The occurrence and probabilistic risk assessment of 3-MCPDEs and GEs in infant formulas from Chinese market employing Monte Carlo simulation technique

3-monochloropropane-1,2-diol esters (3-MCPDEs) and glycidyl esters (GEs) are food contaminants and have arisen continuous attention due to their toxicity, especially towards infants. Current risk assessment of these contaminants was mostly employing deterministic approaches, lacking quantitative characterization of the likelihood, incidence, or severity of the risks involved. Herein, 3-MCPDE and GE levels in 46 representative infant formulas (IFs) from Chinese market were determined by GC-MS/MS. Then, combining the occurrence data and consumption data from China National Food Consumption Survey, the Monte Carlo simulation-based probabilistic model for risk assessment of 3-MCPDEs and GEs in IFs from Chinese market was established. The results showed that all P90 (90th percentiles) hazard quotient values were below 1, demonstrating 3-MCPDEs didn't pose health risks to most populations aged 0-36 months old. However, for 0-12 months old groups, P10 (10th percentiles) margin of exposure values were all below 25000, indicating GEs may pose potential risks to 10% of this group. Uncertainty analysis revealed that the probabilistic model had considered uncertainties of model input and distribution, and realized refined assessment. This study is the first report on probabilistic assessment of 3-MCPDEs and GEs in IFs, which also provided references for the formulation of related regulatory limits in China.

Effects of deodorization on the content of polycyclic aromatic hydrocarbons (PAHs), 3-monochloropropane-1,2-diol esters (3-MCPDE) and glycidyl esters (GE) in rapeseed oil using ethanol steam distillation at low temperature

High temperature is beneficial for the removal of polycyclic aromatic hydrocarbons (PAHs) from oil via steam, but leads to an increase in the content of 3-monochloropropane-1,2-diol esters (3-MCPDE) and glycidyl esters (GE). To inhibit the production of 3-MCPDE and GE during the removal of PAHs, rapeseed oil was deodorized using ethanol steam at low-temperature (140-220 °C) (L-ESD) and the content changes were studied for PAHs, 3-MCPDE and GE, and compared with conventional high-temperature water steam deodorization (H-WSD) (250 °C for 60 min). The removal rates of PAHs in L-ESD oil can be higher than those in conventional H-WSD oil, and the contents of 3-MCPDE and GE in L-ESD oil (140-180 °C for 60-100 min) ranged from 48.32 to 73.65 % and 50.49-69.90 %, respectively, in H-WSD oil due to the lower temperature of ethanol steam deodorization. These results indicate that L-ESD is beneficial in minimizing the contents of PAHs, 3-MCPDE and GE in vegetable oil.

Occurrence of glycidyl esters in infant formula products on the Canadian market between 2015 and 2019

Glycidyl fatty acid esters (GEs) are processing contaminants formed during refining steps of vegetable oils. 'In vivo' hydrolysis of GEs releases potentially carcinogenic and genotoxic glycidol (2,3-epoxy-1-propanol). Occurrence of GEs in vegetable oils used for infant formula manufacturing may pose a potential health concern for formula-fed infants. Refined oils are commonly used as the main fat ingredient in formula manufacturing. For this study, different infant formula products (powders, concentrates and ready-to-feed formula products) were purchased and analysed in 2015 (35 samples) and 2019 (33 samples). Seven individual GEs were analysed by LC-MS/MS via direct approach by stable isotope dilution analysis, and total bound glycidol concentrations were calculated. Concentrations of bound glycidol in reconstituted formula reached maxima of 40.3 ng/g in the 2015 samples and 31.5 ng/g in the samples collected in 2019, with respective means of 8.7 ng/g and 6.7 ng/g. The analysed bound glycidol concentrations are comparable with concentration ranges from other studies, but are higher than observed in studies from the European market. Temporal trend data show a reduction of bound glycidol concentrations in 2019. GE concentrations were compared across different manufacturers.

Automated sample preparation and analysis by gas chromatography tandem mass spectrometry (GC-MS/MS) for the determination of 3- and 2-monochloropropanediol (MCPD) esters and glycidol esters in edible oils

The potentially carcinogenic process contaminant 3- and 2-monochloropropanediol esters (2-MCPD and 3-MCPD esters) and glycidyl esters (GEs) are under study in refined oils and foodstuffs. Legislation set recommended total daily intake (TDI) for 3-MCPD of 0.8 µg/kg and as low as reasonably achievable (ALARA) for glycidol. Usually, the so far adopted method for the determination of these contaminants relay on numerous and time-consuming steps for sample preparation (AOCS methods) and on GC-MS detection. The obtained sensitivities and the number of processable samples are thus limited. In this optic, new reliable methods that allow for the fast and sensitive determination of these contaminants in edible oils may be considered an improvement of the overall strategy of tackling the problem. In this paper a new automated method for sample preparation and detection by GC-MS/MS is presented and validated. Data on sensitivity (LOD at 1.5, 2.2 and 3 ng/g for 3-MCPD, 2-MCPD, 3-MBPD (deriving from glycidol), respectively), linearity across low and high calibration ranges and precision showed to be fit-for-purposes. Finally, the methodology was applied to ten extra virgin oil samples and one sample of sunflower seeds oil.

Chloride-mediated co-formation of 3-monochloropropanediol esters and glycidyl esters in both model vegetable oils and chemical model systems

3-Monochloropropanediol esters (3-MCPDEs) and glycidyl esters (GEs) with high toxicity have drawn global concerns due to their widespread occurrence in refined oils and oil-based foods. The effect mechanisms of organic chlorine compound lindane, inorganic chlorine compounds tetra-n-butylammonium chloride (TBAC) and sodium chloride (NaCl) on the formation of 3-MCPDEs and GEs were investigated in model oils and chemical models at 240 °C. Results showed that 3-MCPDEs contents increased with the addition of lindane and TBAC, whereas, surprisingly, GEs presented the same tendency as the results of 3-MCPDEs. This suggested that although chlorine compounds were not involved in the formation reaction of GEs, they could also promote GEs formation. Chemical model experiments confirmed that the presence of chlorine compounds led to the transformation of GEs to 3-MCPDEs and conversely 3-MCPDEs could also transform to GEs. The latter transformation rate from 3-MCPDEs to GEs was higher than the former, which might account for the fact that chlorine compounds promoted GEs formation. Additionally, it was also observed that solid NaCl did not induce the increase of 3-MCPDEs and GEs levels in chemical models, suggesting that the chlorine in NaCl, different from lindane and TBAC, was not available for 3-MCPDEs formation. The present findings give novel insights into the interactions between 3-MCPDEs and GEs formation mechanisms, which offer the theoretical basis for efficient and simultaneous inhibition of 3-MCPDEs and GEs.

Determination of 3-monochloropropanediol esters and glycidyl esters in fatty matrices by ultra-high performance liquid chromatography-tandem mass spectrometry

The development and validation of a method for the analysis of traces of 3-monochloropropanediol (3-MCPD) esters (19) and glycidyl esters (7) of fatty acids in vegetable oils, margarine, biscuits and croissants was performed. An extraction method based on the use of solvents (tert‑butyl methyl ether (20% ethyl acetate, v/v)) was carried out and cleaning of the extract with a mixture of sorbents (Si-SAX, PSA and Z-sep+) was optimized for the elimination of fatty interferents. The analysis of the targeted compounds was carried out by ultra-high-performance liquid chromatography coupled to tandem mass spectrometry, using a triple quadrupole analyzer (UHPLC-MS/MS-QqQ). The validation of the method provided trueness values between 72 and 118% and precision lower than 20%. The limits of quantification ranged from 0.01 to 0.1 mg kg^-1, which were below the current legal limits. Twenty samples of vegetable oils as well of 4 samples of margarine, biscuits and croissants were analyzed. Six out of the 24 samples (25%) exceeded the limits set by European legislation, and a maximum contamination of 3-MCPD esters at 2.52 mg kg^-1 was obtained in a sample of corn oil (being 1-myristoyl-3-MCPD the compound detected at the highest concentration). A maximum concentration of glycidyl esters at 7.84 mg kg^-1 was determined in a soybean oil sample (glycidyl linoleate as the main compound). Only one sample of olive oil exceeded the maximum allowable limit for 3-MCPD esters with a value of 1.72 mg kg^-1, expressed as 3-MCPD.

Effective physical refining for the mitigation of processing contaminants in palm oil at pilot scale

This study aimed to develop a mitigation strategy for the formation of 2-monochloropropane-1,3-diol esters (2-MCPDE), 3-monochloropropane-1,2-diol esters (3-MCPDE), and glycidol fatty acid esters (GE) during palm oil refining. Single physical refining was the starting point (the control) for this study. Experimental treatments including a double refining repeating the entire single refining process (T1), double refining with a high-low deodorization temperature (T2), and double deodorization (T3) with similar temperature settings as T2 were performed. Compared with the control experiment, T2 successfully reduced the formation of GE by 87%; in particular, the second degumming and bleaching were crucial for eliminating GE. Both 2- and 3-MCPDE were formed prior to the deodorization process in all treatments. MCPDE concentrations remained stable throughout the refining process and, hence, they require a different mitigation approach as compared to GE. These results provide useful insights which can directly be implemented by the oil industry.

Influence of dough composition on the formation of processing contaminants in yeast-leavened wheat toasted bread

The influence of dough composition on acrylamide, 3-monochloropropane-1,2-diol (3-MCPD) esters, and glycidyl esters (GE) formation during bread toasting was investigated. The doughs differed in added amounts of soy lecithin, salt, and reducing agents (l-cysteine and glutathione). The toasting of bread for 2.5 min considerably enhanced the formation of acrylamide and 3-MCPD esters. The addition of lecithin (1%, w/w) resulted in four times higher content of 3-MCPD esters in toasted bread slices. No distinct relationship between dough composition and GE formation in untoasted and toasted bread was found. The addition of reducing agents (0.05%, w/w) mitigated during toasting not only the formation of 3-MCPD esters (more than six times) but also the extent of Maillard reaction that resulted in three times lower amounts of acrylamide and predominant formation of alcohol-like compounds. Toasted bread without reducing agents contained typical Maillard reaction compounds such as aldehydes, alkyl pyrazines, and derivatives of furan.

Carbohydrate-Based Fat Mimetics Can Affect the Levels of 3-Monochloropropane-1,2-Diol Esters and Glycidyl Esters in Shortbread Biscuits

Shortbread biscuits have become one of the most desirable snacks in all population groups but due to its high fat content it is searching for new solutions of fat reduction such as the use of carbohydrate-based fat mimetics. However, the thermal processing of food containing lipids in the presence of certain carbohydrates can contribute to the formation of toxic compounds or alter its levels. Therefore, the aim of the study was to evaluate the use of inulin and pectin gels as partial fat replacers (10-40%) in classical shortbread biscuits in a view of the changes of 3-monochloropropane-1,2-diol ester (3-MCPDE) and glycidyl ester (GE) levels after baking, and also after a two-months storage. The experiment showed that the amount of inulin gel higher than 10% promoted the endogenous formation of 3-MCPDE probably due to the higher amount of Maillard products formed in the biscuits, but after two months the levels decreased and were comparable with those transferred from shortening. Pectin did not demonstrate such phenomenon, owing to the presence of bound water in gel. Glycidyl esters were partially decomposed during baking and also during storage, particularly in the samples with the addition of pectin gel, which presumably caused by low stability of GE under acidic conditions resulting from the occurrence of galacturonic acid in pectin.

Assessment of critical steps of a GC/MS based indirect analytical method for the determination of fatty acid esters of monochloropropanediols (MCPDEs) and of glycidol (GEs)

Fatty acid esters of 2- and 3-chloropropanediol (MCPDEs) and fatty acid esters of glycidol (GEs) are commonly monitored in edible fats and oils. A recommendation issued by the European Commission emphasizes the need of generating data on the occurrence of these substances in a broad range of different foods. So far, analytical methods for the determination of MCPDEs and GEs are fully validated only for oils, fats and margarine. This manuscript presents the assessment of critical steps in the AOCS Cd 29a-13 method for the simultaneous determination of MCPDEs and GEs in the fat phase obtained from bakery and potato products, smoked and fried fish and meat, and other cereal products. The trueness of the method is affected by the additional formation of 3-MBPD esters from monoacylglycerols (MAGs), which are frequently present in food. The overestimation of GE contents for some samples was confirmed by the comparison of results with results obtained by an independent analytical method (direct analysis of GE by HPLC-MS/MS). An additional sample pre-treatment by SPE was introduced to remove MAGs from fat prior to the GEs conversion, while the overall method sensitivity was not significantly affected. Trueness of the determination of GEs by the modified analytical procedure was confirmed by comparison with a direct analysis of GEs. The potential impact on accuracy of results of the final sample preparation step of the analytical procedure, the derivatization of free forms MCPD and MBPD with PBA, was evaluated as well. Different commercial batches of PBA showed differences in solubility in a non-polar organic solvent. The PBA derivatization in organic solvent did not affect precision and trueness of the method due to the isotopic standard dilution. However, method sensitivity might be significantly compromised.

Glycidyl esters in refined palm (Elaeis guineensis) oil and related fractions. Part II: practical recommendations for effective mitigation

In a previous work, it was shown that at high temperatures (up to 280°C) glycidyl esters (GE) are formed from diacylglycerols (DAG) via elimination of free fatty acid (FFA). In the present study, the impact of DAG content and temperature on the formation of GE using a model vacuum system mimicking industrial edible oil deodorization is investigated. These deodorization experiments confirmed that the formation of GE from DAG is extensive at temperatures above 230-240°C, and therefore, this value should be considered as an upper limit for refining operations. Furthermore, experimental data suggest that the formation of GE accelerates in particular when the DAG levels in refined oils exceed 3-4% of total lipids. Analysis of the lipid composition of crude palm oil (CPO) samples allowed the estimation that this critical DAG content corresponds to about 1.9-2.5% of FFA, which is the conventional quality marker of CPO. Moreover, high levels (>100ppm) of GE were also found in palm fatty acid distillate samples, which may indicate that the level of GE in fully refined palm oils also depends on the elimination rate of GE into the fatty acid distillate.