PEEK and glass fiber post pushout bond strength and vickers hardness of canal disinfected with curcumin photosensitizer activated by microbubble emulsion and sodium-hypochlorite with EDTA

AIMS

Impact of different post-space disinfectants (Saline, Sodium hypochlorite (NaOCl) followed by ethylene-diamine-tetra-acetic acid (EDTA) and curcumin activated by microbubble emulsion (MBE) on the Vickers hardness (VH) of root canal dentin and extrusion bond strength (EBS) of Glass fiber post (GFP) and PEEK post.

METHODS

Ninety maxillary central incisors having fully formed roots were included. After the specimen's disinfection, root canal treatment was completed. Post space was prepared by removing gutta-percha using gates glidden drills. Teeth were then arbitrarily allocated into three groups based on the methods of disinfection regime used. Group 1: Saline, Group 2: NaOCl+ EDTA and Group 3: Curcumin activated by MBE (n = 30). Analysis of VH of radicular dentin was performed using a micro-Vickers tester on ten samples from each group. After post-space disinfection, twenty specimens from each group were further divided into two subgroups (n = 10) In group-1A 2A, and 3A, GFP was used. Whereas, prefabricated PEEK posts were used in 1B, 2B, and 3B subgroups. The PBS and failure modes were performed using a universal testing machine and stereomicroscope respectively. Data was analyzed using ANOVA and Tukey post hoc test to identify significant variations among groups concerning the MH and EBS of the different posts used (p = 0.05).

RESULTS

Group 2 (5.25 % NaOCl + 17 % EDTA) (0.15 ± 0.02 GPa) treated specimens presented lowest scores of VH. However, Group 1 (Saline) irrigated canals displayed the highest scores of surface hardness (0.25 ± 0.07 GPa). Additionally, a cervical third of 3A (CP activated by MBE + GFP) (11.22 ± 0.79 MPa) presented the highest scores of bond integrity. Whereas Group 1B (Saline + PEEK post) treated specimens presented the lowest scores of PBS (4.15 ± 0.15 MPa).

CONCLUSION

Curcumin activated by microbubble emulsion for disinfection of canal dentin demonstrated favorable VH. Similarly, glass fiber post-cemented in radicular walls disinfected with curcumin activated with MBE showed promising post-bond integrity to the canal dentin.

Clinical Performance of Composite Resin Restorations of Primary Incisors with Extensive Carious Lesions Retained by Glass Fiber Post or Biological Post

AIM

Intracanal posts enhance the resistance of the restoration to mechanical loads and masticatory forces in primary teeth with extensive carious breakdown. This study was done to investigate the clinical performance of composite resin restoration retained by either glass fiber post or biological post in the restoration of primary anterior teeth with extensive carious lesions.

MATERIALS AND METHODS

A total of 21 children (with 82 primary anterior teeth) who met the inclusion criteria were involved in the study. The 82 primary maxillary incisors were randomly allocated into two equal groups: groups I (glass fiber post) and II (biological post). All the teeth underwent pulpectomy, followed by glass fiber post or biological post, followed by celluloid strip crown restoration. Clinical analysis of all the teeth in the two groups was performed at 1, 3, 6, 9, and 12 months to assess the success of treatment procedures. Statistical Package for the Social Sciences (SPSS) software version "17" was used for statistical analysis. Pearson's Chi-squared test and Fisher's exact test were utilized to evaluate the success of both treatment procedures. The significance level was predetermined at p < 0.05.

RESULTS

At the end of the 12-month follow-up period, 89.4 and 84.2% of composite resin restorations of primary incisors with extensive carious lesions were retained by glass fiber and biological posts, respectively. The intergroup comparison revealed no statistically significant differences pertaining to retention loss, marginal discoloration, and marginal adaptation at all follow-up intervals (p > 0.05).

CONCLUSION AND CLINICAL SIGNIFICANCE

Since biological posts are inexpensive and economical, they may replace the commercial post systems available to pediatric dentists.

HOW TO CITE THIS ARTICLE

Jaiswal N, Garg N, Pathivada L, et al. Clinical Performance of Composite Resin Restorations of Primary Incisors with Extensive Carious Lesions Retained by Glass Fiber Post or Biological Post. Int J Clin Pediatr Dent 2023;16(6):850-857.

The adhesive strength of fiber post-to-canal dentin with Aniline green, Fotoenticine activated by PDT, green tea, and ozone as a final irrigant

AIM

The effect of novel final disinfection protocols Malachite green (MG), Fotoenticine® (FTC), Green tea extract (GTE), and Ozonated water (OW) on the bond strength of prefabricated glass fiber posts (PGFP) adhered to canal dentin.

MATERIAL AND METHOD

The canals of fifty premolars with closed apices were cleansed and obturated. The specimens were randomly assigned to one of five groups based on the final irrigant used, with the control group receiving NaOCl+EDTA and the experimental groups receiving MG, FTC, OW, and GTE. The GFP was cemented with a self-etching, dual-cure paste; the bond strength was estimated with a universal testing machine; and failure analysis was conducted with a stereomicroscope.

RESULTS

The highest PBS was observed in the coronal third of Group 4 (using ozonated water as the final irrigant), whereas the lowest bond integrity was observed in the apical section of Group 2 (1.02-0.54 MPa) using Malachite green as the final irrigant. Group 1, Group 4, and Group 5 exhibited no significant difference in the bond integrity of GFP to dentin when compared to Group 2 (p>0.05). In addition, comparable bond score values were obtained for Groups 2 and 3 (p>0.05).

CONCLUSION

The results of this study suggest that OW and GTE may be effective final disinfectants for root canals, as they increase the bond strength of resin-luting cement.

The effect of 400 nm femtosecond laser and Zn(II)chlorin e6 methyl ester (Zn(II)e6Me) photosensitizer on disinfection of radicular dentin bonded to glass fiber post

AIM

To assess and compare push-out bond strength (PBS) when canal disinfected with 5.25% NaOCl, 400 nm femtosecond laser, and natural PS activated by PDT (CP and Zn (II) Ce6 methyl ester) on bond efficacy of radicular dentin bonded to glass fiber post.

MATERIAL AND METHODS

A sum of 40 non-traumatic, cautiously extracted with closed apex human mandibular premolars were collected and decoronated up to the cement-o-enamel junction. Canals of all specimens were cleaned and shaped using a Protaper universal NiTi system via a crown-down approach, then finally dried out and obturated with gutta-percha. Post alignment space was formed with peso reamers and sanitized. Then samples were randomly allocated into four groups as per the radicular dentin designated disinfection protocols. Group 1 disinfected with curcumin photosensitizer + EDTA, group 2: 5.25% NaOCl and EDTA, group 3: Zn (II) Ce6 methyl ester and EDTA and group 4 sanitized with 400 nm fs-laser + EDTA. GFP was cemented into the radicular canal space and specimens were placed in a thermocycler. Segmentation of the root was done at three levels (coronal, middle, and apical) and positioned in a universal testing machine for PBS analysis. Failure mode analysis was performed using a stereomicroscope and statistical analysis was executed by one-way ANOVA and Tukey multiple comparison tests at a statistically significant level of p < 0.05.

RESULTS

The highest PBS was revealed by group 2 canal disinfected with 5.25% NaOCl +17% EDTA (control) at coronal (9.49 ± 1.42 MPa) and middle (7.545 ± 0.15 MPa) root levels. Whereas, the lowest PBS was displayed by group 3: Zn (II) Ce6 methyl ester +17% EDTA at coronal (6.31 ± 0.54 MPa) middle (4.85 ± 0.11 MPa) root levels respectively. Intergroup comparison presented that radicular dentin disinfected with 400 nm femtosecond laser + 17% EDTA substantiated comparable PBS result to group 2 (control) at all three root levels (p > 0.05). Likewise, root surface disinfection with Curcumin activated by PDT+17% EDTA unveiled no statistically significant result for specimens disinfected with Zn(II) Ce6 methyl ester +17% EDTA(p > 0.05). Furthermore, apical root segments in all groups showed a substantial decrease in PBS value and were comparable (p > 0.05).

CONCLUSION

The bond efficacy of glass fiber post to radicular dentin disinfected with 400 nm femtosecond laser has the potential to be used as an alternative to conventional sodium hypochlorite.

How the translucency of direct anatomic fiber posts affects the bond strength and microhardness of a self-adhesive luting agent in flared roots

OBJECTIVES

To evaluate the influence of the composite resin translucency used in direct anatomic fiber posts on the bond strength (BS) and microhardness (VHN) of a luting agent into flared roots.

MATERIALS AND METHODS

The root canals of 70 single-rooted premolars were endodontically treated and prepared to simulate an oversized root canal. Prior to post cementation, composite resins with varying translucency (high translucent, HT; medium translucent, MT; high opacity, HO) were placed around the fiber posts to create anatomic fiber posts. The attenuation profile (%) of light passing either through the post or through the anatomic posts (n = 8) was obtained prior to the cementing procedures. A positive control group (PC) in which a prefabricated fiber post (PFP) with the diameter compatible with the root canal was cemented and a poorly adapted fiber post (negative control group, NC) were also evaluated. For both tests, the data were subjected to 2-way ANOVA and Bonferroni tests (α = 0.05).

RESULTS

A more severe light attenuation through the post at the cervical (P < .001) and medium (P < 0.001) thirds was noted when less translucent composite resin surrounded the anatomic post. HO groups showed lower BS (P = .009) and VHN (P < .001) values than the other groups, regardless of root third. No significant difference in BS values was noted between PC and HT groups.

CONCLUSION

The use of a more translucent composite resin in anatomic fiber posts increased the microhardness and bond strength of a dual polymerization self-adhesive RLA compared to the use of MT and HO composite. A well-adapted PFP showed the highest adhesive and mechanical behavior.

CLINICAL RELEVANCE

Clinicians should choose more translucent composite resins to create direct anatomic fiber posts to be cemented in flared root canals. That choice may allow improved mechanical properties of self-adhesive RLA and higher bond strength to the root canal as a consequence.

Fracture resistance and stress distribution of weakened teeth reinforced with a bundled glass fiber-reinforced resin post

OBJECTIVES

To make an in vitro assessment of fracture resistance of weakened and non-weakened teeth receiving intraradicular reinforcement using Rebilda bundled glass fiber-reinforced composite posts (GT), Rebilda conventional glass fiber posts (RP), or both systems combined (GT + RP).

MATERIALS AND METHODS

Eighty sound bovine incisors were prepared and divided randomly into eight groups as follows: (a) nWnR: without simulating weakness, and without intraradicular reinforcement; (b) WnR: simulating weakness, but without intraradicular reinforcement; (c) nWGT: without simulating weakness, but with GT; (d) WGT: simulating weakness, and with GT; (e) nWRP: without simulating weakness, but with RP; (f) WRP: simulating weakness, and with RP; (g) nWGTRP: without simulating weakness, but with GT + RP; (h) WGTRP: simulating weakness, and with GT + RP. The specimens were subjected to the load-to-fracture test using the DL-2000MF universal testing machine. The finite element method assessed the mechanical behavior and stress distribution in endodontically treated teeth.

RESULTS

The groups nWGTRP and WGTRP presented the best results in the load-to-fracture test, with the former being better than the latter, but with no statistically significant difference (P > 0.05). However, there was a significant difference between these and the other groups (P < 0.05), except for nWRP. Stress distribution inside the canal wall was different among the groups, with promising mechanical behavior for nWGTRP and nWRP.

CONCLUSIONS

The Rebilda conventional fiber post (RP), combined with the Rebilda bundled glass fiber-reinforced composite post (GT) improves the resistance and stress distribution of immature teeth.

CLINICAL RELEVANCE

Longitudinal fracture is less frequent in teeth restored with GT and RP posts.

Posts in Primary Teeth-Past to Present: A Review of Literature

Early childhood caries is indeed a devastative situation for both patients’ parents and pediatric dentists. The primary goal in treating severe early childhood caries is to restore normal function such as maintenance of mesiodistal and vertical dimension, prevention of alteration of mastication, phonetics (due to premature loss), development of parafunctional habits, and prevention of psychological problems affecting the self-esteem of a child. The restoration of primary dentition with extensive carious lesions is a complex clinical challenge of several dimensions. The severity of this condition in maxillary anterior teeth has prompted the extraction of teeth due to inadequate esthetic treatment options. The only concern with the severely destructed primary incisors is a lack of crown structure, which fails to support and adhere to a composite crown. Clinicians have preferred many restorative modalities for esthetic rehabilitation of badly decayed anterior primary teeth with numerous root canal retentive post and core systems with appropriate techniques to preserve those teeth until they are replaced by permanent teeth. This review highlights the various posts, their indications, principles, ideal properties, and the current concepts on their use in pediatric dentistry.

The influence of customization of glass fiber posts on fracture strength and failure pattern: A systematic review and meta-analysis of preclinical ex-vivo studies

OBJECTIVE

To perform a systematic review of the literature focused to evaluate in vitro function of prefabricated fiber posts with and without customization by additional auxillary fiber posts and composite resin on the fracture strength of wide or enlarged canals and the failure pattern.

METHODS

Six databases were used as primary search sources (PubMed, Scopus, LILACS, SciELO, Science Direct, and Web of Science) and three databases (Open Grey, Open Thesis, and OATD) were used to partially capture the "grey literature". The research included laboratory studies that used human upper anterior teeth aiming to assess the fracture strength and failure pattern of different glass fiber post customizations by additional auxiliary fiber posts or composite resin. The search had no restriction of year, language, and publication status. The risk of bias of the studies was assessed from the criteria established in systematic reviews of laboratory studies. Standardized mean differences were calculated by comparing the mean fracture strengths of customized and non-customized posts. Pooled estimates were calculated by Glass' delta method using the random-effects model. Subtotal estimates were presented according to each type of relining procedure and an overall estimate was described considering all studies combined.

RESULTS

The search provided 2291 results, from which six met the eligibility criteria and were included in the qualitative assessment of the review. Only three studies presented a moderate risk of bias. The meta-analysis results showed that the use of auxiliary posts produced higher mean fracture strengths than non-customized posts (SMD = 2.21; 95%CI: 0.74; 3.68), and it was more effective than the use of composite resin to reline the posts.

CONCLUSION

Based on laboratories studies, even though has not been observed any difference to a statistically significant level on fracture strength and failure pattern of the customized and non-customized post, future studies should follow a standardized approach to implementation and reporting of data.

Effect of Different Resin Cements on the Bond Strength of Custom-made Reinforced Glass Fiber Posts-A Push-out Study

AIM AND OBJECTIVE

This study aims to evaluate the effect of different resin cements on the bond strength (BS) of custom-made glass fiber posts (GFPs) using the push-out test.

MATERIALS AND METHODS

Twenty-four uniradicular bovine teeth were selected. The crowns were sectioned at the cementoenamel junction, and the root canals were treated. The post spaces of the teeth were prepared to a length of 12 mm to receive a GFP. The specimens were randomly assigned to three experimental groups (n = 8), according to the resin cement used to fix the GFPs: RelyX U200 (U200), Allcem Core (ACC), and Allcem Dual (ACD). Each specimen was sectioned into six slices per root third (cervical, middle, and apical), which were subjected to the push-out test. BS values were calculated and compared using the Kruskal-Wallis and Friedman tests.

RESULTS

There were significant differences in the middle third, according to the resin cement type used (p < 0.05). ACD showed lower BS values (p < 0.05). Significant differences were observed for ACD among the thirds of the slices, with the lowest values also observed for the middle third (p < 0.05).

CONCLUSION

The present study shows that ACC and U200 showed higher BS values compared with ACD, and were also less influenced by the depth of the root dentin.

CLINICAL SIGNIFICANCE

The restoration of endodontically treated teeth is a challenge in dentistry, and, in most cases, will require installation of fiberglass pins. In this respect, several types of resin cements are indicated for cementation of these pins; for this reason, their adhesiveness must be adequately investigated. Conventional cements and self-adhesive cements have shown satisfactory performance in cementing the custom-made GFPs, thereby making these cements satisfactory clinical choices. The present study suggests that ACD had lower performance than the other two cements evaluated.

Influence of endodontic sealers with different chemical compositions on bond strength of the resin cement/glass fiber post junction to root dentin

OBJECTIVE

This study evaluated the influence of endodontic sealers with different chemical compositions on bond strength of resin cement/glass fiber post junction to root dentin.

MATERIALS AND METHODS

Seventy-two maxillary canines roots were instrumented with Reciproc (#R50) and distributed in 6 groups (n = 12) according to endodontic sealers: G1-control (no sealer); G2-Endofill; G3-Sealapex; G4-AH Plus; G5-Sealer Plus; G6-EndoSequence BC. The glass fiber post was cemented with Panavia F in 10 of the specimens. Two specimens from each group did not receive post and were analyzed by SEM to verify presence of filling material. Three slices were obtained from each third. The first slice was subjected to push-out test and type of failure. The second slice was imaged using laser confocal microscopy for evaluation of dentin/resin cement adhesive interface. Bond strength (BS) data were analyzed using two-way ANOVA and Tukey's post hoc tests; for LCM data, we used Kruskal-Wallis and Dunn's tests.

RESULTS

Endofill yielded the lowest BS values (p < 0.05). The control and AH Plus groups differed from all others (p < 0.05). In all groups, adhesive to dentin failure predominated. Most specimens of control and AH Plus groups had acceptable interfaces, while those of EndoSequence BC, Sealapex, and Sealer Plus groups ranged between acceptable and poor interfaces. Overall, few filling material remnants were observed on the dentin.

CONCLUSION

EndoSequence BC, Sealapex, Sealer Plus, and Endofill negatively interfere with BS of glass fiber post/resin cement junction to root dentin.

CLINICAL RELEVANCE

In cases whose restoration planning includes a post cemented with resin cement, it is recommended that endodontic sealer be based on epoxy resin.

A Comparative Analysis of Fracture Resistance and Mode of Failure of Endodontically Treated Teeth Restored Using Different Fiber Posts: An In Vitro Study

AIM

To evaluate the fracture resistance under static loading of endodontically treated teeth (maxillary central incisors) restored with carbon fiber posts, glass fiber posts, and everStick posts. The objectives of this study were to check the fracture resistance of the everStick post and compare it with glass fiber posts and carbon fiber posts and evaluated their modes of failure.

MATERIALS AND METHODS

An estimated 80 freshly extracted human maxillary central incisors were collected for this study. The coronal portions of 60 teeth were sectioned 4 mm incisal to the cemento-enamel junction (CEJ) and 20 teeth were left intact to be used as controls. All the samples were embedded vertically in acrylic resin blocks and the groups were divided as follows. I-control group, II-carbon fiber group, III-glass fiber group, and IV-everStick (E-glass) group. Root canal treatment was completed in all the 80 teeth of 4 groups. Control group teeth were restored with a composite. In all other teeth, post and core placement was carried out. All specimens were mounted on a test block and subjected to static loading until fracture and the mode of fracture was recorded. Statistical analysis was carried out using ANOVA to calculate the mean values of all groups. An intergroup comparison was carried out using Tukey's post hoc test.

RESULTS

The study showed that group I showed the highest fracture resistance followed by group IV, which is everStick post group under static loading. There was a significant difference among test groups. The main mode of fracture was repairable as there was debonding of the core in all the fiber posts.

CONCLUSION

Teeth of the control group showed highest fracture resistance and teeth restored with everStick posts showed higher fracture resistance than those restored with glass fiber or carbon fiber posts under static loading (p < 0.05). The principal mode of fracture was debonding of core and remaining root. Teeth restored without application of a post showed the highest fracture resistance than all other groups.

CLINICAL SIGNIFICANCE

EverStick/E-glass fiber posts showed significantly higher fracture resistance than the other fiber posts and can be suggested for clinical use. How to cite this article: Doshi P, Kanaparthy A, Kanaparthy R, et al. A Comparative Analysis of Fracture Resistance and Mode of Failure of Endodontically Treated Teeth Restored Using Different Fiber Posts: An In Vitro Study. J Contemp Dent Pract 2019;20(10):1195-1199.

Survival of Composite Resin Restorations of severely Decayed Primary Anterior Teeth retained by Glass Fiber Posts or Reversed-orientated Metal Posts

Aim: The aim of this study was to compare the survival of composite resin restorations retained by glass fiber posts or reversed-orientated (upside-down) metal posts in severely decayed primary anterior teeth after 6, 12, and 18 months.

Materials and methods: A total of forty-four 3- to 5-year-old children with bilateral severely decayed primary maxillary canines were included. Patients were treated under general anesthesia. After pulpectomy, an intracanal post was seated in the primary maxillary canine on each side: either a glass fiber post or a metallic post in reversed orientation and teeth restored with light-cured composite. Survival rate of each technique was evaluated at predetermined follow-ups and data were analyzed with McNemar’s test (α = 0.05).

Results: The difference in survival of restorations retained by two types of posts was not statistically significant in clinical and radiographical evaluations after 6, 12, and 18 months. The survival rate of reversed-orientated metal and glass fiber posts after 18 months was 81.1 and 67.6% respectively (p = 0.14).

Conclusion: Reversed-orientated metal post did not show lower clinical survival compared with glass fiber posts in 18-month follow-up. Hence, reversed-orientated metal post can be considered as a potential method to obtain retention for composite restorations in severely decayed primary anterior teeth.

How to cite this article: Vafaei A, Ranjkesh B, L0vschall H, Erfanparast L, Jafarabadi MA, Oskouei SG, Isidor F. Survival of Composite Resin Restorations of severely Decayed Primary Anterior Teeth retained by Glass Fiber Posts or Reversed-orientated Metal Posts. Int J Clin Pediatr Dent 2016;9(2):109-113.

A Comparative Evaluation of Effect of Different Chemical Solvents on the Shear Bond Strength of Glass Fiber reinforced Post to Core Material

Aim: To compare the effect of different chemical solvents on glass fiber reinforced posts and to study the effect of these solvents on the shear bond strength of glass fiber reinforced post to core material.

Materials and methods: This study was conducted to evaluate the effect of three chemical solvents, i.e. silane coupling agent, 6% H₂O₂ and 37% phosphoric acid on the shear bond strength of glass fiber post to a composite resin restorative material. The changes in post surface characteristics after different treatments were also observed, using scanning electron microscopy (SEM) and shear bond strength was analyzed using universal testing machine (UTM).

Results: Surface treatment with hydrogen peroxide had greatest impact on the post surface followed by 37% phosphoric acid and silane. On evaluation of the shear bond strength, 6% H₂O₂ exhibited the maximum shear bond strength followed in descending order by 37% phosphoric acid and silane respectively.

Conclusion: The surface treatment of glass fiber post enhances the adhesion between the post and composite resin which is used as core material. Failure of a fiber post and composite resin core often occurs at the junction between the two materials. This failure process requires better characterization.

How to cite this article: Sharma A, Samadi F, Jaiswal JN, Saha S. A Comparative Evaluation of Effect of Different Chemical Solvents on the Shear Bond Strength of Glass Fiber Reinforced Post to Core Material. Int J Clin Pediatr Dent 2014;7(3):192-196.

Influence of modification in core building procedure on fracture strength and failure patterns of premolars restored with fiber post and composite core

PURPOSE

The influence of the modified process in the fiber-reinforced post and resin core foundation treatment on the fracture resistance and failure pattern of premolar was tested in this study.

MATERIALS AND METHODS

Thirty-six human mandibular premolars were divided into 4 groups (n = 9). In group DCT, the quartz fibre post (D.T. Light-post) was cemented with resin cement (DUO-LINK) and a core foundation was formed with composite resin (LIGHT-CORE). In group DMO and DMT, resin cement (DUO-LINK) was used for post (D.T. Light-post) cementation and core foundation; in group DMO, these procedures were performed simultaneously in one step, while DMT group was accomplished in separated two steps. In group LCT, the glass fiber post (LuxaPost) cementation and core foundation was accomplished with composite resin (LuxaCore-Dual) in separated procedures. Tooth were prepared with 2 mm ferrule and restored with nickel-chromium crowns. A static loading test was carried out and loads were applied to the buccal surface of the buccal cusp at a 45 degree inclination to the long axis of the tooth until failure occurred. The data were analyzed with MANOVA (α = .05). The failure pattern was observed and classified as either favorable (allowing repair) or unfavorable (not allowing repair).

RESULTS

The mean fracture strength was highest in group DCT followed in descending order by groups DMO, DMT, and LCT. However, there were no significant differences in fracture strength between the groups. A higher prevalence of favorable fractures was detected in group DMT but there were no significant differences between the groups.

CONCLUSION

The change of post or core foundation method does not appear to influence the fracture strength and failure patterns.

A comparative evaluation of fracture resistance of endodontically treated teeth restored with different post core systems - an in-vitro study

PURPOSE

To compare the fracture resistance and the mode of failure of endodontically treated teeth restored with different post-core systems.

MATERIALS AND METHODS

Root canal treatment was performed on 40 maxillary incisors and the samples were divided into four groups of 10 each. For three experimental groups post space preparation was done and teeth were restored with cast post-core (Group B), stainless steel post with composite core (Group C) and glass fiber post with composite core using adhesive resin cement (Group D). Control group (A) samples were selected with intact coronal structure. All the samples were prepared for ideal abutment preparation. All the samples were subjected to a load of 0.5 mm/min at 130° until fracture occurred using the universal testing machine. The fracture resistance was measured and the data were analyzed statistically. The fracture above the embedded resin was considered to be favorable and the fracture below the level was considered as unfavorable. The statistical analysis of fracture resistance between different groups was carried out with t-test. For the mode of failure the statistical analysis was carried out by Kruskal-Wallis test and Chi-Square test.

RESULTS

For experimental group Vs control group the fracture resistance values showed significant differences (P<.05). For the mode of failure the chi-square value is 16.1610, which means highly significant (P=.0009) statistically.

CONCLUSION

Endodontically treated teeth without post core system showed the least fracture resistance demonstrating the need to reinforce the tooth. Stainless steel post with composite core showed the highest fracture resistance among all the experimental groups. Teeth restored with the Glass fiber post showed the most favorable fractures making them more amenable to the re-treatment.