Wavelength-dependent photoelectrochemical response demonstrated by the determination of acetaminophen and rutin in differential molecularly imprinted polymers strategy

Herein, the excitation wavelength-dependent responses of the molecularly imprinted polymer (MIP) photoelectrochemical (PEC) sensors were investigated, using acetaminophen (AP), rutin (RT) and perfluorooctanoate (PFOA) as the model templates, pyrrole as functional monomer, CuInS2@ZnS/TiO2 NTs as the basic photoelectrode. With wavelength λ > 240 nm, the photocurrent of MIPPFOA enhanced at higher concentrations of PFOA. With increasing AP concentration, the photocurrents of MIPAP could decline with λ < 271 nm, not change at λ = 270 nm, or increase with λ > 270 nm. As RT concentration increased, the photocurrents of MIPRT could decrease (λ < 431 nm), not change (λ = 431 nm) or increase (λ > 431 nm). The PEC responses depend on the comprehensive interaction of two contrary mechanisms from the template molecules within the MIP membrane. The photocurrent is enhanced by the role of the electron donor for photo-generated holes but attenuated due to the steric hindrance effect and the excitation light intensity loss via absorption or scattering. The apparent molar absorption coefficient of AP and RT within MIP membranes are 9.1-19.4 folds of those measured from dilute solutions. By using a routine UV lamp as the light source, the photocurrents of MIPRT at 254 nm and MIPAP at 365 nm were used to determine RT and AP, with the detection limits of 5.3 and 16 nM, respectively. The interference from the non-specific adsorption of interferents on the surfaces of MIPAP and MIPRT was reduced by one order of magnitude via a differential strategy.

A molecularly imprinted ratiometric fluorescence sensor based on blue/red carbon quantum dots for the visual determination of thiamethoxam

Neonicotinoids such as thiamethoxam (TMX) were widely used in agricultural production and tended to accumulate in the environment, potentially harming human and ecosystem health. To enable widespread monitoring of TMX residues, it was essential to design a reliable and sensitive detection method. Here, we developed a novel smartphone-enablled molecularly imprinted ratiometric fluorescence sensing system for selective on-site detection of TMX. It was based on blue-emission carbon dots (CDs) wrapped with a molecularly imprinted layer (B-CDs@MIPs), which provided the response signal, while red-emission CDs (R-CDs) served as an internal reference. The fluorescence signal ratio of the sensor increased with the TMX concentration, resulting in an obvious fluorescence color change from red to blue. The sensor exhibited a satisfactory limit of detection (LOD) of 13.5 nM in fluorescence analysis while LOD of 70.1 nM in visual determination. In addition, the sensing system was validated using food and environment samples, exhibiting recoveries from 91.40% to 105.7%, indicating excellent reliability for TMX detection in actual samples. Thus, the sensing system developed in this study offered promising prospects for visual detection of pesticide residues in complex environmental samples.

Application of molecular imprinting polymers in separation of active compounds from plants

Molecular imprinting technique is becoming an appealing and prominent strategy to synthesize materials for target recognition and rapid separation. In recent years, it has been applied in separation of active compounds from various plants and has achieved satisfying results. This review aims to make a brief introduction of molecular imprinting polymers and their efficient application in the separation of various active components from plants, including flavonoids, organic acids, alkaloids, phenylpropanoids, anthraquinones, phenolics, terpenes, steroids, and diketones, which will provide some clues to help stimulating research into this fascinating and useful area.

Selective Targeted Drug Delivery Mechanism via Molecular Imprinted Polymers in Cancer Therapeutics

Artificial receptor-like structures such as molecular imprinted polymers (MIPs) are biomimetic molecules are used to replicate target specific antibody-antigen mechanism. In MIPs, selective binding of template molecule can be significantly correlated with lock and key mechanism, which play a major role in the drug delivery mechanism. The MIPs are biocompatible with high efficiency and are considered in several drug delivery and biosensor applications besides continuous and controlled drug release leading to better therapeutics. There is a need to explore the potential synthetic methods to improve MIPs with respect to the imprinting capacity in cancer therapeutics. In this review, we focus on MIPs as drug delivery mechanism in cancer and the challenges related to their synthesis and applications.

Fluorometric determination of sulfadiazine by using molecularly imprinted poly(methyl methacrylate) nanobeads doped with manganese(II)-doped ZnS quantum dots

The surface of poly(methyl methacrylate) nanospheres (PMMA-NSs) was molecularly imprinted with sulfadiazine by a surface imprinting method. Simultaneously, Mn(II)-doped ZnS quantum dots were incorporated into the imprinted PMMA-NSs. The morphology of the fluorescent nanoprobe was characterized by transmission electron microscopy which revealed good spheroidal core-shell structure and a homogeneous distribution of the QDs. Following binding of sulfadiazine, fluorescence (best measured at excitation/emission maxima of 335/592 nm) is increasingly quenched. The detection range is 5-40 μmol·L^-1 of sulfadiazine, and the detection limit is 0.24 μmol·L^-1. The fluorescence quenching mechanism is discussed, and a photo-induced electron transfer process is shown to account for quenching. The fluorescent probe was applied to the determination of sulfadiazine in spiked tap water with recoveries and RSDs of 96.6-100.2% and 2.7-3.9%, respectively. The detection of sulfadiazine in spiked lake water exhibited the recoveries and RSDs with 99.3-104.8% and 1.8-4.2%, respectively. Graphical abstract Schematic presentation of synthesis of PMMA-Ns, Mn-doped ZnS QDs, MQPs, and the elution diagram of SD from MQPs, and the relative reagents including: sodium dodecyl benzene sulfonate(SDBS), (3-aminopropyl)triethoxysilane(APTES), 3-mercaptopropionic acid (MPA), tetraethylorthosilicate(TEOS)and sulfadiazine(SD), and nanoparticles including: polymer(methyl methacrylate) nanospheres(PMMANs), MIPs@QDs@PMMANs(MQPs) and carbon quantum dots(CQDs).

Mimicking new receptors based on molecular imprinting and their application to potentiometric assessment of 2,4-dichlorophenol as a food taint

Innovative host-tailored polymers were prepared, characterized and used as recognition elements in potentiometric transducers for the selective quantification of 2,4-dichlorophenol (DCP).The polymer beads were synthesized using DCP as a template molecule, acrylamide (AM),methacrylic acid (MAA) and ethyl methacrylate (EMA) as functional monomers and divinylbenzene (DVB) and ethylene glycol dimethacrylate (EGDMA) as cross-linkers. The sensors were fabricated by the inclusion of MIPs in plasticized polyvinyl chloride (PVC) matrix. Response characteristics of the proposed sensors revealed anionic slopes of -59.2, -49.7 and -80.6 mV/decade with detection limits of 5.6 × 10^-5,5.9 × 10^-5 and 13.2 × 10^-5 mol/L for MIP/AM/DVB, MIP/MAA/DVB and MIP/EMA/EGDMA membrane based sensors, respectively. Good selectivity was observed over common inorganic/organic anions. Validation of the assay method according to IUPAC recommendations was justified ensuring the synthesis of good reliable novel sensors for DCP determination. The method was successfully applied for routine analysis of food taint in fish and fish farms water samples.

Different expression levels of glycans on leukemic cells-a novel screening method with molecularly imprinted polymers (MIP) targeting sialic acid

Sialic acid (SA) is normally expressed on the cell membranes and is located at the terminal position of the sugar chains. SA plays an important role for regulation of the innate immunity, function as markers of the cells and can be recognized by a variety of receptors. Interestingly, the level of SA expression is increased on metastatic cancer cells. The availability of specific antibodies against SA is limited and, therefore, biomarker tools for detection of SA are lacking. We have recently presented a novel method for specific fluorescence labeling of SA molecular imprinted polymers (MIP). Here, we have performed an extended screening of SA expression by using SA-MIP and included four different chronic lymphocytic leukemia (CLL) cell lines, conveniently analyzed by flow cytometry and fluorescence microscopy. SA expression was detected in four cell lines at different levels, and the SA expression were verified with lectin-FITC. These results show that SA-MIP can be used as a plastic antibody for detection of SA using both flow cytometry and fluorescence microscopy. We suggest that SA-MIP can be used for screening of different tumor cells of various stages, including CLL cells.

Potential transducers based man-tailored biomimetic sensors for selective recognition of dextromethorphan as an antitussive drug

A biomimetic potentiometric sensor for specific recognition of dextromethorphan (DXM), a drug classified according to the Drug Enforcement Administration (DEA) as a "drug of concern", is designed and characterized. A molecularly imprinted polymer (MIP), with special molecular recognition properties of DXM, was prepared by thermal polymerization in which DXM acted as template molecule, methacrylic acid (MAA) and acrylonitrile (AN) acted as functional monomers in the presence of ethylene glycol dimethacrylate (EGDMA) as crosslinker. The sensors showed a high selectivity and a sensitive response to the template in aqueous system. Electrochemical evaluation of these sensors revealed near-Nernstian response with slopes of 49.6±0.5 and 53.4±0.5 mV decade(-1) with a detection limit of 1.9×10(-6), and 1.0×10(-6) mol L(-1) DXM with MIP/MAA and MIP/AN membrane based sensors, respectively. Significantly improved accuracy, precision, response time, stability, selectivity and sensitivity were offered by these simple and cost-effective potentiometric sensors compared with other standard techniques. The method has the requisite accuracy, sensitivity and precision to assay DXM in pharmaceutical products.