Reduced graphene oxide (rGO) supported electron deficient B-doped TiO2 (Au/B-TiO2/rGO) nanocomposite: An efficient visible light sonophotocatalyst for the degradation of Tetracycline (TC)

Incorporation of electron deficient boron atoms along with Au doped TiO₂ in the presence of rGO support was synthesized by hydrothermal method and demonstrated for the sonophotocatalytic degradation of TC under visible light illumination. The successful incorporation of electron deficient boron atoms and Au on TiO₂ was considerably enhanced the optical absorption towards visible region due to the formation acceptor energy levels below to the conduction band of TiO₂ by boron doping and surface plasmonic effect of Au. Moreover, formation of acceptor energy levels and introduction of reduced graphene oxide (rGO) support significantly improved the electron-hole pair separation and transportation which were supported by UV-vis-DRS, photo-current and photoluminescence measurements. The individual effect of photocatalysis and ultrasound for the TC degradation was found to be 45% and 12%, respectively. Importantly, a complete degradation (100%) of TC was achieved with 1.3 folds synergistic effect when ultrasound coupled with photocatalysis in 1 h. The enhanced degradation activity was mainly attributed to combined effect of rapid electron-hole pair separation facilitated by electron deficient B-atoms and rGO support and physical forces of ultrasound as well. In addition, ∼74% of Total Organic Carbon (TOC) removal was achieved within 1 h which further confirmed the effective demineralization of TC by the Au/B-TiO₂/rGO composite.

rGO supported self-assembly of 2D nano sheet of (g-C3N4) into rod-like nano structure and its application in sonophotocatalytic degradation of an antibiotic

Graphitic carbon nitride (g-C₃N₄) is an analog of graphite due to its unique electronic structure. g-C₃N₄ based materials have been used in photocatalytic applications. However, pure g-C₃N₄ suffers from major shortcomings which include poor disparity, low surface area and a high recombination rate of photo generated electron-hole pairs that significantly reduce its photocatalytic activity. In this work, self-assembly of g-C₃N₄ sheet into rod shaped g-C₃N₄ was developed via a simple polymerisation method. A composite made of g-C₃N₄ nanorods and rGO (rGO-RCN) was also prepared. The band gap g-C₃N₄ was shifted from 2.77 to 2.6 eV evidented by UV-DRS data. As a result, rGO-RCN showed a relatively high absorption in the visible region. Moreover, a fast electron transfer rate was observed with rGO-RCN composite as conformed from PL analysis and photocurrent measurement. The formation of nanorod and sheet morphologies was confirmed via TEM analysis. The photocatalytic activities of prepared sheet-g-C₃N₄ (SCN)_, Rod g-C₃N₄ (RCN), reduced graphene oxide supported sheet-g-C₃N₄ (rGO-SCN) and reduced graphene oxide supported Rod-g-C₃N₄ (rGO-RCN) were evaluated using a commonly used antibiotic (tetracycline). Among these catalysts, rGO-RCN nanocomposite showed sonophotocatalytic activity 3 times higher compared to pure g-C₃N₄. This superior sonophotocatalytic activity could be due to enhanced visible light absorption of the material, active sites generated by ultrasound, and the high electron transport property of rGO.

Construction of S-scheme 1D/2D rod-like g-C3N4/V2O5 heterostructure with enhanced sonophotocatalytic degradation for Tetracycline antibiotics

Pharmaceutically active compounds are an emerging water contaminant that resists conventional wastewater treatments. Herein, the sonophotocatalytic degradation of Tetracycline (TC) antibiotics as a model contaminant was carried out over a rod-like g-C₃N₄/V₂O₅ (RCN-VO) nanocomposite. RCN-VO nanocomposite was synthesized via ultrasound-assisted thermal polycondensation method. The results showed that the RCN-VO nanocomposite could completely remove the TC in water within 60 min under simultaneous irradiation of visible light and ultrasound. Moreover, the sonophotocatalytic TC degradation (a synergy index of ∼1.5) was superior to the sum of individual sonocatalytic and photocatalytic degradation using RCN-VO nanocomposite. Besides, the enhanced sonophotocatalytic activity of RCN-VO can be attributed to the 1D/2D nanostructure and the S-scheme heterojunction formation between RCN and VO where the electrons migrated from RCN to VO across the RCN-VO interface. Under irradiation, the built-in electric field, band edge bending and Coulomb interaction can synergistically facilitate the unavailing electron-hole pair recombination. Thereby, the cumulative electron in RCN and holes in VO can actively take part in the redox reaction which generates free radicals and attack the TC molecules. This study provides insight into a novel S-Scheme heterojunction photocatalyst for the removal of various refractory contaminants via sonophotocatalytic degradation.

Complete photocatalytic degradation of tetracycline by carbon doped TiO2 supported with stable metal nitrate hydroxide

Visible light-driven carbon-doped TiO₂ supported with metal nitrate hydroxide (CT-Ni/Co/Cu) nanocomposites were prepared and characterized by various studies. It is fascinating to note that particle size of TiO₂ was substantially reduced from 5 μm to 50 nm after doping of carbon which was confirmed by FESEM. Moreover, the incorporation of stable metal (Cu) nitrate hydroxide further enhanced the visible light absorption up to 800 nm as evident by UV-DRS. The carbon doping and copper nitrate formation are validated by the Ti-O-C and N-O bonds using XPS and FTIR spectra. The photocatalytic activity of as-prepared photocatalyst was tested for the tetracycline degradation (TC, 10 mg/mL) under light irradiation. Significantly, 3 wt% carbon-doped TiO₂ (31CT) with Cu (II) hydroxide nitrate nanocomposite photocatalyst exhibited an excellent photocatalytic activity (97%, within 1 h), and the corresponding reaction rate was around 2 times higher than bare TiO₂. The excellent photocatalytic activity of 31CT-Cu nanocomposite was due to enhanced adsorbent of TC via carbon doping, visible light absorption, improved photo-generated carrier separation and migration by metal nitrate hydroxide as a support. This work may promote the development of a new carbon-doped TiO₂ supported with highly stable metal nitrate hydroxide nanocomposite by facile method and used as an efficient photocatalyst for photodegradation of environmental pollutants.

Complete removal of Tetracycline by sonophotocatalysis using ultrasound-assisted hierarchical graphitic carbon nitride nanorods with carbon vacancies

Tuning a graphitic carbon nitride (CN) structure is an effective strategy to advance its physicochemical and electronic properties. Herein, hierarchical CN nanorods with carbon vacancy were synthesized via ultrasound-assisted thermal polycondensation method wherein melamine-HONH₂·HCl complex acts as a template. The hierarchical CN nanorods can facilitate multiple light scattering, provide large specific surface area with extensive reactive sites and endow abundant mass-transport channels for charge migration. The existence of carbon vacancies can serve as shallow charge trapping sites and prompt charge separation. Consequently, hierarchical CN nanorod possessed excellent sonophotodegradation efficiency of ∼100% towards Tetracycline (TC) antibiotic within 60 min under ultrasonic irradiation and visible light illumination. Moreover, the sonophotocatalytic degradation was higher than the sum of sonocatalytic and photocatalytic TC degradation using hierarchical CN nanorods due to its synergistic performance. A plausible sonophotocatalytic mechanism and TC degradation pathway using hierarchical CN nanorod were proposed. Lastly, hierarchical CN nanorod is durable and stable which can withstand the sonophotocatalytic condition even after the fifth run. This work offers an insight into hierarchical CN nanorod to advance sonophotocatalytic degradation performance for highly efficient removal of various recalcitrant pollutants.

Revealing the stability of CuWO4/g-C3N4 nanocomposite for photocatalytic tetracycline degradation from the aqueous environment and DFT analysis

Graphitic carbon nitride (g-C₃N₄) is an emerging metal-free photocatalyst, however, engineering the photocatalytic efficiency for the effective degradation of hazardous molecules is still challenging. An unstable and low bandgap CuWO₄ was composited with g-C₃N₄ to achieve synergistic benefits of tuning the visible light responsiveness and stability of CuWO₄. CuWO₄/g-C₃N₄ nanocomposite exhibited a relatively high visible light absorption region and the bandgap was modified from 2.77 to 2.53 eV evidenced via UV-DRS. Moreover, the fast electron transfer rate was observed with CuWO₄/g-C₃N₄ nanocomposite as confirmed using PL and photocurrent studies. XRD, FT-IR, and HR-TEM analyses signified the formation of CuWO₄/g-C₃N₄ nanocomposite. CuWO₄/g-C₃N₄ nanocomposite showed enhanced photocatalytic degradation of Tetracycline (TC) about ∼7.4 fold greater than pristine g-C₃N₄ in 120 min. Notably, the OH^• and ^•O₂^- radicals played a most significant role in photocatalytic TC degradation. Furthermore, the energy band structure, density of state, and Bader charge analyses of these molecules were performed.

One-step synthesis of rod-on-plate like 1D/2D-NiMoO4/BiOI nanocomposite for an efficient visible light driven photocatalyst for pollutant degradation

Visible light active 1D/2D-NiMoO₄/BiOI nanocomposite photocatalyst has been constructed by single step solvothermal method. Various compositions of NiMoO₄/BiOI nanocomposites are prepared by loading different amounts of nickel molybdate (NiMoO₄) (1, 2, 3 wt%) to the bismuth oxy iodide (BiOI) and investigated by XRD, FTIR, SEM, EDAX, TEM, UV-vis DRS, and PL analysis. Among the as-prepared photocatalysts, 1 wt% NiMoO₄ incorporated BiOI (NMBI-1) showed superior photocatalytic activity with a rate constant of 0.0442 min^-1 for methylene blue degradation. While the bandgap values of pure BiOI and NiMoO₄ are 1.94 and 2.43 eV, respectively, the optimized NMBI-1 exhibited a lower bandgap energy of 1.64 eV, and showed about 2 and 3.7 times higher photodegradation ability than the pure NiMoO₄ and BiOI, respectively, towards MB removal under visible light. The NMBI-1 nanocomposite photocatalyst is stable even after four cycles, indicating an excellent photostability and recyclability. Charge carriers on the interface of NiMoO₄ and BiOI easily transferred via the newly formed heterojunction, thereby increasing the photocatalytic performance. Photochemically formed h⁺ and^.OH are found to be the major species in the MB removal under visible light illumination. Therefore, the 1D/2D-NiMoO₄/BiOI nanocomposite photocatalyst materials may be considered for the wastewater remediation processes.

One-pot synthesis of bismuth yttrium tungstate nanosheet decorated 3D-BiOBr nanoflower heterostructure with enhanced visible light photocatalytic activity

A visible light driven BiOBr/Bi_xY_1-xWO₆ nanocomposite photocatalyst of various compositions are prepared by the addition of different amounts of KBr (0.5, 1.0, 1.5, 2.0 mmol) in Bi_xY_1-xWO₆ by a one-pot hydrothermal method. Furthermore, the photocatalytic properties of the as-prepared materials are analyzed by the decomposition of methylene blue under visible light illumination. In particular, the BiOBr/Bi_xY_1-xWO₆ nanocomposite prepared by taking 1.5 mmol of KBr present a superior photocatalytic ability (78.3%) with the rate constant value 0.016 min^-1, a low bandgap (E_g = 2.51 eV) as well as photoluminescence emission intensity than other photocatalysts prepared in this study. The radical scavenging studies revealed that OH and h⁺ performed an imperative role in the decomposition of methylene blue. Furthermore, the optimized photocatalyst is stable even after four cycles, which exposes the excellent photostability and reusability properties of the photocatalyst. In addition, a plausible mechanism of decomposition of methylene blue under visible light irradiation is also proposed.