Phenotypic and genetic diversity of doubled haploid bread wheat population and molecular validation for spike characteristics, end-use quality, and biofortification capacity

Increasing grain quality and nutritional value along with yield in bread wheat is one of the leading breeding goals. Selection of genotypes with desired traits using traditional breeding selection methods is very time-consuming and often not possible due to the interaction of environmental factors. By identifying DNA markers that can be used to identify genotypes with desired alleles, high-quality and bio-fortified bread wheat production can be achieved in a short time and cost-effectively. In the present study, 134 doubled haploid (DH) wheat lines and their four parents were phenotypically evaluated for yield components (spike characteristics), quality parameters, and grain Fe and Zn concentrations in two successive growing seasons. At the same time, ten genic simple sequence repeats (SSR) markers linked to genes related to the traits examined were validated and subsequently used for molecular characterization of trait-specific candidate genotypes. Significant genotypic variations were determined for all studied traits and many genotypes with desired phenotypic values were detected. The evaluation performed with 10 SSR markers revealed significant polymorphism between genotypes. The polymorphic information content (PIC) values of 10 markers ranged from 0.00 to 0.87. Six out of 10 SSRs could be more effective in representing the genotypic differentiation of the DH population as they demonstrated the highest genetic diversity. Both Unweighted Pair Group Method with Arithmetic Mean (UPGMA) clustering and STRUCTURE analyses divided 138 wheat genotypes into five (K = 5) main groups. These analyzes were indicative of genetic variation due to hybridization and segregation in the DH population and the differentiation of the genotypes from their parents. Single marker regression analysis showed that both Xbarc61 and Xbarc146 had significant relationships with grain Fe and Zn concentrations, while Xbarc61 related to spike characteristics and Xbarc146 related to quality traits, separately. Other than these, Xgwm282 was associated with spike harvest index, SDS sedimentation value and Fe grain concentration, while Gwm445 was associated with spikelet number, grain number per spike and grain Fe concentration. These markers were validated for the studied DH population during the present study and they could be effectively used for marker-assisted selection to improve grain yield, quality, and bio-fortification capacity of bread wheat.

Genetic architecture of end-use quality traits in soft white winter wheat

Background

Genetic improvement of end-use quality is an important objective in wheat breeding programs to meet the requirements of grain markets, millers, and bakers. However, end-use quality phenotyping is expensive and laborious thus, testing is often delayed until advanced generations. To better understand the underlying genetic architecture of end-use quality traits, we investigated the phenotypic and genotypic structure of 14 end-use quality traits in 672 advanced soft white winter wheat breeding lines and cultivars adapted to the Pacific Northwest region of the United States.

Results

This collection of germplasm had continuous distributions for the 14 end-use quality traits with industrially significant differences for all traits. The breeding lines and cultivars were genotyped using genotyping-by-sequencing and 40,518 SNP markers were used for association mapping (GWAS). The GWAS identified 178 marker-trait associations (MTAs) distributed across all wheat chromosomes. A total of 40 MTAs were positioned within genomic regions of previously discovered end-use quality genes/QTL. Among the identified MTAs, 12 markers had large effects and thus could be considered in the larger scheme of selecting and fixing favorable alleles in breeding for end-use quality in soft white wheat germplasm. We also identified 15 loci (two of them with large effects) that can be used for simultaneous breeding of more than a single end-use quality trait. The results highlight the complex nature of the genetic architecture of end-use quality, and the challenges of simultaneously selecting favorable genotypes for a large number of traits. This study also illustrates that some end-use quality traits were mainly controlled by a larger number of small-effect loci and may be more amenable to alternate selection strategies such as genomic selection.

Conclusions

In conclusion, a breeder may be faced with the dilemma of balancing genotypic selection in early generation(s) versus costly phenotyping later on.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12864-022-08676-5.

Late-maturity α-amylase (LMA): exploring the underlying mechanisms and end-use quality effects in wheat

MAIN CONCLUSION

A comprehensive understanding of LMA from the underlying molecular aspects to the end-use quality effects will greatly benefit the global wheat industry and those whose livelihoods depend upon it. Late-maturity α-amylase (LMA) leads to the expression and protein accumulation of high pI α-amylases during late grain development. This α-amylase is maintained through harvest and leads to an unacceptable low falling number (FN), the wheat industry's standard measure for predicting end-use quality. Unfortunately, low FN leads to significant financial losses for growers. As a result, wheat researchers are working to understand and eliminate LMA from wheat breeding programs, with research aims that include unraveling the genetic, biochemical, and physiological mechanisms that lead to LMA expression. In addition, cereal chemists and quality scientists are working to determine if and how LMA-affected grain impacts end-use quality. This review is a comprehensive overview of studies focused on LMA and includes open questions and future directions.

Quantitative traits loci mapping and molecular marker development for total glutenin and glutenin fraction contents in wheat

BACKGROUND

Glutenin contents and compositions are crucial factors influencing the end-use quality of wheat. Although the composition of glutenin fractions is well known, there has been relatively little research on the genetic basis of glutenin fractions in wheat.

RESULTS

To elucidate the genetic basis for the contents of glutenin and its fractions, a population comprising 196 recombinant inbred lines (RILs) was constructed from two parents, Luozhen No.1 and Zhengyumai 9987, which differ regarding their total glutenin and its fraction contents (except for the By fraction). Forty-one additive Quantitative Trait Loci (QTL) were detected in four environments over two years. These QTL explained 1.3% - 53.4% of the phenotypic variation in the examined traits. Forty-three pairs of epistatic QTL (E-QTL) were detected in the RIL population across four environments. The QTL controlling the content of total glutenin and its seven fractions were detected in clusters. Seven clusters enriched with QTL for more than three traits were identified, including a QTL cluster 6AS-3, which was revealed as a novel genetic locus for glutenin and related traits. Kompetitive Allele-Specific PCR (KASP) markers developed from the main QTL cluster 1DL-2 and the previously developed KASP marker for the QTL cluster 6AS-3 were validated as significantly associated with the target traits in the RIL population and in natural varieties.

CONCLUSIONS

This study identified novel genetic loci related to glutenin and its seven fractions. Additionally, the developed KASP markers may be useful for the marker-assisted selection of varieties with high glutenin fraction content and for identifying individuals in the early developmental stages without the need for phenotyping mature plants. On the basis of the results of this study and the KASP markers described herein, breeders will be able to efficiently select wheat lines with favorable glutenin properties and develop elite lines with high glutenin subunit contents.

Effect of wheat grain protein composition on end-use quality

The quality of wheat products has been a new challenge next to wheat production which was achieved substantially during green revolution. The end-use quality of wheat is an essential factor for its commercial demand. The quality of wheat is largely based on the wheat storage proteins which extensively influences the dough properties. High molecular weight glutenin subunits (HMWGS), low molecular weight glutenin subunits (LMWGS) and gliadins significantly influence the end-use quality. Genomics and proteomics study of these gluten proteins of bread and durum wheat have explored new avenues for precise identification of the alleles and their role in end-use quality improvement. Secalin protein of Secale cereale encoded by Sec-1 loci and is associated with 1RS.1BL translocation has been known for deterioration of end-use quality. Chromosomal manipulations using various approaches have led to the development of new recombinant lines of wheat without secalin. Advanced techniques associated with assessment of end-use quality have integrated the knowledge of useful or deteriorating HMWGS/LMWGS alleles and their potential role in end-use quality. This review gives a comprehensive insight of different aspects of the end-use quality perspective for bread making in wheat along with some information on the immunological interference of gluten in celiac disease.

Co-expression of high-molecular-weight glutenin subunit 1Ax1 and Puroindoline a (Pina) genes in transgenic durum wheat (Triticum turgidum ssp. durum) improves milling and pasting quality

BACKGROUND

Durum wheat is considered not suitable for making many food products that bread wheat can. This limitation is largely due to: (i) lack of grain-hardness controlling genes (Puroindoline a and b) and consequently extremely-hard kernel; (ii) lack of high- and low-molecular-weight glutenin subunit loci (Glu-D1 and Glu-D3) that contribute to gluten strength. To improve food processing quality of durum wheat, we stacked transgenic Pina and HMW-glutenin subunit 1Ax1 in durum wheat and developed lines with medium-hard kernel texture.

RESULTS

Here, we demonstrated that co-expression of Pina + 1Ax1 in durum wheat did not affect the milling performance that was enhanced by Pina expression. While stacking of Pina + 1Ax1 led to increased flour yield, finer flour particles and decreased starch damage compared to the control lines. Interestingly, Pina and 1Ax1 co-expression showed synergistic effects on the pasting attribute peak viscosity. Moreover, Pina and 1Ax1 co-expression suggests that PINA impacts gluten aggregation via interaction with gluten protein matrix.

CONCLUSIONS

The results herein may fill the gap of grain hardness between extremely-hard durum wheat and the soft kernel durum wheat, the latter of which has been developed recently. Our results may also serve as a proof of concept that stacking Puroindolines and other genes contributing to wheat end-use quality from the A and/or D genomes could improve the above-mentioned bottleneck traits of durum wheat and help to expand its culinary uses.

Allelic variation at high-molecular weight and low-molecular weight glutenin subunit genes in Moroccan bread wheat and durum wheat cultivars

Glutenin is a major protein fraction contributing to the functional properties of gluten and dough. The glutenin constitutes 30-40% of the protein in wheat flour and about half of that in gluten. It is essential to identify correct glutenin alleles and to improve wheat quality by selecting alleles that exert favorable effects. Moroccan wheat cultivars are unique in West Asia and North Africa region, since many of them possess resistance to Hessian fly, a pest, which is becoming important in other countries in the region. Hence, these cultivars are being used as donor for the resistance in the breeding program. Here, we determine the allelic variation in high-molecular weight glutenin subunits (HMW-GS) and low-molecular weight glutenin subunits (LMW-GS) in Moroccan cultivars of bread and durum wheat using the gene-specific PCR markers. In 20 cultivars of bread wheat, 9 different allele variants were detected at HMW-GS and 13 different allele variants were detected at LMW-GS, in which the alleles Glu-A1b (2*), Glu-B1i (17 + 18), Glu-B1c (7*/7 + 9), Glu-D1d (5 + 10), Glu-A3c, Glu-B3 h, and Glu-D3b were the most frequents. In 26 cultivars of durum wheat, less allelic variation was found: seven different allele variants at HMW-GS and six different allele variants at LMW-GS were identified, in which the major alleles were Glu-A1c (null), Glu-B1b (7 + 8), Glu-B1e (20), Glu-A3c, and Glu-B3d. The mean value of the genetic diversity for the glutenin loci was 0.502 in bread wheat and 0.449 in durum wheat. Most of the glutenin alleles carried by Moroccan bread wheat cultivars impart good bread-making quality. Most of the durum wheat glutenin alleles were related to low strength dough or poor quality and need to be improved. To improve quality of Moroccan durum wheat, essentially, Glu-A1c and Glu-B3d alleles of the genes should be replaced with the better alleles through breeding.

Overview of the Wheat Genetic Transformation and Breeding Status in China

In the past two decades, Chinese scientists have achieved significant progress on three aspects of wheat genetic transformation. First, the wheat transformation platform has been established and optimized to improve the transformation efficiency, shorten the time required from starting of transformation procedure to the fertile transgenic wheat plants obtained as well as to overcome the problem of genotype-dependent for wheat genetic transformation in wide range of wheat elite varieties. Second, with the help of many emerging techniques such as CRISPR/cas9 function of over 100 wheat genes has been investigated. Finally, modern technology has been combined with the traditional breeding technique such as crossing to accelerate the application of wheat transformation. Overall, the wheat end-use quality and the characteristics of wheat stress tolerance have been improved by wheat genetic engineering technique. So far, wheat transgenic lines integrated with quality-improved genes and stress tolerant genes have been on the way of Production Test stage in the field. The debates and the future studies on wheat transformation have been discussed, and the brief summary of Chinese wheat breeding research history has also been provided in this review.