Cu(II)-Catalyzed Enantioselective Aza-Friedel-Crafts Reaction of 1-Naphthols and Electron-Rich Phenols with Isatin-Derived Ketimines

New chiral ligands could be obtained by introducing proline moieties and imidazoline moieties to binaphthyl skeletons. The chiral ligands exhibited balanced rigidity and flexibility which could allow the change of the conformations during the reactions on one hand, and could provide sufficient asymmetric induction on the other. The proline moiety could act as a linker connecting the binaphthyl skeletons and the imidazoline moieties as well as a coordinating group for the central metal, and the electronic and steric properties of the imidazoline groups could be carefully fine-tuned by the use of different substituents. In the presence of Cu(II) catalyst bearing such chiral ligands, aza-Friedel-Crafts reaction of 1-naphthols and electron-rich phenols with isatin-derived ketimines provided the desired products with good to excellent yields and up to 99 % ee. The reactions showed good scalability, and excellent ee could still be obtained when the reaction was carried out in gram-scale.

Comparative study on the removal of 1- naphthol and 2-naphthol by ferrate (VI): Kinetics, reaction mechanisms and theoretical calculations

In this study, the oxidation of 1-naphthol (1-NAP) and 2-T (2-NAP) by Fe(VI) was investigated. The impacts of operating factors were investigated through a series of kinetic experiments, including Fe(VI) dosages, pH and coexisting ions (Ca²⁺, Mg²⁺, Cu2⁺, Fe³⁺, Cl^-, SO₄^2-, NO₃^- and CO₃^2-). Almost 100% elimination of both 1-NAP and 2-NAP could be achieved within 300 s at pH 9.0 and 25 °C. Cu²⁺ could significantly improve the degradation efficiency of 1-NAP and 2-NAP, but the impacts of other ions were negligible. The liquid chromatography-mass spectrometry was used to identify the transformation products of 1-NAP and 2-NAP in Fe(VI) system, and the degradation pathways were proposed accordingly. Electron transfer mediated polymerization reaction was the dominant transformation pathway in the elimination of NAP by Fe(VI) oxidation. After 300 s of oxidation, heptamers and hexamers were found as the final coupling products during the removal of 1-NAP and 2-NAP, respectively. Theoretical calculations demonstrated that the hydrogen abstraction and electron transfer reaction would easily occur at the hydroxyl groups of 1-NAP and 2-NAP, producing NAP phenoxy radicals for subsequent coupling reaction. Moreover, since the electron transfer reactions between Fe(VI) and NAP molecules were barrierless and could occur spontaneously, the theoretical calculation results also confirmed the priority of coupling reaction in Fe(VI) system. This work indicated that the Fe(VI) oxidation was an effective way for removing naphthol, which may help us understand the reaction mechanism between phenolic compounds with Fe(VI).

Folin-Ciocalteu assay as a rapid colourimetric screening method for evaluating PAH degradation abilities of heterotrophic bacteria

Bioremediation using microbes is an eco-friendly approach being explored for reclaiming PAH-contaminated areas. However, isolation and screening of potential bacteria to degrade PAHs are very laborious and cumbersome. To alleviate this issue, we describe a rapid method for screening the bacterial cultures for their ability to degrade PAHs using Folin-Ciocalteu (FC) assay. Six hundred bacterial isolates were tested for their ability to degrade PAH using FC assay. The cultures capable of degrading PAH show blue colouration, resulting from the reaction of FC reagent with phenolic intermediates generated during PAH degradation. Out of the 600 cultures screened, 64 showed an ability to degrade PAH. This study provides a very easy, rapid, less laborious, and sensitive method to screen a large number of bacterial cultures for their ability to degrade PAH.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-023-03549-4.

Efficient biodegradation of phenanthrene using Pseudomonas stutzeri LSH-PAH1 with the addition of sophorolipids: Alleviation of biotoxicity and cometabolism studies

Phenanthrene (PHE) is widely distributed, and it can cause genotoxicity in humans by interacting with enzymes in the body. A current challenge for PHE bioremediation is the inhibitory effect of biotoxic intermediates on bacterial growth. Notably, the aerobic biotransformation processes for PHE in the presence of sophorolipids have been poorly studied. Here, a PHE-degrading strain was isolated from sediments and identified as Pseudomonas stutzeri and named LSH-PAH1. It was observed that 1-naphthol (a biotoxic substance that can inhibit strain growth) was produced during the PHE metabolism process of LSH-PAH1. The biodegradation ratio increased from 21.4% to 91.7% within 48 h after the addition of sophorolipids. Unexpectedly, this addition accelerated the metabolic process for 1-naphthol rather than causing its accumulation. The cometabolism of 1-naphthol and sophorolipids alleviated the biotoxic effects for the strain, which was verified by gene expression analysis. We identified a new PHE-degrading strain and provided a mechanism for PHE biodegradation using LSH-PAH1 with the addition of sophorolipids, which provides a reference for practical applications of the bioremediation of PHE and study of the cometabolism of biotoxic intermediates.

Synthesis of reusable cyclodextrin polymers for removal of naphthol and naphthylamine from water

As one group of important naphthalene derivatives, naphthol and naphthylamine are diffusely employed as dye intermediates. The presence of naphthol and naphthylamine in water systems may pose risks to the environment and public health due to their carcinogenicity. In this study, four mesoporous polymers prepared by β-cyclodextrin derivatives and tetrafluoroterephthalonitrile were obtained and applied to adsorbing 1-naphthylamine, 2-naphthylamine, 1-naphthol, and 2-naphthol from water. The impact of adsorption time, initial concentration of naphthol and naphthylamine, and temperature on the adsorption efficiency of the four polymers were explored separately. The four polymers present fast adsorption kinetics toward naphthol and naphthylamine, attaining 93 ~ 100% of adsorption equilibrium uptake for 1-naphthol, 1-naphthylamine, 2-naphthylamine in 15 min, and 87 ~ 90% of equilibrium uptake for 2-naphthol in 15 min. The kinetics could be depicted well by the pseudo-second-order kinetic model. The adsorption isotherms of the four polymers toward naphthol and naphthylamine accord with the Redlich-Peterson or Sips model. The maximum adsorption capacities of 1-naphthylamine, 2-naphthylamine, 1-naphthol, and 2-naphthol are 189.9 mg/g, 82.8 mg/g, 137.7 mg/g, and 88.7 mg/g, respectively. The adsorption ratio increases fast with reducing the initial concentration of naphthol and naphthylamine, and the adsorption ratio of naphthol and naphthylamine in 5 mg/L can achieve over 95% in 25 °C. In addition, the four polymers can be effortlessly regenerated by a gentle and simple washing procedure with little reduction in performance. The adsorption performance of the four polymers toward the four naphthalene derivatives can be improved by increasing the adsorption temperature. In conclusion, the prepared β-cyclodextrin polymers exhibit rapid water treatment in removing the four low-concentration naphthalene derivatives with convenient regeneration and good reusability.

Phosphate-triggered ratiometric fluoroimmunoassay based on nanobody-alkaline phosphatase fusion for sensitive detection of 1-naphthol for the exposure assessment of pesticide carbaryl

The excessive use of carbaryl has resulted in the risk of its exposure. In this study, we isolated six nanobodies (Nbs) from a camelid phage display library against the biomarker of carbaryl, 1-naphthol (1-NAP). Owing to its characteristics of easy genetic modifications, we produced a nanobody-alkaline phosphatase (Nb-CC4-ALP) fusion protein with good stability. A dual-emission system based ratiometric fluoroimmunoassay (RFIA) for quick and highly sensitive determination of 1-NAP was developed. Silicon nanoparticles (SiNPs) was used as an internal reference and for aggregation-induced emission enhancement (AIEE) of gold nanoclusters (AuNCs), while AuNCs could be quenched by MnO₂ via oxidation. In the presence of ALP, ascorbic acid phosphate (AAP) can be transformed into ascorbic acid (AA), the later can etch MnO₂ to recover the fluorescence of the AuNCs. Based on optimal conditions, the proposed assay showed 220-fold sensitivity improvement in comparison with conventional monoclonal antibody-based ELISA. The recovery test of urine samples and the validation by standard HPLC-FLD demonstrated the proposed assay was an ideal tool for screening 1-NAP and provided technical support for the monitoring of carbaryl exposure.

N-doped mesoporous carbon as a new sorbent for ultrasonic-assisted dispersive micro-solid-phase extraction of 1-naphthol and 2-naphthol, the biomarkers of exposure to naphthalene, from urine samples

This study aimed to optimize a new sample preparation method using N-doped mesoporous carbon sorbent for simultaneous measurement of 1-naphthol and 2-naphthol, the biomarkers of exposure to naphthalene. The samples were analyzed using high-performance liquid chromatography supplied with ultraviolet detector (HPLC-UV). N-doped mesoporous carbon sorbent was obtained via the hard template procedure. The synthesized nanosorbent was then characterized by transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), and elemental analysis (CHN). The effective factors in the extraction of the studied biomarkers were examined by the Box-Behnken (BBD) methodology. Regarding the optimum conditions, the sketched calibration curve for naphthols was linear in the concentration levels of 1-600 µg L^-1 for human urine samples. The accuracy and reproducibility of the introduced method were determined using the relative recovery (RR %) and relative standard deviation (RSD %) tests on the fortified urine samples. RR% and RSD% were found to be 97.0-101.2% and 3.1-9.0%, respectively. The calculated method detection limit of the optimized procedure was 0.3 µg L^-1 and 0.5 µg L^-1 for 1-naphthol and 2-naphthol, respectively.

Iron nanoparticles encapsulated within nitrogen and sulfur co-doped magnetic porous carbon as an efficient peroxymonosulfate activator to degrade 1-naphthol

A novel iron nanoparticles encapsulated within nitrogen and sulfur co-doped magnetic porous carbon (Fe-N-S-MPC) was proposed by one-pot pyrolysis strategy to activate peroxymonosulfate (PMS) to degrade 1-naphthol using low-cost lignin as precursors. The Fe-N-S-MPC was characterized for structure and properties by different characterizations. The obtained materials had the morphology of iron nanoparticles encapsulated within nitrogen and sulfur co-doped magnetic porous carbon with rich functional groups and large specific surface area, which made the materials have a good catalytic property. It was proved that the doping of nitrogen and sulfur is pivotal for improving the catalytic performance. The radical quenching experiment confirmed that sulfate radical (SO₄^-) and hydroxyl radical (OH) are two major reactive oxygen groups. The reaction had phenomenon of the free radicals upsurge in the early stage and the shortage in the later stage. Therefore, a mathematical model was put forward to represent the two-stage reaction kinetics. By adding oxidants in batches, the degradation effect could reach nearly 100% within 30 min. The Fe-N-S-MPC were applied to the degradation of 1-naphthol in soil and showed high degradation performance. This work provided a new type of catalytic material by the high-value utilization of waste for the degradation of organic pollutants.

Low-molecular-weight organic acids impede the degradation of naphthol in iron oxides/persulfate systems: Implications for research experiments in pure conditions

Naphthols are industrial contaminants occurring widely in soils and waters. Remediation of organic pollutants can be done by chemical oxidation using persulfate. However, most research experiments testing degradation of organic pollutants have been done in ideal conditions, e.g. using a pure compound in pure water, and thus are weakly representative of real natural conditions where pollutants occur in complex mixtures of numerous organic compounds. Therefore we tested here the effect of the presence of small organic acids, as typical compounds occurring in natural media, on the degradation of 1-napthol with persulfate and iron oxides. Results show that organic acids decreased naphthol transformation by 3.7% for malic acid, 53.2% for tartaric acid, 72.3% for citric acid and 77% for oxalic acids, in a magnetite/persulfate system during 10 h. Meanwhile, the dissolved Fe species increased gradually with the reaction time; the highest concentration of Fe ions reached to ∼18 μM L^-1 in aqueous phase. Electron paramagnetic resonance technique was applied to determine reactive oxygen species (ROS). The spin density of ·OH, detected as the main ROS, decreased initially, followed by gradually increase, suggesting that organic acids might inhibit the degradation of 1-naphthol by competing with ·OH. These findings disclose the high inhibition of the transformation by organic acids, and thus, more generally, imply that studies using only pure contaminants are weakly representative for remediation of real, natural samples.