Plasmonic photothermal heating of gold nanostars in a real-size container: multiscale modelling and experimental study

The ability of noble metal nanoparticles (NPs) to convert light into heat has triggered a lot of scientific interest due to the numerous potential applications, including, e.g. photothermal therapy or laser-based nanopatterning. In order for such applications to be practically implemented, the heating behaviour of NPs embedded in their surrounding medium has to be thoroughly understood, and theoretical models capable of predicting this behaviour must be developed. Here we propose a multiscale approach for modelling the photothermal response of a large ensemble of nanoparticles contained within a cm-scale, real-size container. Electromagnetic field, ray tracing and heat transfer simulations are combined in order to model the response of nanostars and nanospheres suspensions contained within a common Eppendorf tube. To validate the model, gold nanostars are then synthesised and characterized by electron microscopy and optical spectroscopy. Laser-induced heating experiments are conducted by irradiating colloid-filled Eppendorf tubes with a 785 nm continuous wave laser and monitoring by a thermographic camera. The experimental results confirm that the proposed model has potential for predicting and analysing the heating efficiency and temperature dynamics upon laser irradiation of plasmonic nanoparticle suspensions in real-scale containers, at cm³ volumes.

Attosecond pulse generation with an optimization loop in a light-field-synthesizer

We developed an efficient, tailored optimization method for attopulse generation using a light-field-synthesizer [M. Hassan et al., Nature 530, 66 (2016)]. We adapted genetic optimization of single-cycle and sub-cycle waveforms to attosecond pulse generation and achieved significantly improved convergence to many target attosecond pulse shapes. Importantly, we show that the single-atom approach (based on strong field approximation) gives similar results to the more complex and numerically intensive 3D model of the attopulse generation process and that spectrally tunable attosecond pulses can be produced with a light-field synthesizer.

Non-collinear high-order harmonic generation by three interfering laser beams

High order harmonic generation (HHG) has shown its impact on several applications in Attosecond Science and Atomic and Molecular Physics. Owing to the complexity of the experimental setup for the generation and characterization of harmonics, as well as to the large computational costs of numerical modelling, HHG is generally performed and modelled in collinear geometry. Recently, several experiments have been performed exploiting non-collinear geometry, such as HHG in a grating of excited molecules created by crossing beams. In such studies, harmonics were observed at propagation directions different from those of the driving pulses; moreover the scattered harmonics were angularly dispersed.In this work we report on a new regime of HHG driven by multiple beams, where the harmonics are generated by three synchronized, intense laser pulses organized in a non-planar geometry. Although the configuration we explore is well within the strong-field regime, the scattered harmonics we observe are not angularly dispersed.

Coherent kiloelectronvolt x-rays generated by subcycle optical drivers: a feasibility study

We theoretically explored the feasibility of high-harmonic generation in the kiloelectronvolt spectral range by optical waveforms of durations progressively shortened from multicycle to subcycle. Our study revealed that subcycle optical pulses offer a clear advantage in generating isolated x-ray attosecond pulses. In combination with their sub-fs optical drivers these pulses will open the route for x-ray attosecond pump-optical attosecond probe experiments, advancing attosecond streaking and attosecond absorption techniques to new realms of investigation of electronic processes.

Hollow-fiber compression of visible, 200 fs laser pulses to 40 fs pulse duration

We demonstrate the use of a very simple, compact, and versatile method, based on the hollow-fiber compression technique, to shorten the temporal length of visible laser pulses of 100-300 fs to pulse durations shorter than approximately 50 fs. In particular, 200 fs, frequency-doubled, Nd:glass laser pulses (527 nm) were spectrally broadened to final bandwidths as large as 25 nm by nonlinear propagation through an Ar-filled hollow fiber. A compact, dispersive, prism-pair compressor was then used to produce as short as 40 fs, 150 microJ pulses. A very satisfactory agreement between numerical simulations and measurements is found.

Fringe pattern of the field diffracted by axicons

The far-field intensity pattern of laser beams diffracted by axicons is extensively characterized both theoretically and experimentally. The regular structure of the pattern, consisting of high-contrast fringes, is explained. The experimental results have been interpreted by representing the diffracted field as generated by an extended virtual source shaped as a circle centered on the optical axis of the incident laser beam. The simulations include modifications to the diffraction pattern arising from the laser radiation diffraction limit at the axicon tip, and they reproduce well the measured intensity profile at different distances from the axicon.

Migration modelling as a tool for quality assurance of food packaging

The current potential for the use of migration modelling for studying polyolefin packaging materials (low- and high-density polyethylene and polypropylene) is summarized and demonstrated with practical examples. For these polymers, an upper limit of migration into foodstuffs can be predicted with a high degree of statistical confidence. The only analytical information needed for modelling in such cases is the initial concentration of the migrant in the polymer matrix. For polyolefins of unknown origin or newly developed materials with new properties, a quick experimental method is described for obtaining the characteristic matrix parameter needed for migration modelling. For easy handling of both the experimental results and the diffusion model, user-friendly software has been developed. An additional aim of the described method is the determination of the migrant partition between polymer and food or food simulant and the specific contribution of the migrant molecular structure on the diffusion coefficient. For migration modelling of packaging materials with multilayer structures, a numerical solution of the diffusion equation is described. This procedure has been also applied for modelling the migration into solid or high viscous foodstuffs.