Insights into oxidation of pentachlorophenol (PCP) by low-dose ferrate(VI) catalyzed with α-Fe2O3 nanoparticles

In this study, the catalytic performance of α-Fe₂O₃ nanoparticles (nα-Fe₂O₃) in the low-dose ferrate (Fe(VI)) system was systematically studied through the degradation of pentachlorophenol (PCP). Based on the established quadratic functions between nα-Fe₂O₃ amount and observed pseudo first-order rate constant (k_obs), two linear correlation equations were offered to predict the optimum catalyst dosage and the maximum k_obs at an applied Fe(VI) amount. Moreover, characterization and cycling experiments showed that nα-Fe₂O₃ has good stability and recyclability. According to the results of reactive species identification and quenching experiment and galvanic oxidation process, the catalytic mechanism was proposed that Fe(III) on the surface of nα-Fe₂O₃ may react with Fe(VI) to enhance the generation of highly reactive Fe(IV)/Fe(V) species, which rapidly extracted a single electron from PCP molecule for its further reaction. Besides, two possible PCP degradation pathways, i.e., single oxygen transfer mediated hydroxylation and single electron transfer initiated polymerization were proposed. The formation of coupling products that are prone to precipition and separation was largely improved. This study proved that nα-Fe₂O₃ can effectively catalyze PCP removal at low-dose Fe(VI), which provides some support for the application of Fe(VI) oxidation technology in water treatment in the context of low-carbon emissions.

Repurposing of steel rolling sludge: Solvent-free preparation of α-Fe2O3 nanoparticles and its application for As(III/V)-containing wastewater treatment

Steel rolling sludge (SRS) is the by-product of metallurgical industry with abundant iron content, which needs to be utilized for producing high value-added products. Herein, cost-effective and highly adsorbent α-Fe₂O₃ nanoparticles were prepared from SRS via a novel solvent-free method and applied to treat As(III/V)-containing wastewater. The structure of the prepared nanoparticles was observed to be spherical with a small crystal size (12.58 nm) and high specific surface area (145.03 m²/g). The nucleation mechanism of α-Fe₂O₃ nanoparticles and the effect of crystal water were investigated. More importantly, compared with the traditional methods of preparation cost and yield, this study was found to have excellent economic benefits. The adsorption results indicated that the adsorbent could effectively remove arsenic over a wide pH range, and the optimal performance of nano adsorbent for As(III) and As(V) removal was observed at pH 4.0-9.0 and 2.0-4.0, respectively. The adsorption process was consistent with pseudo-second-order kinetic and Langmuir isothermal model. The maximum adsorption capacity (q_m) of adsorbent for As(III) and As(V) was 75.67 mg/g and 56.07 mg/g, respectively. Furthermore, α-Fe₂O₃ nanoparticles exhibited great stability, and q_m remained at 64.43 mg/g and 42.39 mg/g after five cycles. Particularly, the As(III) was removed by forming inner-sphere complexes with the adsorbent, and it partially oxidized to As(V) during this process. In contrast, the As(V) was removed by electrostatic adsorption and reaction with -OH on the adsorbent surface. Overall, resource utilization of SRS and the treatment of As(III)/(V)-containing wastewater in this study are in line with the current developments in the environmental and waste-to-value research.

Optimizing treatment of alcohol vinasse using a combination of advanced oxidation with porous α-Fe2O3 nanoparticles and coagulation-flocculation

This study utilizes a novel method, namely the combination of advanced oxidation processes with synthesized highly porous α-Fe2O3 nanoparticles and coagulation-flocculation with polyacrylamide, to investigate the effects on COD removal in alcohol vinasse. Highly porous α-Fe2O3 nanoparticles were prepared via a chemical precipitation technique. The characteristic of the synthesized α-Fe2O3 nanoparticles were determined by FT-IR, Raman spectroscopy, XRD, SEM, and N2 adsorption-desorption isotherms. The effect of different α-Fe2O3 nanoparticles loading for chemical oxygen demand (COD) removal efficiency was investigated. The results revealed that at α-Fe2O3 nanoparticle dose of 3000 ppm had the highest COD removal for vinasse. Then, central composite design (CCD) was used to optimize the operating variables such as pH, time, oxidant dosage, and coagulant dosage, and their optimum values were determined to be pH:7.36, 90 min, 17.89 wt% oxidant dosage, and 1.6 wt% coagulant dosage, to achieve a high COD removal efficiency in 70 ℃ for alcohol vinasse (98.64%). Based on optimal conditions, the porous α-Fe2O3 nanoparticles possess superior catalytic activity in the advanced oxidation process compared to other treating methods. Also, the mechanism of the catalytic oxidation reaction is evaluated.

Bioavailability and effect of α-Fe2O3 nanoparticles on growth, fatty acid composition and morphological indices of Chlorella vulgaris

The wide application of α-Fe₂O₃ nanoparticles (NPs) in different fields has resulted in release and accumulation of these materials into the aquatic ecosystem. Therefore, it is important to understand the potential impact of these NPs on aquatic organisms especially primary producers i.e., microalgae. Present study aimed to investigate the bioavailability and the effect of α-Fe₂O₃ NPs on growth of iron deprived cells of Chlorella vulgaris. Results showed that α-Fe₂O₃ NPs are not available as iron source to support the growth of C. vulgaris. Moreover，α-Fe₂O₃ NPs induced stress condition to C. vulgaris, which were reflected in its growth rates, total lipid contents, fatty acid profile and cell morphology. Specifically, low concentrations of α-Fe₂O₃ NPs (0.1, 0.5, 2.5, 5, 10 mg/L) showed similar growth profile and total lipid contents at both exponential and stationary growth phases. At 50 and 100 mg/L α-Fe₂O₃ NPs concentrations biomass reduced by 41.2% and 83.7% whereas total lipid contents increased by 39.7% and 25.5% respectively at exponential growth phase along with reduction in fatty acids. The results illustrated novel insights into the microalgal interaction with nanoparticles, providing fundamental knowledge for the development of future microalgae ecology and cultivation technology.

Influence of nanoscale micro-nutrient α-Fe2O3 on seed germination, seedling growth, translocation, physiological effects and yield of rice (Oryza sativa) and maize (Zea mays)

In the present study, nanoscale micronutrient iron (α-Fe₂O₃) has been prepared via co-precipitation using marine macro alga Turbinaria ornata. The nanoscale micronutrient iron has been used as priming agent for enhancing seed germination, seed quality, uptake, translocation, physiological effects and yield level of rice and maize crops. The physico-chemical characterization techniques results showed the successful preparation of nanoscale micronutrient iron. Seeds primed with nanoscale micronutrient iron at 25 mg/L significantly enhanced the seed germination and seedling parameters in comparison with conventional hydro-priming. ROS production in germinating nano-primed seeds of rice and maize enhanced the seed germination better than the conventional hydro-priming. Uptake and distribution of nanoscale micronutrient iron in rice and maize seedlings were studied using HR-SEM & ICP-MS analysis. Foliar application of low concentration (10 mg/L) nanoscale micronutrient iron under field conditions significantly increased the chlorophyll content, yield attributes of rice and maize crops.