Interactions of antigen-loaded polylactide particles with macrophages and their correlation with the immune response

Size of the polymeric particulate antigen delivery system and its interactions with antigen-presenting cells (APCs) influence the immune response both qualitatively and quantitatively. In this paper, we report that antigen-loaded polymeric microparticles elicit antibody titers without being phagocytosed by macrophages; and size of the antigen-loaded particles modulates immune response from single-point immunization. Antibody titers varied significantly from single-point immunization with different sized polylactide (PLA) particles entrapping hepatitis B surface antigen. Nanoparticles (200-600 nm) were efficiently taken up by macrophages and elicited lower antibody titers in comparison to microparticles (2-8 microm). PLA microparticles that elicited highest and long-lasting antibody titers from single-point immunization were not taken up by the macrophages and found attached to the surface of the macrophages. Immunization with nanoparticles (200-600 nm) was associated with higher levels of IFN-gamma production, upregulation of MHC class I molecules along with antibody isotypes favoring Th1-type immune response. Immunization with microparticles (2-8 microm size) promoted IL-4 secretion, upregulated MHC class II molecules and favored Th2-type immune response. Western blot analysis showed that release of HBsAg from surface-attached microparticles into macrophages increased with time, but was more or less constant in case of nanoparticles. Our results suggest that continuous release of high concentration of antigen from cell surface-attached PLA microparticles into APCs results in improved antibody response from single-point immunization. It also offers an exciting possibility of designing size-based polymer particle delivery system to modulate immune response.

The immunogenic characteristics associated with multivalent display of Vi polysaccharide antigen using biodegradable polymer particles

Polysaccharides in their great majority are thymus-independent (TI) antigens. Anti-polysaccharide antibody responses are generally weak and characterized by lack of memory, isotype restriction and delayed ontogeny. We report here the generation of protective memory antibody response by multivalent display of polysaccharide antigens on biodegradable polymeric particles. Single dose immunization using polylactide (PLA) polymer particles entrapping Vi capsular polysaccharide antigen from Salmonella typhi promoted isotype switching and induced polysaccharide-specific memory antibody response in experimental animals. PLA nanoparticles as well as microparticles entrapping Vi polysaccharides elicited high IgG titer in comparison to soluble Vi immunization. Immunizations with particles co-entrapping both Vi polysaccharide and tetanus toxoid did not improve the anti-polysaccharide antibody responses. Lower antibody response from co-entrapped formulation was mostly due to inhibition of particle phagocytosis by the macrophages. Immunization using polylactide particles entrapping only Vi polysaccharide with higher density on surface elicited highest secondary antibody response as well as promoted isotype switching. The vaccination potential of particle based immunizations was further confirmed by the generation of quick memory antibody responses while challenging the immunized animals with live S. typhi. This approach provides a multivalent display of polysaccharide antigen using polymer particles and elicits protective memory antibody response without conjugation to a carrier protein.

Evaluation of Parenteral Depot Insulin Formulation using PLGA and PLA Microparticles

PLGA and PLA microparticles entrapping insulin are prepared by solvent evaporation method and are evaluated in diabetes-induced rat for its efficacy in maintaining blood sugar level from a single intramuscular dose. In vitro release of insulin from PLGA and PLA microparticles are 75.35 ± 1.73% and 67.536 ± 2.23%, respectively in 168 h (7 days). Released insulin from polymer particles are mostly in monomeric form without aggregation. Optimal use of stabilizers during particle formulation helps in reducing protein denaturation and thus results in stabilized insulin-loaded polymer particles. Intramuscular administration of insulin-loaded PLGA (50 : 50) and PLA microparticles (equivalent to 25 IU insulin/kg of animal weight) in alloxaninduced diabetic rats result in 53.86 ± 4.2% and 39.52 ± 6.7% reduction in blood glucose level, respectively in 96 h. This effect continued up to 7 days in case of PLGA and PLA microparticles.

A randomized Phase I/II study to evaluate safety and reactogenicity of a heat-stable rotavirus vaccine in healthy adults followed by evaluation of the safety, reactogenicity, and immunogenicity in infants

Objectives: To assess the safety and reactogenicity of single oral dose of heat-stable rotavirus vaccine (HSRV) in healthy adults aged 18–45 years followed by assessment of safety, reactogenicity, and immunogenicity of three doses of HSRV in healthy infants aged 6–8 weeks at enrollment.

Trial Design: Single-center randomized controlled, sequential, blinded (adults) and open-label (infants).

Setting: Single site at International Center for Diarrheal Disease Research, Bangladesh (icddr,b).

Participants: Fifty eligible adults randomized in 1:1 ratio (HSRV: Placebo) followed by 50 eligible infants randomized in 1:1 ratio (HSRV: Comparator (RotaTeq®, pentavalent human-bovine (WC3) reassortant live-attenuated, rotavirus vaccine)).

Intervention: Adults received either a single dose of HSRV or placebo and followed for 14 days. Infants received three doses of either HSRV or comparator with a follow-up for 28 days after each dose.

Main Outcome Measures: Solicited and unsolicited adverse events (AEs) along with any serious adverse events (SAEs) were part of the safety and reactogenicity assessment in adults and infants whereas serum anti-rotavirus IgA response rates were part of immunogenicity assessment in infants only. Post-vaccination fecal shedding of vaccine-virus rotavirus strains was also determined in adults and infants.

Results: In this study, HSRV, when compared with placebo, did not result in increase in solicited adverse events (solicited AEs) in adults. In infants, HSRV had a safety profile similar to comparator vis-à-vis solicited AEs. In infants, fecal shedding of vaccine-virus strains was not detected in HSRV recipients but was observed in two comparator recipients. Percentage of infants exhibiting threefold rise in serum anti-rotavirus IgA titers from baseline to 1-month post-dose 3 in HSRV group was 88% (22/25) and 84% (21/25) in comparator group.

Conclusion: HSRV was found to be generally well-tolerated in both adults and infants and immunogenic in infants.

Role of alum in improving the immunogenicity of biodegradable polymer particle entrapped antigens

This study was aimed at understanding the role of alum in improving the immunogenicity of biodegradable polymer particle entrapped antigens. Presence of alum formed a fine network around PLA particles holding them together and promoted attachment of higher number of particles on macrophage surface for a considerable period of time. Use of alum lowered the burst release of the entrapped antigen from particles and thereafter also reduced the cumulative release of antigen from particles. Apart from this, PLA microparticles alone induced macrophages to release TNF-alpha similar to that induced by alum. However admixture of PLA particles and alum enhanced the secretion of TNF-alpha from 876pg/ml at 6h to 3500pg/ml at 24h which was higher than that induced by alum adsorbed TT. Immunization with admixture of antigen loaded polylactide (PLA) microparticles (2-8microm) and alum improved the antibody titers almost twice than that achieved from particle alone in experimental animals. Single point immunization with particle entrapped antigens and alum also elicited antibody titers comparable to two doses of alum adsorbed tetanus toxoid (TT) or diphtheria toxoid (DT). Our results suggest that presence of alum acts in multiple ways to improve the antibody titers of polymer particles entrapped antigens. Such co-operative adjuvant action of alum and polymer particles can be exploited to improve the immunogenicity of other antigens.

CoviWall, a whole-virion-inactivated B.1.617.2 vaccine candidate, induces potent humoral and Th1 cell response in mice and protects against B.1.617.2 strain challenge in Syrian hamsters

Rapid development of coronavirus disease 2019 (COVID-19) vaccines and antiviral drugs have significantly reduced morbidity and mortality worldwide. Although most of the vaccines were developed initially with the ancestral Wuhan antigen, here, we report the development and immunological efficacy of a whole-virion-inactivated vaccine candidate (CoviWall) to combat the deadly B.1.617.2 (Delta strain) infection. In the current study, we demonstrate a consistent manufacturing process under Good Manufacturing Practice for the development of CoviWall and its characterization using various analytical methods as per regulatory compliance. In addition, we provide pre-clinical immunogenicity and protective efficacy data of the CoviWall vaccine. All the three test doses (i.e., low dose, mid dose, and high dose) immunized in C57BL/6 mice elicited a high titer of anti-receptor-binding domain antibody and neutralizing antibody response against severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) after second booster dose. In addition, CoviWall immunization also produced a significant T-cell response in the immunized animals. Our B.1.617.2 strain challenge data in Syrian hamsters indicate that immunized hamsters show attenuated clinical manifestations of COVID-19 with reduced lung viral load. Moreover, assessment of pulmonary histopathology revealed lower cellular injury, inflammation, and pneumonia in the vaccinated hamsters as compared to the unvaccinated animals. Such promising results augur well for the clinical phase I trial of the CoviWall vaccine and further development against contagious SARS-CoV-2 strains in the future.