Volumetric measurement of pulmonary nodules at low-dose chest CT: effect of reconstruction setting on measurement variability

OBJECTIVE

To assess volumetric measurement variability in pulmonary nodules detected at low-dose chest CT with three reconstruction settings.

METHODS

The volume of 200 solid pulmonary nodules was measured three times using commercially available semi-automated software of low-dose chest CT data-sets reconstructed with 1 mm section thickness and a soft kernel (A), 2 mm and a soft kernel (B), and 2 mm and a sharp kernel (C), respectively. Repeatability coefficients of the three measurements within each setting were calculated by the Bland and Altman method. A three-level model was applied to test the impact of reconstruction setting on the measured volume.

RESULTS

The repeatability coefficients were 8.9, 22.5 and 37.5% for settings A, B and C. Three-level analysis showed that settings A and C yielded a 1.29 times higher estimate of nodule volume compared with setting B (P = 0.03). The significant interaction among setting, nodule location and morphology demonstrated that the effect of the reconstruction setting was different for different types of nodules. Low-dose CT reconstructed with 1 mm section thickness and a soft kernel provided the most repeatable volume measurement.

CONCLUSION

A wide, nodule-type-dependent range of agreement between volume measurements with different reconstruction settings suggests strict consistency is required for serial CT studies.

Quantifying local radiation-induced lung damage from computed tomography

PURPOSE

Optimal implementation of new radiotherapy techniques requires accurate predictive models for normal tissue complications. Since clinically used dose distributions are nonuniform, local tissue damage needs to be measured and related to local tissue dose. In lung, radiation-induced damage results in density changes that have been measured by computed tomography (CT) imaging noninvasively, but not yet on a localized scale. Therefore, the aim of the present study was to develop a method for quantification of local radiation-induced lung tissue damage using CT.

METHODS AND MATERIALS

CT images of the thorax were made 8 and 26 weeks after irradiation of 100%, 75%, 50%, and 25% lung volume of rats. Local lung tissue structure (S(L)) was quantified from local mean and local standard deviation of the CT density in Hounsfield units in 1-mm(3) subvolumes. The relation of changes in S(L) (DeltaS(L)) to histologic changes and breathing rate was investigated. Feasibility for clinical application was tested by applying the method to CT images of a patient with non-small-cell lung carcinoma and investigating the local dose-effect relationship of DeltaS(L).

RESULTS

In rats, a clear dose-response relationship of DeltaS(L) was observed at different time points after radiation. Furthermore, DeltaS(L) correlated strongly to histologic endpoints (infiltrates and inflammatory cells) and breathing rate. In the patient, progressive local dose-dependent increases in DeltaS(L) were observed.

CONCLUSION

We developed a method to quantify local radiation-induced tissue damage in the lung using CT. This method can be used in the development of more accurate predictive models for normal tissue complications.

Study on motion artifacts in coronary arteries with an anthropomorphic moving heart phantom on an ECG-gated multidetector computed tomography unit

Acquisition time plays a key role in the quality of cardiac multidetector computed tomography (MDCT) and is directly related to the rotation time of the scanner. The purpose of this study is to examine the influence of heart rate and a multisector reconstruction algorithm on the image quality of coronary arteries of an anthropomorphic adjustable moving heart phantom on an ECG-gated MDCT unit. The heart phantom and a coronary artery phantom were used on a MDCT unit with a rotation time of 500 ms. The movement of the heart was determined by analysis of the images taken at different phases. The results indicate that the movement of the coronary arteries on the heart phantom is comparable to that in a clinical setting. The influence of the heart rate on image quality and artifacts was determined by analysis of several heart rates between 40 and 80 bpm where the movement of the heart was synchronized using a retrospective ECG-gated acquisition protocol. The resulting reformatted volume rendering images of the moving heart and the coronary arteries were qualitatively compared as a result of the heart rate. The evaluation was performed on three independent series by two independent radiologists for the image quality of the coronary arteries and the presence of artifacts. The evaluation shows that at heart rates above 50 bpm the influence of motion artifacts in the coronary arteries becomes apparent. In addition the influence of a dedicated multisector reconstruction technique on image quality was determined. The results show that the image quality of the coronary arteries is not only related to the heart rate and that the influence of the multisector reconstruction technique becomes significant above 70 bpm. Therefore, this study proves that from the actual acquisition time per heart cycle one cannot determine an actual acquisition time, but only a mathematical acquisition time.

Multi-detector computed tomography and 3-dimensional imaging in a multi-vendor picture archiving and communications systems (PACS) environment

RATIONALE AND OBJECTIVES

To show the impact of the introduction of multi-detector computed tomography (CT) on radiologic workflow and to demonstrate how this reflects on picture archiving and communications systems (PACS) requirements.

MATERIALS AND METHODS

Production measurements were obtained from different CT scanners (first two single-slice CT scanners; from December 2001 single and 4-slice CT; from April 2002 single and 16-slice CT) in number of patients from the radiologic information system. Implications on our PACS were recorded in terms of images and studies stored. Furthermore, our PACS design was made so that optimal use of 3-dimensional imaging within the radiologic workflow was possible. Finally, the number of non-diagnosed studies were recorded every day since the start of the transition to a filmless radiology department.

RESULTS

This PACS design achieved a high level of integration between simple viewing and advanced 3-dimensional imaging and is optimized for handling large amounts of data. Overall increase of patients scanned with CT from January 2002-December 2003 was 54%. The number of series increased by 286% from December 2001-April 2003 and by 130% from April 2002-December 2003. From January 2002-February 2003, the number of images per patient increased from 175 to 450 (157%). Non-diagnosed studies decreased from about 100-120 before to practically zero after PACS implementation.

CONCLUSION

PACS significantly increases productivity because of availability of the images and elimination of certain manual tasks. These results show that although the amount of examinations increases significantly with the introduction of MDCT, simultaneous introduction of PACS and filmless operation allows radiologists to handle the growth in workload.