The importance of species-specific and temperature-sensitive parameterisation of A/Ci models: A case study using cotton (Gossypium hirsutum L.) and the automated 'OptiFitACi' R-package

Leaf gas exchange measurements are an important tool for inferring a plant's photosynthetic biochemistry. In most cases, the responses of photosynthetic CO2 assimilation to variable intercellular CO2 concentrations (A/Ci response curves) are used to model the maximum (potential) rate of carboxylation by ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco, Vcmax) and the rate of photosynthetic electron transport at a given incident photosynthetically active radiation flux density (PAR; JPAR). The standard Farquhar-von Caemmerer-Berry model is often used with default parameters of Rubisco kinetic values and mesophyll conductance to CO2 (gm) derived from tobacco that may be inapplicable across species. To study the significance of using such parameters for other species, here we measured the temperature responses of key in vitro Rubisco catalytic properties and gm in cotton (Gossypium hirsutum cv. Sicot 71) and derived Vcmax and J2000 (JPAR at 2000 µmol m-2 s-1 PAR) from cotton A/Ci curves incrementally measured at 15°C-40°C using cotton and other species-specific sets of input parameters with our new automated fitting R package 'OptiFitACi'. Notably, parameterisation by a set of tobacco parameters produced unrealistic J2000:Vcmax ratio of <1 at 25°C, two- to three-fold higher estimates of Vcmax above 15°C, up to 2.3-fold higher estimates of J2000 and more variable estimates of Vcmax and J2000, for our cotton data compared to model parameterisation with cotton-derived values. We determined that errors arise when using a gm,25 of 2.3 mol m-2 s-1 MPa-1 or less and Rubisco CO2-affinities in 21% O2 (KC 21%O2) at 25°C outside the range of 46-63 Pa to model A/Ci responses in cotton. We show how the A/Ci modelling capabilities of 'OptiFitACi' serves as a robust, user-friendly, and flexible extension of 'plantecophys' by providing simplified temperature-sensitivity and species-specificity parameterisation capabilities to reduce variability when modelling Vcmax and J2000.

Monitoring Groundwater Health Using Citizen Scientists in Semi-Arid Regional Australia

Citizen science (CS) around the world is undergoing a resurgence, potentially due to the utilization of new technologies and methods to capture information, such as data and photo entry via mobile phone apps. CS has been used in aquatic ecology for several decades, however the use of volunteers to collect data in groundwaters has rarely occurred. Groundwater research, particularly groundwater ecosystems, is unevenly distributed across the world, limiting our knowledge of these ecosystems and their functions. Here, we engaged six volunteer farmers in semi-arid region of north-western New South Wales, Australia to participate in an assessment of groundwater health using privately owned wells. Volunteers were supplied with sampling kits and instructions on sampling methods. Data retrieved indicated the health of the groundwater ecosystems, simultaneously providing information on water quality and groundwater biota present within the farm aquifers. Diverse stygofauna were collected from the trial, which reflected historical records of stygofauna within the same catchment indicating the viability of using citizen scientist for data collection. The citizen science project not only aided the collection of data and assessment of groundwater health, but also provided a tool for education, attracting media attention which furthered the education to a national audience. The amount of data still required to understand groundwater ecosystems, combined with the urgency to manage these environments, suggests that citizen scientists may complement the efforts of scientists around the globe to establish the impacts and consequences of human activities on this resource.

Frequency and diversity of indoxacarb resistance in Australian Helicoverpa armigera (Lepidoptera: Noctuidae)

Annual indoxacarb resistance in Helicoverpa armigera (Hübner) populations collected from various crops in Australia was monitored between 2013 and 2023. Resistance frequency determined by F2 screening using a predetermined discriminating dose of indoxacarb, was lowest in the 2013-2014 and 2015-2016 seasons at 0.0164 and 0.0246, respectively. Resistance then increased significantly to a ten-year high of 0.0869 in 2018-2019 but declined to 0.0557 in 2019-2020 during a severe drought, remaining relatively stable thereafter to 2023. Indoxacarb resistance was first detected in H. armigera collected from maize in the Gwydir valley, New South Wales, in 2013 (strain GY7-39). In 2017, a second indoxacarb resistant H. armigera strain (UN1U3-10) was isolated from a population collected in chickpeas in the Liverpool Plains, New South Wales. Indoxacarb resistance of this strain was characterized to evaluate its potential to compromise the ongoing effectiveness of insecticide resistance management strategies in Australian farming systems. Survival at the discriminating dose of indoxacarb in UN1U3-10 was 28.9, 52.6, 86.7, and 92.9% in the F2, F3, F4, and F5, respectively. Following introgression with a susceptible strain and reselection with the discriminating dose of indoxacarb, the resistance ratio of UN1U3-10 was approximately 800-fold. Resistance was autosomal, incompletely dominant and conferred by more than 1 locus. While indoxacarb resistance in UN1U3-10 did not confer to emamectin benzoate or spinetoram and there was no evidence of major cross-resistance to the Bt toxins Cry1A, Cry2A or Vip3A, there was 5-fold reduced sensitivity to chlorantraniliprole. Indoxacarb resistance was suppressed by approximately 10-fold by PBO with no synergism by TPP or DEM, suggesting the involvement of cytochrome P450 enzymes. A stability analysis indicated a fitness cost may be associated with the genes that confer resistance in the UN1U3-10 strain. The potential risk for diverse indoxacarb resistance in the Australian H. armigera population is discussed.

Insecticide resistance in Australian Spodoptera frugiperda (J.E. Smith) and development of testing procedures for resistance surveillance

Spodoptera frugiperda (J.E. Smith) is a highly invasive noctuid pest first reported in northern Australia during early 2020. To document current status of resistance in S. frugiperda in Australia, insecticide toxicity was tested in field populations collected during the first year of establishment, between March 2020 and March 2021. Dose-response was measured by larval bioassay in 11 populations of S. frugiperda and a susceptible laboratory strain of Helicoverpa armigera. Emamectin benzoate was the most efficacious insecticide (LC50 0.023μg/ml) followed by chlorantraniliprole (LC50 0.055μg/ml), spinetoram (LC50 0.098μg/ml), spinosad (LC50 0.526μg/ml), and methoxyfenozide (1.413μg/ml). Indoxacarb was the least toxic selective insecticide on S. frugiperda (LC50 3.789μg/ml). Emamectin benzoate, chlorantraniliprole and methoxyfenozide were 2- to 7-fold less toxic on S. frugiperda compared with H. armigera while spinosyns were equally toxic on both species. Indoxacarb was 28-fold less toxic on S. frugiperda compared with H. armigera. There was decreased sensitivity to Group 1 insecticides and synthetic pyrethroids in S. frugiperda compared with H. armigera: toxicity was reduced up to 11-fold for methomyl, 56 to 199-fold for cyhalothrin, and 44 to 132-fold for alpha cypermethrin. Synergism bioassays with metabolic inhibitors suggest involvement of mixed function oxidase in pyrethroid resistance. Recommended diagnostic doses for emamectin benzoate, chlorantraniliprole, spinetoram, spinosad, methoxyfenozide and indoxacarb are 0.19, 1.0, 0.75, 6, 12 and 48μg/μl, respectively.

Realities and hopes in the application of microbial tools in agriculture

The use of microbial tools to sustainably increase agricultural production has received significant attention from researchers, industries and policymakers. Over the past decade, the market access and development of microbial products have been accelerated by (i) the recent advances in plant-associated microbiome science, (ii) the pressure from consumers and policymakers for increasing crop productivity and reducing the use of agrochemicals, (iii) the rising threats of biotic and abiotic stresses, (iv) the loss of efficacy of some agrochemicals and plant breeding programs and (v) the calls for agriculture to contribute towards mitigating climate change. Although the sector is still in its infancy, the path towards effective microbial products is taking shape and the global market of these products has increased faster than that of agrochemicals. Promising results from using microbes either as biofertilizers or biopesticides have been continually reported, fuelling optimism and high expectations for the sector. However, some limitations, often related to low efficacy and inconsistent performance in field conditions, urgently need to be addressed to promote a wider use of microbial tools. We propose that advances in in situ microbiome manipulation approaches, such as the use of products containing synthetic microbial communities and novel prebiotics, have great potential to overcome some of these current constraints. Much more progress is expected in the development of microbial inoculants as areas such as synthetic biology and nano-biotechnology advance. If key technical, translational and regulatory issues are addressed, microbial tools will not only play an important role in sustainably boosting agricultural production over the next few decades but also contribute towards other sustainable development goals, including job creation and mitigation of the impacts of climate change.

Gene expression in response to glyphosate treatment in fleabane (Conyza bonariensis) - glyphosate death response and candidate resistance genes

BACKGROUND

This study takes a whole-transcriptome approach to assess gene expression changes in response to glyphosate treatment in glyphosate-resistant fleabane. We assessed gene expression changes in both susceptible and resistant lines so that the glyphosate death response could be quantified, and constitutively expressed candidate resistance genes identified. There are three copies of the glyphosate target site (5-enolpyruvylshikimate-3-phosphate; EPSPS) gene in Conyza and because Conyza bonariensis is allohexaploid, there is a baseline nine copies of the gene in any individual.

RESULTS

Many genes were differentially expressed in response to glyphosate treatment. Known resistance mutations are present in EPSPS2 but they are present in a glyphosate-susceptible line as well as resistant lines and therefore not sufficient to confer resistance. EPSPS1 is expressed four times more than EPSPS2, further reducing the overall contribution of these mutations.

CONCLUSION

We demonstrate that glyphosate resistance in C. bonariensis is not the result of EPSPS mutations or overexpression, but due to a non-target-site mechanism. A large number of genes are affected by glyphosate treatment. We present a list of candidate non-target-site-resistance (NTSR) genes in fleabane for future studies into these mechanisms. © 2017 Society of Chemical Industry.