Refractive index of graphene AA and AB stacked bilayers under the influence of relative planar twisting

The optical properties of graphene in monolayer and bilayer structure is essential for the development of optical devices viz surface plasmon resonance (SPR) based bio-sensors. The band structure of the twisted bilayer graphene (BLG) is remarkably different than the normal AA or AB stacking. This provides an opportunity to control the optical and electrical properties of BLG by applying an in-plane twist to one of the layer relative to other in a BLG system. Here, we calculated the refractive index (RI) of AA and AB stacking of BLG system using density functional theory. Though the spectrum for AA stacking shows some similarity with that of monolayer graphene, the spectrum for AB stacking was found to be remarkably different. The spectrum of AB stacked layer is red-shifted and the absorption peaks in low energy regime increases nearly by three-folds. A large dependency of the twist angle on RI of twisted BLG were found. Based on the calculation, a schematic of phase diagram showing material behavior of such twisted BLG systems as a function of twist angle and photon energy was constructed. The twisted AA stacked BLG shows largely dielectric behavior whereas the twisted AB stacked BLG shows predominately semimetallic and semiconducting behavior. This study presents a RI landscape of twisted BLG dependent on important parameters viz photon energy and inplane relative twist angle. Our studies will be very useful for the design and development of optical devices employing BLG systems particularly SPR based bio-sensors which essentially measures change in RI due to adsorption of analytes.

Facile ultrathin film of silver nanoparticles for bacteria sensing

Silver nanoparticles (AgNPs) exhibit excellent anti-microbial and bactericidal properties. Due to bacterial abhorrence for AgNPs, it is difficult to develop a label-free, sensitive and low-cost bacteria sensor using them. In the present article, we report that an ultrathin and uniform Langmuir-Schaefer (LS) film of AgNPs can be employed for bacteria sensing effectively as compared to that of non-uniform and randomly distributed AgNPs in spin coated film. The uniformly distributed AgNPs in the LS film offer a relatively larger contact surface for bacteria as compared to that of spin coated film. Due to higher contact surface, adsorption of the bacteria on LS film is strongly preferable as compared to that of spin coated film leading to an enhanced sensing performance of the LS film than that of spin coated film. Soil bacteria was grown by the standard protocol and were utilized as model system for bacteria sensing application. The soil bacteria sensing was done by monitoring the piezoresponse and dissipation parameters using a quartz crystal microbalance, simultaneously. Our study indicates that the LS film of AgNPs not only facilitates the adsorption of the soil bacteria but also kills them.

Morphological transformation in the supramolecular assembly of discotic liquid crystal molecules using silver nanoparticles and its sensing application

Triphenylene based discotic liquid crystal (TP) molecules are rich in π-electrons which facilitate π-stacking interaction of the molcules leading to formation of one dimensional nanowires. These nanowires can assemble to form nanoribbons due to a lateral cohesive force among the nanowires. The flat nanoribons undergo a morphological transformation due to incorporation of silver nanoparticles (SNP) into the matrix of TP molecules. The presence of SNP induces a chiral twisting to the nanoribbons and therefore the flat nanoribbons transform into a helical nanoribbon structure. The global chiral structure exhibited by the composition of achiral constituents is due to the creation of topological defects like disclination and dislocation. These defects can lead to a geometrical frustration in the nanoribbons which relaxes with the formation of twisted helical nanoribbons. A minor change in morphology of the supramolecular assembly can have a remarkable effect on the physicochemical properties of the nanoribbons. In this article, we demonstrate that even a minor change in the geometry of aliphatic chains on the surface of nanoribbons can be employed for sensing organic solvents such as acetone and ethanol. The sensing was performed at room temperature. Relative humidity has no effect on the sensing response.

Langmuir monolayer assisted formation of cadmium sulfide nanoparticles at the air–water interface and their role in the alignment of bulk liquid crystals

Metal-sulfide nanoparticles can be fabricated by a one-step synthetic route by forming a Langmuir monolayer of long chain fatty acids over a subphase possessing metal ions and H₂S gas in an air medium.

Ultrathin films of TiO2 nanoparticles at interfaces

The properties of a material change remarkably as a result of the scaling dimensions. The Langmuir-Blodgett (LB) film deposition technique is known to offer precise control over the film thickness and the interparticle separation. To form a well-ordered LB film, it is essential to form a stable Langmuir film at the air-water interface. Here, we report our studies on ultrathin films of TiO2 nanoparticles at air-water and air-solid interfaces. The Langmuir film of TiO2 nanoparticles at the air-water interface was found to be very stable, and it exhibits loose-packing and close-packing phases. The LB films were transferred onto solid substrates for characterization and application. The surface morphology of the LB film was obtained by a field emission scanning electron microscope. The optical and electronic properties of the LB films of TiO2 nanoparticles were studied using UV-vis spectroscopy and current-voltage measurements, respectively. The LB film of TiO2 nanoparticles was employed for ethanol gas sensing, and the sensing performance was compared to that of bulk material. Because of the enormous gain in the surface to volume ratio and the increase in crystalline defect density in the ultrathin LB film of TiO2 nanoparticles, the LB film is found to be a potential functional layer for ethanol sensing as compared to the bulk material.

Solvatochromism of a tricycloquinazoline based disk-shaped liquid crystal: a potential molecular probe for fluorescence imaging

Fluorescence microscopy images of a non-fluorescent discotic liquid crystal (DLC) using tricycloquinazoline (TCQ) based DLC as a molecular probe.

Nanocrystalline CdSe thin films of different morphologies in thermal evaporation process

Cadmium selenide nanocrystalline thin films of quasi-spherical morphology are prepared by evaporating CdSe nanopowders on glass substrates. Slightly oval shaped CdSe particles of about 165 nm average size (in 2-D) could be assembled over glass substrates by controlling the film thickness. Morphologies like assembly of particles, interconnected particles with mosaic-like structures and thin films of smooth surfaces could be prepared simply by controlling film thickness. A mechanism for such morphological variations is proposed. Observed variation of band gap energy in the films is explained in terms of quantum confinement effect and substrate-film interface strain.

Phase transitions in liquid crystals under negative pressures

We report the first measurements of orientational order parameters and phase transition temperatures in nematic and smectic A liquid crystals under negative pressures generated by an isochoric cooling of small droplets embedded in a glass former. Comparison of isobaric and isochoric measurements allows us to estimate the coefficients coupling the order parameter and density of an extended Landau--de Gennes model of the nematic phase.