Sustainable spectrophotometric determination of antihypertensive medicines reducing COVID-19 risk via paired wavelength data processing technique - Assessment of purity, greenness and whiteness

Recent studies have reported that using certain antihypertensive therapies such as angiotensin II receptor blockers (ARBs) is associated with mitigation of fatal outcomes and enhancing clinical features of patients having hypertension during coronavirus pandemic. Thus, in the current work an innovative, effective, white and sustainable spectrophotometric technique called paired wavelength data processing technique (PWDPT) was developed for evaluation of recommended antihypertensive combination therapies incorporating candesartan cilexetil (CAN) and hydrochlorothiazide (HCT). This technique included three methods, namely, absorbance resolution (AR), amplitude resolution (PR) and ratio extraction (RE). Linearity ranges were (5.0 μg/mL - 50.0 μg/mL) and (2.0 μg/mL - 24.0 μg/mL) for CAN and HCT, respectively. Validation and confirmation of all suggested methods were conducted in accordance with ICH guidelines, producing satisfactory results within the accepted limits. Statistical comparison was achieved between the attained results from suggested methods and those attained from official methods, in which insignificant difference was existed. The suggested methods were successfully employed for identification of the studied drugs as well as determination of their spectral recognition and evaluation of the purity in their combined formulations. The proposed methods followed the principles of green analytical chemistry, where their greenness was evaluated and compared with the official potentiometric and HPLC methods via using four tools, namely, National Environmental Methods Index (NEMI), the Analytical Eco-Scale, the Green Analytical Procedure Index (GAPI) and Analytical greenness metric (AGREE) which affirmed the eco-friendly nature of the proposed methods. Moreover, studying the whiteness features was performed using the recently introduced RGB12 model. The acceptable results along with the sustainability, simplicity, affordability and low-cost of the proposed methods encourages their utilization in the quality control laboratories.

When is it safe to eat different broiler chicken tissues after administration of doxycycline and tylosin mixture?

Residues of veterinary drugs in poultry meat have serious health effects on humans (e.g., antimicrobial resistance, carcinogenicity, and hypersensitivity), which make the control of veterinary drug residues an important parameter in ensuring consumer protection.  This work was performed to quantitatively determine two co-formulated anti-infective veterinary agents, tylosin tartrate (TYT) and doxycycline hydrochloride (DOX) in different tissues of broiler chickens (liver, muscles, and fat) using high performance liquid chromatography. The chicken was treated with the recommended dose of a binary mixture of the drugs (Tydovet). Moreover, the study aimed to estimate the withdrawal time of both drugs in chicken tissues. The analysis was done by solvent extraction and solid-phase extraction for clean-up of samples from the tissue matrix, followed by liquid chromatographic determination of the cited drugs with UV-detection. Residue decline with time was tracked, and both antibiotics were found to be more persistent in liver tissues than other tissues (muscle and fat). The effect of freezing and cooking was investigated on tissue residue levels. While freezing had little effect on the concentration of both antibiotics; cooking, as anticipated, led to a marked decline. Therefore, it is recommended to pay attention to the proper withdrawal periods before marketing to ensure the hygienic suitability of broilers edibles for safe human consumption. PRACTICAL APPLICATION: This novel study measures tylosin and doxycycline residues simultaneously in different tissues (muscle, fat, and liver) after administration of Tydovet powder to the broiler chicken. Residues in fat persisted for a longer time than in muscle in case of TYT, whereas the reverse was noticed in DOX.

Simultaneous determination of mebeverine hydrochloride and chlordiazepoxide in their binary mixture using novel univariate spectrophotometric methods via different manipulation pathways

Smart, sensitive, simple and accurate spectrophotometric methods were developed and validated for the quantitative determination of a binary mixture of mebeverine hydrochloride (MVH) and chlordiazepoxide (CDZ) without prior separation steps via different manipulating pathways. These pathways were applied either on zero order absorption spectra namely, absorbance subtraction (AS) or based on the recovered zero order absorption spectra via a decoding technique namely, derivative transformation (DT) or via ratio spectra namely, ratio subtraction (RS) coupled with extended ratio subtraction (EXRS), spectrum subtraction (SS), constant multiplication (CM) and constant value (CV) methods. The manipulation steps applied on the ratio spectra are namely, ratio difference (RD) and amplitude modulation (AM) methods or applying a derivative to these ratio spectra namely, derivative ratio (DD(1)) or second derivative (D(2)). Finally, the pathway based on the ratio spectra of derivative spectra is namely, derivative subtraction (DS). The specificity of the developed methods was investigated by analyzing the laboratory mixtures and was successfully applied for their combined dosage form. The proposed methods were validated according to ICH guidelines. These methods exhibited linearity in the range of 2-28μg/mL for mebeverine hydrochloride and 1-12μg/mL for chlordiazepoxide. The obtained results were statistically compared with those of the official methods using Student t-test, F-test, and one way ANOVA, showing no significant difference with respect to accuracy and precision.

Chemometric quality assessment of Paracetamol and Phenylephrine Hydrochloride with Paracetamol impurities; comparative UV-spectrophotometric implementation of four predictive models

Spectrophotometric data analysis using multivariate approaches has many useful applications. One of these applications is the analysis of active ingredients in presence of impurities. Four chemometric-assisted spectrophotometric methods, namely, principal component regression (PCR), partial least-squares (PLS), artificial neural networks (ANN) and multivariate curve resolution-alternating least squares (MCR-ALS) were proposed and validated. The developed chemometric methods were compared to resolve the severely overlapped spectrum of Paracetamol (PAR) and Phenylephrine HCl (PHE) along with PAR impurities namely, P-Aminophenol (PAP), P-Nitrophenol (PNP), Acetanilide (ACT) and P-Chloroacetanilide (CAC). The four multivariate calibration methods succeeded in simultaneous determination of PAR and PHE with further quantification of PAR impurities. So, the proposed methods could be used with no need of any separation step and successfully applied for pharmaceutical formulation analysis. Furthermore, statistical comparison between the results obtained by the proposed chemometric methods and the official ones showed no significant differences.

Eco-friendly spectrophotometric evaluation of triple-combination therapies in the treatment strategy of patients suffering from hypertension during coronavirus pandemic - Spectralprint recognition study

Recent studies have reported that using certain antihypertensive therapies such as angiotensin II receptor blockers (ARBs) and calcium channel blocker (CCBs) is associated with reduction of fatal outcomes and improving clinical characteristics of patients suffering from hypertension during coronavirus pandemic. Thus, in the current work an effective, innovative and eco-friendly spectrophotometric manner namely, parent spectrum extraction (PSE)was established for evaluation of recommended triple antihypertensive combination therapies incorporate valsartan (VAL) as ARBs, amlodipine besylate as CCBs (AML) and hydrochlorothiazide (HCT)as diuretic into single-pill in challengeable ratio. PSE manner composed of two complementary steps, auxiliary resolution coupled with data analysis resolution(DAR)and it is characterized by resolving the spectral bands of the drugs and extraction of their discrete parent spectra (D⁰); accordingly, enabling determination of each analyte at its λ_max. Auxiliary resolution of AML in triple mixture was applied to decrease complexity of overlapped spectra via constant multiplication (CM) followed by spectrum subtraction (SS) to obtain resolved mixture of VAL and HCT while data analysis resolution (DAR) of this binary mixture was applied via one of three novel methods namely, absorbance extraction (AE), peak-amplitude extraction (PE) and ratio extraction (RE) along with SS method. The proposed methods had analyzed VAL, AML and HCT in the range of 4.0-44.0 µg/mL, 4.0-40.0 µg/mL and 2.0-24.0 µg/mL, respectively with an excellent correlation coefficient (r ≥ 0.9999). Further, the proposed methods in PSR manner were validated as stated by ICH guidelines and it was found that accuracy and precision results are within the acceptable limit. The suggested procedures were effectively utilized for the concurrent quantification of VAL, AML and HCT in synthetic mixtures and tablets. The greenness of the proposed spectrophotometric methods was evaluated by National Environmental Methods Index (NEMI), the Analytical Eco-Scale, the Green Analytical Procedure Index (GAPI) and Analytical greenness metric (AGREE) where the four tools affirmed the eco-friendly nature of the proposed methods. A comparison between the outcomes of the studied methods with the official and reported ones was performed and no statistical difference was arisen between the methods regarding to accuracy and precision.The achieved results along with the simplicity, affordability and low-cost of the proposed methods recommended their appropriateness for the regular quality control examination and analysis of pure materials and pharmaceutical formulations as well as their applicability for the spectralprint recognition of the studied drugs.

Sustainable chromatographic quantitation of multi-antihypertensive medications: application on diverse combinations containing hydrochlorothiazide along with LC-MS/MS profiling of potential impurities: greenness and whiteness evaluation

Cardiovascular disorders are among the leading causes of death worldwide, especially hypertension, a silent killer syndrome requiring multiple drug therapy for appropriate management. Hydrochlorothiazide is an extensively utilized thiazide diuretic that combines with several antihypertensive drugs for effective treatment of hypertension. In this study, sustainable, innovative and accurate high performance liquid chromatographic methods with diode array and tandem mass detectors (HPLC-DAD and LC-MS/MS) were developed, optimized and validated for the concurrent determination of Hydrochlorothiazide (HCT) along with five antihypertensive drugs, namely; Valsartan (VAL), Amlodipine besylate (AML), Atenolol (ATN), Amiloride hydrochloride (AMI), and Candesartan cilextil (CAN) in their diverse pharmaceutical dosage forms and in the presence of Chlorothiazide (CT) and Salamide (DSA) as HCT officially identified impurities. The HPLC-DAD separation was achieved utilizing Inertsil ODS-3 C18 column (250 × 4.6 mm, 5 μm) attached with photodiode array detection at 225.0 nm. Gradient elution was performed utilizing a mixture of solvent A (20.0 mM potassium dihydrogen phosphate, pH 3.0 ± 0.2, adjusted with phosphoric acid) and solvent B (acetonitrile) at ambient temperature. Linearity ranges were 0.1-100.0 µg/mL for HCT, VAL, AML and CAN, 0.05 -100.0 µg/mL for both ATN and AMI and 0.05-8.0 µg/mL for both CT and DSA. Additionally, this work describes the use of liquid chromatography-electrospray-tandem mass spectrometry for the accurate detection and quantification of the impurities; CT and DSA in the negative mode utilizing triple quadrupole mass spectrometry. The linearity ranges for those impurities were 1.0-200.0 ng/mL and 5.0-200.0 ng/mL for CT and DSA, respectively. Developed methods' validation was achieved in accordance with International Conference on Harmonization (ICH) guidelines. Upon applying liquid chromatographic techniques for the drug analysis, a green and sustainable assessment have to be handled due to the consumption of energy and many solvents. Through the use of the HEXAGON, Analytical Greenness (AGREE) and White Analytical Chemistry (WAC) tools, greenness and sustainability have been statistically assessed. The optimized HPLC-DAD and LC-MS/MS methods were fast, accurate, precise, and sensitive, and consequently could be applied for conventional analysis and quality control of the proposed drugs in their miscellaneous dosage forms for the purpose of reducing laboratory wastes, time of the analysis time, effort, and cost.

Spectral manipulation of ratio data for simultaneous determination of binary mixture of Paracetamol and Phenylephrine Hydrochloride

Three ratio spectra manipulating spectrophotometric methods have been developed for determination of Paracetamol (PAR) and Phenylephrine HCl (PHE) in bulk powder and in pharmaceutical formulation. Linear correlations were obtained over the concentration range of 1.0-25.0 µg/mL and 5.0-50.0 µg/mL for PAR and PHE, respectively. The first method is the ratio subtraction method (RS) coupled with constant multiplication (CM) in which PHE was determined by ratio subtraction and PAR was determined by constant multiplication. The second method is the ratio difference method (RD) which depends on measuring the difference between the amplitudes of the ratio spectra at two selected wavelengths. The third method is the first derivative of the ratio spectra (¹DD), which allows the determination of PAR at 238.8 and 243 nm and PHE at 213.2, 222.2, 271.8 and 286 nm. The proposed methods are simple, accurate and precise (RSD does not exceed 2%). The applicability of the proposed methods was successfully verified by the analysis of PAR and PHE in pharmaceutical formulation without interference of the dosage form additives. Furthermore, the developed methods were validated according to ICH guidelines, so they are considered to be potential competitors for the analysis of the mixture in quality control labs and pharmaceutical factories.

A Thorough HPLC Assay of Quaternary Veterinary Formulation coupled with Environmental Assessment Tool

A new and accurate reversed phase HPLC method with UV detection has been established for any veterinarian analyst for simultaneous determination of a veterinary quaternary mixture of sulphadimidine sodium (SDS), sulphaquinoxaline sodium (SQS), diaveridine (DVD) and vitamin K3 (VTK3) in their formulation. The stationary phase was SEA C18 column (250 × 4.6 mm i.d., 5 μm particle size) at 25°C with an isocratic mode, using a mobile phase containing a mixture of methanol:acetonitrile:distilled water in the ratio of (20:20:60, by volume). The flow rate was 0.8 mL min-1, and UV detection was performed at 230 nm. The HPLC assay was coupled with Environmental Assessment Tool (EAT), which represents a simple and proficient approach for profiling the greenness of the method. This takes into consideration the environmental, health and safety issues for all solvents that involved in the chromatographic method and calculates a total score that can be used for comparison of the greenness of different methods. The method was found to be linear over (0.5-30) μg/mL for all cited drugs with mean percentage recoveries (99.56 ± 1.141) for VTK3, (99.56 ± 1.056) for DVD, (99.62 ± 1.482) for SDS and (99.52 ± 1.205) for SQS. The results were statistically compared with those of the official and reported methods; using Student's t-test and F-test, showing no significant difference with respect to accuracy. Specificity of the applied method was assessed by analyzing the laboratory-prepared mixtures. The developed method was validated according to ICH guidelines. The proposed methodology can be applied for rapid routine assay of this combination.

Chromatographic estimation of a novel triple-therapy combination targeting Helicobacter pylori eradication in different matrices

Aim: Helicobacter pylori infection is a prevalent global bacterial infection that can potentially exaggerate symptoms of other serious infections like SARS-CoV-2 (COVID-19). Methodology: Herein, an efficient, accurate and cost-effective high-performance liquid chromatography-diode array detector method was developed and validated for determination of the novel triple therapy combination of tinidazole (TD), clarithromycin (CLR) and lansoprazole (LAN) in different analytical matrices (pharmaceutical formulation, dissolution media and spiked human plasma). Results: Successful chromatographic separation was achieved using Agilent Microsorb-MV 100-5 CN column (250 × 4.6 mm, 5 μm) and a mobile phase consisted of acetonitrile and 10.0 mM phosphate buffer, pH 7.5 ± 0.1 at flow rate of 1 ml/min via gradient elution. UV-detection was accomplished at 210.0 nm for CLR and 290.0 nm for TD and LAN. Conclusion: The developed method clearly provides a reliable, beneficial and cost-effective tool for quality control, dissolution testing and biological applications of the mentioned drugs.

Green analytical chemistry and experimental design: a combined approach for the analysis of zonisamide

Green analytical chemistry principles, as well as experimental design, are a combined approach adopted to develop sensitive reproducible stability indicating HPLC method for Zonisamide (ZNS) determination. The optimal conditions for three chromatographic parameters were determined using a central composite design of the response surface. Kromasil C₁₈ column (150 mm × 4.6 mm, 5 µm) was utilized with ethanol, H₂O (30:70 v/v) as a mobile phase at a flow rate of 1 mL/min at 35 °C. Good reproducibility and high sensitivity were achieved along (0.5-10 µg/mL) concentration range. In contrast, the TLC-densitometric method was performed on aluminum plates precoated with silica gel 60F₂₅₄ as a stationary phase and chloroform: methanol: acetic acid (8:1.5:0.5 by volume) as a developing system. Reproducible results were obtained in the range of (2-10 μg/band). The chromatograms of HPLC and TLC were scanned at 280 nm and 240 nm, respectively. The suggested methods have been validated following ICH guidelines, and no statistically significant differences were detected between the results of the current study and the official USP method. It was also found that using experimental design implements the green concept by reducing the environmental impact. Finally, Eco-Scale, GAPI and AGREE were used to assess the environmental impacts of the suggested methods.

Impact Study of Mathematical Manipulation on the Resolution Efficiency of the Spectrophotometric Technique-An Application on Veterinary Binary Mixture with Overlapping Absorption Bands

BACKGROUND

The impact of mathematical manipulation on the efficiency of smart spectrophotometric approaches was considered for analyzing a veterinary binary mixture of tylosin tartrate (TYT) and doxycycline hydrochloride (DOX).

OBJECTIVE

Based on subtraction which can be response subtraction via numerical factor calculation between two wavelengths.

METHOD

Absorbance subtraction (AS) and amplitude summation (A-Sum), or subtraction of constant value or spectrum, was used to eliminate the contribution of the interfering component, as is done in spectrum subtraction (SS), extended ratio subtraction (EXRS), ratio subtraction (RS), and derivative subtraction (DS), or multiplication of a constant value by the divisor to get the spectrum of one component, or division by the normalized spectrum to modulate the original absorption spectrum to concentration as in concentration value and also detected in amplitude modulation (AM). The derivative transformation method (DT) is a form of mathematical manipulation that transforms a derivative to its original absorption form.

RESULTS

The consumption of these methods will become more significant in quality control departments for the repetitive quantitative analysis of different veterinary products in both research and industry laboratories. Some manipulations may be used for simultaneous analysis of DOX and TYT, such as absorbance subtraction, amplitude modulation, ratio subtraction and derivative subtraction coupled with spectrum subtraction, concentration value, and amplitude summation, while others may be used for DOX only, such as derivative transformation and constant value.

CONCLUSIONS

The recovery percentages confirmed that the accuracy and the reproducibility were approved by the following ICH guidelines.

HIGHLIGHTS

1. Partitioning methods: which perfectly divide the drugs response at the iso-point such as amplitude modulation, absorbance subtraction and amplitude summation. 2. Extracting methods: which easily calculate zero-order of the two cited drugs in such as ratio subtraction were coupled with extended ratio subtraction method (RS-EXRS), spectrum subtraction (SS), constant multiplication method (CM) or extract their derivative spectra such as derivative subtraction. 3. Transforming methods: which able to change the derivatized spectrum to its original zero spectra such as derivative transformation. 4. Graphical methods: which directly measure the concentration of the drugs from the chart.

Advanced Spectrophotometric Resolution Techniques for a Spectrally Overlapping Spasmolytic Binary Mixture along with Dichloroaniline as a Toxic Impurity: Application to Content Uniformity Testing

BACKGROUND

Irritable bowel syndrome (IBS) is a common disorder leading to undesirable pain. Phloroglucinol (PHG) and trimethylphloroglucinol (TMG) are co-formulated as spasmolytic medication that is considered to be effective in reducing smooth muscle spasm. 3,5-Dichloroaniline (DCL) is a specified PHG pharmacopoeial impurity which needs to be monitored to avoid its toxic effects.

OBJECTIVE

Different smart approaches are presented to provide simple, reliable, and economic spectrophotometric methods able to resolve the severe overlap in the spectra of PHG and TMG in their pure and pharmaceutical forms, in addition to their estimation in the presence of DCL as a toxic impurity of PHG without any need for initial separation.

METHODS

The presented work includes univariate methods, derivative ratio (DR), ratio difference (RD), mean centering (MCR) and deconvulated Fourier method (DF), which were able to determine PHG and TMG simultaneously in their binary mixture. Firstly, DCL was estimated in the zero order, where the two drugs have zero absorption at 247.0 nm, and then its contribution was eliminated by applying ratio subtraction method. Multivariate chemometric partial least squares (PLS) and principal component regression (PCR) models were also applied to determine PHG and TMG simultaneously in the presence of the impurity, DCL.

RESULTS

Univariate methods were applied in the range 5.0-30.0, 2.5-25.0, and 1.0-12.0 µg/mL for PHG, TMG, and DCL, respectively. The proposed chemometric models were used in the range 6.0-14.0, 5.0-25.0 and 2.0-10.0 µg/mL for PHG, TMG, and DCL, respectively. These analytical approaches succeeded in estimating the cited drugs in their pharmaceutical formulation and assessing content uniformity of dosage units. The methods were statistically compared with a reported HPLC method, and the results revealed no significance statistical difference.

CONCLUSION

This work provides for the first time successful univariate and multivariate PLS and PCR methods to assess PHG and TMG in the presence of DCL as a toxic impurity along with content uniformity testing of dosage units.

HIGHLIGHTS

Comparative univariate and multivariate spectrophotometric analytical approaches are presented, for the first time, for estimation of spasmolytic formulation of PHG and TMG in the presence of DCL as a PHG toxic impurity. Successful application to content uniformity testing of Stopspasm® dosage form is demonstrated. A statistical study, including t-tests and one-way analysis of variance (ANOVA), was conducted.

Continuous wavelet transform for solving the problem of minor components in quantitation of pharmaceuticals: a case study on the mixture of ibuprofen and phenylephrine with its degradation products

The presence of minor components represents a challenging problem in spectrophotometric analysis of pharmaceuticals. If one component has a low absorptivity or present in a low concentration compared to the other components, this will hinder its quantitation by spectrophotometric methods. Continuous Wavelet Transform (CWT) as a signal processing technique was utilized to figure out a solution to such a problem. A comparative study was established between traditional derivative spectrophotometry (Numerical Differentiation, ND) and CWT to indicate the advantages and limitations of each technique and possibility of solving the problem of minor components. A mixture of ibuprofen (IBU) and phenylephrine (PHE) with its degradation products forming a ternary mixture was used for comparing the two techniques. The two techniques were applied on raw spectral data and on ratio spectra data resulting in four methods, namely ND, CWT, Derivative Ratio-Zero Crossing (DRZC) and Continuous Wavelet Transform Ratio-Zero Crossing (CWTR-ZC) methods. By comparing the results in laboratory prepared mixtures, CWT technique showed advantages in analysis of mixtures with minor components than ND. The proposed methods were validated according to the ICH guideline Q2(R1), where their linearity was established with correlation coefficient ranging from 0.9995 to 0.9999. The linearity was in the range 3-40 μg/mL for PHE in all methods, while for IBU it was 20-180 and 30-180 μg/mL in CWT and ND methods, respectively. The CWT methods were applied for quantitative determination of the drugs in their dosage form showing the ability of the methods to quantitate minor components in pharmaceutical formulations.

Comprehensive comparative study of eco-friendly Univariate and multivariate methodological approaches on processing multi-component formulation quality

This study presents comprehensive comparative study of different eco-friendly spectrophotometric approaches without any sample treatment on processing quaternary mixture of sulphadimidine sodium (SDS), sulphaquinoxaline sodium (SQS), diaveridine (DVD) and vitamin K₃ (VTK₃). The different univariate complementary resolutions according to the response used for the assay of the cited drugs after applying the processing steps were implemented using successive ratio subtraction coupled with constant multiplication (SRS-CM), absorbance subtraction (AS) and amplitude modulation (AM). On the other hand, multivariate spectrophotometric models were developed and validated for simultaneous determination of the cited mixture. Resolution was accomplished by using two multivariate calibration greener models, including principal component regression (PCR) and partial least-squares (PLS). The proposed approaches are considered environmentally friendly since they use only water as reagent, which is cheap and safe for the operator. The calibration graphs are linear over the range of (4.0-13.0) μg/mL for (SDS), (1.0-10.0) μg/mL for (SQS), (1.0-11.0) μg/mL for (DVD) and (1.0-8.0) μg/mL for (VTK₃). Specificity of the applied procedures was assessed by analyzing the laboratory-prepared mixtures and their combined dosage form. The outcomes of the developed methods were statistically compared with those of the official and reported methods; using Student's t-test and F-test, showing no significant difference. The proposed methodologies can be used for the routine analysis of the cited drugs in quality control laboratories.

Development of an eco-friendly HPLC method for the stability indicating assay of binary mixture of ibuprofen and phenylephrine

The development and validation of the stability indicating HPLC technique has contributed to the understanding of the stability profile of ibuprofen (IBU) and phenylephrine (PHE). Stability profile was achieved for PHE; the drug was found to be liable to be influenced by stress oxidative conditions; two oxidative degradants (Deg1 & Deg2) were formed and their structures were confirmed using IR and mass spectrometry. The drugs and degradation products were successfully separated using a gradient elution method on YMC-C8 column with 0.1% hexanesulfonic acid and acetonitrile as a mobile phase at pH 6.6. The flow rate was 1.0 mL/min, and a diode array detector operating at 220 nm was used for UV detection. The retention times of degradants Deg1, Deg2, ibuprofen (IBU), and phenylephrine hydrochloride (PHE) were 2.0, 2.2, 3.2 and 7.0 min, respectively. The proposed method was validated with respect to linearity, accuracy, precision, specificity, and robustness using ICH guidelines. The linearities of ibuprofen and phenylephrine hydrochloride were in the range of 10-100 μg/mL and 0.3-10 μg/mL, respectively. The % recoveries of the two drugs were found to be 100.75 ± 1.44%, 99.67% ± 1.67, and the LOD was found to be 2.75/mL and 0.09/mL for IBU, and PHE, respectively. The method was successfully applied to the estimation of ibuprofen and phenylephrine hydrochloride combination in pharmaceutical dosage form. The proposed technique was validated using ICH guidelines and its greenness was assessed according to Analytical Eco Scale metric (AES). Molecular docking was used to assess the two drugs and PHE oxidative degradants interaction with the stationary phase and to confirm the outcomes of the proposed method with regard to the order of elution of the two drugs and PHE degradation products. Eco-friendly and environmental safety were assessed through the application of one of the most applicable greenness assessment tool; Analytical Eco Scale metric (AES).

Implementation of different separation techniques for resolving ternary mixture of Paracetamol, Pseudoephedrine Hydrochloride and Chlorpheniramine maleate with further quantification

Due to the wide applicability of separation techniques that rely on the property of differential migration in pharmaceutical formulations analysis, different analytical strategies have been proposed to resolve mixtures of multi-components pharmaceuticals. Three separation methods were developed and validated for the simultaneous determination of Paracetamol (PAR), Pseudoephedrine HCl (PSE) and Chlorpheniramine maleate (CHP). The first method is a thin-layer chromatographic (TLC) separation, followed by densitometric measurement. The separation was carried out on aluminium sheet of silica gel 60 F254 using ethanol:chloroform:ammonia (1:7:0.4, by volume) as the mobile phase. Determination of PAR, PSE and CHP was successfully applied over the concentration ranges of 3–25 µg/band, 0.5–10 µg/band and 0.1–6 µg/band, respectively. The second method is HPLC separation that was achieved on C18 column using the mobile phase acetonitrile:phosphate buffer pH 5 (10:90, v/v) at a flow rate 1 mL min−1. PAR, PSE and CHP were determined by HPLC in concentration ranges of 5–400 μg mL−1, 2–40 μg mL−1 and 0.5–16 μg mL−1, respectively. The third method is a capillary electrophoresis (CE) separation. The electrophoretic separation was achieved using 20 mM phosphate buffer (pH 6.5) at 20 kV. The linearity was reached over concentration ranges of 30–250 μg mL−1, 5–50 μg mL−1 and 0.8–20 μg mL−1 for PAR, PSE and CHP, respectively. The developed methods were validated with respect to linearity, precision, accuracy and system suitability. The proposed methods were successfully applied for bulk powder and dosage form analysis with RSD of precision <2%. Moreover, statistical comparison with the official methods confirms the methods' validity.

OUP accepted manuscript

Background

Common cold and cough preparations represent a huge segment of the global pharmaceutical market. Recently, cold/cough formulations containing paracetamol (PAR) have attracted significant attention as PAR has been implemented into the supportive treatment of mild cases of COVID-19 as the first-line antipyretic. From a literature review, no method has been reported yet for simultaneous estimation of PAR, pseudoephedrine hydrochloride (PSE) and carbinoxamine maleate (CRX) in any matrix. Thus, there is an urgent need for smart and green methods that would enable quantification of the cited components in their challenging ratio.

Objectives

The aim of this work is to develop and validate the first UV spectrophotometric methods for simultaneous determination of the selected drugs taking into consideration the list of challenges including the highly overlapping features and spectral interferences in the cited mixture.

Methods

Namely, the proposed methods are: direct spectrophotometry, dual wavelength, first derivative, derivative ratio, ratio difference, constant center coupled with spectrum subtraction, and the constant multiplication method paired with spectrum subtraction.

Results

These methods were linear over the concentration range of 2.5–35 μg/mL, 1.5–20 μg/mL, and 4.5–35 μg/mL for PAR, PSE and CRX, respectively. These methods fulfill the validity parameters according to International Conference on Harmonization (ICH) guidelines. The results obtained were statistically benchmarked to the official ones where no significant difference was noticed.

Conclusion

The developed methods are successfully applied for concurrent quantification of the studied components in the marketed dosage form without interference from matrix excipients. The impact on the environment was assessed by five green metrics, namely a recent Analytical greenness (AGREE) metric algorithm based on the green analytical chemistry framework, Green Analytical Procedure Index (GAPI), Eco-Scale, Assessment of Green Profile (AGP), and National Environmental Methods Index (NEMI).

Highlights

Eco-friendly and successive spectrophotometric methods were firstly developed in this work, for the simultaneous quantification of PAR, PSE and CRX. These approaches incorporate a simple enrichment-aided technique to augment their spectrophotometric signals, facilitating the accurate quantitation of the minor component in the cited mixture.

Three developed spectrophotometric methods for determination of a mixture of ofloxacin and ornidazole; application of greenness assessment tools

This work is dedicated to the greenness estimation of three proposed spectrophotometric techniques [e.g., ratio difference (RD), mean centering of ratio spectra (MCR) and continuous wavelet transform of ratio spectra (CWT)] for the determination of a binary combination named Ofloxacin (OFL) and Ornidazole (ORN). Applying the green analytical chemistry methods to assess the proposed methods has widely attained the analytical community care. The greenness assessment was performed via three evaluation approaches; the "Analytical Eco-Scale", the "National Environmental Method Index" (NEMI) and "Green Analytical Procedure Index" (GAPI). Following the examination of the zero spectrum of OFL and ORN, it is observed that OFL and ORN spectra are overlapped, so they can be detected by the methods mentioned previously. The ratio difference method was carried out at wavelengths of 294.6 nm and 265.6 nm for OFL, 292 nm and 315 nm for ORN. The linear range was (2-15 µg/mL) for OFL and (3-30 µg/mL) for ORN. The MCR method based on the use of mean centered ratio spectra in dual steps and calculating the second ratio spectra mean centered values at 294.6 nm for OFL and 315 nm for ORN. The continuous wavelet transformation which carried out using MATLAB at wavelengths of 265 nm for OFL and 306 for ORN. These techniques were intended for the binary mixture analysis in bulk powder and pharmaceutical formulations with high recoveries. The developed methods were validated according to ICH guidelines. All techniques were statistically compared to either an official method for OFL or a reported method for ORN and the results indicate that there were not any significant differences.