Examination of surface porosity of current pulp capping materials by micro-computed tomography (micro-CT) method

When dental pulp is exposed, it must be covered with a biocompatible material to form reparative dentine. The material used, besides being biocompatible, should have an ideal surface structure for the attachment, proliferation and differentiation of dental pulp stem cells. This study aimed to evaluate the porosity of the microstructures of four pulp capping materials using micro-computed tomography (micro-CT). Biodentine, Bioaggregate, TheraCal and Dycal materials were prepared according to the manufacturer's instructions using 2 × 9 mm Teflon molds. A total of 60 samples, 15 in each group, were scanned using micro-CT. Open and closed pores and the total porosity of the microstructures of the materials were assessed. The findings obtained from the study were analyzed via the Kruskal-Wallis test followed by the Mann-Whitney U test. The porosity of Bioaggregate was significantly higher than that of Biodentine, Dycal and TheraCal in all porosity values. While Biodentine did not show a statistically significant difference in open and total porosity values from either TheraCal or Dycal, closed porosity values of Dycal were significantly higher than those of Biodentine and TheraCal. Because of the affinity of cells to porous surfaces, the pulp capping materials' microstructure may affect the pulp capping treatment's success. From this perspective, the use of Bioaggregate in direct pulp capping may increase the success of treatment.

Physicochemical, mechanical and biological properties of nano-calcium silicate-based cements: a systematic review

This systematic review evaluated the effects of nano-sized cement particles on the properties of calcium silicate-based cements (CSCs). Using defined keywords, a literature search was conducted to identify studies that investigated properties of nano-calcium silicate-based cements (NCSCs). A total of 17 studies fulfilled the inclusion criteria. Results indicated that NCSC formulations have favourable physical (setting time, pH and solubility), mechanical (push out bond strength, compressive strength and indentation hardness) and biological (bone regeneration and foreign body reaction) properties compared with commonly used CSCs. However, the characterization and verification for the nano-particle size of NCSCs were deficient in some studies. Furthermore, the nanosizing was not limited to the cement particles and a number of additives were present. In conclusion, the evidence available for the properties of CSC particles in the nano-range is deficient-such properties could be a result of additives which may have enhanced the properties of the material.

Radiopacity evaluation of calcium silicate cements

BACKGROUND

The aim of this study was to compare the radiopacity of calcium silicate cements using a digital imaging method.

METHODS

Four calcium silicate cements, NeoMTA 2, OrthoMTA, ProRoot MTA, and Biodentine, were used in this study. Disk-shaped samples were prepared from each material and placed on a plexiglass plate. An aluminum step-wedge was placed alongside the samples on a digital sensor and exposed to 70 kVp and 8 mA from 30 cm away for 0.32 s. The greyness values ​​of the tested materials were measured digitally with the system software and compared with those of the step-wedge to determine the equivalent aluminum thickness.

RESULTS

The radiopacity values, expressed in equivalent millimetres of aluminum, of the studied materials ProRoot MTA, OrthoMTA, NeoMTA 2, and Biodentine were 4.32 ± 0.17 mm Al, 3.92 ± 0.09 mm Al, 3.83 ± 0.07 mm Al, and 2.29 ± 0.21 mm Al, respectively. Statistically significant differences were found between the mean radiographic density values of the tested materials (p < 0.05).

CONCLUSION

ProRoot MTA was the most radiopaque root canal filling material among the tested materials. All materials, except Biodentine, were found to be compliant with the minimum radiopacity requirements of ISO 6876 and ADA 57 standards.

Efficacy of Chitosan Scaffolded Calcium Silicate-based Cements for Treating Internal Resorption Defects with Perforation: In Vitro Study

AIM

The present study aimed to evaluate the efficacy of chitosan scaffold combined with calcium silicate cements in the management of internal resorption with perforation.

MATERIALS AND METHODS

Internal resorption cavities were simulated in 20 human permanent maxillary incisors that were then divided into two groups: group I - biodentine and group II - chitosan scaffold combined with biodentine. The samples were evaluated for the mineralization activity at the end of the 7th day and 14th day using scanning electron microscopy-energy dispersive X-ray (SEM-EDX) analysis. The data were recorded, tabulated, and then statistically analyzed.

RESULTS

From the SEM-EDX analysis, the mean score of calcium and phosphorus ion uptake by the material was obtained. Statistical analysis by nonparametric Mann-Whitney test showed that there was statistically significant difference in calcium ion uptake at the end of the 7th day (p = 0.016) and at the end of 14th day (p = 0.043) between the group biodentine and group chitosan scaffold combined with biodentine (p < 0.05).

CONCLUSION

In this present study, the use of chitosan scaffolds combined with biodentine showed a statistically significant difference in the mineralization activity when compared with pure biodentine. These scaffolded biomaterials exhibited greater potential for mineralization in vitro which can be efficiently used for the management of teeth with internal resorption with perforation. Further clinical trials are required for the understanding of their behavior in real-world scenarios.

CLINICAL SIGNIFICANCE

Calcium silicate cements have often exhibited defective hard tissue barrier formation and hence there is a pressing need to search for newer biomaterials that can overcome these shortcomings. Scaffolded biomaterials provide a controlled microcellular environment for bioactivity, and they were found to be efficient in the remineralization of tooth structure. The present study findings indicate that these chitosan scaffolds can be efficiently used in combination with calcium silicate cements for the management of internal resorption with perforation to enhance the treatment outcome.

Microstructure and color stability of calcium silicate-based dental materials exposed to blood or platelet-rich fibrin

OBJECTIVES

To investigate the effects of blood and platelet-rich fibrin (PRF), commonly used scaffolds in regenerative endodontic treatment (RET), on the hydration, microstructure, and color stability of three hydraulic calcium silicate cements (HCSCs), OrthoMTA, RetroMTA, and TotalFill-BC-RRM.

MATERIALS AND METHODS

The HCSCs were prepared and placed into polyethylene molds and transferred to Eppendorf tubes containing PRF, blood, or PBS and then incubated for 1 week or 1 month. The microstructure and hydration of the cements were studied by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD). The chromatic alteration of materials was also measured using a spectrophotometer. The data for color stability were analyzed using 2-way analysis of variance and Tukey post hoc tests.

RESULTS

There was no significant difference between the color stability of cements exposed to PBS (p > 0.05). The chromatic alteration of cements exposed to blood was significantly greater than those exposed to PRF and PBS (p < 0.001). In the presence of blood and PRF, the color change of OrthoMTA was significantly greater than that of RetroMTA and TotalFill (p < 0.05), with no significant difference between RetroMTA and TotalFill (p > 0.05). XRD analysis of all cements revealed a calcium hydroxide peak after 1-week and 1-month exposure to the media; however, OrthoMTA and TotalFill exposed to blood and PRF for 1 month showed weaker calcium hydroxide peaks. SEM images revealed cements exposed to PBS had a different surface microstructure compared to those exposed to blood and PRF. Furthermore, the surface microstructure of HCSCs was influenced by the type of cement radiopacifier (bismuth oxide or zirconium oxide). EDS analysis of the elemental composition in all groups displayed peaks of Ca, O, C, Si, P, and Al.

CONCLUSIONS

Color stability, hydration behavior, and microstructure of HCSCs were affected by exposure to PRF and blood and the type of cement radiopacifier.

CLINICAL RELEVANCE

As some important physicochemical properties of HCSCs could be influenced by the environmental conditions and the type of radiopacifier, alternatives to blood clot and HCSCs containing substitutes for bismuth oxide might be more suitable in RETs.

Selective removal to soft dentine or selective removal to firm dentine for deep caries lesions ın permanent posterior teeth: a randomized controlled clinical trial up to 2 years

OBJECTIVES

The aim of this randomized clinical trial was to compare selective removal to soft dentin (SRSD) and selective removal to firm dentin (SRFD) in permanent teeth. The primary outcome of the study was to compare the success rates of the two caries removal techniques. The secondary outcome of the study was to investigate whether or not calcium silicate-based material (CS) had an effect on the success rate of the treatment.

MATERIALS AND METHODS

Between November 2018 and March 2020, patients with deep caries lesions were invited to participate in the study. Posterior teeth (N = 165) with primary caries lesion radiographically extending ¾ of dentin and positive response to cold test were randomly selected. A total of 134 participants meeting the inclusion criteria were randomized to SRSD and SRFD (control) groups. After the caries removal procedure, teeth with exposed pulps were assigned to the pulp exposure (PE) group, and the SRSD group was further divided into test 1 (with CS) and test 2 groups (without CS). Success was defined as a positive response to the cold test, a negative response to percussion, the absence of pain, an abscess, a fistula, and periapical alterations. Fisher-Freeman-Halton exact tests, Kaplan-Meier survival analysis, and the log-rank tests were performed for comparisons between groups.

RESULTS

No statistically significant difference was found between the success rates of test 1 (100%) and test 2 (93.5%) groups, whereas the proportion of success in control (82.4%) and PE (84%) groups were significantly lower when compared with test groups (p = 0.024; p < 0.05) at the end of 2-year follow-up.

CONCLUSIONS

SRSD had a higher success rate when compared to SRFD to treat deep carious lesions after 2 years of follow-up. The use of CS material after SRSD as a liner had no effect on the treatment outcome.

CLINICAL RELEVANCE

SRSD with good coronal sealing might be recommended without CS application for the treatment of deep caries lesions in permanent teeth.

TRIAL REGISTRATION

Clinical trial registration number NCT04052685 (08/09/2019).

Effects of calcium silicate cements on neuronal conductivity

Objectives

This study evaluated alterations in neuronal conductivity related to calcium silicate cements (CSCs) by investigating compound action potentials (cAPs) in rat sciatic nerves.

Materials and Methods

Sciatic nerves were placed in a Tyrode bath and cAPs were recorded before, during, and after the application of test materials for 60-minute control, application, and recovery measurements, respectively. Freshly prepared ProRoot MTA, MTA Angelus, Biodentine, Endosequence RRM-Putty, BioAggregate, and RetroMTA were directly applied onto the nerves. Biopac LabPro version 3.7 was used to record and analyze cAPs. The data were statistically analyzed.

Results

None of the CSCs totally blocked cAPs. RetroMTA, Biodentine, and MTA Angelus caused no significant alteration in cAPs (p > 0.05). Significantly lower cAPs were observed in recovery measurements for BioAggregate than in the control condition (p < 0.05). ProRoot MTA significantly but transiently reduced cAPs in the application period compared to the control period (p < 0.05). Endosequence RRM-Putty significantly reduced cAPs.

Conclusions

Various CSCs may alter cAPs to some extent, but none of the CSCs irreversibly blocked them. The usage of fast-setting CSCs during apexification or regeneration of immature teeth seems safer than slow-setting CSCs due to their more favorable neuronal effects.

Comparative cytocompatibility of the new calcium silicate-based cement NeoPutty versus NeoMTA Plus and MTA on human dental pulp cells: an in vitro study

OBJECTIVES

The aim of the present in vitro study is to determine the cytocompatibility of the recently introduced NeoPutty in contact with human dental pulp cells compared with its precursor NeoMTA Plus and the classic gold standard MTA Angelus.

MATERIALS AND METHODS

Sample disks were obtained for each of the tested materials (5 mm diameter; 2 mm thickness; n = 30), along with 1:1, 1:2, and 1:4 material eluents. HDPCs were extracted and cultured with the tested materials (test groups) or in unconditioned medium (control group), and the following biocompatibility assays were performed: MTT assay, scratch wound assay, cell cytoskeleton staining assays, and cell attachment assessment via SEM. Additionally, material ion release and surface element composition were evaluated via ICP-MS and SEM-EDX, respectively. Each experimental condition was carried out three times and assessed in three independent experiments. Statistical significance was established at p < 0.05.

RESULTS

1:2 dilutions of all the tested materials exhibited a comparable cell viability to that of the control group at 48 and 72 h of culture (p < 0.05). The same was observed for 1:4 dilutions of the tested materials at 24, 48, and 72 h of culture (p > 0.05). All the tested materials exhibited adequate cytocompatibility in the remaining biocompatibility assays. MTA exhibited a significantly higher calcium ion release compared to NeoPutty and NeoMTA Plus (p < 0.05).

CONCLUSION

The results from the present work elucidate the adequate cytocompatibility of NeoPutty, NeoMTA Plus, and MTA Angelus towards human dental pulp cells.

CLINICAL RELEVANCE

Within the limitations of the present in vitro study, our results may act as preliminary evidence for its use in vital pulp therapy as a pulp capper. However, results need to be interpreted with caution until further clinical supporting evidence is reported.

Effect of exposure to etidronic acid on the bond strength of calcium silicate-based cements after 1 and 21 days: an in vitro study

Background

After reparation of root perforations with calcium silicate-based cements (CSBC), the surface of the material is expected to be exposed to root canal irrigants (RCI) while resuming the root canal treatment.

Methods

The aim of this study was to compare the effect of exposure to a mixture of sodium hypochlorite (NaOCl) and etidronic acid (HEBP) or other irrigants on the Push Out Bond Strength (POBS) of CSBC after two different setting times. 240 root slices 1 mm thick were obtained from single-rooted human teeth. A 1.4 mm diameter perforation was performed on each slice and filled with Biodentine (BD) or ProRoot MTA (PMTA). After 1 or 21 days they were exposed to 17% ethylenediaminetetraacetic acid, 5.25% NaOCl, a mixture of 5.25% NaOCl and 9% HEBP (NaOCl + HEBP) or saline (n = 15) and submitted to a push-out test. POBS results were analysed with ANOVA and Tukey tests.

Results

BD showed higher POBS than PMTA after 1 day (p < .05). After 21 days no differences were found between materials. After 1 day exposure to NaOCl + HEBP resulted in higher POBS, compared to the other irrigants (p < .05).

Conclusion

POBS results are influenced by the cement, the setting time and the exposure to irrigants.

Evaluation of indirect pulp capping using pozzolan-based cement (ENDOCEM-Zr®) and mineral trioxide aggregate - A randomized controlled trial

Background

Pulp capping should always be considered as the primary treatment of choice for teeth without irreversible pulpitis in lesions approaching dental pulp. The predictability of vital pulp therapy has improved with the introduction of newer bioceramic materials.

Aim

The purpose of this randomized controlled trial was to compare the outcomes of mineral trioxide aggregate (MTA) (Angelus, Londrina, Brazil) and a pozzolan-based cement (ENDOCEM-Zr^® [Maruchi, Wonju, Korea]) as an indirect pulp capping (IPC) material.

Materials and Methods

IPC was performed in forty patients who were randomly divided into ENDOCEM-Zr^® and MTA groups. The outcome was assessed using clinical and radiographic tests at different time intervals. The prognostic factors on the outcome of IPC were also evaluated.

Results and Conclusions

The success rate of ENDOCEM-Zr^® and MTA groups was 94.7% and 89.4%, respectively. The results were not statistically significant. Binary logical regression showed that the age of the patient and the status of the pulp before treatment were deciding variables for the outcome of the study. Therefore, it was concluded from the study that the evaluated pozzolan-based cement could be used as an alternative to MTA because of its faster setting time and lower discoloration potential. In addition, pulp capping should be performed with caution in individuals above 40 years and in teeth with reversible pulpitis.

In vitro evaluation of different dental materials used for the treatment of extensive cervical root defects using human periodontal cells

INTRODUCTION

Repair materials for extensive cervical root defects may come in direct contact with periodontal tissues. This in vitro study compared the effects of four calcium silicate cements (CSC), one resin-modified glass ionomer cement, and one glass carbomer cement on primary human gingival fibroblasts (HGF), alveolar osteoblasts (HAO), and a human osteoblast cell line (hFOB 1.19).

METHODS

HGF, HAO, and hFOB were seeded on discoid test specimens. Relative numbers of viable cells were quantitatively assessed after 1 and 24 h for cytotoxicity/adhesion assays and after 4, 24, 48, and 72 h for proliferation assays. Data were statistically analyzed using non-parametric tests (α = 0.05).

RESULTS

Relative to the control (100 %), CSC allowed for mean numbers of 71-81 % viable HGF and 80-82 % viable HAO. Then, 64 % of HGF and 56 % of HAO were assessed on GC Fuji II LC. Mean numbers of viable cells were 59-64 % HGF and 67-68 % HAO for GCP Glass Fill specimens. Cells exposed to CSC over 24 h remained viable and even increased in number. Both cell types adhered almost equally well to CSC and GC Fuji II LC. GCP Glass Fill continued to decrease cell viability and adhesion. CSC-based materials and GC Fuji II LC allowed for HGF and hFOB proliferation; however, none of the tested materials specifically stimulated cell proliferation.

CONCLUSIONS

CSC characterized by low cytotoxicity. GC Fuji II LC shows moderate cytotoxic effects. ProRoot MTA, Harvard MTA, Biodentine, EndoSequence putty, and GC Fuji II LC allow HGF and HAO to adhere and HGF and hFOB to proliferate. GCP Glass Fill decreases cell viability, adhesion, and proliferation.

CLINICAL RELEVANCE

CSC remain the paramount biologic choice for the repair of extensive cervical root defects. GC Fuji II LC might be considered in addition to CSC when the defect comprises supracrestal areas and the restoration requires superior aesthetic and mechanical characteristics.

The effect of human blood on the setting and surface micro-hardness of calcium silicate cements

OBJECTIVES

The purpose of the present study was to evaluate the effects of human blood on the setting and microhardness of calcium silicate cements.

MATERIALS AND METHODS

Three types of silicate-based cements were used: ProRoot MTA (PMTA), OrthoMTA (OMTA), and RetroMTA (RMTA). Mixed cement was placed into polyethylene molds with lengths of 2 and 4 mm. After storage for 4 days under three different storage conditions, i.e., saline, saline after 5 min of human blood, and human blood, the polyethylene molds were removed. With the specimens set, the surface microhardness was measured using a Vickers microhardness tester, crystalline structure was analyzed with X-ray diffraction (XRD), and the surface characteristics were examined with scanning electron microscopy (SEM).

RESULTS

All specimens of 4 mm in length were set with all materials, and the blood groups exhibited lower microhardnesses than did the saline groups (p < 0.05). Among the 2-mm specimens that were stored in blood, the numbers of specimens that set were significantly different across the materials (p < 0.001). Regarding the microhardnesses of the RMTA and OMTA groups, there were no significant differences between storage conditions. For the PMTA group, only one specimen that was set in the blood group exhibited reduced microhardness. XRD showed changes of crystalline structure in the PMTA and OMTA blood group, whereas RMTA did not. SEM analysis revealed more rounded and homogeneous structures and demonstrated a clear lack of acicular or needle-like crystals in the PMTA and OMTA blood groups, while RMTA did not reveal substantial differences between the saline- and blood-stored groups.

CONCLUSION

Blood contamination detrimentally affected the surface microhardnesses of all materials; furthermore, among the 2-mm specimens, blood contamination interfered with normal setting. Therefore, RMTA might be a more suitable choice when blood contamination is unavoidable due to limited depth. Clinical relevance RetroMTA might be a more suitable choice in situations in which blood contamination is unavoidable.

Cytotoxicity and osteogenic potential of silicate calcium cements as potential protective materials for pulpal revascularization

OBJECTIVES

In pulpal revascularization, a protective material is placed coronal to the blood clot to prevent recontamination and to facilitate osteogenic differentiation of mesenchymal stem cells to produce new dental tissues. Although mineral trioxide aggregate (MTA) has been the material of choice for clot protection, it is easily displaced into the clot during condensation. The present study evaluated the effects of recently introduced calcium silicate cements (Biodentine and TheraCal LC) on the viability and osteogenic differentiation of human dental pulp stem cells (hDPSCs) by comparing with MTA Angelus.

METHODS

Cell viability was assessed using XTT assay and flow cytometry. The osteogenic potential of hDPSCs exposed to calcium silicate cements was examined using qRT-PCR for osteogenic gene expressions, alkaline phosphatase enzyme activity, Alizarin red S staining and transmission electron microscopy of extracellular calcium deposits. Parametric statistical methods were employed for analyses of significant difference among groups, with α=0.05.

RESULTS

The cytotoxic effects of Biodentine and TheraCal LC on hDPSCs were time- and concentration-dependent. Osteogenic differentiation of hDPSCs was enhanced after exposure to Biodentine that was depleted of its cytotoxic components. This effect was less readily observed in hDPSCs exposed to TheraCal LC, although both cements supported extracellular mineralization better than the positive control (zinc oxide-eugenol-based cement).

SIGNIFICANCE

A favorable tissue response is anticipated to occur with the use of Biodentine as a blood clot-protecting material for pulpal revascularization. Further investigations with the use of in vivo animal models are required to validate the potential adverse biological effects of TheraCal LC on hDPSCs.