Mechanisms of metal sorption by biochars: Biochar characteristics and modifications

Biochar produced by thermal decomposition of biomass under oxygen-limited conditions has received increasing attention as a cost-effective sorbent to treat metal-contaminated waters. However, there is a lack of information on the roles of different sorption mechanisms for different metals and recent development of biochar modification to enhance metal sorption capacity, which is critical for biochar field application. This review summarizes the characteristics of biochar (e.g., surface area, porosity, pH, surface charge, functional groups, and mineral components) and main mechanisms governing sorption of As, Cr, Cd, Pb, and Hg by biochar. Biochar properties vary considerably with feedstock material and pyrolysis temperature, with high temperature producing biochars with higher surface area, porosity, pH, and mineral contents, but less functional groups. Different mechanisms dominate sorption of As (complexation and electrostatic interactions), Cr (electrostatic interactions, reduction, and complexation), Cd and Pb (complexation, cation exchange, and precipitation), and Hg (complexation and reduction). Besides sorption mechanisms, recent advance in modifying biochar by loading with minerals, reductants, organic functional groups, and nanoparticles, and activation with alkali solution to enhance metal sorption capacity is discussed. Future research needs for field application of biochar include competitive sorption mechanisms of co-existing metals, biochar reuse, and cost reduction of biochar production.

Relationships of leaf dark respiration to leaf nitrogen, specific leaf area and leaf life-span: a test across biomes and functional groups

Based on prior evidence of coordinated multiple leaf trait scaling, we hypothesized that variation among species in leaf dark respiration rate (R _d) should scale with variation in traits such as leaf nitrogen (N), leaf life-span, specific leaf area (SLA), and net photosynthetic capacity (A _max). However, it is not known whether such scaling, if it exists, is similar among disparate biomes and plant functional types. We tested this idea by examining the interspecific relationships between R _d measured at a standard temperature and leaf life-span, N, SLA and A _max for 69 species from four functional groups (forbs, broad-leafed trees and shrubs, and needle-leafed conifers) in six biomes traversing the Americas: alpine tundra/subalpine forest, Colorado; cold temperate forest/grassland, Wisconsin; cool temperate forest, North Carolina; desert/shrubland, New Mexico; subtropical forest, South Carolina; and tropical rain forest, Amazonas, Venezuela. Area-based R _d was positively related to area-based leaf N within functional groups and for all species pooled, but not when comparing among species within any site. At all sites, mass-based R _d (R _d-mass) decreased sharply with increasing leaf life-span and was positively related to SLA and mass-based A _max and leaf N (leaf N _mass). These intra-biome relationships were similar in shape and slope among sites, where in each case we compared species belonging to different plant functional groups. Significant R _d-mass-N _mass relationships were observed in all functional groups (pooled across sites), but the relationships differed, with higher R _d at any given leaf N in functional groups (such as forbs) with higher SLA and shorter leaf life-span. Regardless of biome or functional group, R _d-mass was well predicted by all combinations of leaf life-span, N _mass and/or SLA (r ²≥ 0.79, P < 0.0001). At any given SLA, R _d-mass rises with increasing N _mass and/or decreasing leaf life-span; and at any level of N _mass, R _d-mass rises with increasing SLA and/or decreasing leaf life-span. The relationships between R _d and leaf traits observed in this study support the idea of a global set of predictable interrelationships between key leaf morphological, chemical and metabolic traits.

Applications of biochar in redox-mediated reactions

Biochar is chemically more reduced and reactive than the original feedstock biomass. Graphite regions, functional groups, and redox-active metals in biochar contribute to its redox characteristics. While the functional groups such as phenolic species in biochar are the main electron donating moieties (i.e., reducers), the quinones and polycondensed aromatic functional groups are the components accepting electrons (oxidants). The redox capacity of biochar depends on feedstock properties and pyrolysis conditions. This paper aims to review and summarize the various synthesis techniques for biochars and the methods for probing their redox characteristics. We review the abiotic and microbial applications of biochars as electron donors, electron acceptors, or electron shuttles for pollutant degradation, metal(loid)s (im)mobilization, nutrient transformation, and discuss the underlying mechanisms. Furthermore, knowledge gaps that exist in the exploration and differentiation of the electron transfer mechanisms involving biochars are also identified.

Widespread microplastic ingestion by fish assemblages in tropical estuaries subjected to anthropogenic pressures

Our aim was to quantify microplastic ingestion by fish assemblages in two tropical Brazilian estuaries and to evaluate whether biological and ecological factors influence the ingestion of microplastics by fish species. Of 2233 fish from both estuaries (from 69 species) examined in this study, 9% of the individuals (24 species) had microplastics in their gut contents. Microplastic ingestion occurred irrespective of fish size and functional group. The diet of fish species was analyzed based on prey items identified in the fish's full stomach contents and five feeding guilds were defined. Microplastics were common throughout all feeding guilds. Low (average ingestion values 1.06±0.30 items/total fish) but widespread occurrence among estuaries also indicates proliferation of microplastic pollution. Our findings highlight the need to focus on assemblage level studies to understand the real magnitude of the problem and emphasize the urgency of mitigation measures directed at microplastic pollution in estuarine ecosystems.

Pyrolytic temperatures impact lead sorption mechanisms by bagasse biochars

The characteristics and mechanisms of Pb sorption by biochars produced from sugarcane bagasse at 250, 400, 500, and 600 °C were examined. The Pb sorption isotherms, kinetics and desorption were investigated. All biochars were effective in Pb sorption and were well described by Langmuir isotherm model and pseudo-second-order kinetic model. The maximum sorption capacity decreased from 21 to 6.1 mg g(-1) as temperature increased from 250 to 600 °C. The Pb sorption was rapid initially, probably controlled by cation exchange and complexation and then slowed down, which might be due to intraparticle diffusions. FTIR data and kinetic models suggested that oxygen functional groups were probably responsible for the high Pb sorption onto low temperature biochars (250 and 400 °C) whereas intraparticle diffusion was mainly responsible for low Pb sorption onto high temperature biochars (500 and 600 °C). Decreased phosphorus concentration indicated that P-induced Pb precipitation was also responsible for Pb sorption. Pyrolysis temperature significantly affected biochar properties and played an important role in Pb sorption capacity and mechanisms by biochars.

Insights into the mechanism of nonradical reactions of persulfate activated by carbon nanotubes: Activation performance and structure-function relationship

This study aimed to elucidate the intrinsic mechanisms of PS activation by carbon nanotubes (CNTs). Singlet oxygen generation (¹O₂) and direct CNTs-mediated electron transfer were hypothesized to be two major pathways of the oxidation of 2,4-dichlorophenol (2,4-DCP) by PS in the presence of both unmodified and modified CNTs. For the first time, roles of CNT active sites responsible for PS activation were determined using CNT derivatization and structural characterization. By selectively deactivating the carbonyl, hydroxyl or carboxylic groups on CNTs surface and linear sweep voltammetry (LSV) analysis, CO groups were determined to be the main active sites contributing to the direct electron transfer oxidation, while singlet oxygen was generated at CNTs defects. Subsequent UV irradiation was shown to cause the recovery of surface defects with I_D/I_G of CNTs increasing by 21%. This resulted in the regeneration of the performance for the coupled system and allowed for multi-cycle activation of PS by CNTs. These results suggest that CNTs/PS system combined with regeneration based on UV irradiation can be used as an effective alternative process for continuous degradation of recalcitrant aqueous contaminants through the non-radical mechanism.

Characterization and quantification of biochar alkalinity

Lack of knowledge regarding the nature of biochar alkalis has hindered understanding of pH-sensitive biochar-soil interactions. Here we investigate the nature of biochar alkalinity and present a cohesive suite of methods for its quantification. Biochars produced from cellulose, corn stover and wood feedstocks had significant low-pK_a organic structural (0.03-0.34 meq g^-1), other organic (0-0.92 meq g^-1), carbonate (0.02-1.5 meq g^-1), and other inorganic (0-0.26 meq g^-1) alkalinities. All four categories of biochar alkalinity contributed to total biochar alkalinity and are therefore relevant to pH-sensitive soil processes. Total biochar alkalinity was strongly correlated with base cation concentration, but biochar alkalinity was not a simple function of elemental composition, soluble ash, fixed carbon, or volatile matter content. More research is needed to characterize soluble biochar alkalis other than carbonates and to establish predictive relationships among biochar production parameters and the composition of biochar alkalis.

The degradation performance of different microplastics and their effect on microbial community during composting process

The objectives of this study were to investigate the degradation characteristics of different microplastics (polyethylene (PE), polyvinyl chloride (PVC), polyhydroxyalkanoates (PHA)) and their effect on the bacterial community during composting. In this study, 0.5% PE, 0.5% PVC and 0.5% PHA microplastics were individually added to the mixture of cow manure and sawdust and then composted for 60 days. The treatment without microplastics was regarded as control. Results indicated that the abundance and smaller size (0-800 μm) of microplastics in all treatments obviously decreased after composting, except PVC treatment. The surface morphology of all microplastics occurred obvious erosions and cracks and the carbon content of PE, PVC and PHA microplastics were reduced by 30, 17 and 30%, respectively. After composting, all microplastics were significantly oxidized and the functional groups O-H, C=O and C-O increased. Furthermore, all microplastics exposure reduced the richness and diversity of bacteria community at thermophilic phase, especially PVC microplastics.

Equilibrium and kinetic mechanisms of woody biochar on aqueous glyphosate removal

We investigated the removal of aqueous glyphosate using woody (dendro) biochar obtained as a waste by product from bioenergy industry. Equilibrium isotherms and kinetics data were obtained by adsorption experiments. Glyphosate adsorption was strongly pH dependent occurring maximum in the pH range of 5-6. The protonated amino moiety of the glyphosate molecule at this pH may interact with π electron rich biochar surface via π-π electron donor-acceptor interactions. Isotherm data were best fitted to the Freundlich and Temkin models indicating multilayer sorption of glyphosate. The maximum adsorption capacity of dendro biochar for glyphosate was determined by the isotherm modeling to be as 44 mg/g. Adsorption seemed to be quite fast, reaching the equilibrium <1 h. Pseudo-second order model was found to be the most effective in describing kinetics whereas the rate limiting step possibly be chemical adsorption involving valence forces through sharing or exchanging electrons between the adsorbent and sorbate. The FTIR spectral analysis indicated the involvement of functional groups such as phenolic, amine, carboxylic and phosphate in adsorption. Hence, a heterogeneous chemisorption process between adsorbate molecules and functional groups on biochar surface can be suggested as the mechanisms involved in glyphosate removal.

Investigating the toxicities of different functionalized polystyrene nanoplastics on Daphnia magna

Nanoplastics (NPs) spread widely with water and air current, and they can accumulate in aquatic organisms, even penetrating biofilms, which may cause persistent toxicity and potential hazards. This current study aimed to reveal the toxicological mechanism of different functionalized polystyrene (PS) NPs on Daphnia magna (D. magna) by investigating toxicity endpoints in individual level and biochemical level. In this study, acute toxicity, behavioral parameters and biomarker responses of D. magna was measured in the exposure of different functionalized PS NPs (plain PS, PS-p-NH₂, PS-n-NH₂ and PS-COOH). The results indicated that when exposed to the plain PS, ROS induction would activate MAPKs, thereby causing lethality and adverse behavior effects on D. magna; while the functionalized PS NPs were less toxic than the plain PS, especially for PS-p-NH₂ which was severely flocculated after exposure, thus showing no immobilization at the investigated concentrations. Also, the antioxidant system was mainly stimulated due to the direct interaction with the cell surface receptor, which was different from the plain PS. Consequently, this work suggests significant effects of functional groups on NPs for environmental toxicity studies, and provides a better understanding of the toxicological mechanism on the toxicity of PS NPs toward D. magna.

Heavy metal removal by biomass-derived carbon nanotubes as a greener environmental remediation: A comprehensive review

The concentrations of heavy metal ions found in waterways near industrial zones are often exceed the prescribed limits, posing a continued danger to the environment and public health. Therefore, greater attention has been devoted into finding the efficient solutions for adsorbing heavy metal ions. This review paper focuses on the synthesis of carbon nanotubes (CNTs) from biomass and their application in the removal of heavy metals from aqueous solutions. Techniques to produce CNTs, benefits of modification with various functional groups to enhance sorption uptake, effects of operating parameters, and adsorption mechanisms are reviewed. Adsorption occurs via physical adsorption, electrostatic interaction, surface complexation, and interaction between functional groups and heavy metal ions. Moreover, factors such as pH level, CNTs dosage, duration, temperature, ionic strength, and surface property of adsorbents have been identified as the common factors influencing the adsorption of heavy metals. The oxygenated functional groups initially present on the surface of the modified CNTs are responsible towards the adsorption enhancement of commonly-encountered heavy metals such as Pb²⁺, Cu²⁺, Cd²⁺, Co²⁺, Zn²⁺, Ni²⁺, Hg²⁺, and Cr⁶⁺. Despite the recent advances in the application of CNTs in environmental clean-up and pollution treatment have been demonstrated, major obstacles of CNTs such as high synthesis cost, the agglomeration in the post-treated solutions and the secondary pollution from chemicals in the surface modification, should be critically addressed in the future studies for successful large-scale applications of CNTs.

Development of a predictive framework to assess the removal of trace organic chemicals by anaerobic membrane bioreactor

This study aims to develop a predictive framework to assess the removal and fate of trace organic chemicals (TrOCs) during wastewater treatment by anaerobic membrane bioreactor (AnMBR). The fate of 27 TrOCs in both the liquid and sludge phases during AnMBR treatment was systematically investigated. The results demonstrate a relationship between hydrophobicity and specific molecular features of TrOCs and their removal efficiency. These molecular features include the presence of electron withdrawing groups (EWGs) or donating groups (EDGs), especially those containing nitrogen and sulphur. All seven hydrophobic contaminants were well removed (>70%) by AnMBR treatment. Most hydrophilic TrOCs containing EDGs were also well removed (>70%). In contrast, hydrophilic TrOCs containing EWGs were mostly poorly removed and could accumulate in the sludge phase. The removal of several nitrogen/sulphur bearing TrOCs (e.g., linuron and caffeine) by AnMBR was higher than that by aerobic treatment, possibly due to nitrogen or sulphur reducing bacteria.

Adsorptive removal of hazardous organics from water and fuel with functionalized metal-organic frameworks: Contribution of functional groups

The purification of contaminated water and fuel is very important for our sustainability. Adsorptive removal has attracted significant attention because of possible applications in industry and the rapid development of metal-organic frameworks (MOFs), which can be competitive adsorbents. In this review, the possible/competitive purification of water (contaminated with organics) and fuel (composed of S- and N-Containing compounds) via adsorption using MOFs, especially those with various functional groups (FGs), will be discussed. The contribution of FGs such as -OH, -COOH, -SO₃H, -NH₂, and -NH₃⁺ to adsorption/purification will be analyzed in detail, not only to understand the plausible adsorption mechanism but also to utilize specific FGs in adsorption. Moreover, methods for introducing FGs onto MOFs will be summarized. Finally, the prospects for both adsorption/removal and emerging fields will be suggested. Studies for practical applications in industry with shaped MOFs from inexpensive route will be important. The solution pH should be considered for the adsorption of aqueous solution. Applications of MOFs in other fields like storage/delivery and enrichment of analytes might be deeply studied.

The contribution of oxygen-containing functional groups to the gas-phase adsorption of volatile organic compounds with different polarities onto lignin-derived activated carbon fibers

Lignin-based activated carbon fibers (LCFK) were prepared by electrospinning method and evaluated in adsorption of volatile organic compounds (VOCs). Batch adsorption experiments for various component were carried out in a fixed-bed reactor. The molecular polarity of VOCs plays a pivotal role in the monocomponent dynamic adsorption. As a result, the adsorption capacity of toluene was larger than that of methanol or acetone. In the various multicomponent atmospheres (without water), the components interact with each other and competitive adsorption phenomenon occurs, resulting in the adsorption capacity of each component decreased significantly. Also, the samples before and after adsorption were characterized via Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), and Boehm titration. The results reveal that methanol and acetone, controlled by physical adsorption, prefer to be adsorbed on polar groups on the surface of LCFK through the dipole-dipole interactions (i.e., van der Waals' forces). Differently, the adsorption of toluene onto LCFK was controlled by physical and chemical processes, and the lactone groups have a positive contribution to the adsorption of toluene. It was also observed that water vapor can enhance the negative effect on the adsorption of VOCs, especially for toluene. The results from this study will be valuable for explaining the mechanisms of competitive adsorption among each component in the various multicomponent atmospheres and understanding the contribution of chemical functional groups on the surface of LCFK in the adsorption process.

Production and functionality of exopolysaccharides in bacteria exposed to a toxic metal environment

In this study, the production and compositional analysis of exopolysaccharides produced by Bacillus cereus KMS3-1 grown in metal amended conditions were investigated. In addition, the metal adsorption efficacy of exopolysaccharides (EPS) produced by KMS3-1 strain was evaluated in a batch mode. Increased production of exopolysaccharides by KMS3-1 strain was observed while growing under metal amended conditions (100 mg/L) and also, the yield was in the order of Pb(II)>Cu(II)>Cd(II)>Control. Characterization of EPS using FT-IR, XRD, and SEM analysis revealed that the EPS can interact with metal ions through their functional groups (O‒H, CH, C˭O, C‒O, and C‒C˭O) and assist the detoxification process. Further, equilibrium results were fitted with the Langmuir model and notably, the maximum adsorption capacity (Q_max) of EPS for Cd(II), Cu(II), and Pb(II) found to be 54.05, 71.42, and 78.74 mg/g, respectively. To the best of our knowledge, EPS demonstrating proficient metal adsorption was substantiated by XRD analysis in this study. Owing to good adsorbing nature, the exopolysaccharides could be used as chelating substances for wastewater treatment.

Effects of organic matter fraction and compositional changes on distribution of cadmium and zinc in long-term polluted paddy soils

Soil particulate organic matter (POM) has rapid turnover and metal enrichment, but the interactions between organic matter (OM) and metals have not been well studied. The present study aimed to investigate changes in the OM concentration and composition of the POM fraction and their corresponding effects on metal distribution and extractability in long-term polluted paddy soils. Soil 2000-53 μm POM size fractions had higher contents of C-H and C=O bonds, C-H/C=O ratios and concentrations of fulvic acid (FA), humic acid (HA), cadmium (Cd) and zinc (Zn) than the bulk soils. Cadmium and Zn stocks in soil POM fractions were 24.5-27.9% and 7.12-16.7%, respectively, and were more readily EDTA-extractable. Compared with the control soil, the 2000-250 μm POM size fractions had higher organic carbon concentrations and C/N ratios in the polluted soils. However, there were no significant differences in the contents in C-H and C=O bonds or C-H/C=O ratios of POM fractions among the control, slightly and highly polluted soils. In accordance with the lower contents of C=O bonds and FA and HA concentrations, the Cd and Zn concentrations in 250-53 μm POM size fractions were lower than those in 2000-250 μm POM size fractions. Enrichment of Cd in POM fractions increased with increasing soil pollution level. These results support the view that changes in the OM concentration and the size and composition of POM fractions play a key role in determining the distribution of Cd and Zn in paddy soils.

The role of different functional groups in a novel adsorption-complexation-reduction multi-step kinetic model for hexavalent chromium retention by undissolved humic acid

Undissolved humic acid (HA) has a great retention effect on the migration of hexavalent chromium [Cr(VI)] in soil, and HA functional groups play a predominant role in this process. However, the coupled mode between Cr(VI) retention and HA functional groups reaction is still unclear. In this study, it was found that a fair amount of Cr on HA existed in the forms of ion exchangeable and binding Cr(VI) during the reaction resulting from the ion exchange adsorption and complexation of Cr(VI). According to the results of two-dimensional correlation spectroscopic analysis (2DCOS), HA functional groups participated in the reaction with Cr(VI) in the order of carboxyl ≈ chelated carboxyl > phenol > polysaccharide > methyl, and all the functional groups were more likely to be located at aromatic domains. Based on the results of XPS spectra, rather than to be oxidized by Cr(VI), carboxyl more tended to be complexed by chromium, which is regarded as the precondition for Cr(VI) reduction. Phenol, polysaccharide and methyl with distinct reaction activities successively acted as major electron donors for Cr(VI) reduction in different reaction stages. Consequently, it was determined that the retention of Cr(VI) by undissolved HA followed an adsorption-complexation-reduction mechanism, and based on this, a multi-step kinetic model with multiple types of complexation/reduction sites was developed to simulate the retention processes resulting in a much better fitting effect (R² > 0.99) compared with traditional first-order and second-order kinetic models (R² < 0.95). This demonstrated that the multi-step kinetic model is of great potential in accurately simulating the migration and transformation of Cr(VI) in soil environment.

Assessing the effect of pyrolysis temperature on the molecular properties and copper sorption capacity of a halophyte biochar

The capacity of biochar to take up heavy metals from contaminated soil and water is influenced by the pyrolysis temperature. We have prepared three biochar samples from Jerusalem artichoke stalks (JAS) by pyrolysis at 300, 500 and 700 °C, denoted as JAS300, JAS500, and JAS700, respectively. A variety of synchrotron-based techniques were used to assess the effect of pyrolysis temperature on the molecular properties and copper (Cu) sorption capacity of the samples. The content of oxygen-containing functional groups in the biochar samples decreased, while that of aromatic structures and alkaline mineral components increased, with a rise in pyrolysis temperature. Scanning transmission X-ray microscopy indicated that sorbed Cu(II) was partially reduced to Cu(I), but this process was more evident with JAS300 and JAS700 than with JAS500. Carbon K-edge X-ray absorption near edge structure spectroscopy indicated that Cu(II) cations were sorbed to biochar via complexation and Cu-π bonding. With rising pyrolysis temperature, Cu(II)-complexation weakened while Cu-π bonding was enhanced. In addition, the relatively high ash content and pH of JAS500 and JAS700 facilitated Cu precipitation and the formation of langite on the surface of biochar. The results of this investigation will aid the conversion of halophyte waste to useable biochar for the effective remediation of Cu-contaminated soil and water.

New insights into the effect of sludge proteins on the hydrophilic/hydrophobic properties that improve sludge dewaterability during anaerobic digestion

Extracellular polymer proteins have been reported to play an important role in enhancing sludge dewaterability during anaerobic digestion in our previous study. However, how the proteins in sludge determine sludge dewaterability remains to be determined. In this work, proteins from digested sludge were identified using label free proteomics analysis, and its hydrophilicity/hydrophobicity properties and functional groups were analysed. We determined that the microbial community variation between the three stages during the anaerobic digestion process was responsible for enhancing sludge dewaterability; The transformation from hydrophilicity to hydrophobicity of digested sludge surface is the result of functional groups distribution variation which caused by the proteins and microbial communities. This study provides a new insight into the development of anaerobic digestion based on sludge dewaterability.

Adsorption mechanisms of hexavalent chromium from aqueous solutions on modified activated carbons

Functional groups of the activated carbon play the major role in metals removal from aqueous solutions and, for this reason, different treatments can be used to modify the adsorbent surface improving the adsorption capacity for a particular pollutant. In this research, oxidation with nitric acid, heating under an inert atmosphere, and ammonia treatment were applied to modify the activated carbon surface. The modified adsorbents were used for the removal of hexavalent chromium (Cr(VI)) from aqueous solutions at different concentrations (10-500 mg L^-1), pH 6, and 25 °C. Adsorption mechanisms of Cr(VI) on the activated carbon were proposed based on the surface chemistry, adsorption/reduction, and desorption experiments. Findings demonstrate that acid functional groups of the activated carbon had an important effect on the hexavalent chromium removal. For instance, a high reduction of Cr(VI) to Cr(III) (50%) was obtained by the oxidized adsorbents, whereas the heat treated adsorbents achieved a low reduction (35%), but the ammonia-treated activated carbon achieved the lowest reduction (20%). The heat-treated adsorbent showed the best Cr(VI) adsorption capacity (48 mg g^-1), especially at equilibrium Cr(VI) concentration lower than 200 mg L^-1, and the fastest adsorption kinetics among the studied adsorbents. Furthermore, the highest Cr(VI) desorption (90%) was achieved with 0.1 N NaOH-NaCl solutions. In summary, an anionic/reduction coupled adsorption mechanism of Cr(VI) seems to be feasible, and the heat-treated activated carbon is an interesting option for sequestering Cr(VI) species from aqueous effluents.

Comparison on structural modification of industrial lignin by wet ball milling and ionic liquid pretreatment

•

Two pretreatment methods were investigated to improve the quality of industrial lignin.

•

ILP significantly reduced the average molecular weight and polydispersity of lignin.

•

The methoxy group of lignin showed obviously decrease after ionic liquid pretreatment.

•

ILP with [Emim][OAc] is an effective way to enhance the quality of industrial lignin.

As the most abundant aromatic compounds, lignin is still underutilized due to its relatively low quality. In order to improve its quality, two pretreatment technologies, wet ball milling (WBM) and ionic liquid pretreatment (ILP) were tested on the industrial lignin and evaluated on the average molecular weight and polydispersity, surface morphology, and functional groups changes. The results showed that the lignin pretreated by the WBM with phosphoric acid presented dramatic decrease of polydipersity (23%) and increase of phenolic hydroxyl content (9%). While, the ILP treated samples exhibited the significant reduction of the average molecular weight and polydispersity. The decrease on the particle size and the emergence of the porous structure were found when treated with [Emim][OAc]. In addition, the remarkable reduction of the methoxy groups were observed to be 50% and 45% after treated with [Bmim]Cl and [Emim][OAc], respectively.

The predominant role of pectin in binding Cd in the root cell wall of a high Cd accumulating rice line (Oryza sativa L.)

Cell wall (CW) plays an important role in Cd accumulation in roots of metal-tolerant plants, including rice. The role of CW polysaccharides, especially pectin, in binding Cd in roots of a high Cd accumulating (HA) rice line of Lu527-8 and a non-high Cd accumulating (NHA) rice line of Lu527-4 was investigated in this study. About 59%-63% of Cd in roots of the two rice lines was bound to CWs, indicating that CW was the main site for Cd accumulation in roots of the two rice lines. Cd adsorbed on the root CWs of the HA was 1.1-1.2 times more than that of the NHA, demonstrating the root CWs of the HA showed greater Cd binding ability. Cd exposure induced more Cd accumulation in pectin and hemicellulose in the HA. In particular, up to 65% of Cd accumulation in root CWs of the HA was observed in pectin. The removal of pectin lead to a 50% decrease for the amounts of Cd adsorption on root CWs of the HA, indicating that pectin was the major binding site for Cd in root CWs of the HA. The HA showed greater pectin methylesterase activities, resulting in lower degree of pectin methylesterification along with more low-methylesterified pectins in root CWs than the NHA. The more accumulation of low-methylesterified pectins in CWs induced by Cd contributed greatly to the high Cd accumulation in roots of the HA rice line of Lu527-8.

Production of biochar from olive mill solid waste for heavy metal removal

Commercial activated carbon (CAC) and biochar are useful adsorbents for removing heavy metals (HM) from water, but their production is costly. Biochar production from olive solid waste from two olive cultivars (Picual and Souri) and two oil production process (two- or three-phase) and two temperatures (350 and 450°C) was tested. The biochar yield was 24-35% of the biomass, with a surface area of 1.65-8.12m²g^-1, as compared to 1100m²g^-1 for CAC. Picual residue from the two-phase milling technique, pyrolysed at 350°C, had the best cumulative removal capacity for Cu⁺², Pb⁺², Cd⁺², Ni⁺² and Zn⁺² with more than 85% compared to other biochar types and CAC. These results suggest that surface area cannot be used as a sole predictor of HM removal capacity. FTIR analysis revealed the presence of different functional groups in the different biochar types, which may be related to the differences in absorbing capacities.

Adsorption mechanism of polycyclic aromatic hydrocarbons using wood waste-derived biochar

The polycyclic aromatic hydrocarbons (PAHs) have been attracted increasing attentions due to their carcinogenicity and teratogenicity. Adsorption is widely considered one of the most potential technologies for PAHs removal. In this study, we prepared two kinds of oxygen-rich biochar derived from waste wood to investigate the PAHs adsorption performance, and the molecular simulation was used to build the 16 priority PAHs, 23 nitrated PAHs, 9 oxygenated PAHs adsorption model. The surface adsorption performance of oxygen-rich biochar significantly depends on the pyrolysis conditions. The main out-comings demonstrated that the adsorption of naphthalene (C₁₀H₈) molecules first occurred, and the optimal adsorption positions of oxygen-rich biochar strongly adhered to functional groups of carboxyl and hydroxyl. Moreover, benzene ring, -COOH, and -CH₃ of biochar were the main adsorbed functional groups for PAHs adsorption. The oxygen-rich biochar had the targeted-adsorption effect on PAHs removal especially symmetrical PAHs, and the targeted-adsorption mechanism was finally proposed. The research is beneficial to guide the removal of PAHs from polluted water and mitigate the environmental pollution caused by biomass waste mismanagement, simultaneously.

The combined effects of Cd and Pb enhanced metal binding by root cell walls of the phytostabilizer Athyrium wardii (Hook.)

Cell wall acts as a major metal sink in plant roots, while a few studies focused on root cell wall binding in plants for the phytostabilization of multi-metal contaminated soils. A pot experiment was performed to characterize root cell wall properties of the mining ecotype (ME) and non-mining ecotype (NME) of Athyrium wardii (Hook.) in response to Cd and Pb. The cell wall was found to be the major sink for Cd (41.3-54.3%) and Pb (71.4-73.8%) accumulation in roots of the ME when exposed to Cd and/or Pb. The ME showed more Cd and Pb accumulation in root cell walls when exposed to Cd and Pb simultaneously, compared with those exposed to single Cd or Pb as well as the NME, suggesting some modifications for cell walls. The uronic acid contents of pectin and hemicellulose 1 (HC1) in root cell walls of the ME increased significantly when exposed to Cd and Pb simultaneously, suggesting enhanced cell wall binding capacity, thus resulting in more Cd and Pb bound to pectin and HC1. In particular, pectin was found to be the predominant binding site for Cd and Pb. Greater pectin methylesterase activity along with a lower degree of methylesterification were observed in the cell walls of the ME when exposed to Cd and Pb simultaneously. Furthermore, the ME present more O-H, N-H, C-OH, C-O-C, C-C and/or Ar-H in root cell walls when exposed to Cd and Pb simultaneously. These changes of root cell wall properties of the ME lead to enhanced cell wall binding ability in response to the co-contamination of Cd and Pb, thus could be considered a key process for enhanced Cd and Pb accumulation in roots of the ME when exposed to Cd and Pb simultaneously.