Long-term water sorption/solubility of two dental bonding agents containing a colloidal dispersion of titanium dioxide

The aim was to analyze the influence of the incorporation of 4% by mass of colloidal dispersion of titanium dioxide (TiO2) nanoparticles on the long-term water sorption and solubility of two commercial universal bonding agents. In vitro studies. A colloidal dispersion of TiO2 nanoparticles was formulated and blended into two commercial dental bonding agents, i.e., Ambar Universal (FGM, Brasil) and G-Premio Bond Universal (GC, America) at 4% by mass. Forty bonding agent discs were fabricated and segregated into four bonding agent groups of 10 discs each, i.e., GA: Ambar Universal (control), GB: Ambar Universal (4% TiO2 incorporated), GC: G-Premio Bond universal (control), and GD: G-Premio Bond (4% TiO2 incorporated). The bonding agent discs were developed by dispensing the bonding agents into a silicone cast of 5 mm diameter and 1 mm depth. After bonding agent discs were desiccated, the cured discs were weighed and kept in distilled water to be evaluated for water sorption and solubility over 1 year storage period. Statistical analysis was performed by independent variable t-test performed using the IBM SPSS software (Chicago, IL: SPSS Inc). The incorporated bonding agent groups (GA and GB) showed significantly lower (P < 0.05) water sorption and solubility following 1 year of water storage in comparison to the control bonding agents. Both GC and GD demonstrated remarkably lower water sorption and solubility than GA and GB. Incorporation of the colloidal dispersion of TiO2 nanoparticles at 4% by mass into the universal bonding agents has significantly reduced their water sorption and solubility contrast to their control groups.

Multidomain drug delivery systems of β-casein micelles for the local oral co-administration of antiretroviral combinations

The antiretroviral (ARV) cocktailrevolved the treatment of the human immunodeficiency virus (HIV) infection. Drug combinations have been also tested to treat other infectious diseases, including the recentcoronavirus disease 2019 (COVID-19) outbreak. To simplify administration fixed-dose combinationshave been introduced, however, oral anti-HIV therapy still struggles with low oral bioavailability of many ARVs.This work investigated the co-encapsulation of two clinically relevant ARV combinations,tipranavir (TPV):efavirenz (EFV) anddarunavir (DRV):efavirenz (EFV):ritonavir (RTV),within the core of β-casein (bCN) micelles. Encapsulation efficiency in both systems was ~100%. Cryo-transmission electron microscopy and dynamic light scattering of the ARV-loaded colloidaldispersions indicatefull preservation of the spherical morphology, and x-ray diffraction confirm that the encapsulated drugs are amorphous. To prolong the physicochemical stabilitythe formulations were freeze-driedwithout cryo/lyoprotectant, and successfully redispersed, with minor changes in morphology.Then, theARV-loaded micelles were encapsulated within microparticles of Eudragit® L100, which prevented enzymatic degradation and minimized drug release under gastric-like pH conditionsin vitro. At intestinal pH, the coating polymer dissolved and released the nanocarriers and content. Overall, our results confirm the promise of this flexible and modular technology platform for oral delivery of fixed dose combinations.

Viscosity measurement dataset for a water-based drilling mud-carbon nanotube suspension at high-pressure and high-temperature

This data article presents the measured viscosity of a carbon nanotube (CNT) suspension in water-based drilling mud, also termed as nano-muds (“Rheology of a colloidal suspension of carbon nanotube particles in a water-based drilling fluid” Anoop et al., 2019). The apparent viscosity values of the nano-mud samples are measured using a high-pressure high-temperature viscometer at different shear rates, working based on a rotor and bob technique. The pressure and temperature of the samples are independently varied during the measurements from ambient conditions to 171 MPa and 176 °C, respectively, within two experimental schedules. Viscosity measurements for varying nanoparticle concentration, shear rate, pressure, and temperature are reported here for different CNT concentrations.

Nanoparticle stability in lake water shaped by natural organic matter properties and presence of particulate matter

Predicting nanoparticle (NP) fate in the environment continues to remain a challenge, especially for natural surface water systems, where NPs can hetero-aggregate with natural organic and mineral suspended matter. Here we present the interactions and aggregation behavior of TiO₂ NPs with natural organic matter (NOM) in a natural lake water. NP fate in a synthetic water of the same pH and ionic composition was also tested in the presence and absence of NOM analogs to gain insight into the different stabilizing effects of each NOM type. Several complementary analytical techniques were utilized to assess lake NOM composition, including pyrolysis-gas chromatography-mass spectrometry, gel permeation chromatography, the polarity rapid-assessment method, and Nanoparticle Tracking Analysis. In the natural lake water, the TiO₂ NPs preferentially interacted with mostly anionic NOM of high and medium molecular weight (~1200-1450 and 400-520 Da). Specifically, strong interactions with proteins and polyhydroxy aromatics were observed. NP fate and stability were determined in both raw lake water containing mineral particulate matter and total NOM (NOM_tot) and filtered lake water containing only NOM <0.8 μm (NOM_<0.8), with different aggregation profiles observed over time. Additionally, three times the number of TiO₂ NPs remained in suspension when only NOM_<0.8 was present compared to the unfiltered water containing mineral particulate matter and NOM_tot. These results demonstrate the contrasting NP fates in the aquatic environment according to the presence of NOM_tot vs. NOM_<0.8 and further suggest that the use of pure NOM analogs may not accurately represent NP interactions and fate in the natural system.

Colloidal 2D nanosheets of MoS2 and other transition metal dichalcogenides through liquid-phase exfoliation

This review focuses on the exfoliation of transition metal dichalcogenides MQ₂ (TMD, M=Mo, W, etc., Q=S, Se, Te) in liquid media, leading to the formation of 2D nanosheets dispersed in colloids. Nowadays, colloidal dispersions of MoS₂, MoSe₂, WS₂ and other related materials are considered for a wide range of applications, including electronic and optoelectronic devices, energy storage and conversion, sensors for gases, catalysts and catalyst supports, biomedicine, etc. We address various methods developed so far for transferring these materials from bulk to nanoscale thickness, and discuss their stabilization and factors influencing it. Long-time known exfoliation through Li intercalation has received renewed attention in recent years, and is recognized as a method yielding highest dispersed concentrations of single-layer MoS₂ and related materials. Latest trends in the intercalation/exfoliation approach include electrochemical lithium intercalation, experimenting with various intercalating agents, multi-step intercalation, etc. On the other hand, direct sonication in solvents is a much simpler technique that allows one to avoid dangerous reagents, long reaction times and purifying steps. The influence of the solvent characteristics on the colloid formation was closely investigated in numerous recent studies. Moreover, it is being recognized that, besides solvent properties, sonication parameters and solvent transformations may affect the process in a crucial way. The latest data on the interaction of MoS₂ with solvents evidence that not only solution thermodynamics should be employed to understand the formation and stabilization of such colloids, but also general and organic chemistry. It appears that due to the sonolysis of the solvents and cutting of the MoS₂ layers in various directions, the reactive edges of the colloidal nanosheets may bear various functionalities, which participate in their stabilization in the colloidal state. In most cases, direct exfoliation of MQ₂ into colloidal nanosheets is conducted in organic solvents, while a small amount of works report low-concentrated colloids in pure water. To improve the dispersion abilities of transition metal dichalcogenides in water, various stabilizers are often introduced into the reaction media, and their interactions with nanosheets play an important role in the stabilization of the dispersions. Surfactants, polymers and biomolecules usually interact with transition metal dichalcogenide nanosheets through non-covalent mechanisms, similarly to the cases of graphene and carbon nanotubes. Finally, we survey covalent chemical modification of colloidal MQ₂ nanosheets, a special and different approach, consisting in the functionalization of MQ₂ surfaces with help of thiol chemistry, interaction with electrophiles, or formation of inorganic coordination complexes. The intentional design of surface chemistry of the nanosheets is a very promising way to control their solubility, compatibility with other moieties and incorporation into hybrid structures. Although the scope of the present review is limited to transition metal dichalcogenides, the dispersion in colloids of other chalcogenides (such as NbS₃, VS₄, Mo₂S₃, etc.) in many ways follows similar trends. We conclude the review by discussing current challenges in the area of exfoliation of MoS₂ and its related materials.

Relevance of interfacial viscoelasticity in stability and conformation of biomolecular organizates at air/fluid interface

Soft materials are complex macromolecular systems often exhibiting perplexing non-Newtonian viscoelastic properties, especially when the macromolecules are entangled, crowded or cross-linked. These materials are ubiquitous in the biology, food and pharma industry and have several applications in biotechnology and in the field of biosensors. Based on the length scales, topologies, flexibility and concentration, the systems behave both as liquids (viscous) and solids (elastic). Particularly, for proteins and protein-lipid systems, viscoelasticity is an important parameter because it often relates directly to stability and thermodynamic interactions of the pure biological components as well as their mixtures. Despite the large body of work that is available in solution macro-rheometry, there are still a number of issues that need to be addressed in dealing with proteins at air/fluid interfaces and with protein-polymer or protein-lipid interfaces that often exhibit very low interfacial viscosity values. Considering the important applications that they have in biopharmaceutical, biotechnological and nutraceutical industries, there is a need for developing methods that meet the following three specific issues: small volume, large dynamic range of shear rates and interfacial properties of different biomolecules. Further, the techniques that are developed should include Newtonian, shear thinning and yielding properties, which are representative of the different solution behaviors typically encountered. The review presented here is a comprehensive account of the rheological properties of different biomolecules at air/fluid and solid/fluid interfaces. It addresses the usefulness of 'viscoelasticity' of the systems at the interfaces analyzed at the molecular level that can be correlated with the microscopic material properties and touches upon some recent techniques in microrheology that are being used to measure the unusually low viscosity values sensitively.

Direct Probing of Dispersion Quality of ZrO2 Nanoparticles Coated by Polyelectrolyte at Different Concentrated Suspensions

This study reports useful application of the electrokinetic sonic amplitude (ESA) technique in combination with rheometry and electron microscopy techniques for direct probing the stability of low and high-concentrated zirconia (ZrO2) nanosuspensions in the presence of an alkali-free anionic polyelectrolyte dispersant Dolapix CE64. A comparative study of the electrokinetic characteristics and the rheological behavior of concentrated ZrO2 nanosuspensions has been done. Good agreement was obtained from relationship between the electrokinetic characteristics (zeta potential, ESA signal), viscosity, and its pH dependence for each concentrated ZrO2 nanosuspension with different dispersant concentration in the range of 0.9-1.5 mass%. A nanoscale colloidal hypothesis is proposed to illustrate that the addition of different amounts of dispersant influences on both the stability and the electrokinetic and rheological properties of concentrated ZrO2 nanosuspensions. It is found that an optimum amount of 1.4 mass% dispersant at the inherent pH (>9.2) can be attached fully onto the nanoparticles with sufficient electrosteric dispersion effects, suitable for casting applications. Supplementary scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HR-TEM) analyses followed by colorization effect were taken to verify the visible interaction between dispersant and nanoparticles surfaces. SEM and HR-TEM images proved the existence of visible coverage of dispersant on the surface of individual nanoparticles and showed that thin polyelectrolyte layers were physically bound onto the particles' surfaces. This study will be of interest to materials scientists and engineers who are dealing with dispersion technology, nanoparticle surface treatments, functionalization, characterization, and application of bio/nanoparticle suspensions at various concentrations using different types of polymers.

Wetting dynamics of colloidal dispersions on agar gel surfaces

The effects of silica particle addition on the wetting velocity on flat and fractal agar gel surfaces were analyzed along with the applicability of such particles for controlling the wetting dynamics of water. The contact angles (θD) of the colloidal dispersions obeyed the power law, i.e., θD∝t(-x), where t is time and x is a constant. Wetting was inhibited by the addition of a suitable amount of 20-nm-diameter silica particles. Specifically, the exponent x reached a minimum value for a silica composition of 0.1wt%. However, such inhibition effects were not observed upon the addition of silica particles with diameters of 100, 550, and, 1000nm. The mechanism of the inhibition of the liquid wetting on gel surfaces may be attributed to a slight increase in local viscosity around the contact line during wetting.

Functionalization of magnetic nanocrystals by oligo (ethylene oxide) chains carrying diazonium and iniferter end groups

The water stability of iron oxide nanoparticles (NPs) is a major issue for biomedical and biological applications. This paper presents a versatile approach for preparing water-soluble iron oxide nanoparticles coated by bifunctional oligo(ethylene oxide) (OEO) chains, carrying on the one side a diazonium end group for covalent grafting at the NP surface and on the other side an iniferter group (diethyl dithiocarbamate) for initiating the growing of poly(methacrylic acid). The nanoparticles were synthesized by coprecipitation in basic media and functionalized in situ by adding the diazonium salt directly in the synthesis medium. Oligo(ethylene oxide) with various chain lengths (from one to three monomer units) was grafted at the NP surface using this approach. The length of the OEO spacer between the NP surface and the iniferter end group was found to be a critical parameter for controlling the colloidal stability of the hybrid NPs. The polymerization time was also shown to strongly influence their colloidal stability, emphasizing the interest to control the interfacial properties of the hybrids for obtaining stable dispersions in water.