Laminating of chemically modified silan based nanosols for advanced functionalization of cotton textiles

As per to silver nanoparticles/silicon dioxide nanoparticles (SiO₂@AgNPs) properties (e.g., conductivity, reactant, adsorption, detachment and antimicrobial), many researchers were focused on its preparation technique. A core/shell of silicon dioxide and silver nanoparticles (SiO₂@AgNPs) has been prepared by facile route. The as synthesized core/shell nanoparticles were chemically modified with two different silan compounds, nominated, vinyltriethoxysilan (VTEOS) and (3-aminopropyl)trimethoxysilan (APTEOS). World class facilities such as XRD, FT-IR, TEM, Particle size, DLS, SEM techniques were utilized for the nanoparticles characterization. The nanoparticulate system comprises SiO₂@AgNPs, SiO₂@AgNPs/APTEOS were applied to cotton fabric using butantetracarboxylic acid (BTCA) as across-linking agent. While UV irradiation by photo initiator was used as crosslinking agent for SiO2@AgNPs/VTEOS on cotton fabrics. The Treated cotton fabrics were evaluated for their surface morphology and heat transfer ability as well as antibacterial activity. The obtained data prove that the core/shell was successfully prepared, with AgNPs in core. In addition, both silan compounds (APTEOS, VTEOS) were successfully reacted with the outer shell SiO₂. The results declared also that the treated fabrics exhibit a good antibacterial activity as well as good thermal properties.

Characterization of cross-linked cellulosic ion-exchange adsorbents: 1. Structural properties

The structural characteristics of the HyperCel family of cellulosic ion-exchange materials (Pall Corporation) were assessed using methods to gauge the pore dimensions and the effect of ionic strength on intraparticle architecture. Inverse size exclusion chromatography (ISEC) was applied to the S and STAR AX HyperCel derivatives. The theoretical analysis yielded an average pore radius for each material of about 5nm, with a particularly narrow pore-size distribution. Electron microscopy techniques were used to visualize the particle structure and relate it to macroscopic experimental data. Microscopy of Q and STAR AX HyperCel anion exchangers presented some qualitative differences in pore structure that can be attributed to the derivatization using conventional quaternary ammonium and salt-tolerant ligands, respectively. Finally, the effect of ionic strength was studied through the use of salt breakthrough experiments to determine to what extent Donnan exclusion plays a role in restricting the accessible pore volume for small ions. It was determined that Donnan effects were prevalent at total ionic strengths (TIS) less than 150mM, suggesting the presence of a ligand-containing partitioning volume within the pore space.

Controlled graft polymerization on the surface of filter paper via enzyme-initiated RAFT polymerization

This study reports on eco-friendly graft polymerization approach for the modification of a cellulosic material via combination between enzymatic catalysis and reversible addition-fragmentation chain transfer polymerization (RAFT). Polyacrylamide (PAM) was polymerized on a cellulosic filter paper via horseradish peroxidase (HRP)-initiated RAFT polymerization. The results of grafting ratio, conversion, and pseudo-first-order kinetics were proved that the PAM graft polymerization on the filter paper followed RAFT rules. The results of Attenuated total reflection (ATR-FTIR), elemental analysis, and X-ray photoelectron spectroscopy (XPS) confirmed the presence of PAM in PAM-grafted filter paper. The results of water contact angle and Thermogravimetric analysis (TG) evidenced the change in the wetting properties and thermal performance, respectively of the treated filter paper. This work provides a new environmentally approach to graft polymerization on cellulosic materials.

Facilitating microplastic quantification through the introduction of a cellulose dissolution step prior to oxidation: Proof-of-concept and demonstration using diverse samples from the Inner Oslofjord, Norway

Identifying and quantifying microplastic in marine samples can be facilitated by removing natural organic matter (NOM). Cellulosic material, like chitin, however, are a type of NOM that is resistant to chemical digestion, and difficult to eliminate from samples. To address this, a two-step digestion method was developed to remove or reduce cellulosic materials in diverse marine media. This method was applied to reference microplastics, reference cellulosic materials, and diverse marine samples from the Inner Oslofjord Norway. This included plankton, seabed sediments near a water treatment plant and driftline sand. The method was developed and tested for plastic particles >45 μm. The first-step was to pre-dissolve cellulosic materials using a mixture of urea:thiourea:NaOH. This was followed by an oxidative digestion step, here using H₂O₂ and NaOH. Most reference plastics were unaffected, except minor effects for PET and nylon. After sufficient repetitions, cellulosic materials in both reference and marine samples were largely removed. This method was compared to other digestion methods used for microplastic quantification, including single-step oxidation, alkaline treatment, acid treatment and enzymatic treatment. The results indicate that the pre-dissolution step greatly facilitates NOM and cellulosic material digestion for the purpose of microplastic quantification.

Characterization of cross-linked cellulosic ion-exchange adsorbents: 2. Protein sorption and transport

Adsorption behavior in the HyperCel family of cellulosic ion-exchange materials (Pall Corporation) was characterized using methods to assess, quantitatively and qualitatively, the dynamics of protein uptake as well as static adsorption as a function of ionic strength and protein concentration using several model proteins. The three exchangers studied all presented relatively high adsorptive capacities under low ionic strength conditions, comparable to commercially available resins containing polymer functionalization aimed at increasing that particular characteristic. The strong cation- and anion-exchange moieties showed higher sensitivity to increasing salt concentrations, but protein affinity on the salt-tolerant STAR AX HyperCel exchanger remained strong at ionic strengths normally used in downstream processing to elute material fully during ion-exchange chromatography. Very high uptake rates were observed in both batch kinetics experiments and time-series confocal laser scanning microscopy, suggesting low intraparticle transport resistances relative to external film resistance, even at higher bulk protein concentrations where the opposite is typically observed. Electron microscopy imaging of protein adsorbed phases provided additional insight into particle structure that could not be resolved in previous work on the bare resins.

Direct catalytic production of sorbitol from waste cellulosic materials

Cotton wool, cotton textile, tissue paper and printing paper, all potential waste cellulosic materials, were directly converted to sorbitol using a Ru/CNT catalyst in the presence of H₂ and using only water as solvent, without any acids. Conversions up to 38% were attained for the raw substrates, with sorbitol yields below 10%. Ball-milling of the materials disrupted their crystallinity, allowing reaching 100% conversion of cotton wool, cotton textile and tissue paper after 4h, with sorbitol yields around 50%. Mix-milling these materials with the catalyst greatly enhanced their conversion rate, and the materials were efficiently converted to sorbitol with a yield around 50% in 2h. However, ball- and mix-milled printing paper presented a conversion of only 50% after 5h, with sorbitol yields of 7%. Amounts of sorbitol of 0.525, 0.511 and 0.559g could be obtained from 1g of cotton wool, cotton textile and tissue paper, respectively.

Harnessing cellulose-binding protein domains for the development of functionalized cellulose materials

Cellulosic materials are attracting increasing research interest because of their abundance, biocompatibility, and biodegradability, making them suitable in multiple industrial and medical applications. Functionalization of cellulose is usually required to improve or expand its properties to meet the requirements of different applications. Cellulose-binding domains (CBDs) found in various proteins have been shown to be powerful tools in the functionalization of cellulose materials. In this review, we firstly introduce the structural characteristics of commonly used CBDs belonging to carbohydrate-binding module families 1, 2 and 3. Then, we summarize four main kinds of methodologies for employing CBDs to modify cellulosic materials (i.e., CBD only, genetic fusion, non-covalent linkage and covalent linkage). Via different approaches, CBDs have been used to improve the material properties of cellulose, immobilize enzymes for biocatalysis, and design various detection tools. To achieve industrial applications, researches for lowering the production cost of CBDs, improving their performance (e.g., stability), and expanding their application scenarios are still in need.

Bridging papermaking and hydrogel production: Nanoparticle-loaded cellulosic hollow fibers with pitted walls as skeleton materials for multifunctional electromagnetic hydrogels

Electromagnetic hydrogels have attracted significant attention due to their vast potential in soft robotics, biomedical engineering, and energy harvesting. To facilitate future commercialization via large-scale industrial processes, we present a facile concept that utilizes the specialized knowledge of papermaking to fabricate hydrogels with multifunctional electromagnetic properties. The principles of papermaking wet end chemistry, which involves the handling of interactions among cellulosic fibers, fines, polymeric additives, and other components in aqueous systems, serves as a key foundation for this concept. Notably, based on these principles, the versatile use of chemical additives in combination with cellulosic materials enables the tailored design of various products. Our methodology exploits the unique hierarchically pitted and hollow tube-like structures of papermaking grade cellulosic fibers with discernible pits, enabling the incorporation of magnetite nanoparticles through lumen loading. By combining microscale softwood-derived cellulosic fibers with additives, we achieve dynamic covalent interactions that transform the cellulosic fiber slurry into an impressive hydrogel. The cellulosic fibers act as a skeleton, providing structural support within the hydrogel framework and facilitating the dispersion of nanoparticles. In accordance with our concept, the typical hydrogel exhibits combined attributes, including electrical conductivity, self-healing properties, pH responsiveness, and dynamic rheologic behavior. Our approach not only yields hydrogels with interesting properties but also aligns with the forefront of advanced cellulosic material applications. These materials hold the promise in remote strain sensing devices, electromagnetic navigation systems, contactless toys, and flexible electronic devices. The concept and findings of the current work may shed light on materials innovation based on traditional pulp and paper processes. Furthermore, the facile processes involved in hydrogel formation can serve as valuable tools for chemistry and materials education, providing easy demonstrations of principles for university students at different levels.

Characterizing the heterogeneous contamination of commercial paper and board food packaging at different scales

Assessing the contamination of paper and board (P&B) food packaging materials poses significant challenges due to the sensitivity limits of analytical methods and the low precision of sampling processes. This study aims to enhance the understanding of P&B food packaging contamination by investigating the distribution of contaminants at different scales using a combination of chromatographic and spectroscopic techniques. A total of 36 substances were targeted, including phthalates, photoinitiators, and bisphenol A. Key findings reveal that intra-packaging variability can lead to concentration variations by a factor of 2-7. Recycled materials generally exhibit higher contamination levels, with concentrations of certain contaminants reaching up to 700 mg/kg. Microscopy, including confocal laser scanning microscopy (CLSM) and Raman micro-spectroscopy, enabled the identification and differentiation of contaminants, highlighting specific marker molecules and characteristic Raman bands. The study underscores the necessity of comprehensive sampling strategies, advocating for the grinding of entire packaging to obtain representative samples. The introduction of contamination "fingerprints," based on occurrences and correlations between concentrations, offers a promising approach for hazard identification and risk assessment. Overall, the findings contribute to the development of safer and more sustainable food packaging solutions, emphasizing the need for improved analytical techniques and standardized sampling methods in the context of increasing use of recycled materials.