Online sample preconcentration techniques in nonaqueous capillary and microchip electrophoresis

One of the major drawbacks of electrophoresis in both capillary and microchip is the unsatisfactory sensitivity. Online sample preconcentration techniques can be regarded as the most common and powerful approaches commonly applied to enhance overall detection sensitivity. While the advances of various online preconcentration strategies in capillary and microchip employing aqueous background electrolytes are well-reviewed, there has been limited discussion of the feasible preconcentration techniques specifically developed for capillary and microchip using nonaqueous background electrolytes. This review provides the first consolidated overview of various online preconcentration techniques in nonaqueous capillary and microchip electrophoresis, covering the period of the last two decades. It covers developments in the field of sample stacking, isotachophoresis, and micellar-based stacking. Attention is also given to multi-stacking strategies that have been used for nonaqueous electrophoresis.

Chiral separation of four phenothiazines by nonaqueous capillary electrophoresis and quality by design-based method development for quantification of dextromepromazine as chiral impurity of levomepromazine

The separation of the enantiomers of mepromazine, promethazine, thioridazine and alimemazine was studied by nonaqueous capillary electrophoresis in the presence of cyclodextrins using 1 M acetic acid and 50 mM ammonium acetate in methanol as background electrolyte. Heptakis(2,3-di-O-acetyl-6-O-sulfo)-β-cyclodextrin, heptakis(2,3-di-O-methyl-6-O-sulfo)-β-cyclodextrin (HDMS-β-CD) and octakis(2,3-di-O-methyl-6-O-sulfo)-γ-cyclodextrin were the most effective chiral selectors for mepromazine, promethazine and alimemazine. Subsequently, a method for the determination of dextromepromazine as chiral impurity of levomepromazine was developed employing quality by design principles. Using HDMS-β-CD as selector, a fractional factorial resolution V+ design was employed for evaluating the knowledge space, while a central composite face centered design provided further method optimization and the basis for the computation of the design space by Monte Carlo simulations. The final experimental conditions included a 30/40.2 cm fused-silica capillary with 75 µm inner diameter and a background electrolyte composed of 0.75 M acetic acid and 55 mM ammonium acetate in methanol containing 27.5 mg/mL HDMS-β-CD. The applied voltage was 22 kV and the capillary temperature was 15°C. Following method robustness testing via a Plackett-Burman design, the method was validated for dextromepromazine in the range of 0.01 to 3.0 % relative to a concentration of 0.74 mg/mL levomepromazine and applied to the analysis of reference standards of the European Pharmacopoeia and commercial tablets. The assay also allowed the detection of levomepromazine sulfoxide although the quantitation of the compound was hampered by the poor peak shape of the late migrating diastereomer.

Enantioseparations in Nonaqueous Capillary Electrophoresis Using Charged Cyclodextrins

The enantioseparation of acidic and basic compounds can be successfully achieved in nonaqueous capillary electrophoresis (NACE) using single-isomer charged β-cyclodextrin (β-CD) derivatives of opposite charge to that of the analytes. This chapter describes how to separate the enantiomers of three basic substances selected as model compounds, i.e., alprenolol, bupranolol, and terbutaline, using the negatively charged heptakis(2,3-di-O-acetyl-6-O-sulfo)-β-CD (HDAS-β-CD). The enantiomers of three acidic drugs (tiaprofenic acid, suprofen, and flurbiprofen) are resolved using a monosubstituted amino β-CD derivative, namely 6-monodeoxy-6-mono(3-hydroxy)propylamino-β-CD (PA-β-CD).

Nonaqueous capillary electrophoresis mass spectrometry method for determining highly hydrophobic peptides

A nonaqueous capillary electrophoresis mass spectrometry (NACE-MS) method was developed to separate and determine highly hydrophobic temporin peptides. The nonaqueous background electrolyte solution was a mixture of 20% acetonitrile, 78% methanol and 2% formic acid, with 20 mM ammonium formate. The separation of six peptides was completed within 12 min. The CE system was connected to a triple quadrupole mass spectrometer operating in MRM mode using a chemical modifier solution of 2 mM ammonium formate in ethanol with the flow through microvial interface. The mass spectrometer offered a second dimension of separation for peptides having identical migration times but different structures. The new method represents the first system capable of reliably determining hydrophobic peptides without using reversed phase liquid chromatography mass spectrometry.

Highly sensitive wavelength-dependent nonaqueous capillary electrophoresis for simultaneous screening of various synthetic organic dyes

A novel multi-wavelength nonaqueous capillary electrophoresis (MW-NACE) technique based on wavelength-dependent laser-induced fluorescence (LIF) detection was investigated for the simultaneous screening of various synthetic organic dyes. Multi-wavelength excitation light sources were utilized to excite different organic dyes [e.g., 543 nm for crystal violet (CV), methyl violet B (MVB), methyl violet B base (MBB), rhodamine 6G (R6G), and rhodamine B base (RBB); 635 nm for nile blue A (NBA) and methylene blue (MB)] simultaneously. Using a nonaqueous buffer system composed of 15 mM sodium borate and 835 mM acetic acid in 100% ethanol (pH=5.4), all dyes were analyzed within 15 min with excellent resolution (R≥4.0) under an electric field of 500 V/cm. Calibration curves showed excellent linearity with square of correlation coefficients (r(2)) greater than 0.9908 over wide dynamic ranges of 0.4-50 μM for CV, 0.8-50 μM for MVB, 1.5-50 μM for MBB, 0.08-5 nM for R6G, 0.06-10 μM for MB, 0.02-10 μM for NBA, and 0.13-10 pM for RBB. The detection limits (S/N=3) of 40 fM to 0.5 μM were 10-200,000 times lower than those of previous detection methods. While adjacent peaks were not well distinguished with baseline separation in a single capillary, the devised technique was faster and more sensitive than conventional aqueous and nonaqueous CE approaches, thereby enabling the quantitative analysis of various dyes based on wavelength-dependent fluorescence detection with different excitation wavelengths.

Nonaqueous Capillary Electrophoresis Mass Spectrometry

The term nonaqueous capillary electrophoresis (NACE) commonly refers to capillary electrophoresis with purely nonaqueous background electrolytes (BGE). Main advantages of NACE are the possibility to analyze substances with very low solubility in aqueous media as well as separation selectivity that can be quite different in organic solvents (compared to water)-a property that can be employed for manipulation of separation selectivities. Mass spectrometry (MS) has become more and more popular as a detector in CE a fact that applies also for NACE. In the present chapter, the development of NACE-MS since 2004 is reviewed. Relevant parameters like composition of BGE and its influence on separation and detection in NACE as well as sheath liquid for NACE-MS are discussed. Finally, an overview of the papers published in the field of NACE-MS between 2004 and 2014 is given. Applications are grouped according to the field (analysis of natural products, biomedical analysis, food analysis, analysis of industrial products, and fundamental investigations).

Clarithromycin as a chiral selector for enantioseparation of basic compounds in nonaqueous capillary electrophoresis

The first use of macrolide antibiotic clarithromycin (CLM) in nonaqueous media for enantioseparation (partial or baseline) of the following compounds: alprenolol, atenolol, metoprolol, clenbuterol, methoxyphenamine, pindolol, propranolol, sotalol, synephrine, labetalol, and fenoterol is reported. Each analysis took less than 15 min. To find optimal separation conditions, some properties of CLM (adsorption, solubility), as well as the effect of experimental parameters on the enantioseparation of analytes (background electrolyte composition, chiral selector concentration, temperature, and applied voltage) were studied. The best chiral resolution was achieved in methanolic solution of 100 mM citric acid, 10 mM NaOH, 240-300 mM H3 BO3 , and 60-75 mM CLM. Using the proposed procedure, adsorption of CLM on the capillary wall was negligible and the repeatability of the migration times (RSD) was as good as 1.6%. For the analysis of propranolol, the linearity was achieved in the concentration range 2.5 × 10(-2) - 3.0 × 10(-1) mg/mL with the LODs (3 × S/N) being equal 2.6 × 10(-3) mg/mL and 2.8 × 10(-3) mg/mL for the first and the second enantiomers, respectively. Linear range for metoprolol enantiomers was 1.0 × 10(-2) -1.6 × 10(-1) mg/mL. The LODs (3 × S/N) were determined as 2.8 × 10(-3) and 3.0 × 10(-3) mg/mL for the first and the second enantiomers, respectively.

Analysis of five alkaloids using surfactant-coated multi-walled carbon nanotubes as the pseudostationary phase in nonaqueous capillary electrophoresis

In this paper, surfactant-coated multi-walled carbon nanotubes (SC-MWNTs) have been proposed as a novel pseudostationary phase (PSP) to enhance the separation of isoquinoline alkaloids in nonaqueous capillary electrophoresis (NACE). Several parameters affecting NACE separation were studied including the MWNT concentration, the electrolyte concentration, pH* and the separation voltage. In comparison to conventional NACE, the addition of an MWNT dispersion using surfactant solutions in the electrolyte produced an important enhancement in the resolution due to the π-π interactions between the analytes and the surface of the carbon nanotubes. Using SC-MWNTs (6μgmL(-1)) as a PSP in the background electrolyte (BGE) (i.e., 20mM sodium acetate in methanol-acetonitrile (80:20, v/v)) provided the complete separation of five alkaloids. Finally, the developed method has been successfully applied to the detection and quantification of the tested compounds of Rhizoma Coptidis.