Efficient organic pollutants conversion and electricity generation for carbonate-containing wastewater based on carbonate radical reactions initiated by BiVO4-Au/PVC system

In this paper, we propose an efficient simultaneous refractory organics degradation and electricity generation method for carbonate-containing wastewater based on carbonate radical reactions initiated by a BiVO₄-Au/PVC (PVC: photovoltaic cell) system. In the system, nanoporous BiVO₄ film and Au modified PVC were used as photoanode and photocathode, respectively. HCO₃^- was used as the electrolyte. Carbonate radicals, which have lower recombination rates than hydroxyl radicals and strong oxidation abilities, can be generated easily by the capture reaction of hydroxyl radicals with HCO₃^-, which is one of the most abundant anions in the aquatic environment. The results show that the removal ratios of rhodamine b, methyl orange and methylene blue in the system increased sharply to 77.98 %, 89.15 % and 93.2 % from 18.23 %, 21 % and 23.14 % (BiVO₄-Pt/ SO₄^2-), respectively, after 120 min. Meanwhile, the short-circuit current density is up to 2.19-2.41 times larger than the traditional system. Other common ions in natural water minimally affected the properties of the new system. The excellent performance could be ascribed to large amounts of carbonate radicals in the system, which have great potential for efficient carbonate-containing wastewater treatment and energy recovery.

New combination of pulsed light and iron (II) for carbonate radical production to enhanced degradation of bisphenol A: Parameter optimization and degradation pathway

Bisphenol A(BPA) is a common industrial chemical with significant adverse impacts on Environment and human health. The present work evaluates the efficacy of pulsed light (PL) and Fe2+ ions in activation of sodium percarbonate (SPC) to produce hydroxyl (OH•) and carbonate (CO3•-) radicals for efficient degradation of BPA. The effects of operational parameters such as solution pH, SPC and Fe2+ dose as well as the mixture composition were analyzed and the decomposition pathway of BPA proposed. The BPA was successfully degraded at the initial concentration of 15.0 mg/L and optimized conditions by the PL/Fe2+/SPC process (99.67 ± 0.29%). A rapid reduction in the degradation of BPA was observed with increasing pH due to OH• radicals quenching and also the precipitation of Fe2+. Under the optimized conditions, degradation of BPA by PL/Fe2+/SPC process was five-times faster than the individual process. The quenching experiments revealed that radical and non-radical pathways on BPA degradation was accomplished with OH•, CO3•-, O2•-, and 1O2, while OH• and CO3•- radicals (as a dominant radicals) have the contributions of 80.23% and 8.30%, respectively. Based on the detected byproducts, ring cleavage can be considered as the main transformation mechanism of BPA by the PL/Fe2+/SPC process.

Factors hindering the degradation of pharmaceuticals from human urine in an iron-activated persulfate system

This study investigated the degradation of clofibric acid (CFA), bezafibrate (BZF), and sulfamethoxazole (SMX) in synthetic human urine using a novel mesoporous iron powder-activated persulfate system (mFe-PS system), and identified the factors limiting their degradation in synthetic human urine. A kinetic model was established to expose the radical production in various reaction conditions, and experiments were conducted to verify the modeling results. In the phosphate-containing mFe-PS system, the 120 min removal efficiency of CFA decreased from 95.1% to 76.6% as the phosphate concentration increased from 0.32 to 6.45 mmol/L, but recovered to 90.5% when phosphate concentration increased to 16.10 mmol/L. Meanwhile, the increased concentration of phosphate from 0.32 to 16.10 mmol/L reduced the BZF degradation efficacy from 91.5% to 79.0%, whereas SMX removal improved from 37.3% to 62.9%. The mFe-PS system containing (bi)carbonate, from 4.20 to 166.70 mmol/L, reduced CFA and BZF removal efficiencies from 100% to 76.8% and 80.4%, respectively, and SMX from 83.5% to 56.7% within a 120-min reaction time. In addition, alkaline conditions (pH ≥ 8.0) inhibited CFA and BZF degradations, while nonacidic pH (pH ≥ 7.0) remarkably inhibited SMX degradation. Results of the kinetic model indicated the formation of phosphate (H2PO4·/HPO4·-) and/or carbonate radicals (CO3·-) could limit pharmaceutical removal. The transformation products (TPs) of the pharmaceuticals revealed more incompletely oxidized TPs occurred in the phosphate- and (bi)carbonate-containing mFe-PS systems, and indicated that H2PO4·/HPO4·- mainly degraded pharmaceuticals via a benzene ring-opening reaction while CO3·- preferentially oxidized pharmaceuticals via a hydroxylation reaction.