Impact of electrode micro- and nano-scale topography on the formation and performance of microbial electrodes

From a fundamental standpoint, microbial electrochemistry is unravelling a thrilling link between life and materials. Technically, it may be the source of a large number of new processes such as microbial fuel cells for powering remote sensors, autonomous sensors, microbial electrolysers and equipment for effluent treatment. Microbial electron transfers are also involved in many natural processes such as biocorrosion. In these contexts, a huge number of studies have dealt with the impact of electrode materials, coatings and surface functionalizations but very few have focused on the effect of the surface topography, although it has often been pointed out as a key parameter impacting the performance of electroactive biofilms. The first part of the review gives an overview of the influence of electrode topography on abiotic electrochemical reactions. The second part recalls some basics of the effect of surface topography on bacterial adhesion and biofilm formation, in a broad domain reaching beyond the context of electroactivity. On these well-established bases, the effect of surface topography is reviewed and analysed in the field of electroactive biofilms. General trends are extracted and fundamental questions are pointed out, which should be addressed to boost future research endeavours. The objective is to provide basic guidelines useful to the widest possible range of research communities so that they can exploit surface topography as a powerful lever to improve, or to mitigate in the case of biocorrosion for instance, the performance of electrode/biofilm interfaces.

Forming microbial anodes with acetate addition decreases their capability to treat raw paper mill effluent

Microbial anodes were formed under polarization at -0.3 V/SCE on graphite plates in effluents from a pulp and paper mill. The bioanodes formed with the addition of acetate led to the highest current densities (up to 6A/m(2)) but were then unable to oxidize the raw effluent efficiently (0.5A/m(2)). In contrast, the bioanodes formed without acetate addition were fully able to oxidize the organic matter contained in the effluent, giving up to 4.5A/m(2) in continuous mode. Bacterial communities showed less bacterial diversity for the acetate-fed bioanodes compared to those formed in raw effluents. Deltaproteobacteria were the most abundant taxonomic group, with a high diversity for bioanodes formed without acetate addition but with almost 100% Desulfuromonas for the acetate-fed bioanodes. The addition of acetate to form the microbial anodes induced microbial selection, which was detrimental to the treatment of the raw effluent.

Experimental and theoretical characterization of microbial bioanodes formed in pulp and paper mill effluent in electrochemically controlled conditions

Microbial bioanodes were formed in pulp and paper effluent on graphite plate electrodes under constant polarization at -0.3 V/SCE, without any addition of nutriment or substrate. The bioanodes were characterized in 3-electrode set-ups, in continuous mode, with hydraulic retention times from 6 to 48 h and inlet COD from 500 to 5200 mg/L. Current densities around 4A/m(2) were obtained and voltammetry curves indicated that 6A/m(2) could be reached at +0.1 V/SCE. A theoretical model was designed, which allowed the effects of HRT and COD to be distinguished in the complex experimental data obtained with concomitant variations of the two parameters. COD removal due to the electrochemical process was proportional to the hydraulic retention time and obeyed a Michaelis-Menten law with respect to the COD of the outlet flow, with a Michaelis constant KCOD of 400mg/L. An inhibition effect occurred above inlet COD of around 3000 mg/L.

Marine floating microbial fuel cell involving aerobic biofilm on stainless steel cathodes

Here is presented a new design of a floating marine MFC in which the inter-electrode space is constant. This design allows the generation of stable current for applications in environments where the water column is large or subject to fluctuations such as tidal effects. The operation of the first prototype was validated by running a continuous test campaign for 6months. Performance in terms of electricity generation was already equivalent to what is conventionally reported in the literature with basic benthic MFCs despite the identification of a large internal resistance in the proposed design of the floating system. This high internal resistance is mainly explained by poor positioning of the membrane separating the anode compartment from the open seawater. The future objectives are to achieve more consistent performance and a second-generation prototype is now being developed, mainly incorporating a modification of the separator position and a stainless steel biocathode with a large bioavailable surface.