A Low-Noise Interface ASIC for MEMS Disk Resonator Gyroscope

This paper proposes a low-noise interface application-specific integrated circuit (ASIC) for a microelectromechanical systems (MEMS) disk resonator gyroscope (DRG) which operates in force-to-rebalance (FTR) mode. The ASIC employs an analog closed-loop control scheme which incorporates a self-excited drive loop, a rate loop and a quadrature loop. A ΣΔ modulator and a digital filter are also contained in the design to digitize the analog output besides the control loops. The clocks for the modulator and digital circuits are both generated by the self-clocking circuit, which avoids the requirement of additional quartz crystal. A system-level noise model is established to determine the contribution of each noise source in order to reduce the noise at the output. A noise optimization solution suitable for chip integration is proposed based on system-level analysis, which can effectively avoid the effects of the 1/f noise of the PI amplifier and the white noise of the feedback element. A performance of 0.0075°/√h angle random walk (ARW) and 0.038°/h bias instability (BI) is achieved using the proposed noise optimization method. The ASIC is fabricated in a 0.35 μm process with a die area of 4.4 mm × 4.5 mm and power consumption of 50 mW.

Analysis of Parametric and Subharmonic Excitation in Push-Pull Driven Disk Resonator Gyroscopes

For micro-electromechanical system (MEMS) resonators, once the devices are fabricated and packaged, their intrinsic quality factors (Q) will be fixed and cannot be changed, which seriously limits the further improvement of the resonator’s performance. In this paper, parametric excitation is applied in a push-pull driven disk resonator gyroscope (DRG) to improve its sensitivity by an electrical pump, causing an arbitrary increase of the “effective Q”. However, due to the differential characteristics of the push-pull driving method, the traditional parametric excitation method is not applicable. As a result, two novel methods are proposed and experimentally carried out to achieve parametric excitation in the push-pull driven DRGs, resulting in a maximum “effective Q” of 2.24 × 10⁶ in the experiment, about a 7.6 times improvement over the intrinsic Q. Besides, subharmonic excitation is also theoretically analyzed and experimentally characterized. The stability boundary of parametric excitation, defined by a threshold voltage, is theoretically predicted and verified by related experiments. It is demonstrated that, when keeping the gyroscope’s vibration at a constant amplitude, the fundamental frequency driving voltage will decrease with the increasing of the parametric voltage and will drop to zero at its threshold value. In this case, the gyroscope operates in a generalized parametric resonance condition, which is called subharmonic excitation. The novel parametric and subharmonic excitation theories displayed in this paper are proven to be efficient and tunable dynamical methods with great potential for adjusting the quality factor flexibly, which can be used to further enhance the resonator’s performance.