Amyloid structure and assembly: insights from scanning transmission electron microscopy

Amyloid fibrils are filamentous protein aggregates implicated in several common diseases such as Alzheimer's disease and type II diabetes. Similar structures are also the molecular principle of the infectious spongiform encephalopathies such as Creutzfeldt-Jakob disease in humans, scrapie in sheep, and of the so-called yeast prions, inherited non-chromosomal elements found in yeast and fungi. Scanning transmission electron microscopy (STEM) is often used to delineate the assembly mechanism and structural properties of amyloid aggregates. In this review we consider specifically contributions and limitations of STEM for the investigation of amyloid assembly pathways, fibril polymorphisms and structural models of amyloid fibrils. This type of microscopy provides the only method to directly measure the mass-per-length (MPL) of individual filaments. Made on both in vitro assembled and ex vivo samples, STEM mass measurements have illuminated the hierarchical relationships between amyloid fibrils and revealed that polymorphic fibrils and various globular oligomers can assemble simultaneously from a single polypeptide. The MPLs also impose strong constraints on possible packing schemes, assisting in molecular model building when combined with high-resolution methods like solid-state nuclear magnetic resonance (NMR) and electron paramagnetic resonance (EPR).

Micro- and nanomechanical analysis of articular cartilage by indentation-type atomic force microscopy: validation with a gel-microfiber composite

As documented previously, articular cartilage exhibits a scale-dependent dynamic stiffness when probed by indentation-type atomic force microscopy (IT-AFM). In this study, a micrometer-size spherical tip revealed an unimodal stiffness distribution (which we refer to as microstiffness), whereas probing articular cartilage with a nanometer-size pyramidal tip resulted in a bimodal nanostiffness distribution. We concluded that indentation of the cartilage's soft proteoglycan (PG) gel gave rise to the lower nanostiffness peak, whereas deformation of its collagen fibrils yielded the higher nanostiffness peak. To test our hypothesis, we produced a gel-microfiber composite consisting of a chondroitin sulfate-containing agarose gel and a fibrillar poly(ethylene glycol)-terephthalate/poly(butylene)-terephthalate block copolymer. In striking analogy to articular cartilage, the microstiffness distribution of the synthetic composite was unimodal, whereas its nanostiffness exhibited a bimodal distribution. Also, similar to the case with cartilage, addition of the negatively charged chondroitin sulfate rendered the gel-microfiber composite's water content responsive to salt. When the ionic strength of the surrounding buffer solution increased from 0.15 to 2 M NaCl, the cartilage's microstiffness increased by 21%, whereas that of the synthetic biomaterial went up by 31%. When the nanostiffness was measured after the ionic strength was raised by the same amount, the cartilage's lower peak increased by 28%, whereas that of the synthetic biomaterial went up by 34%. Of interest, the higher peak values remained unchanged for both materials. Taken together, these results demonstrate that the nanoscale lower peak is a measure of the soft PG gel, and the nanoscale higher peak measures collagen fibril stiffness. In contrast, the micrometer-scale measurements fail to resolve separate stiffness values for the PG and collagen fibril moieties. Therefore, we propose to use nanostiffness as a new biomarker to analyze structure-function relationships in normal, diseased, and engineered cartilage.

Characterization of the head-to-tail overlap complexes formed by human lamin A, B1 and B2 "half-minilamin" dimers

Half-minilamins, representing amino- and carboxy-terminal fragments of human lamins A, B1 and B2 with a truncated central rod domain, were investigated for their ability to form distinct head-to-tail-type dimer complexes. This mode of interaction represents an essential step in the longitudinal assembly reaction exhibited by full-length lamin dimers. As determined by analytical ultracentrifugation, the amino-terminal fragments were soluble under low ionic strength conditions sedimenting with distinct profiles and s-values (1.6-1.8 S) indicating the formation of coiled-coil dimers. The smaller carboxy-terminal fragments were, except for lamin B2, largely insoluble under these conditions. However, after equimolar amounts of homotypic amino- and carboxy-terminal lamin fragments had been mixed in 4 M urea, upon subsequent renaturation the carboxy-terminal fragments were completely rescued from precipitation and distinct soluble complexes with higher s-values (2.3-2.7 S) were obtained. From this behavior, we conclude that the amino- and carboxy-terminal coiled-coil dimers interact to form distinct oligomers (i.e. tetramers). Furthermore, a corresponding interaction occurred also between heterotypic pairs of A- and B-type lamin fragments. Hence, A-type lamin dimers may interact with B-type lamin dimers head-to-tail to yield linear polymers. These findings indicate that a lamin dimer principally has the freedom for a "combinatorial" head-to-tail association with all types of lamins, a property that might be of significant importance for the assembly of the nuclear lamina. Furthermore, we suggest that the head-to-tail interaction of the rod end domains represents a principal step in the assembly of cytoplasmic intermediate filament proteins too.

Atomic structure of vimentin coil 2

Intermediate filaments (IFs) are essential cytoskeletal components in metazoan cells. They assemble from elementary dimers that are built around the central alpha-helical coiled-coil rod domain representing the IF 'signature'. The rod consists of two similarly-sized parts, coil 1 and coil 2, connected by a non-alpha-helical linker L12. Coil 2 is absolutely conserved in length across all IF types and was initially predicted to consist of a short coiled-coil segment 2A based on a heptad pattern of hydrophobic residues, another linker L2 and a coiled-coil segment 2B. Here we present the crystal structure of human vimentin fragment including residues 261-335 i.e. approximately the first half of coil 2. The N-terminal part of this fragment reveals a parallel alpha-helical bundle characterized by 3.5 consecutive hendecad repeats. It is immediately followed by a regular left-handed coiled coil. The distinct non-helical linker L2 is therefore not observed. Together with the previously determined crystal structure of the major part of segment 2B (Strelkov et al., 2002), we can now build a complete atomic model of the 21nm long vimentin coil 2 dimer being a relatively rigid rod.

A nonadjuvanted polypeptide nanoparticle vaccine confers long-lasting protection against rodent malaria

We have designed and produced a prototypic malaria vaccine based on a highly versatile self-assembling polypeptide nanoparticle (SAPN) platform that can repetitively display antigenic epitopes. We used this platform to display a tandem repeat of the B cell immunodominant repeat epitope (DPPPPNPN)(2)D of the malaria parasite Plasmodium berghei circumsporozoite protein. Administered in saline, without the need for a heterologous adjuvant, the SAPN construct P4c-Mal conferred a long-lived, protective immune response to mice with a broad range of genetically distinct immune backgrounds including the H-2(b), H-2(d), and H-2(k) alleles. Immunized mice produced a CD4(+) T cell-dependent, high-titer, long-lasting, high-avidity Ab response against the B cell epitope. Mice were protected against an initial challenge of parasites up to 6 mo after the last immunization or for up to 15 mo against a second challenge after an initial challenge of parasites had successfully been cleared. Furthermore, we demonstrate that the SAPN platform not only functions to deliver an ordered repetitive array of B cell peptide epitopes but operates as a classical immunological carrier to provide cognate help to the P4c-Mal-specific B cells.

Structural analysis of a metazoan nuclear pore complex reveals a fused concentric ring architecture

The sole gateway for molecular exchange between the cytoplasm and the nucleus is the nuclear pore complex (NPC). This large supramolecular assembly mediates transport of cargo into and out of the nucleus and fuse the inner and outer nuclear membranes to form an aqueous translocation channel. The NPC is composed of eight proteinaceous asymmetric units forming a pseudo-8-fold symmetric passage. Due to its shear size, complexity, and plastic nature, dissecting the high-resolution three-dimensional structure of the NPC in its hydrated state is a formidable challenge. Toward this goal, we applied cryo-electron tomography to spread nuclear envelopes from Xenopus oocytes. To compensate for perturbations of the 8-fold symmetry of individual NPCs, we performed symmetry-independent asymmetric unit averaging of three-dimensional tomographic NPC volumes to eventually yield a refined model at 6.4 nm resolution. This approach revealed novel structural features, particularly in the spoke-ring complex and luminal domains. Fused concentric ring architecture of the spoke-ring complex was found along the translocation channel. Additionally, a comparison of the refined Xenopus model to that of its Dictyostelium homologue yielded similar pore diameters at the level of the three canonical rings, although the Xenopus NPC was found to be 30% taller than the Dictyostelium pore. This discrepancy is attributed primarily to the relatively low homology and different organization of some nucleoporins in the Dictyostelium genome as compared to that of vertebrates. Nevertheless, the experimental conditions impose a preferred axial orientation of the NPCs within spread Xenopus oocyte nuclear envelopes. This may at least in part explain the increased height of the reconstructed vertebrate NPCs compared to those obtained from tomographic reconstruction of intact Dictyostelium nuclei.

Intermediate filaments: primary determinants of cell architecture and plasticity

Intermediate filaments (IFs) are major constituents of the cytoskeleton and nuclear boundary in animal cells. They are of prime importance for the functional organization of structural elements. Depending on the cell type, morphologically similar but biochemically distinct proteins form highly viscoelastic filament networks with multiple nanomechanical functions. Besides their primary role in cell plasticity and their established function as cellular stress absorbers, recently discovered gene defects have elucidated that structural alterations of IFs can affect their involvement both in signaling and in controlling gene regulatory networks. Here, we highlight the basic structural and functional properties of IFs and derive a concept of how mutations may affect cellular architecture and thereby tissue construction and physiology.

Vimentin coil 1A-A molecular switch involved in the initiation of filament elongation

Interestingly, our previously published structure of the coil 1A fragment of the human intermediate filament protein vimentin turned out to be a monomeric alpha-helical coil instead of the expected dimeric coiled coil. However, the 39-amino-acid-long helix had an intrinsic curvature compatible with a coiled coil. We have now designed four mutants of vimentin coil 1A, modifying key a and d positions in the heptad repeat pattern, with the aim of investigating the molecular criteria that are needed to stabilize a dimeric coiled-coil structure. We have analysed the biophysical properties of the mutants by circular dichroism spectroscopy, analytical ultracentrifugation and X-ray crystallography. All four mutants exhibited an increased stability over the wild type as indicated by a rise in the melting temperature (T(m)). At a concentration of 0.1 mg/ml, the T(m) of the peptide with the single point mutation Y117L increased dramatically by 46 degrees C compared with the wild-type peptide. In general, the introduction of a single stabilizing point mutation at an a or a d position did induce the formation of a stable dimer as demonstrated by sedimentation equilibrium experiments. The dimeric oligomerisation state of the Y117L peptide was furthermore confirmed by X-ray crystallography, which yielded a structure with a genuine coiled-coil geometry. Most notably, when this mutation was introduced into full-length vimentin, filament assembly was completely arrested at the unit-length filament (ULF) level, both in vitro and in cDNA-transfected cultured cells. Therefore, the low propensity of the wild-type coil 1A to form a stable two-stranded coiled coil is most likely a prerequisite for the end-to-end annealing of ULFs into filaments. Accordingly, the coil 1A domains might "switch" from a dimeric alpha-helical coiled coil into a more open structure, thus mediating, within the ULFs, the conformational rearrangements of the tetrameric subunits that are needed for the intermediate filament elongation reaction.

Early detection of aging cartilage and osteoarthritis in mice and patient samples using atomic force microscopy

The pathological changes in osteoarthritis--a degenerative joint disease prevalent among older people--start at the molecular scale and spread to the higher levels of the architecture of articular cartilage to cause progressive and irreversible structural and functional damage. At present, there are no treatments to cure or attenuate the degradation of cartilage. Early detection and the ability to monitor the progression of osteoarthritis are therefore important for developing effective therapies. Here, we show that indentation-type atomic force microscopy can monitor age-related morphological and biomechanical changes in the hips of normal and osteoarthritic mice. Early damage in the cartilage of osteoarthritic patients undergoing hip or knee replacements could similarly be detected using this method. Changes due to aging and osteoarthritis are clearly depicted at the nanometre scale well before morphological changes can be observed using current diagnostic methods. Indentation-type atomic force microscopy may potentially be developed into a minimally invasive arthroscopic tool to diagnose the early onset of osteoarthritis in situ.

Near-UV circular dichroism reveals structural transitions of vimentin subunits during intermediate filament assembly

In vitro assembly of vimentin intermediate filaments (IFs) proceeds from soluble, reconstituted tetrameric complexes to mature filaments in three distinct stages: (1) within the first seconds after initiation of assembly, tetramers laterally associate into unit-length filaments (ULFs), on average 17 nm wide; (2) for the next few minutes, ULFs grow by longitudinal annealing into short, immature filaments; (3) almost concomitant with elongation, these immature filaments begin to radially compact, yielding approximately 11-nm-wide IFs at around 15 min. The near-UV CD signal of soluble tetramers exhibits two main peaks at 285 and 278 nm, which do not change during ULF formation. In contrast, the CD signal of mature IFs exhibits two major changes: (1) the 278-nm band, denoting the transition of the tyrosines from the ground state to the first vibrational mode of the excited state, is lost; (2) a red-shifted band appears at 291 nm, indicating the emergence of a new electronic species. These changes take place independently and at different time scales. The 278-nm signal disappears within the first minute of assembly, compatible with increased rigidity of the tyrosines during elongation of the ULFs. The rise of the 291-nm band has a lifetime of approximately 13 min and denotes the generation of phenolates by deprotonation of the tyrosines' hydroxyl group after they relocalize into a negatively charged environment. The appearance of such tyrosine-binding "pockets" in the assembling filaments highlights an essential part of the molecular rearrangements characterizing the later stages of the assembly process, including the radial compaction.

The supramolecular organization of the C. elegans nuclear lamin filament

Nuclear lamins are involved in most nuclear activities and are essential for retaining the mechano-elastic properties of the nucleus. They are nuclear intermediate filament (IF) proteins forming a distinct meshwork-like layer adhering to the inner nuclear membrane, called the nuclear lamina. Here, we present for the first time, the three-dimensional supramolecular organization of lamin 10 nm filaments and paracrystalline fibres. We show that Caenorhabditis elegans nuclear lamin forms 10 nm IF-like filaments, which are distinct from their cytoplasmic counterparts. The IF-like lamin filaments are composed of three and four tetrameric protofilaments, each of which contains two partially staggered anti-parallel head-to-tail polymers. The beaded appearance of the lamin filaments stems from paired globular tail domains, which are spaced regularly, alternating between 21 nm and 27 nm. A mutation in an evolutionarily conserved residue that causes Hutchison-Gilford progeria syndrome in humans alters the supramolecular structure of the lamin filaments. On the basis of our structural analysis, we propose an assembly pathway that yields the observed 10 nm IF-like lamin filaments and paracrystalline fibres. These results serve also as a platform for understanding the effect of laminopathic mutations on lamin supramolecular organization.

Peptide nanoparticles serve as a powerful platform for the immunogenic display of poorly antigenic actin determinants

The role of actin in transcription and RNA processing is now widely accepted but the form of nuclear actin remains enigmatic. Monomeric, oligomeric or polymeric forms of actin seem to be involved in nuclear functions. Moreover, uncommon forms of actin such as the "lower dimer" have been observed in vitro. Antibodies have been pivotal in revealing the presence and distribution of different forms of actin in different cellular locations. Because of its high degree of conservation, actin is a poor immunogen and only few specific actin antibodies are available. To unravel the mystery of less common forms of actin, in particular those in the nucleus, we chose to tailor monoclonal antibodies to recognize distinct forms of actin. To increase the immune response, we used a new approach based on peptide nanoparticles, which are designed to mimic an icosahedral virus capsid and allow the repetitive, ordered display of a specific epitope on their surface. Actin sequences representing the highly conserved "hydrophobic loop," which is buried in the filamentous actin filament, were grafted onto the surface of nanoparticles by genetic engineering. After immunization with "loop nanoparticles," a number of monoclonal antibodies were established that bind to the hydrophobic loop both in vitro and in situ. Immunofluorescence studies on cells revealed that filamentous actin filaments were only labeled once the epitope had been exposed. Our studies indicate that self-assembling peptide nanoparticles represent a versatile platform that can easily be customized to present antigenic determinants in repetitive, ordered arrays and elicit an immune response against poor antigens.

What transmission electron microscopes can visualize now and in the future

Our review concentrates on the progress made in high-resolution transmission electron microscopy (TEM) in the past decade. This includes significant improvements in sample preparation by quick-freezing aimed at preserving the specimen in a close-to-native state in the high vacuum of the microscope. Following advances in cold stage and TEM vacuum technology systems, the observation of native, frozen hydrated specimens has become a widely used approach. It fostered the development of computer guided, fully automated low-dose data acquisition systems allowing matched pairs of images and diffraction patterns to be recorded for electron crystallography, and the collection of entire tilt-series for electron tomography. To achieve optimal information transfer to atomic resolution, field emission electron guns combined with acceleration voltages of 200-300 kV are now routinely used. The outcome of these advances is illustrated by the atomic structure of mammalian aquaporin-O and by the pore-forming bacterial cytotoxin ClyA resolved to 12 A. Further, the Yersinia injectisome needle, a bacterial pseudopilus and the binding of phalloidin to muscle actin filaments were chosen to document the advantage of the high contrast offered by dedicated scanning transmission electron microscopy (STEM) and/or the STEM's ability to measure the mass of protein complexes and directly link this to their shape. Continued progress emerging from leading research laboratories and microscope manufacturers will eventually enable us to determine the proteome of a single cell by electron tomography, and to more routinely solve the atomic structure of membrane proteins by electron crystallography.

Towards an integrated understanding of the structure and mechanics of the cell nucleus

Changes in the shape and structural organization of the cell nucleus occur during many fundamental processes including development, differentiation and aging. In many of these processes, the cell responds to physical forces by altering gene expression within the nucleus. How the nucleus itself senses and responds to such mechanical cues is not well understood. In addition to these external forces, epigenetic modifications of chromatin structure inside the nucleus could also alter its physical properties. To achieve a better understanding, we need to elucidate the relationship between nuclear structure and material properties. Recently, new approaches have been developed to systematically investigate nuclear mechanical properties. These experiments provide important new insights into the disease mechanism of a growing class of tissue-specific disorders termed 'nuclear envelopathies'. Here we review our current understanding of what determines the shape and mechanical properties of the cell nucleus.

The highly conserved nuclear lamin Ig-fold binds to PCNA: its role in DNA replication

This study provides insights into the role of nuclear lamins in DNA replication. Our data demonstrate that the Ig-fold motif located in the lamin C terminus binds directly to proliferating cell nuclear antigen (PCNA), the processivity factor necessary for the chain elongation phase of DNA replication. We find that the introduction of a mutation in the Ig-fold, which alters its structure and causes human muscular dystrophy, inhibits PCNA binding. Studies of nuclear assembly and DNA replication show that lamins, PCNA, and chromatin are closely associated in situ. Exposure of replicating nuclei to an excess of the lamin domain containing the Ig-fold inhibits DNA replication in a concentration-dependent fashion. This inhibitory effect is significantly diminished in nuclei exposed to the same domain bearing the Ig-fold mutation. Using the crystal structures of the lamin Ig-fold and PCNA, molecular docking simulations suggest probable interaction sites. These findings also provide insights into the mechanisms underlying the numerous disease-causing mutations located within the lamin Ig-fold.

Laminopathic mutations interfere with the assembly, localization, and dynamics of nuclear lamins

Lamins are nuclear intermediate filament proteins and the major building blocks of the nuclear lamina. Besides providing nuclear shape and mechanical stability, lamins are required for chromatin organization, transcription regulation, DNA replication, nuclear assembly, nuclear positioning, and apoptosis. Mutations in human lamins cause many different heritable diseases, affecting various tissues and causing early aging. Although many of these mutations result in nuclear deformation, their effects on lamin filament assembly are unknown. Caenorhabditis elegans has a single evolutionarily conserved lamin protein, which can form stable 10-nm-thick filaments in vitro. To gain insight into the molecular basis of lamin filament assembly and the effects of laminopathic mutations on this process, we investigated mutations in conserved residues of the rod and tail domains that are known to cause various laminopathies in human. We show that 8 of 14 mutant lamins present WT-like assembly into filaments or paracrystals, whereas 6 mutants show assembly defects. Correspondingly, expressing these mutants in transgenic animals shows abnormal distribution of Ce-lamin, abnormal nuclear shape or change in lamin mobility. These findings help in understanding the role of individual residues and domains in laminopathy pathology and, eventually, promote the development of therapeutic interventions.

Nanomechanical basis of selective gating by the nuclear pore complex

The nuclear pore complex regulates cargo transport between the cytoplasm and the nucleus. We set out to correlate the governing biochemical interactions to the nanoscopic responses of the phenylalanineglycine (FG)-rich nucleoporin domains, which are involved in attenuating or promoting cargo translocation. We found that binding interactions with the transport receptor karyopherin-beta1 caused the FG domains of the human nucleoporin Nup153 to collapse into compact molecular conformations. This effect was reversed by the action of Ran guanosine triphosphate, which returned the FG domains into a polymer brush-like, entropic barrier conformation. Similar effects were observed in Xenopus oocyte nuclei in situ. Thus, the reversible collapse of the FG domains may play an important role in regulating nucleocytoplasmic transport.