[Research and development of an air sampling tube for chlorobenzene compounds and its supporting determination method]

Objective: To establish a GDH-3 air sample tube for simultaneous determination of twelve kinds of chlorobenzene compounds (CBs) in workplace air by gas chromatography. And to established a matching determination method. Methods: In October 2020, the vapor and aerosol CBs in workplace air were collected by GDH-3 air sampling tube, and desorption and elution with 3.00 ml toluene for 15 min, then the solution separated by DB-23 capillary column, and finally detected with microcell electron capture detector. Results: The quantitative determination ranges of twelve isomers of CBs were 0.71×10(-3)-2000.00 mg/L, with the correlative coefficients were 0.99967-0.99998. The minimum detectable concentrations were 0.04-112.63 μg/m(3), and the minimum quantification concentrations were 0.14-375.42 μg/m(3) (15.00 L sample, 3.00 ml sample solution) . The average elution efficiencies were 96.00%-104.00%. The within-run relative standard deviations (RSDs) were 2.54%-6.12%, and the between-run RSDs were 3.85%-7.87%. Sealed samples could be stable at room temperature for at least 15 days. Conclusion: GDH-3 air sample tube can be used for simultaneous determination of twelve kinds of CBs in workplace air by gas chromatography. The established supporting measurement method meets the measurement requirements of the occupational health standard detection method, and the it's suitable for the simultaneous determination of 12 kinds of CBS in the air.

[Application of a new solid adsorbent tube for the determination of three kinds of epoxy eompounds in air]

Objective: To develop a new solid sorbent tube for simultaneously capturing ethylene oxide (EO) , propylene oxide (PO) and epichlorohydrin (ECH) in air, and establish a complete set of method. Methods: In June 2018, EO, PO and ECH in air were captured by the new solid sorbent tube filled with carbon aerogel adsorbent, desorbed with solution of 5% (V/V) methanol-methylene chloride, separated through capillary chromatographic column, and then analyzed by gas chromatography-flame ionization detector. Results: The linear ranges of EO, PO and ECH were 0.24-960.00, 0.60-2384.00 and 0.12-472.40 mg/L respectively, and the related coefficients were between 0.99995-0.99997. The relative standard deviations (RSD) within the group were 1.66%-4.09%, 1.36%-4.43%, and 1.99%-5.65%, respectively, and the RSD between the group were 2.69%-4.95%, 2.77%-5.30%, and 3.27%-6.67%, respectively. The average desorption efficiencies were 88.25%-94.50%, 98.17%-98.60%, and 97.79%-101.04%, respectively. The samples could be stored at 4 ℃ refrigerator for at least 27 days. Conclusion: The newly developed solid sorbent tube filled with carbon aerogel adsorbent and its complete set of gas chromatography method could be used for sampling and quantitative detection of EO, PO and ECH in workplace air.

[Simultaneous determination of four kinds methyl acrylate compounds in workplace air]

Objective: To develop a solvent desorption-gas chromatography method for simultaneous determination of methyl methacrylate (MMA) , ethyl methacrylate (EMA) , n-propyl methacrylate (PMA) and butyl methacrylate (BMA) in workplace air. Methods: MMA, EMA, PMA and BMA in workplace air were captured by charcoal tubes and desorbed with carbon disulfide, separated through capillary chromatographic column, and then analyzed by gas chromatography-flame ionization detector. Results: The linear ranges of MMA, EMA, PMA and BMA were 0-8 305.00 mg/L, 0-9 080.50 mg/L, 0-8 899.00 mg/L and 0-8 371.00 mg/L respectively, and the related coefficients were between 0.999 96-0.999 98. The relative standard deviations (RSD) within the group were 0.56%-1.71%, 0.45%-1.65%, 0.51%-1.49% and 0.45%-1.50% respectively, and the RSD between the group were 1.14%-2.79%, 0.79%-2.13%, 0.93%-2.30% and 1.09%-2.84% respectively. The average desorption efficiencies were 95.76%-99.58%, 97.82%-102.28%, 98.55%-102.28%and 98.70%-102.40% respectively. The minimum quantification concentrations were 0.12 mg/m(3), 0.10 mg/m(3), 0.07 mg/m(3) and 0.07 mg/m(3) respectively (3.00 L sample) . The samples could be stored at room temperature for at least 7 days. Conclusion: This method could be used for monitoring of MMA, EMA, PMA and BMA in workplace air.

[Study on determination of ethylal in workplace air by gas chromatography]

Objective: A solvent desorption-gas chromatography method for determination of ethylal in workplace air has been established. Methods: Ethylal in workplace air was collected by activated carbon tube and desorbed with carbon disulfide, and the desorption solutions were analysed by capillary column GC with FID detector. Results: The method presented a good linearity in the range of 0.87~34 800.00 mg/L of ethylal in the standard solution, with the correlation coefficient being r=0.999 7. The limit of detection and the limit of quantification of this method were respectively 0.20 mg/L and 0.80 mg/L, and the minimum detectable concentration and the minimum quantification concentration of this method were respectively 0.17 mg/m(3) and 0.60 mg/m(3) per 1.50 L of air.The within-run precision of the method was 2.93%-6.20%, and the between-run precision 3.67%-6.44%. The desorption efficiency between 94.22%-97.27%. Ethylal in activated carbon tube could be kept at least 7 days at room temperature without significant loss. Conclusion: The method could be used for determination of ethylal in workplace air.

[Determination of glycidyl methacrylate in the air of workplace captured adsorbent tube by gas chromatography]

Objective: To develop a new solid sorbent tube for capturing glycidyl methacrylate (GMA) in workplace air, and establish a complete set of method. Methods: GMA in workplace air was captured by the new solid sorbent tube filled with carbon aerogel adsorbent, desorbed with solution of 50% (V/V) dimethylformamide-carbon disulfide, separated through capillary chromatographic column, and then analyzed by gas chromatography-flame ionization detector. Results: The linear range of GMA was 0.38-604.80 mg/L, and the related coefficient was 0.999 82. The within-run and the between-run precision were 1.11%-2.80% and 2.53%-4.84% respectively. The average desorption efficiency was 93.20%-94.97%. The minimum quantification concentration and The minimum quantification concentration were 0.02 and 0.07 mg/m(3) respectively (3.00 L sample) . Samples could be stored for at least 8 days at room temperature. Conclusion: The newly developed solid sorbent tube and its complete set of gas chromatography method is simple, and has high sensitivity and precision, so it can be used for sampling and quantitative detection of GMA in workplace air.

[Determination of volatile organic compounds in air by portable gas chromatography-mass spectroscopy]

Objective: To investigate the method of portable gas chromatography-mass spectroscopy (GC-MS) for the determination of common volatile organic compounds in air. Methods: The static volumetric method was used, with highly purified nitrogen gas as the diluents gas, to prepare the mixed standard gas of common volatile organic compounds with various mass concentrations. A portable GC-MS handheld probe was used for sampling and measurement, retention time and characteristic ion were used for qualitative analysis, and the full-scan mode was used for quantitative analysis. Results: The correlation coefficient of 12 volatile organic compounds determined by this method was higher than 0.999. The minimum detection mass concentration was 0.02~0.12 mg/m³, and the minimum quantitative mass concentration was 0.07~0.40 mg/m³. The relative standard deviation of precision was 4.10%~12.50%; the relative deviation of acetone, benzene, methylbenzene, and dimethylbenzene was-13.56% , 9.03% , -10.82% , and 8.67% , respectively. Conclusion: Portable GC-MS method can be used for the qualitative analysis and quantification of volatile organic compounds in occupational hazard factors and provide technical supports for identification of occupational hazard factors.

Effective fast electron acceleration along the target surface

The dependence of angular distributions of fast electrons generated in the interaction of p-polarized femtosecond laser pulses with foil targets on laser intensities is investigated. A novel fast electron beam along the front target surface is observed for high laser intensity. It is found that the electron acceleration along the target surface is more efficient than those in other directions.