Design of a dual-band terahertz metamaterial absorber using two identical square patches for sensing application

A dual-band terahertz metamaterial absorber composed of two identical square metallic patches and an insulating medium layer on top of a continuous metallic ground is demonstrated. Two resonance peaks (labeled A and B) with near 100% absorbance are obtained, of which peak A derived from the localized resonance of the two square patches has a line-width of 0.2571 THz and quality factor of 6.9156, while peak B which resulted from the hybrid coupling of the localized resonance of the two square patches and surface lattice resonance of the device has a very narrow line-width of 0.0083 THz and large quality factor of 296.2771. Narrow line-width and large quality factor have important prospects in sensing application. Based on this, the sensing performance of the device is explored; it is revealed that peak B exhibits highly sensitive sensing ability (including a sensing sensitivity of 1.9010 THz per RIU and figure of merit of 229.04) in terms of the surrounding index. In addition, the influence of structural parameters on the absorption performance is discussed to further verify the formation mechanism of these two absorption peaks.

Engineered extracellular vesicles mediated CRISPR-induced deficiency of IQGAP1/FOXM1 reverses sorafenib resistance in HCC by suppressing cancer stem cells

BACKGROUND

Sorafenib resistance poses therapeutic challenges in HCC treatment, in which cancer stem cells (CSCs) plays a crucial role. CRISPR/Cas9 can be utilized as a potential technique to overcome the drug resistance. However, a safe, efficient and target specific delivery of this platform remains challenging. Extracellular vesicles (EVs), the active components of cell to cell communication, hold promising benefits as delivery platform.

RESULTS

Herein we report the normal epithelial cell -derived EVs engineered with HN3(HLC9-EVs) show competing tumor targeting ability. Anchoring HN3 to the membrane of the EVs through LAMP2, drastically increased the specific homing of HLC9-EVs to GPC3⁺Huh-7 cancer cells rather than co-cultured GPC3^-LO2 cells. Combination therapy of HCC with sorafenib and HLC9-EVs containing sgIF to silence IQGAP1 (protein responsible for reactivation of Akt/PI3K signaling in sorafenib resistance) and FOXM1 (self-renewal transcription factor in CSCs attributed to sorafenib resistance), exhibited effective synergistic anti-cancer effect both in vitro and in vivo. Our results also showed that disruption of IQGAP1/FOXM1 resulted in the reduction of CD133⁺ population that contribute to the stemness of liver cancer cells.

CONCLUSION

By reversing sorafenib resistance using combination therapeutic approach with engineered EVs encapsulated CRISPR/Cas9 and sorafenib, our study foreshadows a path for a better, accurate, reliable and successful anti-cancer therapy in the future.

Fluorescence imaging-guided cancer photothermal therapy using polydopamine and graphene quantum dot-capped Prussian blue nanocubes

In recent years, imaging-guided photothermal tumor ablation has attracted intense research interest as one of the most exciting strategies for cancer treatment. Herein, we prepared polydopamine and graphene quantum dot-capped Prussian blue nanocubes (PB@PDA@GQDs, PBPGs) with high photothermal conversion efficiency and excellent fluorescence performance for imaging-guided cancer treatment. Transmission electron microscopy (TEM), UV-vis absorption spectroscopy (UV-vis), fluorescence spectroscopy, and X-ray photoelectron spectroscopy (XPS) were employed to characterize their morphology and structures. The photothermal conversion efficiency and therapeutic effect were evaluated in vitro and in vivo. Results revealed that this nanoagent had excellent biocompatibility and enhanced the photothermal effect compared to blue nanocubes (PBs) and polydopamine-capped Prussian blue nanocubes (PB@PDA, PBPs). Therefore, our study may open a new path for the production of PB-based nanocomposites as theranostic nanoagents for imaging-guided photothermal cancer treatment.

Insights into a rutile/brookite homojunction of titanium dioxide: separated reactive sites and boosted photocatalytic activity

Benefiting from studies into Degussa TiO2, forming junctions via combining different phases of a semiconductor may provide new insights into the design of efficient photocatalysts, which are a key element in current solar-driven fuel production and environmental remediation. In this work, we aimed at creating a highly efficient rutile/brookite homojunction through precise crystal phase control. Characterization of the morphology and structure revealed that the ultrafine brookite phase TiO2 particles were uniformly attached to the surfaces of the rod-like rutile phase, not only readily forming a homojunction but also stabilizing the brookite phase. Surprisingly, the rutile/brookite-TiO2 homojunction exhibited a synergetic effect, improving the photocatalytic activity for both hydrogen generation and organic dye degradation. This was attributed to the well-matched band alignment and separated reaction sites, effectively promoting the charge separation efficiency. These results highlight the potential for bifunctional photocatalyst design with separated reactive sites for simultaneous redox reactions.

Seed-mediated synthesis of Au@PtCu nanostars with rich twin defects as efficient and stable electrocatalysts for methanol oxidation reaction

Pt-based nanocrystals with a twinned structure are highly desirable to achieve high performances in both catalytic activity and durability for methanol oxidation reaction (MOR). However, it still remains great challenge for producing such twinned nanocrystals due to the high internal strain energy of Pt. Here we present a seed-mediated approach to generate Au@PtCu nanostars with a five-fold twinned structure using Au decahedra as seeds. The composition of Pt/Cu in the nanocrystals was tuned by varying the molar ratio of Pt to Cu salt precursors with the amount of Au seeds being the same. Through composition optimization, Au@Pt1.2Cu nanostars achieved the highest specific (1.06 mA cm-2) and mass (0.18 mA mgPt -1) activities for MOR, which were about 5.9 and 1.6 times higher than those of commercial Pt/C, respectively. After accelerated stability test (ADT) for 1500 cycles, such nanostars remained ∼95% of specific activity compared to a loss of ∼28% for commercial Pt/C, indicting their superior durability for MOR. We believed that this enhancement may arise from the unique twinned structure and possible synergetic effect between Pt and Cu components.

Crosstalk among N6-methyladenosine modification and RNAs in central nervous system injuries

Central nervous system (CNS) injuries, including traumatic brain injury (TBI), intracerebral hemorrhage (ICH) and ischemic stroke, are the most common cause of death and disability around the world. As the most common modification on ribonucleic acids (RNAs), N6-methyladenosine (m6A) modification has recently attracted great attentions due to its functions in determining the fate of RNAs through changes in splicing, translation, degradation and stability. A large number of studies have suggested that m6A modification played an important role in brain development and involved in many neurological disorders, particularly in CNS injuries. It has been proposed that m6A modification could improve neurological impairment, inhibit apoptosis, suppress inflammation, reduce pyroptosis and attenuate ferroptosis in CNS injuries via different molecules including phosphatase and tensin homolog (PTEN), NLR family pyrin domain containing 3 (NLRP3), B-cell lymphoma 2 (Bcl-2), glutathione peroxidase 4 (GPX4), and long non-coding RNA (lncRNA). Therefore, m6A modification showed great promise as potential targets in CNS injuries. In this article, we present a review highlighting the role of m6A modification in CNS injuries. Hence, on the basis of these properties and effects, m6A modification may be developed as therapeutic agents for CNS injury patients.

Glycyrrhiza uralensis promote the metabolism of toxic components of Aconitum carmichaeli by CYP3A and alleviate the development of chronic heart failure

Aconitum, as "the first drug of choice for invigorating Yang and saving lives", has been widely used for the treatment of heart failure. However, toxic components of Aconitum can easily lead to serious arrhythmia, even death (Y. CT., 2009; Zhang XM., 2018). In this study, a High Performance Liquid Chromatography (HPLC) method for the determination of aconitine (AC), mesaconitine (MA) and hypaconitine (HA) was established; The effect of Glycyrrhiza on CYP3A1 / 2 mRNA expression was detected by RT-PCR; SD rats were given Aconitum and compatibility of Glycyrrhizae and Aconitum by gavage respectively, the blood concentration of toxic components were determined by LC-MS / MS; The CHF rat model was established by intraperitoneal injection of adriamycin (2.5 mg / kg), and were randomly divided into model, Aconitum, the compatibility of Glycyrrhizae and Aconitum and Captopril group, 5 mice/group. After 4 weeks of gavage, the corresponding indexes were detected by ELISA and HPLC. The results showed that Ketoconazole significantly inhibited the metabolites of AC, MA and HA; Glycyrrhiza induced CYP3A gene expression; The level of ALD in the compatibility of Glycyrrhizae and Aconitum group was significantly lower than that in Aconitum group. After intervention with the compatibility of Glycyrrhizae and Aconitum, ATP increased, ADP decreased significantly. In conclusion, we found Glycyrrhiza promoted the metabolism of toxic components of Aconitum by up regulating the expression of CYP3A, and reduced the content of BNP, Ang II and ALD, improved the energy metabolism disorder of myocardium, alleviated the development of CHF.

Neutrophil: lymphocyte ratio is positively associated with subclinical diabetic cardiomyopathy

BACKGROUND

Subclinical diabetic cardiomyopathy (DCM) occurs frequently in asymptomatic subjects with Type 2 diabetes mellitus (T2DM). The direct association between the immune system and DCM with effective biomarkers has been demonstrated in previous studies.

METHODS

Five hundred seven subjects with T2DM were recruited from April 2018 to October 2019 and divided into T2DM with cardiac dysfunction (DCM) group and T2DM without cardiac dysfunction (non-DCM) group. The relationship between the quartiles of Neutrophil: lymphocyte ratio (NLR) and subclinical DCM was evaluated by using adjusted logistic regression models.(covariates: age, sex, BMI, duration of diabetes, and hyperlipidemia).

RESULTS

Blood NLR was significantly upregulated in DCM group compared to non-DCM group (P = 0.05). Then the adjusted odds ratio (95% CI) of the highest NLR quartile was 14.32 (2.92-70.31) compared with the lowest quartile of NLR after multiple adjusted (P < 0.001). However, there was no significant relation between neutrophil and lymphocyte counts and the occurrence of DCM in T2DM patients.

CONCLUSIONS

This study demonstrated that NLR was associated with the occurrence of subclinical DCM, suggesting that NLR may be a biomarker for predicting DCM with effectiveness and accuracy.

TRIAL REGISTRATION

Chinese Clinical Trial Registry (ChiCTR1900027080) . Registered 30 October 2019. Retrospectively registered: www.medresman.org.

A Fiber Bragg Grating Sensing Structure for the Design, Simulation and Stress Strain Monitoring of Human Puncture Surgery

In order to improve the precision and stability of puncture surgical operations to assist doctors in completing fine manipulation, a new of type puncturing needle sensor is proposed based on a fiber Bragg grating (FBG). Compared with the traditional puncture needle sensor, the new type of puncturing needle sensor is able to sense not only the axial force, but also the torque force during the puncture process. A spoke-type structure is designed near the needle tip. In order to eliminate the influence of temperature and realize temperature compensation, a reference fiber method using three FBGs is applied. FBG1 and the reference FBG2 are pasted on the upper and lower surfaces of the new-type elastic beam, and FBG3 is pasted into the groove on the surface of the new type of puncturing needle cylinder. The difference of Bragg wavelength between FBG1 and the reference FBG2 is calibrated with the torque force, while the difference between the Bragg wavelength of the FBG3 and the reference FBG2 is calibrated with the axial force. Through simulation and sensing tests, when the torque force calibration range is 10 mN·m, the torque average sensitivity is 22.8 pm/mN·m, and the determination coefficient R2 is 0.99992, with a hysteresis error YH and repetition error YR of 0.03%FS and 0.81%FS, respectively. When the axial force calibration rang is 5 N, the axial force average sensitivity is 0.089 nm/N, and the determination coefficient R2 is 0.9997, with hysteresis error YH and repetition error YR of 0.014%FS and 0.11%FS, respectively. The axial force resolution and torque resolution of the new type of puncturing needle sensor are 0.03 N and 0.8 mN·m, respectively. The experimental data and simulation analysis show that the proposed new type of puncturing needle sensor has good practicability and versatility.

Immunoglobulin superfamily 6 is a molecule involved in the anti-tumor activity of macrophages in lung adenocarcinoma

BACKGROUND

Immunoglobulin superfamily 6 (IGSF6) is a novel member of the immunoglobulin superfamily and has been implicated in various diseases. However, the specific role of IGSF6 in the anti-tumor immunity within lung adenocarcinoma (LUAD) remains unclear.

METHODS

We analyzed the IGSF6 expression in LUAD using data from TCGA, and we performed qRT-PCR and western blotting to validate these findings using tissue samples obtained from LUAD patients. Images of IHC staining were obtained from HPA. To assess the clinical relevance of IGSF6 expression, we utilized UALCAN and SPSS to analyze its association with major clinical features of LUAD. Additionally, we employed ROC curves and survival analysis to evaluate the potential diagnostic and prognostic value of IGSF6 in LUAD. To gain insights into the functional implications of IGSF6, we performed enrichment analysis using the R software clusterProfiler package. Moreover, we utilized TIMER2.0 and TISIDB to investigate the relationship between IGSF6 and immune infiltrates in LUAD. The proportion of tumor-infiltrating immune cells in LUAD was assessed using FCM, and their correlation with IGSF6 expression in tumor tissues was analyzed. The localization of IGSF6 protein on macrophages was confirmed using the HPA and FCM. To determine the regulatory role of IGSF6 on macrophage activity in LUAD, we employed ELISA, FCM, and tumor-bearing models.

RESULTS

We discovered that both IGSF6 mRNA and protein levels were significantly decreased in LUAD. Additionally, we observed a negative correlation between IGSF6 expression and TNM stages as well as pathologic stages in LUAD. Notably, IGSF6 exhibited high sensitivity and specificity in diagnosing LUAD, and was positively associated with the survival rate of LUAD patients. Furthermore, IGSF6 expression was closely linked to gene sets involved in immune response. IGSF6 expression showed a positive correlation with immune infiltrates exhibiting anti-tumor activity, particularly M1 macrophages. We confirmed the predominant localization of the IGSF6 protein on the membrane of M1 macrophages. Importantly, the knockdown of IGSF6 resulted in a reduction in the anti-tumor activity of M1 macrophages, thereby promoting tumor progression.

CONCLUSION

IGSF6 is a molecule that is essential for the anti-tumor activity of macrophages in LUAD.

Enhanced Cadaverine Production by Engineered Escherichia coli Using Soybean Residue Hydrolysate (SRH) as a Sole Nitrogen Source

An economical source of nitrogen is one of the major limiting factors for sustainable cadaverine production. The utilization potential of soybean residue for enhanced cadaverine production by engineered Escherichia coli DFC1001 was investigated in this study. The SRH from soybean residue could get the protein extraction rate (PE) of 67.51% and the degree of protein hydrolysis (DH) of 22.49%. The protein molecular weights in SRH were mainly distributed in 565 Da (72.28%) and 1252 Da (17.11%). These proteins with small molecular weights and concentrated molecular weight distribution were favorable to be transformed by engineered E. coli DFC1001, and then SRH replaced completely yeast powder as an only nitrogen source for cadaverine production. The maximum cadaverine productivity was 0.52 g/L/h, achieved with a constant speed feeding strategy in the optimized SRH fermentation medium containing an initial total sugar concentration of 30 g/L and exogenous added minerals, which indicated that soybean residue could be a potential feedstock for economic cadaverine production.

Variation of Soil Microbial Community and Sterilization to Fusarium oxysporum f. sp. niveum Play Roles in Slightly Acidic Electrolyzed Water-Alleviated Watermelon Continuous Cropping Obstacle

It is critical to exploit technologies for alleviating watermelon continuous cropping obstacle which frequently occurs and results in the limiting production and economic losses of watermelon. This study aimed to explore the effects of slightly acidic electrolyzed water (SAEW) on watermelon continuous cropping obstacles. The results showed that SAEW significantly improved the growth of watermelon seedlings cultivated in continuous cropping soil and caused a mass of changes to the diversity of the soil microbial community. Compared with Con, SAEW decreased the diversity index of bacteria by 2%, 0.48%, and 3.16%, while it increased the diversity index of fungus by 5.68%, 10.78%, and 7.54% in Shannon, Chao1, and ACE index, respectively. Besides, the enrichment level of Fusarium oxysporum f. sp. niveum (FON) was remarkably downregulated by 50.2% at 14 days of SAEW treatment, which could decrease the incidence of Fusarium wilt disease. The wet and dry weights of FON mycelia in the fluid medium were depressed more than 93%, and the number of FON colonies in continuous cropping soil was reduced by 83.56% with SAEW treatment. Additionally, a strong correlation between watermelon, FON, and SAEW was presented by correlation analysis. Furthermore, the content of endogenous reactive oxygen species (ROS) was over quadruply increased by SAEW, which may contribute to the sterilizing effect of SAEW on FON. Taken together, our findings demonstrated that exogenous SAEW could alter the soil microbial diversity and decrease the accumulation of FON, which improved the growth of watermelon seedlings and finally alleviated continuous cropping obstacles of watermelon.

EIF4A3-Mediated Biogenesis of CircFADS1 Promotes the Progression of Hepatocellular Carcinoma via Wnt/β-Catenin Pathway

Mounting research indicates that circRNAs are pivotal elements in tumorigenesis and progression. Understanding the mechanisms by which circRNAs function in tumors is crucial for identifying undiscovered diagnostic and treatment targets. This research centers on unraveling the mechanisms by which the novel circRNA, circFADS1, influences hepatocellular carcinoma (HCC) progression. CircFADS1 shows elevated expression in HCC and is linked to unfavorable prognosis. Functionally, circFADS1 overexpression accelerates HCC progression through inducing HCC proliferation and inhibited apoptosis. Mechanistically, RNA-seq analysis demonstrates its connection to the Wnt/β-catenin pathway. Moreover, circFADS1 interacts with GSK3β and promotes its ubiquitination and degradation by recruiting the ubiquitin ligase RNF114 while EIF4A3 facilitates the biogenesis of circFADS1. Additionally, circFADS1 is closely linked to lenvatinib resistance. Overall, this study reveals that circFADS1 regulates GSK3β function, influencing the progression of hepatocellular carcinoma. The EIF4A3/circFADS1/GSK3β/β-catenin axis is discovered to hold promise as a novel therapeutic target for hepatocellular carcinoma, while circFADS1 is also a significant factor in lenvatinib resistance.

The significance of wrist immobilization for endoscopic carpal tunnel release

Background

Over the years, endoscopic carpal tunnel release (ECTR) has gained significant interest as an alternative to surgery. However, no consensus has been reached on the necessity of postoperative wrist immobilization. This study aims to compare the outcomes of wrist immobilization for a period of 2 weeks to immediate wrist mobilization after ECTR.

Methods

A total of 24 patients with idiopathic carpal tunnel syndrome undergoing dual-portal ECTR from May 2020 to Feb 2022 were enrolled and randomly divided into two groups postoperatively. In one group, patients wore a wrist splint for 2 weeks. In another group, wrist mobilization was allowed immediately after surgery. The two-point discrimination test (2PD test); the Semmes-Weinstein monofilament test (SWM test); the occurrence of pillar pain, digital and wrist range of motion (ROM); grip and pinch strength; the visual analog score (VAS), the Boston Carpal Tunnel Questionnaire (BCTQ) score; the Disabilities of the Arm, Shoulder, and Hand (DASH) score; and complications were evaluated at 2 weeks and 1, 2, 3, and 6 months after the surgery.

Results

All 24 subjects finished this study with no dropouts. During the early follow-up, patients with wrist immobilization demonstrated lower VAS scores, lower occurrence of pillar pain, and higher grip and pinch strength compared with the immediate mobilization group. No significant difference was obtained between these two groups in terms of the 2PD test, the SWM test, digital and wrist ROM, BCTQ, and the DASH score. In total, two patients without splints reported transient scar discomfort. No one complained of neurapraxia, injury of the flexor tendon, median nerve, and major artery. At the final follow-up, no significant difference was found in any parameters between both groups. The local scar discomfort mentioned above disappeared and left no serious sequela.

Conclusion

Wrist immobilization during the early postoperative period demonstrated significant pain alleviation along with stronger grip and pinch strength. However, wrist immobilization yielded no obvious superiority regarding clinical outcomes at the final follow-up.

Catalytic ozonation of dimethyl phthalate by Ti-MCM-41 in water

A Ti-MCM-41 mesoporous molecular sieve catalyst was prepared by a hydrothermal method. Nitrogen adsorption desorption, XRD, TEM and SEM characterization results showed that the catalyst had a large specific surface area, a regular hexagonal pore structure, and titanium doping was uniformly dispersed in MCM-41 molecular sieves. The amount of titanium doping, reaction temperature, and the initial solution pH had important effects on the catalytic ozonation of dimethyl phthalate (DMP) by Ti-MCM-41. In comparison to ozonation alone and MCM-41/O3, Ti-MCM-41/O3 exhibited the most effective degradation and mineralization of DMP, with a Si/Ti ratio of 80, a reaction temperature of 25 °C, and an initial solution pH of 5.4. Ozonation alone, MCM-41/O3, and Ti-MCM-41/O3 removed 94%, 96%, and 100% of DMP after 15 min of reaction. At 60 min of reaction, the TOC removal rate of the Ti-MCM-41/O3 process reached 36%, which was 2.4 times that of the O3 process and 1.9 times that of the MCM-41/O3 process. The experimental results of initial solution pH and hydroxyl radical capture showed that Ti-MCM-41 had the highest catalytic activity near the zero-charge point, and hydroxyl radicals were active oxygen species. Ti-MCM-41 catalytic ozonation of DMP had synergistic effects and is a promising environmental catalytic material.

Thermo-Mechanical Analysis for Composite Cylindrical Shells with Temperature-Dependent Material Properties Under Combined Thermal and Mechanical Loading

Composite laminated structures, comprising various engineering materials, are extensively utilized in engineering structures due to their superior design flexibility and enhanced mechanical performance. This study investigates the mechanical behavior of laminated cylindrical shells under combined thermal and mechanical loads. Using the theory of thermoelasticity, exact solutions are derived for temperature, displacement, and stress distributions in axisymmetric cylindrical shells with arbitrary numbers of layers and varying thicknesses, considering the temperature-dependent properties of the component materials. An iterative method and a slice model are introduced to address the interplay between temperature variations and material properties with the transfer matrix method on the basis of Fourier's law of heat conduction. Stresses and displacements are used to formulate the state-space equation. Continuity conditions at the interfaces are applied to recursively establish the relationships between internal and external surfaces by the state-space method. Unique solutions for temperature, displacement, and stress, which are dependent on temperature, are determined by the surface conditions. The high accuracy and effectiveness of the proposed method are validated through convergence and comparative studies. Notably, neglecting temperature dependence leads to significant differences, with temperature increasing by 11.28%, displacement by 17.35%, and stress by 33.74%. Furthermore, the effects of surface temperature, thickness-to-radius ratio, layer numbers, and component materials on the temperature, displacement, and stress distributions within laminated cylindrical shells are thoroughly explored.

The association between modified cardiometabolic index with non-alcoholic fatty liver disease and liver fibrosis: a cross-sectional study

BACKGROUND

Cardiometabolic index (CMI) was proposed ten years ago as an indicator combining obesity and dyslipidemia. This study aimed to investigate the relationships between newly modified CMI (MCMI) with non-alcoholic fatty liver disease (NAFLD) and liver fibrosis.

METHODS

This cross-sectional study included participants in the 2017-2018 National Health and Nutrition Examination Survey database (NHANES). Linear regression was used to explore the relationship between MCMI and Baseline characteristics. Logistic regression was conducted to analyze the correlation among MCMI with NAFLD and liver fibrosis. Furthermore, restricted cubic spline (RCS) was performed to estimate nonlinear relationships. Receiver operating characteristic curve (ROC) was used to assess the diagnostic performance of MCMI for NAFLD and liver fibrosis.

RESULTS

A total of 1385 participants were enrolled in the study. After adjusting covariates, participants with high MCMI were related to increased risk of NAFLD (OR = 3.52, 95%CI: 1.44-8.61), compared with those having low MCMI. A linear association was observed between MCMI and NAFLD (p for nonlinear = 0.074), and a J-shaped nonlinear relationship was found between MCMI and liver fibrosis (p for nonlinear = 0.002). The area under the curve (AUC) for MCMI to identify NAFLD was 0.821 (95% CI 0.799-0.843), which was higher than that of CMI (AUC = 0.761, 95%CI: 0.735-0.786), fatty liver index for the U.S. population (USFLI, AUC = 0.799, 95%CI: 0.776-0.822), Triglyceride glucose index (TyG, AUC = 0.738, 95%CI: 0.712-0.765), NAFLD liver fat score (NLFS, AUC = 0.786, 95%CI: 0.761-0.810) and hepatic steatosis index (HSI, AUC = 0.799, 95%CI: 0.775-0.822).

CONCLUSIONS

The novel MCMI was positively corelated to the risk of NAFLD. In addition, MCMI was an effective predictor for both NAFLD and liver fibrosis.

Association of formaldehyde concentration with depression risk in US adults: a population-based epidemiology study

The association of formaldehyde exposure with depression remains unknown. We used the data from National Health and Nutrition Examination Survey (NHANES) 2015-2016 to evaluate the association between formaldehyde exposure and depression. Multivariable logistic regressions and restricted cubic spline (RCS) were implemented to examine the association between formaldehyde exposure and depression. A total of 1336 participants were included in the analysis, of which 110 (8.23%) participants were depressed. After adjusting for confounders, a significant association between formaldehyde exposure and depression (OR = 1.01, 95% CI: 1.00-1.02, P = 0.043) was observed. The RCS plot showed a positive association in a linear manner (PNonlinear = 0.109), and the risk began to rise rapidly with concentrations above 129.37 nmol/g HB. The positive association remained in participants with high-intensity physical activity (OR = 1.08, 95% CI: 1.02-1.13, P = 0.003), but not in participants with other physical activities. Moreover, we constructed a novel nomogram to easily estimate the individual-specific probabilities of depression. In conclusion, formaldehyde exposure was associated with an elevated risk of depression, and the effect exhibited differences in participants with different levels of physical activity.

The Extra-Tumoral Vaccine Effects of Apoptotic Bodies in the Advancement of Cancer Treatment

The induction of apoptosis in tumor cells is a common target for the development of anti-tumor therapies; however, these therapies still leave patients at increased risk of disease recurrence. For example, apoptotic tumor cells can promote tumor growth and immune evasion via the secretion of metabolites, apoptotic extracellular vesicles, and induction of pro-tumorigenic macrophages. This paradox of apoptosis induction and the pro-tumorigenic effects of tumor cell apoptosis has begged the question of whether apoptosis is a suitable cancer therapy, and led to further explorations into other immunogenic cell death-based approaches. However, these strategies still face multiple challenges, the most critical of which is the tumor microenvironment. Contrary to the promotion of immune tolerance mediated by apoptotic tumor cells, apoptotic bodies with enriched tumor-related antigens have demonstrated great immunogenic potential, as evidenced by their ability to initiate systemic T-cell immune responses. These characteristics indicate that apoptotic body-based therapies could be ideal "in situ" extra-tumoral tumor vaccine candidates for the treatment of cancers, and further address the current issues with apoptosis-based or immunotherapy treatments. Although not yet tested clinically, apoptotic body-based vaccines have the potential to better treatment strategies and patient outcomes in the future.

EDA ligand triggers plasma membrane trafficking of its receptor EDAR via PKA activation and SNAP23-containing complexes

BACKGROUND

Ectodysplasin-A (EDA), a skin-specific TNF ligand, interacts with its membrane receptor EDAR to trigger EDA signaling in skin appendage formation. Gene mutations in EDA signaling cause Anhidrotic/Hypohidrotic Ectodermal Dysplasia (A/HED), which affects the formation of skin appendages including hair, teeth, and several exocrine glands.

RESULTS

We report that EDA triggers the translocation of its receptor EDAR from a cytosolic compartment into the plasma membrane. We use protein affinity purification to show that upon EDA stimulation EDAR associates with SNAP23-STX6-VAMP1/2/3 vesicle trafficking complexes. We find that EDA-dependent PKA activation is critical for the association. Notably, either of two HED-linked EDAR mutations, T346M and R420W, prevents EDA-induced EDAR translocation; and both EDA-induced PKA activation and SNAP23 are required for Meibomian gland (MG) growth in a skin appendage model.

CONCLUSIONS

Overall, in a novel regulatory mechanism, EDA increases plasma membrane translocation of its own receptor EDAR, augmenting EDA-EDAR signaling in skin appendage formation. Our findings also provide PKA and SNAP23 as potential targets for the intervention of HED.

Construction of a cutoff and fusion model of breast cancer patients in family: a grounded theory study

PURPOSE

To construct a coping model for interactions between breast cancer patients and their families across the disease trajectory using the patients' voice, and to establish a mechanism for restoring family balance when faced with stresses related to breast cancer.

METHODS

This study employed a longitudinal qualitative study design using constructivist grounded theory. We divided breast cancer trajectory into four periods: suspicion, diagnosis, treatment, and rehabilitation. We then interviewed patients during each of these periods.

RESULTS

Twenty patients with breast cancer were interviewed. A cutoff and fusion model of the breast cancer patient's interactions with her family contained three coping themes: independence, coexistence, and interconversion. The coping trajectory of breast cancer patients in their families has specific themes in each period, such as anxiety, information, emotion, and experience.

CONCLUSION

We constructed a cutoff and fusion model of breast cancer patients' coping trajectory in their families. This model not only explains the opposite, coexistent, and interconvertible relationship between cutoff and fusion but also the specific challenges requiring cutoff and fusion during the four periods. Our findings highlight the dynamic balance of cutoff and fusion for patients' coping in their families.

IMPLICATIONS FOR PRACTICE

This model helps clinical staff understand the coping of breast cancer patients in their families. When providing family education, clinical staff should suggest that they not only provide support to the patient but give each other space as well.

High-Performance Methylsilsesquioxane Aerogels: Hydrolysis Mechanisms and Maximizing Compression Properties

Synthesis of methylsilsesquioxane aerogels by ambient pressure drying instead of supercritical drying has recently emerged as a major trend, but the issues of low mechanical strength and unstable performance still need to be resolved. This work reveals the microscopic formation mechanisms of gel skeleton based on the kinetic characteristics of methyltrimethoxysilane (MTMS) precursor hydrolysis and the associated sol-gel reactions. The effects of oxalic acid concentration (cOA) and hydrolysis time of MTMS solution (th) on the gelation time, morphologies, microstructures, chemical structure, and compression properties of the as-synthesized methylsilsesquioxane aerogels are investigated. The optimal cOA and th are 38.4 mmol/L and 120 min, respectively, endowing the methylsilsesquioxane aerogels with a compression strength of 0.170 MPa and a maximum compression strain of 61.2%. Precise control of the hydrolysis conditions ensures the formation of branched particle-to-particle networks, which is crucial for maximizing the compression properties of methylsilsesquioxane aerogels synthesized under industry-relevant conditions.

[Quantitative analysis of risk assessment indicators for re-introduction of imported malaria in China]

OBJECTIVE

To quantitatively analyze the risk indicators of re-introduction of imported malaria in China and their weighting coefficients, so as to investigate the difference in the contribution of risk indicators included in the current risk assessment framework for re-introduction of imported malaria in China to the risk assessment of re-introduction of imported malaria.

METHODS

Publications pertaining to the risk assessment framework for re-introduction of imported malaria in China that reported the risk indicators and their weighting coefficients were retrieved in PubMed, Web of Science, CNKI, Wanfang Data, and VIP with terms of "malaria", "re-introduction/re-transmission/re-establishment", "risk assessment/risk evaluation/risk prediction" from the inception of the database through 3 August 2023, and literature search was performed in Google Scholar to ensure the comprehensiveness of the retrieval. Basic characteristics of included studies were extracted using pre-designed information extraction forms by two investigators, and data pertaining to risk indicators of re-introduction of imported malaria were cross-checked by these two investigators. The risk indicators included in the risk assessment framework for re-introduction of imported malaria in China and their weighting coefficients were visualized with the Nightingale's rose diagrams using the software R 4.2.1, and the importance of risk indictors was evaluated with the frequency of risk indicators included in the risk assessment framework and the ranking of weighting coefficients of risk indicators. In addition, the capability of risk indicators screened by different weighting methods was compared by calculating the ratio of the maximum to the minimum of the weighting coefficients of the risk indicators screened by different weighting methods.

RESULTS

A total of 2 138 publications were retrieved, and following removal of duplications and screening, a total of 8 publications were included in the final analysis. In these 8 studies, 8 risk assessment frameworks for re-introduction of imported malaria in China and 52 risk indicators of re-introduction of imported malaria were reported, in which number of imported malaria cases (n = 8) and species of malaria vectors were more frequently included in the risk assessment frameworks (n = 8), followed by species of imported malaria parasites (n = 6) and population density of local malaria vectors (n = 6), and species of local malaria vectors (n = 6), number of imported malaria cases (n = 5) and species of imported malaria parasites had the three highest weighting coefficients (n = 4). The weighting methods included expert scoring method, combination of expert scoring method and analytic hierarchy process, and combination of expert scoring method and entropy weight method in these 8 studies, and the ratios of the maximum to the minimum of the weighting coefficients of the risk indicators screened by the expert scoring method were 1.143 to 2.241, while the ratios of the maximum to the minimum of the weighting coefficients of the risk indicators screened by combination of the expert scoring method and analytic hierarchy process were 34.970 to 162.000.

CONCLUSIONS

Number of imported malaria cases, species of imported malaria parasites, species of local malaria vectors and population density of local malaria vectors are core indicators in the current risk assessment framework for re-introduction of imported malaria in China. Combination of the expert scoring method and analytic hierarchy process is superior to the expert scoring method alone for weighting the risk indicators.

Feasibility of FDCT Early Brain Parenchymal Blood Volume Maps in Predicting Short-Term Prognosis in Patients With Aneurysmal Subarachnoid Hemorrhage

Purpose

Aneurysmal subarachnoid hemorrhage (SAH) is accompanied by cerebral perfusion changes. We aimed to measure the parenchymal blood volume (PBV) maps acquired by C-arm flat-panel detector CT (FDCT) to assess the cerebral blood volume at an early stage in aneurysmal SAH and to explore the correlation with the outcomes at discharge.

Methods

Data of 66 patients with aneurysmal SAH who underwent FDCT PBV examination were retrospectively analyzed. The PBV of regions of interest, including the cortices of the bilateral frontal lobe, the parietal lobe, the occipital lobe, and the cerebral hemisphere, as well as the basal ganglia, were measured and quantitatively analyzed. The clinical and imaging data of the patients were also collected, and logistic regression analysis was performed to explore the correlation between the perfusion parameters and outcomes at discharge.

Results

The favorable and poor outcomes at discharge were found in 37 (56.06%) and 29 (43.94%) patients, respectively. The whole-brain PBV was significantly correlated with the Hunt-Hess grades (p < 0.005) and the WFNSS grades (p < 0.005). The whole-brain PBV of the poor prognosis was significantly higher than that of the favorable prognosis (35.17 ± 7.66 vs. 29.78 ± 5.54, p < 0.005). The logistic regression analysis showed that the PBV of the parietal lobe at the bleeding side (OR = 1.10, 95%CI: 1.00-1.20, p = 0.04) was an independent risk factor predicting the short-term prognosis.

Conclusions

Parenchymal blood volume (PBV) maps could reflect the cerebral blood volume throughout the brain to characterize its perfusion status at an early stage in aneurysmal SAH. It enables a one-stop imaging evaluation and treatment in the same angio-suite and may serve as a reliable technique in clinical assessment of aneurysmal SAH.

Screening of exopolysaccharide-producing Enterobacter aerogenes NJ1023 and its cadaverine biosynthesis promotion

Enterobacter aerogenes, the gram-negative bacteria belonging to the family Enterobacteriaceae, lacks the ability to synthesize chemicals. However, in this study, a strain of Enterobacter aerogenes NJ1023 screened from the soil containing petrochemicals was found to be capable of producing extracellular polysaccharides (EPSs). After purification of the polysaccharide, the chemical composition and physicochemical properties of the polysaccharide were analyzed by UV-Vis spectra, FTIR spectroscopy and GC-MS, etc. The results showed that: The molecular weight of the polysaccharide produced by this strain was only 2.7×103 Da, which was lower than that reported in other polysaccharides from the same genus. The polysaccharide produced by E. aerogenes NJ1023 mainly comprised xylose, glucose, galactose, and N-acetylglucosamine with a molar ratio of 0.27: 4.52: 1.74: 0.2, which differed from those reported from the same genus. The results demonstrated that lower incubation temperatures and shaking speeds were more favorable for EPSs synthesis, while higher incubation temperatures and shaking speeds favored cell growth. Additionally, the EPSs produced by E. aerogenes NJ1023 significantly protected the Escherichia coli cells against cadaverine stress. Overall, the discovery of EPSs produced by E. aerogenes increased the diversity of bacterial polysaccharides and broadened the potential applications of this species.