Valorization of waste polyethylene terephthalate plastic into N-doped microporous carbon for CO2 capture through a one-pot synthesis

Valorization of waste polyethylene terephthalate (PET) plastic into microporous carbon with N-doping treatment was successfully performed in a one-pot synthesis and the N-doped microporous carbon was used for CO₂ capture, which can mitigate plastic pollution and climate change simultaneously. The PET-derived microporous carbon developed by KOH activation and urea treatment in a one-pot synthesis at 700 °C exhibited the highest CO₂ adsorption uptake of 6.23 mmol g^-1 at 0 °C and 4.58 mmol g^-1 at 25 °C (1 atm). The Langmuir and pseudo second-order models displayed well-fitting relationships with equilibrium and kinetic experimental data obtained in this study. The N-doped microporous carbon showed high CO₂ selectivity over N₂, implying that it is feasible for treating flue gases (10% CO₂ and 90% N₂) at 50 °C. In addition, the CO₂ uptake was not only affected by micropores but also related with nitrogen and oxygen functional groups. Compared to the porous carbon prepared by two-pot synthesis where KOH activation and urea treatment were conducted separately, the porous carbon prepared by one-pot synthesis had higher oxygen contents and higher CO₂ adsorption uptake. All of findings implied that the N-doped microporous carbon was successfully developed from waste PET plastic for capturing CO₂ and can play a promising role in both sustainable waste management and environmental protection.

Steam activation of waste biomass: highly microporous carbon, optimization of bisphenol A, and diuron adsorption by response surface methodology

Highly microporous carbons were prepared from argan nut shell (ANS) using steam activation method. The carbons prepared (ANS@H2O-30, ANS@H2O-90, and ANS@H2O-120) were characterized using X-ray diffraction, scanning electron microscopy, Fourier-transform infrared, nitrogen adsorption, total X-ray fluorescence, and temperature-programmed desorption (TPD). The ANS@H2O-120 was found to have a high surface area of 2853 m2/g. The adsorption of bisphenol A and diuron on ANS@H2O-120 was investigated. The isotherm data were fitted using Langmuir and Freundlich models. Langmuir isotherm model presented the best fit to the experimental data suggesting micropore filling of ANS@H2O-120. The ANS@H2O-120 adsorbent demonstrated high monolayer adsorption capacity of 1408 and 1087 mg/g for bisphenol A and diuron, respectively. The efficiency of the adsorption was linked to the porous structure and to the availability of the surface adsorption sites on ANS@H2O-120. Response surface method was used to optimize the removal efficiency of bisphenol A and diuron on ANS@H2O-120 from aqueous solution. Graphical abstract ᅟ.

Solid-state NMR studies of supercapacitors

Electrochemical double-layer capacitors, or 'supercapacitors' are attracting increasing attention as high-power energy storage devices for a wide range of technological applications. These devices store charge through electrostatic interactions between liquid electrolyte ions and the surfaces of porous carbon electrodes. However, many aspects of the fundamental mechanism of supercapacitance are still not well understood, and there is a lack of experimental techniques which are capable of studying working devices. Recently, solid-state NMR has emerged as a powerful tool for studying the local environments and behaviour of electrolyte ions in supercapacitor electrodes. In this Trends article, we review these recent developments and applications. We first discuss the basic principles underlying the mechanism of supercapacitance, as well as the key NMR observables that are relevant to the study of supercapacitor electrodes. We then review some practical aspects of the study of working devices using ex situ and in situ methodologies and explain the key advances that these techniques have allowed on the study of supercapacitor charging mechanisms. NMR experiments have revealed that the pores of the carbon electrodes contain a significant number of electrolyte ions in the absence of any charging potential. This has important implications for the molecular mechanisms of supercapacitance, as charge can be stored by different ion adsorption/desorption processes. Crucially, we show how in situ NMR experiments can be used to quantitatively study and characterise the charging mechanism, with the experiments providing the most detailed picture of charge storage to date, offering the opportunity to design enhanced devices. Finally, an outlook for future directions for solid-state NMR in supercapacitor research is offered.

An Ultra-microporous Carbon Material Boosting Integrated Capacitance for Cellulose-Based Supercapacitors

A breakthrough in advancing power density and stability of carbon-based supercapacitors is trapped by inefficient pore structures of electrode materials. Herein, an ultra-microporous carbon with ultrahigh integrated capacitance fabricated via one-step carbonization/activation of dense bacterial cellulose (BC) precursor followed by nitrogen/sulfur dual doping is reported. The microporous carbon possesses highly concentrated micropores (~ 2 nm) and a considerable amount of sub-micropores (< 1 nm). The unique porous structure provides high specific surface area (1554 m2 g-1) and packing density (1.18 g cm-3). The synergistic effects from the particular porous structure and optimal doping effectively enhance ion storage and ion/electron transport. As a result, the remarkable specific capacitances, including ultrahigh gravimetric and volumetric capacitances (430 F g-1 and 507 F cm-3 at 0.5 A g-1), and excellent cycling and rate stability even at a high current density of 10 A g-1 (327 F g-1 and 385 F cm-3) are realized. Via compositing the porous carbon and BC skeleton, a robust all-solid-state cellulose-based supercapacitor presents super high areal energy density (~ 0.77 mWh cm-2), volumetric energy density (~ 17.8 W L-1), and excellent cyclic stability.

Co-etching effect to convert waste polyethylene terephthalate into hierarchical porous carbon toward excellent capacitive energy storage

With the ever-increasing consumption of polyethylene terephthalate (PET) related products, how to recycle the waste PET still remains as a great challenge for the sustainable development. Converting waste PET into porous carbon material has been emerged as a promising way to address this issue. Recently, the microporous carbon derived from waste PET has drawn considerable attention in adsorption field, but its electrochemical application is still impeded by low specific surface area (SSA <1500 m² g^-1) and small meso-/macropores volume (<0.2 cm³ g^-1). Herein, hierarchical porous carbon (HPC) is successfully prepared from waste PET. The obtained HPC possesses a high SSA (2238 m² g^-1) and a large meso-/macropores volume (0.51 cm³ g^-1). The formation mechanism of hierarchical porous structure is proposed: co-etching effect of sp²/sp³ hybridized carbon produces micropores and meso-/macropores, respectively. In a three-electrode configuration, HPC based electrode achieves an outstanding capacitance of 413 F g^-1, while the traditional microporous carbon exhibits a low capacitance of 142 F g^-1. The fabricated symmetric supercapacitor shows a high energy density of 25 Wh kg^-1. This work provides a good reference to convert waste plastics into hierarchical porous carbon.

Microporous carbon nanoflakes derived from biomass cork waste for CO2 capture

Porous structure design is considered to be a promising strategy for the development of effective sorbents for CO₂ capture. Herein, a series of carbon nanoflakes with large surface area (up to 2380 m²/g) and high micropore volume (up to 0.896 m³/g) were synthesized from a renewable precursor, cork dust waste, to capture CO₂ at atmospheric pressure. The nanoflakes exhibited superior CO₂ uptake performance at 1 bar with the maximum capacity of 7.82 and 4.27 mmol/g at 0 and 25 °C, respectively, in sharp contrast to previously reported porous carbon materials. The existence of large numbers of narrow micropores with the pore width less than 0.86 nm and 0.70 nm play a critical role in the CO₂ uptake at 0 and 25 °C, respectively. Moreover, the CNFs exhibited good recyclability and high selectivity for CO₂ uptake from the mixture of CO₂ and N₂. By taking advantage of the unique hollow honeycomb cell, the three-layered cell wall structure, as well as the unique chemical composition of a cork precursor, such delicate microporous carbon nanoflakes were able to be achieved by simple thermal pretreatment combined with chemical activation. This bioinspired precursor-synthesis route poses a great potential for the facile production of porous carbons for a variety of diverse applications including CO₂ capture.

Unraveling the roles of microporous and micro-mesoporous structures of carbon supports on iron oxide properties and As (V) removal performance in contaminated water

This study investigates the impact of microporous (SP-C) and micro-mesoporous carbon (DP-C) supports on the dispersion and phase transformation of iron oxides and their arsenic (V) removal efficiency. The research demonstrates that carbon-supported iron oxide sorbents exhibit superior As(V) uptake capacity compared to unsupported Fe2O3, attributed to reduced iron oxide crystallite sizes and As(V) adsorption on carbon supports. Maximum As(V) uptake capacities of 23.8 mg/g and 18.9 mg/g were achieved for Fe/SP-C and Fe/DP-C at 30 wt% and 50 wt% iron loading, respectively. The study reveals a nonlinear relationship between As(V) sorption capacity and iron oxide crystallite size after excluding As(V) adsorption capacity on carbon supports, suggesting the iron oxide phase (Fe3O4) plays a role in determining adsorption capacity. Iron oxide-loaded DP-C sorbents exhibit faster adsorption rates at low As(V) concentrations (5 mg/L) than SP-C sorbents due to their bimodal pore structure. Adsorption behavior varies at higher As(V) concentrations (45 mg/L), with Fe/DP-C reaching maximum capacity more slowly due to limited available adsorptive sites. All adsorbents maintained near-complete As(V) removal efficiency over five cycles. The findings provide insights for designing more efficient adsorbents for As(V) removal from contaminated water sources.

Cherry tree gum-derived silver/microporous carbon: Reduction of nitroaromatic compounds by microwave-assisted reaction

In this study, a silver/microporous carbon (Ag@MC) nanocomposite was synthesized using cherry tree gum as a carbon precursor via a hydrothermal method. The catalytic performance of Ag@MC was evaluated for the reduction of nitroaromatic derivatives under solvent-free and microwave-assisted conditions, achieving yields higher than 90 % in just 5 min, significantly shorter than many comparable studies. Comprehensive characterization confirmed the structure and stability of Ag@MC, with silver nanoparticles effectively trapped within its microporous matrix. The nanocomposite demonstrated excellent reusability, maintaining high catalytic activity over six cycles, thereby adhering to green chemistry principles. These findings highlight the potential of using sustainable natural polymers for high-efficiency catalytic applications.

Pb nanospheres encapsulated in metal-organic frameworks-derived porous carbon as anode for high-performance sodium-ion batteries

Alloying-type anode materials are considered promising candidates for sodium-ion batteries (SIBs) due to their high theoretical capacities. However, their application is limited by the severe capacity decay stemming from dramatic volume changes during Na+ insertion/extraction processes. Here, Pb nanospheres encapsulated in a carbon skeleton (Pb@C) were successfully synthesized via a facile metal-organic frameworks (MOFs)-derived method and used as anodes for SIBs. The nanosized Pb particles are uniformly incorporated into the porous carbon framework, effectively mitigating volume changes and enhancing Na+ ion transport during discharging/charging. Benefiting from this unique architecture, a reversible capacity of 334.2 mAh g-1 at 2 A g-1 is achieved after 6000 cycles corresponding to an impressive 88.2 % capacity retention and a minimal capacity loss of 0.00748 % per cycle. Furthermore, a high-performance full sodium-ion battery of Pb@C//NVPF was constructed, demonstrating a high energy density of 291 Wh kg-1 and power density of 175 W kg-1. This facile MOFs-derived method offers insights into the design of high-capacity alloy-type anode materials using Pb sources, opening up new possibilities for innovative approaches to Pb recycling and pollution prevention.