Technical aspects and challenges of colorimetric detection with microfluidic paper-based analytical devices (μPADs) - A review

Paper-based devices are a leading alternative among the main analytical tools for point-of-care testing, due to their portability, low-cost, and ease-of-use. Colorimetric readouts are the most common method of detection in these microfluidic devices, enabling qualitative, semi-quantitative and fully quantitative analysis of multiple analytes. There is a multitude of ways to obtain a colorimetric output in such devices, including nanoparticles, dyes, redox and pH indicators, and each has unique drawbacks and benefits. There are also multiple variables that impact the analysis of colorimetric reactions in microfluidic paper-based systems, including color homogeneity, image capture methods, and the data handling itself. Here, we present a critical review of recent developments and challenges of colorimetric detection on microfluidic paper-based analytical devices (μPADs), and present thoughts and insights towards future perspectives in the area to improve the use of colorimetric readouts in conjunction with μPADs.

Ultrasensitive aptamer biosensor for malathion detection based on cationic polymer and gold nanoparticles

In this work, we have demonstrated a novel sensing strategy for an organophosphorus pesticide namely, malathion, employing unmodified gold nanoparticles, aptamer and a positively charged, water-soluble polyelectrolyte Polydiallyldimethylammonium chloride (PDDA). The PDDA when associated with the aptamer prevents the aggregation of the gold-nanoparticles while no such inhibition is observed when the aptamer specific pesticide is added to the solution, thereby changing the color of the solution from red to blue. This type of biosensor is quite simple and straightforward and can be completed in a few minutes without the need of any expensive equipment or trained personnel. The proposed method was linear in the concentration range of 0.5-1000pM with 0.06pM as the limit of detection. Moreover, the proposed assay selectively recognized malathion in the presence of other interfering substances and thus, can be applied to real samples for the rapid screening of malathion.

Novel approaches for colorimetric measurements in analytical chemistry - A review

Colorimetric techniques have been developed and used in routine analyses for over a century and apparently all their potentialities have been exhaustively explored. However, colorimetric techniques have gained high visibility in the last two decades mainly because of the development of the miniaturization concept, for example, paper-based analytical devices that mostly employ colorimetric reactions, and by the advances and popularity of image capture instruments. The impressive increase in the use of these devices was followed by the development and enhancement of different modes of color detection to meet the demands of making qualitative, semi-quantitative, and fully quantitative analyses of multiple analytes. Cameras, scanners, and smartphones are now being used for this purpose and have become suitable alternatives for different approaches to colorimetric analysis; this, in addition to advancements in miniaturized devices. On the other hand, recent developments in optoelectronics technologies have launched more powerful, more stable and cheaper light-emitting diodes (LEDs), which once again have become an interesting tool for the design of portable and miniaturized devices based on colored reactions. Here, we present a critical review of recent developments and challenges of colorimetric detection in modern analytical chemistry in the last five years, and present thoughts and insights towards future perspectives in the area to improve the use of colorimetric detection in different application approaches.

Highly selective and sensitive paper-based colorimetric sensor using thiosulfate catalytic etching of silver nanoplates for trace determination of copper ions

A novel, highly selective and sensitive paper-based colorimetric sensor for trace determination of copper (Cu(2+)) ions was developed. The measurement is based on the catalytic etching of silver nanoplates (AgNPls) by thiosulfate (S2O3(2-)). Upon the addition of Cu(2+) to the ammonium buffer at pH 11, the absorption peak intensity of AuNPls/S2O3(2-) at 522 nm decreased and the pinkish violet AuNPls became clear in color as visible to the naked eye. This assay provides highly sensitive and selective detection of Cu(2+) over other metal ions (K(+), Cr(3+), Cd(2+), Zn(2+), As(3+), Mn(2+), Co(2+), Pb(2+), Al(3+), Ni(2+), Fe(3+), Mg(2+), Hg(2+) and Bi(3+)). A paper-based colorimetric sensor was then developed for the simple and rapid determination of Cu(2+) using the catalytic etching of AgNPls. Under optimized conditions, the modified AgNPls coated at the test zone of the devices immediately changes in color in the presence of Cu(2+). The limit of detection (LOD) was found to be 1.0 ng mL(-1) by visual detection. For semi-quantitative measurement with image processing, the method detected Cu(2+) in the range of 0.5-200 ng mL(-1)(R(2)=0.9974) with an LOD of 0.3 ng mL(-1). The proposed method was successfully applied to detect Cu(2+) in the wide range of real samples including water, food, and blood. The results were in good agreement according to a paired t-test with results from inductively coupled plasma-optical emission spectrometry (ICP-OES).

Using target-specific aptamers to enhance the peroxidase-like activity of gold nanoclusters for colorimetric detection of tetracycline antibiotics

Tetracycline antibiotics (TCs) are one kind of broad spectrum bacteriostatic agents. However, excessive use of TCs will have a threat to the environment and human health. Therefore, it is necessary to develop a simple method for direct detection of TCs. Based on intrinsic peroxidase-like activity of gold nanoclusters (AuNCs), we used TC-specific aptamers (Apt) to improve the catalytic activity of AuNCs toward the peroxidase substrate 3,3',5,5'-tetramethylbenzidine (TMB) oxidation by H₂O₂, and established a colorimetric sensing platform for TCs. The catalytic enhancement by Apt allows for sensitive colorimetric detection of TCs, and Apt as molecular recognition elements can specifically combine with TCs leading to high selectivity. This developed sensing platform can quantitatively detect TCs in the concentration range of 1-16 μM with a limit of detection (LOD) as low as 46 nM. Interestingly, the naked-eye detection capability of this method is estimated to be 0.5 μM. Finally, the detection of TCs in real samples like drugs and milk was validated.

Colorimetric detection of heavy metal ions with various chromogenic materials: Strategies and applications

Detection of heavy metal ions has drawn significant attention in environmental and food area due to their threats to the human health and ecosystem. Colorimetry is one of the most frequently-used methods for the detection of heavy metal ions owing to its simplicity, easy operation and rapid on-site detection. The development of chromogenic materials and their sensing mechanisms are the key research direction in the area of colorimetric method. Since each chromogenic material has their unique optical and chemical properties, they have totally different colorimetric sensing mechanisms. This review focuses on the chromogenic materials and their sensing strategies for the colorimetric detection of heavy metal ions. We divide the chromogenic materials into three types, including organic materials, inorganic materials, and other materials. As for each type of chromogenic material, we discuss their detailed sensing strategies, sensing performance, and real sample applications. Moreover, current challenges and perspectives related to the colorimetry of heavy metal ions are also discussed in this review. The aim of this review is to help readers to better understand the principles of colorimetric methods for heavy metal ions and push the development of rapid detection of heavy metal ions.

DNA aptamer-based colorimetric detection platform for Salmonella Enteritidis

Food safety is a major issue to protect public health and a key challenge is to find detection methods for identification of hazards in food. Food borne infections affects millions of people each year and among pathogens, Salmonella Enteritidis is most widely found bacteria causing food borne diseases. Therefore, simple, rapid, and specific detection methods are needed for food safety. In this study, we demonstrated the selection of DNA aptamers with high affinity and specificity against S. Enteritidis via Cell Systematic Evolution of Ligands by Exponential Enrichment (Cell-SELEX) and development of sandwich type aptamer-based colorimetric platforms for its detection. Two highly specific aptamers, crn-1 and crn-2, were developed through 12 rounds of selection with K_d of 0.971µM and 0.309µM, respectively. Both aptamers were used to construct sandwich type capillary detection platforms. With the detection limit of 10³ CFU/mL, crn-1 and crn-2 based platforms detected target bacteria specifically based on color change. This platform is also suitable for detection of S. Enteritidis in complex food matrix. Thus, this is the first to demonstrate use of Salmonella aptamers for development of the colorimetric aptamer-based detection platform in its identification and detection with naked eye in point-of-care.

Method for colorimetric detection of double-stranded nucleic acid using leuco triphenylmethane dyes

Because loop-mediated isothermal amplification (LAMP) can amplify substantial amounts of DNA under isothermal conditions, its applications for simple genetic testing have attracted considerable attention. A positive LAMP reaction is indicated by the turbidity caused by by-products or by the color change after adding a metallochromic indicator to the reaction solution, but these methods have certain limitations. Leuco crystal violet (LCV), a colorless dye obtained after sodium sulfite treatment of crystal violet (CV), was used as a new colorimetric method for detecting LAMP. LCV is reconverted into CV through contact with double-stranded DNA (dsDNA). Therefore, the positive reaction of LAMP is indicated by color change from colorless to violet. The assay is sensitive enough to detect LAMP products, with a detection limit of 7.1 ng/μl for dsDNA. It is also highly selective to dsDNA, and interference with single-stranded DNA and deoxynucleotide triphosphates (dNTPs) is not observed. LCV facilitates direct colorimetric detection of the main product rather than a by-product of the LAMP reaction; therefore, this method can be used under various reaction conditions such as those with added pyrophosphatase in solution. This colorimetric LAMP detection method using LCV is useful for point-of-care genetic testing given its simplicity.

Single-atom nanozyme enabled fast and highly sensitive colorimetric detection of Cr(VI)

As a high biologically toxic heavy metal ion, Cr(VI) will cause environmental pollution and endanger human health. Therefore, the development of fast, simple and visible detection methods for Cr(VI) is extremely important to control its harm. Toward this end, we report the establishment of a colorimetric sensing method for Cr(VI) based on single-atom nanozymes for enhanced detection performance. Firstly, we prepared SA-Fe/NG as peroxidase mimetic by anchoring Fe single-atom onto a single-layer of two-dimensional nitrogen-doped graphene. The SA-Fe/NG showed superiorly high oxidation catalytic activity due to its 100% atomic utilization and existing Fe-N-C structure. Furthermore, with 3,3',5,5'-tetramethylbenzidine (TMB) as a colorimetric sensing probe, and 8-hydroxyquinoline (8-HQ) as an inhibitor for the oxidation of TMB, the detection of Cr(VI) was realized through specific interaction between Cr(VI) and 8-HQ, which led to the recovery of oxTMB in blue color. Our established method showed superior sensitivity with a detection limit of 3 nM and a linear range of 30 nM to 3 μM. It also exhibited high selectivity for a series of metal cations, and has been successfully applied to the detection of Cr(VI) in tap water and tuna samples.

Highly sensitive and specific colorimetric detection of cancer cells via dual-aptamer target binding strategy

Simple, rapid, sensitive and specific detection of cancer cells is of great importance for early and accurate cancer diagnostics and therapy. By coupling nanotechnology and dual-aptamer target binding strategies, we developed a colorimetric assay for visually detecting cancer cells with high sensitivity and specificity. The nanotechnology including high catalytic activity of PtAuNP and magnetic separation & concentration plays a vital role on the signal amplification and improvement of detection sensitivity. The color change caused by small amount of target cancer cells (10 cells/mL) can be clearly distinguished by naked eyes. The dual-aptamer target binding strategy guarantees the detection specificity that large amount of non-cancer cells and different cancer cells (10(4) cells/mL) cannot cause obvious color change. A detection limit as low as 10 cells/mL with detection linear range from 10 to 10(5) cells/mL was reached according to the experimental detections in phosphate buffer solution as well as serum sample. The developed enzyme-free and cost effective colorimetric assay is simple and no need of instrument while still provides excellent sensitivity, specificity and repeatability, having potential application on point-of-care cancer diagnosis.

A simple method to produce 2D and 3D microfluidic paper-based analytical devices for clinical analysis

This paper describes the fabrication of 2D and 3D microfluidic paper-based analytical devices (μPADs) for monitoring glucose, total protein, and nitrite in blood serum and artificial urine. A new method of cutting and sealing filter paper to construct μPADs was demonstrated. Using an inexpensive home cutter printer soft cellulose-based filter paper was easily and precisely cut to produce pattern hydrophilic microchannels. 2D and 3D μPADs were designed with three detection zones each for the colorimetric detection of the analytes. A small volume of samples was added to the μPADs, which was photographed after 15 min using a digital camera. Both μPADs presented an excellent analytical performance for all analytes. The 2D device was applied in artificial urine samples and reached limits of detection (LODs) of 0.54 mM, 5.19 μM, and 2.34 μM for glucose, protein, and nitrite, respectively. The corresponding LODs of the 3D device applied for detecting the same analytes in artificial blood serum were 0.44 mM, 1.26 μM, and 4.35 μM.

Improved assessment of accuracy and performance using a rotational paper-based device for multiplexed detection of heavy metals

In this work, a novel rotational microfluidic paper-based device was developed to improve the accuracy and performance of the multiplexed colorimetric detection by effectively avoiding the diffusion of colorimetric reagent on the detection zone. The integrated paper-based rotational valves were used to control the connection or disconnection between detection zones and fluid channels. Based on the manipulation of the rotational valves, this rotational paper-based device could prevent the random diffusion of colorimetric reagent and reduce the error of quantitative analysis considerably. The multiplexed colorimetric detection of heavy metals Ni(II), Cu(II) and Cr(VI) were implemented on the rotational device and the detection limits could be found to be 4.8, 1.6, and 0.18mg/L, respectively. The developed rotational device showed the great advantage in improving the detection accuracy and was expected to be a low-cost, portable analytical platform for the on-site detection.

Aptamer-based colorimetric detection of proteins using a branched DNA cascade amplification strategy and unmodified gold nanoparticles

A branched DNA amplification strategy was employed to design a colorimetric aptameric biosensor using unmodified gold nanoparticles (AuNPs). First, a programmed DNA dendritic nanostructure was formed using two double-stranded substrate DNAs and two single-stranded auxiliary DNAs as assembly components via a target-assisted cascade amplification reaction, and it was then captured by DNA sensing probe-stabilized AuNPs. The release of sensing probes from AuNPs led to the formation of unstable AuNPs, promoting salt-induced aggregation. By integrating the signal amplification capacity of the branched DNA cascade reaction and unmodified AuNPs as a sensing indicator, this amplified colorimetric sensing strategy allows protein detection with high sensitivity (at the femtomole level) and selectivity. The limit of detection of this approach for VEGF was lower than those of other aptamer-based detection methods. Moreover, this assay provides modification-free and enzyme-free protein detection without sophisticated instrumentation and might be generally applicable to the detection of other protein targets in the future.

A colorimetric biosensor for simultaneous ochratoxin A and aflatoxins B1 detection in agricultural products

Colorimetric biosensors have been widely applied to mycotoxins testing. However, the colorimetric assay previously reported used a single color to detect one mycotoxin, and there were few reports on the simultaneous detection of multiple mycotoxins. In this work, a colorimetric biosensor for dual mycotoxins detection was developed. A Fe₃O₄/GO based platform for aflatoxins B1 (AFB1) detection and a Fe₃O₄@Au based platform for ochratoxin A (OTA) detection were fabricated. The quantification of OTA and AFB1 was respectively achieved by the release of thymolphthalein under alkaline conditions and 3,3',5,5'-tetramethylbenzidine was catalyzed by Au NPs under acidic conditions. Because of different conditions, two sensing methods didn't interfere with each other but could provide a higher detection efficiency. The detection range of AFB1 is 5-250 ng·ml^-1 and that of OTA is 0.5-80 ng·ml^-1. This biosensor has been successfully applied in real sample detection, which has a broad application prospect in fields of food safety.

A simple aptamer-based colorimetric assay for rapid detection of C-reactive protein using gold nanoparticles

C-reactive protein (CRP) is a clinical biomarker for inflammatory diseases. In this work, we present a simple and fast colorimetric method for CRP detection that employs citrate-capped gold nanoparticles (AuNPs) and a CRP-binding aptamer as sensing elements. The aptamer consisted in a guanine rich single-stranded DNA (ssDNA) that adsorbs onto the surface of the AuNPs. In the presence of the CRP, the ssDNA releases from the AuNPs surface to interact preferentially with the protein to form guanine-quadruplexes. The exposure of the unprotected AuNPs to buffer salts leads to aggregation and subsequent color change from red-wine to blue-purple that was readily seen by the naked eye. The AuNPs aggregation was monitored using UV-Vis spectroscopy and the CRP concentration in the samples could be correlated with the aggregation ratio (A_670nm/A_520nm). A linear sensing range of 0.889-20.7 μg/mL was found. The detection limit (LOD) was 1.2 μg/mL which is comparable to the typical clinical cutoff concentration in high-sensitivity CRP assays (1 μg/mL) and lower than the detection limit of nephelometric methods used in clinical practice. This method can provide a fast (5 min analysis time), simple, and sensitive way for CRP detection, with negligible interference of bovine serum albumin (BSA) up to concentrations of 100 nM.

Synthesis of hierarchical Co3O4@NiO core-shell nanotubes with a synergistic catalytic activity for peroxidase mimicking and colorimetric detection of dopamine

Fabrication of core-shell nanostructured catalyst is a promising way for tuning its catalytic performance due to the highly active interface and rich redox properties. In this work, hierarchical Co₃O₄@NiO core-shell nanotubes are fabricated by the deposition of NiO shells via a chemical bath treatment using electrospun Co-C composite nanofibers as templates, followed by a calcination process in air. The as-prepared Co₃O₄@NiO core-shell nanotubes exhibit a uniform and novel hollow structure with Co₃O₄ nanoparticles attached to the inner wall of NiO nanotubes and excellent catalytic activity toward the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H₂O₂. Due to the synergistic effect, the peroxidase-like activity of the Co₃O₄@NiO core-shell nanotubes is much higher than that of individual Co₃O₄ and NiO components. Owing to the superior peroxidase-like activity, a simple and rapid colorimetric approach for the detection of dopamine with a detection limit of 1.21µM and excellent selectivity has been developed. It is anticipated that the prepared Co₃O₄@NiO core-shell nanotubes are promising materials applied for biomedical analysis and environmental monitoring.

Colorimetric biosensors for point-of-care virus detections

Colorimetric biosensors can be used to detect a particular analyte through color changes easily by naked eyes or simple portable optical detectors for quantitative measurement. Thus, it is highly attractive for point-of-care detections of harmful viruses to prevent potential pandemic outbreak, as antiviral medication must be administered in a timely fashion. This review paper summaries existing and emerging techniques that can be employed to detect viruses through colorimetric assay design with detailed discussion of their sensing principles, performances as well as pros and cons, with an aim to provide guideline on the selection of suitable colorimetric biosensors for detecting different species of viruses. Among the colorimetric methods for virus detections, loop-mediated isothermal amplification (LAMP) method is more favourable for its faster detection, high efficiency, cheaper cost, and more reliable with high reproducible assay results. Nanoparticle-based colorimetric biosensors, on the other hand, are most suitable to be fabricated into lateral flow or lab-on-a-chip devices, and can be coupled with LAMP or portable PCR systems for highly sensitive on-site detection of viruses, which is very critical for early diagnosis of virus infections and to prevent outbreak in a swift and controlled manner.

Novel biogenic silver and gold nanoparticles for multifunctional applications: Green synthesis, catalytic and antibacterial activity, and colorimetric detection of Fe(III) ions

In this study, novel biogenic silver (AgNPs) and gold nanoparticles (AuNPs) were developed using a green approach with Ganoderma lucidum (GL) extract. The optimization of synthesis conditions for the best outcomes was conducted. The prepared materials were characterized and their applicability in catalysis, antibacterial and chemical sensing was comprehensively evaluated. The GL-AgNPs crystals were formed in a spherical shape with an average diameter of 50 nm, while GL-AuNPs exhibited multi-shaped structures with sizes ranging from 15 to 40 nm. As a catalyst, the synthesized nanoparticles showed excellent catalytic activity (>98% in 9 min) and reusability (>95% after five recycles) in converting 4-nitrophenol to 4-aminophenol. As an antimicrobial agent, GL-AuNPs were low effective in inhibiting the growth of bacteria, while GL-AgNPs expressed strong antibacterial activity against all the tested strains. The highest growth inhibition activity of GL-AgNPs was observed against B. subtilis (14.58 ± 0.35 mm), followed by B. cereus (13.8 ± 0.52 mm), P. aeruginosa (12.38 ± 0.64 mm), E. coli (11.3 ± 0.72 mm), and S. aureus (10.41 ± 0.31 mm). Besides, GL-AgNPs also demonstrated high selectivity and sensitivity in the colorimetric detection of Fe³⁺ in aqueous solution with a detection limit of 1.85 nM. Due to the suitable thickness of the protective organic layer and the appropriate particle size, GL-AgNPs validated the triple role as a high-performance catalyst, antimicrobial agent, and nanosensor for environmental monitoring and remediation.

Fully integrated and slidable paper-embedded plastic microdevice for point-of-care testing of multiple foodborne pathogens

This study presents a slidable paper-embedded plastic microdevice fully integrated with DNA extraction, loop-mediated isothermal amplification (LAMP), and colorimetric detection functionalities. The developed microdevice consists of three layers that allow a sliding movement to mix the sample and reagents for DNA purification, amplification, and detection in a sequential manner. An FTA card was employed in the main chamber for DNA extraction and purification from intact bacterial cells. Subsequently, LAMP reagents and fuchsin-stored chambers were pulled toward the main chambers for DNA amplifications at 65 °C. After 30 min, the detection reagents-stored chambers were then moved to main chambers for result analysis. For the detection of LAMP amplicons, a novel colorimetric fuchsin-based method was employed. The wide applicability of the integrated microdevice was demonstrated by successfully screening three major foodborne pathogens, namely Salmonella spp., Staphylococcus aureus, and Escherichia coli O157:H7 in food, enabling highly sensitive detection of 3.0 × 10¹ CFU/sample of Gram-negative bacteria (Salmonella spp. and Escherichia coli O157:H7) and 3.0 × 10² CFU/sample of Gram-positive bacteria (Staphylococcus aureus) within 75 min. The portable and integrated microdevice presented in this study holds significant promise for point-of-care applications to accurately and rapidly diagnose and control diseases.

A Simple and Multiplex Loop-Mediated Isothermal Amplification (LAMP) Assay for Rapid Detection of SARS-CoV

The current diagnosis of severe acute respiratory syndrome-associated coronavirus (SARS-CoV) relies on laboratory-based tests since its clinical features are nonspecific, unlike other respiratory pathogens. Therefore, the development of a rapid and simple method for on-site detection of SARS-CoV is crucial for the identification and prevention of future SARS outbreaks. In this study, a simple colorimetric and multiplex loop-mediated isothermal amplification (LAMP) assay was developed to rapid screening of severe acute respiratory syndrome-associated coronavirus (SARS-CoV). It can be visually detected based on color change and monitored in real-time with fluorescent signals. The performance of this assay, based on six primers targeting open reading frame (ORF1b) and nucleocapsid (N) genes located in different regions of the SARS-CoV, was compared with real-time RT-PCR assay using various concentrations of target genes. The detection limit of the LAMP assay was comparable to that of real-time RT-PCR assay and therefore a few target RNA to 10⁴-10⁵ copies could be detected within a short period of time (20–25 min). In addition, we established a multiplex real-time LAMP assay to simultaneously detect two target regions within the SARS-CoV genome. Two target sequences were amplified by specific primers in the same reaction tube and revealed that it was able to detect down to 10⁵ copies. The standard curve had a linear relationship with similar amplification efficiencies. The LAMP assay results in shorter “sample-to-answer” time than conventional PCR method. Therefore, it is suitable not only for diagnosis of clinical test, but also for surveillance of SARS virus in developing countries.

Multiplexed colorimetric detection of SARS-CoV-2 and other pathogens in wastewater on a 3D printed integrated microfluidic chip

Severe acute respiratory coronavirus 2 (SARS-CoV-2) pandemic has become a global public health emergency. The detection of SARS-CoV-2 and human enteric pathogens in wastewater can provide an early warning of disease outbreak. Herein, a sensitive, multiplexed, colorimetric detection (termed "SMCD") method was established for pathogen detection in wastewater samples. The SMCD method integrated on-chip nucleic acid extraction, two-stage isothermal amplification, and colorimetric detection on a 3D printed microfluidic chip. The colorimetric signal during nucleic acid amplification was recorded in real-time and analyzed by a programmed smartphone without the need for complicated equipment. By combining two-stage isothermal amplification assay into the integrated microfluidic platform, we detected SARS-CoV-2 and human enteric pathogens with sensitivities of 100 genome equivalent (GE)/mL and 500 colony-forming units (CFU)/mL, respectively, in wastewater within one hour. Additionally, we realized smart, connected, on-site detection with a reporting framework embedded in a portable detection platform, which exhibited potential for rapid spatiotemporal epidemiologic data collection regarding the environmental dynamics, transmission, and persistence of infectious diseases.

A selective distance-based paper analytical device for copper(II) determination using a porphyrin derivative

Meso-tetrakis(1,2-dimethylpyrazolium-4-yl)porphyrin sulfonate (TDMPzP), a water-soluble porphyrin derivative, was synthesized and used as a colorimetric reagent for Cu²⁺ detection on a microfluidic paper-based analytical device (µPAD) using distance-based quantification. TDMPzP showed a high selectivity for Cu²⁺ detection in aqueous solutions. When Cu²⁺ was added to the TDMPzP under acidic conditions, a color change from green to a pink was observed by the naked eye. Under optimized conditions, the application of this system to a distance-based μPAD exhibited good analytical response. The presence of common metal ions (Al³⁺, Fe³⁺, Mg²⁺, Co²⁺, Mn²⁺, Zn²⁺, Pb²⁺, Cd²⁺, Sn²⁺, and Ni²⁺) did not interfere with Cu²⁺ detection within reasonable tolerance ratios. The lowest concentration of copper that could be measured was 1mgL^-1 (1ppm) which meets the requirements for drinking water contamination regulations from the US Environmental Protection Agency (EPA) and World Health Organization (WHO) guidelines for drinking water. Real drinking water samples were analyzed to confirm the practical application of this system and the results showed good agreement with ICP-MS data. This distance-based µPAD based on TDMPzP for Cu²⁺ detection is convenient and effective for real-time drinking water analysis.

Colorimetric detection based on localised surface plasmon resonance of gold nanoparticles: Merits, inherent shortcomings and future prospects

Localised surface plasmon resonance (LSPR) of gold nanoparticles (AuNPs) has been exploited for two decades in analytical science and has proven to be a powerful tool for the detection of various kinds of substances including small molecules, ions, macro biomolecules and microbes. Detection can be performed by visual colour change observations, photometry or resonance light scattering. A wide range of applications have been studied in the areas of environmental, pharmaceutical and biological analysis and clinical diagnosis. In this article, some fundamental aspects and important applications involving LSPR of AuNPs are reviewed. Several inherent shortcomings of these techniques and possible strategies to circumvent them are discussed.

A novel aptasensor for the colorimetric detection of S. typhimurium based on gold nanoparticles

A simple, fast and convenient colorimetric aptasensor was fabricated for the detection of Salmonella typhimurium (S. typhimurium) which was based on the color change effect of gold nanoparticles (GNPs). S. typhimurium is one of the most common causes of food-associated disease. Aptamers with specific recognition toward S. typhimurium was modified to the surface of prepared GNPs. They play a role for the protection of GNPs from aggregation toward high concentrations of NaCl. With the addition of S. typhimurium, aptamers preferably combined to S. typhimurium and the protection effect was broken. With more S. typhimurium, more aptamers detached from GNPs. In such a situation, the exposed GNPs would aggregated to some extent with the addition of NaCl. The color changed from red, purple to blue which could be characterized by UV-Vis spectrophotometer. The absorbance spectra of GNPs redshifted constantly and the intensity ratio of A700/A521 changed regularly. This could be calculated for the basis of quantitative detection of S. typhimurium from 10²cfu/mL to 10⁷cfu/mL. The obtained linear correlation equation was y=0.1946x-0.2800 (R²=0.9939) with a detection limit as low as 56cfu/mL. This method is simple and rapid, results in high sensitivity and specificity, and can be used to detect actual samples.

A colorimetric paper-based analytical device coupled with hollow fiber membrane liquid phase microextraction (HF-LPME) for highly sensitive detection of hexavalent chromium in water samples

A simple and highly sensitive procedure based on the combination of hollow fiber membrane liquid phase microextraction and a microfluidic paper-based analytical device (µPAD) was developed for pre-concentration and determination of hexavalent chromium in water samples. The hexavalent chromium was pre-concentrated using the HF-LPME technique via ion exchange or a coupled transport process through a supported ionic liquid (Aliquat 336) prior to colorimetric detection with diphenylcarbazide on the µPAD. The violet colour could be seen by the naked eye. Images from the µPADs were scanned using a commercial desktop scanner at 600 dpi resolution. ImageJ software was used for quantitative analysis by measuring the intensity values at green colour channel since it gave the best sensitivity among the RGB colour. Under optimal conditions, the calibration curve was linear in the range 10-90 µg L^-1, with a limit of detection of 3 µg L^-1. The developed method was successfully applied to determine the level of hexavalent chromium spiked into natural water samples at the parts-per-billion (ppb) level, and the results were in good agreement with those obtained using inductively coupled plasma atomic emission spectroscopy (ICP-AES). The developed method was able to improve the detection limit of the conventional µPAD, and was expected to be used for the effective analysis of hexavalent chromium in natural water.