Evaluation of radiological risk associated with local building materials commonly used in Northwestern Nigeria

In this study, potential radiological risk due to the activity concentrations of primordial radionuclides (²²⁶Ra, ²³²Th, and ⁴⁰K) in commonly used local building materials (sand, clay, kaolin and gypsum) in Northwestern Nigeria were assessed using NaI (Tl) detector. The measured activity concentrations ranged from 47 to 63 Bq kg^-1 for ²²⁶Ra, 24-32 Bq kg^-1 for ²³²Th, and 219-257 Bq kg^-1 for ⁴⁰K respectively. The mean values of ²³²Th, and ⁴⁰K for all samples were below the respective world averages of 45 and 420 Bq kg^-1 with that of ²²⁶Ra for all the samples higher than the world average value of 32 Bq kg^-1. The potential radiological risks were assessed by determining radium equivalent activity (Ra_eq), internal and external hazard indices (H_in and H_ex), absorbed gamma dose rates (D_R), internal annual effective dose rates (IAED), and annual gonadal dose equivalent (AGDE) and activity utilization index (AUI). The assessed parameters were found to range between 104 and 125 Bq kg^-1, 0.99 to 1.15, 0.28 to 0.34, 48 to 58 nGyh^-1, 0.76 to 0.86 mSvy^-1, and 0.78 to 0.96 respectively. The Ra_eq and D_R for all the analyzed samples were found to be within International recommended limits of 370 Bq kg^-1 and 59 nGy h^-1 as recommended by UNSCEAR.

In situ assessment of terrestrial gamma radiation dose and associated radiological hazards in Katsina State, Nigeria

Terrestrial gamma radiation dose (TGRD) rates were measured in situ from different locations in Katsina State, Nigeria, using a portable radiation survey metre based on geological formations and soil types. The measured TGRD rates ranged from 45 to 271 nGyh^-1 with an average value of 116 ± 1 nGyh^-1. Geological formation (silicified sheared rock) and soil type (lithosols and ferruginous crusts and ferruginous tropical soils) appeared to have the highest mean TGRD values of 163 and 134 nGyh^-1 with sandstone geological formation and alluvial and hydromorphic soils having the lowest TGRD with values of 80 and 61 nGyh^-1, respectively. One way ANOVA results shows that the tested null hypothesis was rejected. Thus, indicating that there exists a strong relationship between the various geological formations, soil types with the measured TGRD values based on the alternate hypothesis. Human health hazard indices like annual effective dose equivalent (AEDE), lifetime outdoor annual equivalent dose, and relative excess lifetime outdoor cancer risk associated with the mean TGRD of the study area were also calculated and found to be 0.711, 9.955 mSv, and 5.79 × 10^-4, respectively. These values were higher than the world average values but favourable compared with the safety limits recommended by ICRP.

Investigation of natural radionuclides and radiation shielding potential of some commonly used building materials in Northwestern Nigeria

This study assessed the gamma-ray shielding potential of clay, sand, gypsum and kaolin commonly used as a building material in Northwestern, Nigeria. The radiological status of the samples was first evaluated by determining the activity concentrations of 238U, 232Th and 40K using NaI (Tl) detector after which elemental composition and mass density were determined using Neutron Activation Analytical Technique. After which the mass attenuation coefficients (MAC), linear attenuation coefficients (LAC), half value layer (HVL), tenth value layer (TVL), and effective atomic number (Zeff) were determined experimentally and theoretically using standard point sources of 137Cs and 60Co photon peaks (0.662 and 1.332, 1.173) MeV and Py-MLBUF software. The activity concentrations were found to range from 51 to 59 Bq kg-1 with a mean value of 59 Bq kg-1 for 238U, 24 to 27 Bq kg-1 with a mean value of 29 Bq kg-1 for 232Th, and 219 to 247 Bq kg-1 with a mean value of 247 Bq kg-1 for 40K which were about within the world recommended values of 33, 45 and 420 Bq kg-1 respectively. The results of the elemental compositions show that Si, Al, K, Fe, and Ba in clay and sand samples have concentrations in the range of 36.83-78.48%, 1.92-26.05%, 6.33-21.96%, 2.39-19.09%, and 0.09-1.44%, respectively, while in kaolin and gypsum, results revealed that Si, Al, K, Fe, and Ca range between 0.34 and 65.52%, 1.14-35.82%, 0.00-12.12%, 0.00-5.77%, and 0.00-96.6%, respectively. However, the concentrations of other elements such as Mg, Ti, Mn, Zn, Na, and Ba varied significantly with the samples. The results showed that clay has an average density of 1.96 g/cm3, sand has 2.32 g/cm3, kaolin has 2.63 g/cm3, and gypsum has the highest density with a value of 2.66 g/cm3 compared to other samples. During the measurements, a thallium-activated sodium-iodide NaI (TI) detector was used. A narrow beam transmission geometry condition was adopted for the measurements to ensure minimal scattered radiation. Absorption and attenuation of gamma beams as a function of sample thickness against gamma energy generally exhibit an increasing gamma ray behaviour as the sample thickness increases from 1 to 3 cm. The results showed that the gypsum, kaolin, sand, and clay were capable of attenuating 63.5%, 61.5%, 58.4%, and 44.2 of gamma-ray photons of energy 0.662 MeV at 3 cm thickness %, respectively, and 40.6%, 32.9%, 30.6%, and 27.3% of gamma energy 1.332 MeV at 3 cm thickness, respectively. The results showed that MAC, LAC, and Zeff of all the samples decreased with an increase in photon energy, while those of HVL and TVL increased. The experimental results for all the gamma-ray shielding parameters were found to be in good agreement with the theoretical values obtained using Py-MLBUF. The results have shown that all the samples have similar photon attenuation behaviours; however, gypsum has the best shielding potential than kaolin and this is attributed due to its highest density value.