Adjustable chromatographic performance of silica-based mixed-mode stationary phase through the control of co-grafting amounts of imidazole and C18 chain

In this paper, three imidazole- and C18- bifunctional silica stationary phases (Sil-Im-C18) were prepared by adjusting introduction interval of octadecyltrichlorosilane (ODS) and 3-imidazol-1-ylpropyl(trimethoxy)silane (TMPImS), which can be used for reversed-phase liquid chromatography (RPLC) and ion exchange chromatography (IEC) with adjustable performance. The successful preparation of Sil-Im-C18 were confirmed by the characterizations of elemental analysis, infrared spectroscopy (FTIR) and contact angle (CA). Chromatographic performance of Sil-Im-C18 were evaluated by the separation of Tanaka test mixture, alkylbenzenes, linear PAHs and a set of analytes with different properties (uracil, phenol, 1,2-dinitrobenzene and naphthalene), and compared with commonly used C18 column. It was found that the chromatographic performance of Sil-Im-C18 changed significantly with the difference in bonding amount of imidazole and C18. Sil-Im-C18 demonstrated the excellent separation performance towards polycyclic aromatic hydrocarbons (PAHs), phenylesters, phenylamines, phenols and inorganic anions, and notably, nucleobases and nucleosides can be separated using pure water as mobile phases. The van Deemter plot showed that the column efficiency of Sil-Im-C18-3 was 64,933 plate·m-1 for naphthalene, indicated that Sil-Im-C18 was reasonably chromatographic columns. The RSD values of retention time were 0.22 %-0.61 % for 10 needles alkylbenzenes injected continuously at 50 °C to investigate thermal stability and repeatability, all the fluctuations of k of naphthalene were less than 2.3 % for Sil-Im-C18-1 during flushing 24 h with the mobile phase at different pH values (pH = 3 and 8), the retention time of alkylbenzenes were almost same for Sil-Im-C18-1 at different time, the RSD values of retention time of alkylbenzenes were 0.45 %-2.28 % for two batches Sil-Im-C18-1, revealing the excellent repeatability, thermal stability, durability and reproducibility of Sil-Im-C18, and implying a commercial prospect.

Immobilization of two dendritic organic phases onto silica and their molecular shape recognition for polycyclic aromatic hydrocarbons, tocopherols and carotenoid isomers

BACKGROUND

Molecular shape selectivity, based on the size and shape parameters of the molecule, such as length and planarity, is a separation process that can be used for compounds with restricted shapes, such as isomers. The separation of geometric isomers is challenging because these compounds have similar physicochemical properties but differ slightly in molecular shape. The ability to separate and quantify these isomers is important in high performance liquid chromatography (HPLC), which is one of the most widely used techniques in separation science today, because the shape of the molecule has a strong influence on biological processes.

RESULTS

We prepared symmetrical discoidal dendrimeric organomolecule gelators (GSDM) and o-phenylenediamine-derived low-molecular-weight dendrimeric organomolecule gelators (G1) and bonded them to silica surfaces. The dendritic organic compound-grafted silica (SiO2@GSDM and SiO2@G1) was used as HPLC stationary phases for the separation of shape-restricted isomers of polycyclic aromatic hydrocarbons (PAHs), carotenoids and tocopherols. The two phases exhibit a very high molecular shape selectivity compared to the commercially available alkyl phases. There are differences in molecular shape selectivity between the two stationary phases. Changes in the chemical structure of dendritic organic compounds can alter the orientation of the molecules, as well as changes in the molecular recognition ability. It was found that SiO2@GSDM has high molecular linear selectivity for PAHs at different temperatures, even at 50 °C. The planar selectivity of SiO2@GSDM was better for triphenylene and o-terphenyl benzenes compared to SiO2@G1.

SIGNIFICANCE

This separation behavior may be attributed to the combined effect of weak interaction centers, which allowed the effective separation of bioactive and shape-restricted isomers through multiple interactions. Furthermore, SiO2@GSDM showed better separation of tocopherols and carotenoids, suggesting that the backbone and ordered structure of organic molecular gelators is an effective way to improve the shape selectivity of the molecules, whereas the molecular orientation of the functional groups influences the separation mechanism of the shape-restricted isomers.

Dendritic organic molecular gel coating with molecular shape selectivity and its application in selective separation by liquid chromatography

Dendritic organic molecular gels are a promising class of three-dimensional network compounds. Here, we have synthesized a new type of dendritic organic molecular gel stationary phase (SiO₂-G3) by using benzyl alcohol as raw material and dimethyl 5-hydroxyisophthalate as growth unit to synthesize a third-generation organic molecular gel G3, which grafted onto the silica surface by cyanogen chloride (CC). The developed stationary phase not only exhibits high molecular shape selectivity but also has a RPLC/HILIC/IEC mixed-mode characteristic for HPLC due to the ordered structure, the multiple strong π-π stacking interactions and the introduction of a hydrophilic triazine fraction during the grafting process. Compared with a commercial C₁₈ column, the developed column exhibited flexible selectivity, enhanced separation performance and excellent separation of monosubstituted benzene, polycyclic aromatic hydrocarbons (PAHs), positional isomers, nucleosides and nucleobases, benzoic acid and aniline compounds. In addition, the new column provided baseline separation of polycyclic aromatic hydrocarbon contaminants in Yellow River water, verifying its potential for application in the analysis of real samples.

A new ionic liquid bridged periodic mesoporous organosilicas stationary phase for per aqueous liquid chromatography and its application in the detection of biogenic amines

In order to solve the problems of using a large proportion of acetonitrile on the hydrophilic interaction liquid chromatography (HILIC) columns that was not environmentally friendly, and the poor acid and base resistance of traditional bonded silica columns, we reported a novel stationary phase of Au nanoparticles (Au NPs) covalently bonded to ionic liquid (ILs) bridged periodic mesoporous organosilicas (PMO) hydrophilic microspheres (PMO-ILs-Au NPs) for per aqueous liquid chromatography (PALC). The PMO hydrophilic microspheres were prepared by condensation of 1,3-bis(trimethoxysilylpropyl)imidazoliumchloride and 1, 2-Bis (triethoxysilyl) ethane and then modified with Au NPs the surface. The obtained materials were characterized by elemental analysis, FT-IR spectra, scanning electron microscope and transmission electron microscopy. The retention behavior was evaluated by investigating the effect of various chromatographic factors on the retention of different types of solutes. The retention mechanism of the stationary phases in PALC was a mixed type of anion-exchange and hydrophobic interaction. Compared with C₁₈-SiO₂ column, the acid and base resistance of the stationary phase were greatly improved. Compared with the HILIC column and C₁₈ column, some hydrophilic compounds such as six organic acids and eight biogenic amines were baseline separated with the enhanced resolution of the PMO-ILs-Au NPs column under the PALC mode. The efficiency of the new column was significantly higher than that of the HILIC column. Furthermore, the analysis of PALC-triple quadrupole mass spectrometry was developed for simultaneous detection of eight biogenic amines. This method could improve detection efficiency, save reagent and reduce environmental pollution. PALC as a green chromatography analytical method was suitable for the replacement of HILIC.

Mesoporous nanomaterial-assisted hydrogel double network composite for mixed-mode liquid chromatography

By introducing functional groups such as quaternary amine groups, sulfonic acid groups, triazine groups, and other mespore nanomaterials into the hydrogel, better separation effect of some organic framework materials has been obtained. Due to a reasonable design and preparation strategy, the hydrogel composite-modified silica can be used in the selective separation of various analytes such as pesticides, alkylbenzenes, polycyclic aromatic hydrocarbons, nucleosides/bases, benzoic acids, antibiotics, and carbohydrates. Through the exploration of chromatographic retention behavior, it is proved that the column can be used in mixed-mode liquid chromatography. The intra-day relative standard deviation for retention time of this new stationary phase is 0.12-0.16% (n = 10), and the inter-day relative standard deviation is less than 0.39% (n = 5). This new stationary phase can also be used for separation in complex samples. The limit of detection (LOD) for chlorotoluron in farm irrigation water is 0.21 µg/L and the linear range is 2-250 µg/L. After optimizing the chromatographic conditions, the highest efficiency of the hydrogel column in RPLC and HILIC modes has reached 32,400 plates/m (chlorobenzuron) and 41,300 plates/m (galactose). This new type of hydrogel composite is a porous network material with flexible functional design and simple preparation method and its application has been expanded in liquid chromatography separation successfully. The hydrogel composed of triallyl cyanate cross-linking agent and 3-(2-(methacryloyloxy) ethyl) dimethylamine) propane-1-sulfonate (SBMA) monomer which were co-modified on the surface of mesoporous silica with MOF-919 for separation in mixed-mode liquid chromatography.

An alternative strategy to construct uniform MOFs-Grafted silica core-shell composites as mixed-mode stationary phase for chromatography separation

The preparation of the metal-organic frameworks (MOFs)@silica core-shell microspheres as the stationary phases mainly relied on the method of electrostatic interaction between the metal ions of MOFs and the silanol groups. Herein, the ligands of MOFs were preferentially modified to the surface of silica as connection points and seed crystals to connect or form the MOFs. In this way, the evenness of the MOFs particles on the silica surface was effectively improved, and the prepared composites possessed excellent reproducibility and stability, including acid-base stability. The relative standard deviation of the retention time for repeatability ranged from 0.1% to 0.26% and for stability retention time from 0.3% to 0.6%. Compared with commercial columns, the prepared stationary phase showed enhanced separation selectivity for separation of both hydrophilic and hydrophobic compounds containing alkaloids, nucleosides, antibiotics and alkylbenzenes, etc. The obtained column was used as a matrix for fast separation and analysis of antibiotics in actual samples. In short, the composites showed superior reproducibility, stability and satisfactory separation performance towards a variety of compounds in the studied conditions. It also provided another way to improve the evenness of MOFs particles on the surface of silica and enhance the stability of them under polar conditions.

Fabrication of two-dimensional metal-organic framework nanosheets/PDA composites as mixed-mode stationary phase for chromatographic separation

The synthesis of two-dimensional metal-organic frameworks (2D MOFs)/polymer core-shell composites is reported which were composed of polydopamine modified 2D Zr-1,3,5-(4-carboxylphenyl)-benzene (2D Zr-BTB) nanosheets and silica microspheres via a double-solvent approach. In this way, the composites were obtained under the condition of two solvents with different polarities to avoid agglomeration and uneven modification of most MOFs particles on the surface of the silica, existing inevitably in the one-pot method. Compared with the reported MOFs@silica composites adopting one-pot solvent method, the prepared composites exhibited significantly enhanced separation performance for sulfonamides, antibiotics, nucleosides, and polycyclic aromatic hydrocarbons compounds. Furthermore, the retention mechanisms were demonstrated by studying the relationships of chromatographic retention factors of tested analytes versus a variety of parameters under RPLC and HILIC modes, respectively. The superior chromatographic repeatability and stability were validated through the relative standard deviations of the retention time and/or column efficiency, which were found to be less than 0.8% and 0.9%, respectively. The material showed efficient separation ability for several types of compounds and provided another selectivity for preparing composites based on 2D MOFs nanosheets and other functional molecules.

Prospects of using hyperbranched stationary phase based on poly(styrene-divinylbenzene) in mixed-mode chromatography

Evaluation of the chromatographic properties of covalently bonded hyperbranched stationary phase based on poly(styrene-divinylbenzene) (PS-DVB) and containing zwitterionic fragments in the structure of functional layer was conducted in suppressed ion chromatography (IC), reversed phase high performance liquid chromatography (RP HPLC), and hydrophilic interaction liquid chromatography (HILIC) modes. Besides the possibility of resolving 20 inorganic anions and organic acids using KOH eluent in suppressed IC, prepared resin provided the separation of alkylbenzenes in RP HPLC, water-soluble vitamins, amino acids, and sugars in HILIC mode. Trends in the retention of hydrophobic and polar analytes on the prepared stationary phase indicated the dominating effect of analyte nature on the retention mechanism and proved satisfactory hydrophilization of PS-DVB surface with hyperbranched functional layer for retaining polar compounds. The obtained results revealed good prospects of using hydrophobic PS-DVB substrate for preparing stationary phases for mixed-mode chromatography.

Design and evaluation of novel MOF-polymer core-shell composite as mixed-mode stationary phase for high performance liquid chromatography

A general method was developed for preparing a metal-organic framework-polymer composite coated silica core-shell stationary phase. Silica microspheres were comodified with metal-organic framework and polyvinylpyrrolidone rather than the in situ method of silica modification by original metal-organic framework particles. Metal-organic framework particles and polyvinylpyrrolidone on silica surface were beneficial to suppress silanol activity and enhance composite material tolerance, as well as increasing the water compatibility of the original metal-organic framework-based stationary phases. The stationary phase exhibited superior hydrophilic and hydrophobic performance in terms of separation for various analytes including seven alkaloids, six sulfonamides, five antibiotics, and five polycyclic aromatic hydrocarbons. Moreover, the composite material also showed excellent stability with the relative standard deviation of the retention time of 0.4 to 0.7%. The separation performance with real samples proved that the column has good practical application potential. In summary, the poposed method provides a general way for preparing metal-organic framework-polymer composite material and changed the current status of original metal-organic framework particles modified silica as a single mode chromatographic stationary phase.

Direct quantification of inorganic iodine in seawater by mixed-mode liquid chromatography-electrospray ionization-mass spectrometry

Atmospheric iodine plays a relevant role in climate change. Bearing in mind that most of this iodine comes from the oceans, analytical methods capable of determining iodine in a challenging matrix as seawater are necessary. In this work, the first method capable of direct determination of total inorganic iodine in seawater at subnanomolar level based on mixed-mode liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS) without any sample treatment is presented. Analytical characteristics of the developed method were studied in terms of linear range, limits of detection and quantification, precision, trueness, matrix effect, and robustness. The detection limit for iodide was as low as 0.16 nM, injecting 5 μL of seawater without any sample treatment and the working linear range of four orders of magnitude was wide enough to cover the broad concentration range observed in seawater samples. Average values for repeatability and intermediate precision were 4.1% and 8.1%, respectively. The suitability of the method was demonstrated through its application to the analysis of several types of samples, including seawater samples taken at different locations along the Spanish Mediterranean coast and some domestic iodized salts. According to the results obtained, the method developed is rapid, easy to apply and to be automated, avoids sample treatment and requires only few microliters of sample. Furthermore, it has a low detection limit and allows the quantification of inorganic iodine over a wide concentration range.

Synthesis, characterization, and application of a novel multifunctional stationary phase for hydrophilic interaction/reversed phase mixed-mode chromatography

A novel multifunctional stationary phase based on silica gel was synthesised starting from L- isoleucine and 4-phenylbutylamine and evaluated as a hydrophilic interaction/reversed-phase mixed-mode stationary phase for high-performance liquid chromatography (HPLC). The prepared stationary phase was characterized by elemental analysis, infrared spectroscopy (IR), scanning electron microscopy (SEM), Brunauer, Emmett and Teller (BET) and solid-state ¹³C nuclear magnetic resonance (NMR). The mechanisms involved in the chromatographic separation are multi-interaction, including hydrophobic, π-π, hydrogen-bonding, dipole-dipole and ion-dipole interactions. Based on these interactions, successful separation could be achieved among several aromatic compounds having different polarities under both hydrophilic interaction liquid chromatography (HILIC) and reversed phase (RP) condition. Nucleotides/nucleosides were separated in the HILIC mode. The effects of different separation conditions, such as pH value, mobile-phase content, column temperature, buffer concentration and flow rate, on the separation of nucleotides/nucleosides in HILIC mode were investigated. The seven nucleotides/nucleosides were separated within 22min, while six of them were separated within 10min by isocratic elution. To determine the influence of the new multifunctional stationary phase under the RP condition, a number of moderately and weakly polar and nonpolar compounds, such as 10 substituted anilines and eight substituted phenols were separated successfully under the RP condition within 14 and 15min, respectively. Additionally, nine mixtures of polar/nonpolar test compounds were simultaneously separated within 19min, while seven of them were separated within 12min, under HILIC/RP mixed-mode conditions. Chromatographic parameters, such as the retention factor and peak asymmetry factor, were calculated for all of the analytes, while the theoretical plate number was calculated for analytes separated by isocratic elution. Compared to traditional C18 and commercial HILIC columns, the new stationary phase exhibited both HILIC and RPLC performance, and the scope of analyte separation was thus enlarged.

Mixed-mode reversed phase/positively charged repulsion chromatography for intact protein separation

A mixed-mode reversed phase/positively charged repulsion stationary phase C8PN composed of octyl and amino group has been developed for separation of intact protein. Before the separation of proteins, a set of probe compounds were employed to evaluate the chromatographic properties of C8PN, demonstrating typical reversed phase/positively charged repulsion interaction on this stationary phase as estimated. Then the new C8PN stationary phase was used to separate a standard protein mixture on the reversed phase mode. Compared with a commercial C4 stationary phase, it showed different selectivity for some proteins. In order to better understand the properties of C8PN, the effect of acetonitrile content was investigated based on retention equation. Higher values of the equation parameters on C8PN demonstrated that the protein retentions were more sensitive to the change of acetonitrile content. Besides, the influences of buffer salt additives on the protein retentions were also studied. The retention factors of the proteins got larger with the increase of buffer salt concentration, which confirmed the positively charged repulsion interaction on the column. Finally, the C8PN was further applied to separate oxidized- and reduced- forms of Recombinant Human Growth Hormone. Our study indicated the advantages and application potential of mixed-mode reversed phase/positively charged repulsion stationary phase for intact protein separation.

Development of a nucleotide sugar purification method using a mixed mode column & mass spectrometry detection

Analysis of nucleotide sugars, nucleoside di- and triphosphates and sugar-phosphates is an essential step in the process of understanding enzymatic pathways. A facile and rapid separation method was developed to analyze these compounds present in an enzymatic reaction mixture utilized to produce nucleotide sugars. The Primesep SB column explored in this study utilizes hydrophobic interactions as well as electrostatic interactions with the phosphoric portion of the nucleotide sugars. Ammonium formate buffer was selected due to its compatibility with mass spectrometry. Negative ion mode mass spectrometry was adopted for detection of the sugar phosphate (fucose-1-phophate), as the compound is not amenable to UV detection. Various mobile phase conditions such as pH, buffer concentration and organic modifier were explored. The semi-preparative separation method was developed to prepare 30mg of the nucleotide sugar. (19)F NMR was utilized to determine purity of the purified fluorinated nucleotide sugar. The collected nucleotide sugar was found to be 99% pure.

Retention prediction of highly polar ionizable solutes under gradient conditions on a mixed-mode reversed-phase and weak anion-exchange stationary phase

In the present work the retention of three highly polar and ionizable solutes - uric acid, nicotinic acid and ascorbic acid - was investigated on a mixed-mode reversed-phase and weak anion-exchange (RP/WAX) stationary phase in buffered aqueous acetonitrile (ACN) mobile phases. A U-shaped retention behavior was observed for all solutes with respect to the eluent organic modifier content studied in a range of 5-95% (v/v). This retention behavior clearly demonstrates the presence of a HILIC-type retention mechanism at ACN-rich hydro-organic eluents and an RP-like retention at aqueous-rich hydro-organic eluents. Hence, this column should be promising for application under both RP and HILIC gradient elution modes. For this reason, a series of programmed elution runs were carried out with increasing (RP) and decreasing (HILIC) organic solvent concentration in the mobile phase. This dual gradient process was successfully modeled by two retention models exhibiting a quadratic or a cubic dependence of the logarithm of the solute retention factor (lnk) upon the organic modifier volume fraction (φ). It was found that both models produced by gradient retention data allow the prediction of solute retention times for both types of programmed elution on the mixed-mode column. Four, in the case of the quadratic model, or five, in the case of the cubic model, initial HILIC- and RP-type gradient runs gave satisfactory retention predictions of any similar kind elution program, even with different flow rate, with an overall error of only 2.5 or 1.7%, respectively.