Effects of Different Polypropylene (PP)-Backbones in Aluminium Feedstock for Fused Filament Fabrication (FFF)

The current study presents the effect of the backbone as an important binder component on the mechanical, rheological, and thermal properties of Aluminium (Al) alloy feedstocks. A thermoplastic elastomer (TPE) main binder component was blended with either polypropylene (PP), grafted-maleic anhydride-PP (PPMA), or grafted-maleic anhydride-PPwax (PPMAwax) plus PP, as the backbone. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) tests were performed to investigate the thermal properties of binder systems and feedstocks. Fourier-transform infrared (FTIR) spectroscopy was used to study the chemical interaction between the binder and the Al alloy. After making feedstock filaments, tensile tests, scanning electron microscopy (SEM), and fused filament fabrication (FFF) printing were done. The results showed that although the PP printability was acceptable, the best mechanical properties and printed quality can be achieved by PPMA. TGA test showed that all binder systems in the feedstocks could be removed completely around 500 °C. From FTIR, the possibility of chemical reactions between Al alloy particles and maleic anhydride groups on the grafted PP backbone could explain the better dispersion of the mixture and higher mechanical properties. Tensile strength in PP samples was 3.4 MPa which was improved 1.8 times using PPMA as the backbone.

Research Progress on Low-Pressure Powder Injection Molding

Powder injection molding (PIM) is a well-known technique to manufacture net-shaped, complicated, macro or micro parts employing a wide range of materials and alloys. Depending on the pressure applied to inject the feedstock, this process can be separated into low-pressure (LPIM) and high-pressure (HPIM) injection molding. Although the LPIM and HPIM processes are theoretically similar, all steps have substantial differences, particularly feedstock preparation, injection, and debinding. After decades of focusing on HPIM, low-viscosity feedstocks with improved flowability have recently been produced utilizing low-molecular-weight polymers for LPIM. It has been proven that LPIM can be used for making parts in low quantities or mass production. Compared to HPIM, which could only be used for the mass production of metallic and ceramic components, LPIM can give an outstanding opportunity to cover applications in low or large batch production rates. Due to the use of low-cost equipment, LPIM also provides several economic benefits. However, establishing an optimal binder system for all powders that should be injected at extremely low pressures (below 1 MPa) is challenging. Therefore, various defects may occur throughout the mixing, injection, debinding, and sintering stages. Since all steps in the process are interrelated, it is important to have a general picture of the whole process which needs a scientific overview. This paper reviews the potential of LPIM and the characteristics of all steps. A complete academic and research background survey on the applications, challenges, and prospects has been indicated. It can be concluded that although many challenges of LPIM have been solved, it could be a proper solution to use this process and materials in developing new applications for technologies such as additive manufacturing and processing of sensitive alloys.