High performance poly(L-lactic acid)-based film by one-step synthesis of poly (L-lactic acid-co-butylene itaconate-co-glycolic acid) for efficient preservation of yogurt storage

Biodegradable poly(L-lactic acid) (PLLA) has seldom used for dairy packaging due to medium permeability and brittleness. Novel PLLA copolymers, poly (L-lactic acid-co-butylene itaconate-co-glycolic acid) (PLBIGA), were developed by integrating glycolic acid (GA) and poly(butylene itaconate) (PBI) into PLLA's structure using low molecular weight PLLA as a key initiator. Then, packaging materials with better barrier and mechanical properties were obtained by blended PLBIGA with PLLA. Both PLLA/PLBIGA films and polyethylene nylon composite film (PE/NY) were used for stirred yogurt packaging and storage at 4 °C for 25 days. Results revealed that yogurt packed by PLLA/PLBIGA films maintained stabler water-holding capacity, color, and viscosity over the storage period. Moreover, the integrity of the gel structure and the total viable count of lactic acid bacteria in yogurt packaged in PLLA/40-PLBIGA8 were also found to be superior to those in PE/NY packages, highlighting its eco-friendly advantages in dairy packaging.

Functionalized Green Carbon dots for Specific Detection of Copper in Human Serum Samples and Living Cells

Intracellular copper ion (Cu2+) is irreplaceable and essential in regulation of physiological and biological processes, while excessive copper from bioaccumulation may cause potential hazards to human health. Hence, effective and sensitive recognition is urgently significant to prevent over-intake of copper. In this work, a novel highly sensitive and green carbon quantum dots (Green-CQDs) were synthesized by a low-cost and facile one-step microwave auxiliary method, which utilized gallic acid, carbamide and PEG400 as carbon source, nitrogen source and surface passivation agent, respectively. The decreased fluorescence illustrated excellent linear relationship with the increasing of Cu2+ concentration in a wide range. Substantial surface amino and hydroxyl group introduced by PEG400 significantly improved selectivity and sensitivity of Green-CQDs. The surface amino chelation mechanism and fluorescence internal filtration effect were demonstrated by the restored fluorescence after addition of EDTA. Crucially, the nanosensor illustrated good cell permeability, high biocompatibility and recovery rate, significantly practical application in fluorescent imaging and biosensing of intracellular Cu2+ in HepG-2 cells, which revealed a potential and promising biological applications in early diagnosis and treatment of copper ion related disease.

One-step fabrication of all-in-one three-dimensional porous polypyrrole/polydopamine structure for efficient solar vapor generation

High-quality solar evaporators with all-in-one design are highly desirable for vapor generation, but relevant research is scarce. In this study, a three-dimensional (3D) porous polypyrrole/polydopamine (PPY/PDA) structure was fabricated via a simple heating-assisted rapid oxidative polymerization method. The obtained evaporator has multiple features, and can simultaneously provide rapid water transport channels (average pore sizes ∼ 18.37 nm), low thermal conductivity (0.071 W m-1 K-1), high solar absorbance (97.08%), and good mechanical properties. When it is employed as an evaporator, the calculated water evaporation rate is approximately 2.12 kg m-2h-1, which is comparable to other reported 3D evaporators. Additionally, the evaporator displays great potential for purification toward various nonpotable water, as well as reliable pure water yields in an outdoor application (from 8:00 am to 5:00 pm, the evaporator can produce at least 13.95 L of drinkable water for a 1 m2 sample). We believe that the proposed strategy to fabricate all-in-one evaporators has great significance for scientific research and practical applications.

One-Step Synthesis of Transition Metal Dichalcogenide Quantum Dots Using Only Alcohol Solvents for Indoor-Light Photocatalytic Antibacterial Activity

In this study, we report a one-step direct synthesis of molybdenum disulfide (MoS₂) and tungsten disulfide (WS₂) quantum dots (QDs) through a solvothermal reaction using only alcohol solvents and efficient Escherichia coli (E. coli) decompositions as photocatalytic antibacterial agents under visible light irradiation. The solvothermal reaction gives the scission of molybdenum-sulfur (Mo-S) and tungsten-sulfur (W-S) bonding during the synthesis of MoS₂ and WS₂ QDs. Using only alcohol solvent does not require a residue purification process necessary for metal intercalation. As the number of the CH₃ groups of alcohol solvents among ethyl, isopropyl, and tert(t)-butyl alcohols increases, the dispersibility of MoS₂/WS₂ increases. The CH₃ groups of alcohols minimize the surface energy, leading to the effective exfoliation and disintegration of the bulk under heat and pressure. The bulky t-butyl alcohol with the highest number of methyl groups shows the highest exfoliation and yield. MoS₂ QDs with a lateral size of about 2.5 nm and WS₂ QDs of about 10 nm are prepared, exhibiting a strong blue luminescence under 365 nm ultraviolet (UV) light irradiation. Their heights are 0.68-3 and 0.72-5 nm, corresponding to a few layers of MoS₂ and WS₂, respectively. They offer a highly efficient performance in sterilizing E. coli as the visible-light-driven photocatalyst.

Synthesis and luminescence monitoring of iridium(III) complex-functionalized gold nanoparticles and their application for determination of gold(III) ions

A new method is presented for the one-step synthesis and real-time monitoring of iridium(III) complex-functionalized AuNPs from the precursor gold(III) chloride (AuCl₃). The functionalized AuNPs with an average size of 8 - 20 nm were obtained by the reduction of Au³⁺ ions by the alkyne group of iridium(III) complexes, which was accompanied by the anchoring iridium(III) complexes on the surface of the nanoparticles. Meanwhile, the luminescence of the iridium(III) complexes was effectively quenched due to distance-dependent fluorescence quenching by AuNPs, thereby enabling luminescence monitoring of the formation process of the functionalized AuNPs and obtaining scattering information and spectral information in real time. Moreover, this method was applied to the determination of Au³⁺ ions in buffer with a limit of detection of 0.38 μM at 700 nm in luminescence mode, while the detection limit for absorbance was 10.04 μM. Importantly, the multimodal detection strategy alleviates interference from other metal ions. Furthermore, the iridium(III) alkyne complexes were capable of imaging mitochondrial Au³⁺ ions in living cells. Taken together, this work opens a new avenue for convenient synthesis and monitoring formation of functionalized AuNPs, and also provides a tool for selective determination of Au³⁺ ions in solution and in cellulo.

Facile one-step synthesis of PhC2Cu nanowires with enhanced photocatalytic performance

In recent years, the research of phenylethynylcopper (PhC₂Cu) in photocatalysis has attracted immense attention. However, its synthesis requires two steps extending over 9 days. In this paper, the successful preparation of PhC₂Cu nanowires is reported using a highly rapid and facile one-step method directly using copper acetate and phenylacetylene as raw materials and ascorbic acid as reducing agent. The kinetic studies indicated that the synthetic reaction follows a pseudo-second-order equation through electrical conductivity. Comparative studies of the crystal structures, morphologies, and optical properties of PhC₂Cu prepared by the traditional two-step and the current one-step methods were conducted using XRD, SEM, UV-Vis Drs, FT-IR, Raman spectra, and photocurrent. Meanwhile, the PhC₂Cu nanowires exhibited excellent photocatalytic activity to degrade methyl violet (MV) and glyphosate. This facile and rapid method dramatically improves the preparation efficiency of PhC₂Cu, and the obtained PhC₂Cu also shows higher photocatalytic activity. This remarkable progress enables the possibility of large-scale and efficient preparation of PhC₂Cu with high photocatalytic activity, indicating their excellent application prospect in photocatalysis.

Novel heterostructured metal doped MgFe2O4@g-C3N4 nanocomposites with superior photo-Fenton preformance for antibiotics removal: One-step synthesis and synergistic mechanism

A novel metal doped MgFe₂O₄@g-C₃N₄ (m-MF@CN) nanocomposite was synthesized by one-pot method using saprolite laterite nickel ore and urea as raw materials. The heterostructure was verified as an effective heterogeneous Fenton-like catalyst for degrading antibiotics including tetracycline, oxytetracycline and chlortetracycline hydrochloride, and the related catalytic mechanism was elaborated in detail. Under the optimum conditions, the m-MF@CN/H₂O₂/vis system exhibited superior photo-Fenton property (degradation efficiency of 93.15% within 30 min, TOC removal efficiency was as high as 60.54% within 120 min) and cycle stability for tetracycline removal. The combination of MgFe₂O₄ and g-C₃N₄ enhanced the absorption of visible light, and the energy level matched heterojunction promoted the separation of photogenerated electron-holes to accelerate the redox cycle of ≡Fe³⁺/≡Fe²⁺. Free radical quenching and electron spin resonance (ESR) analysis confirmed that O₂^- was the main active species, h⁺ and OH also played a synergistic role in the degrading reactions. Notably, a possible degradation pathway of tetracycline was proposed according to the intermediates produced in the reaction process. The one-step synthesized m-MF@CN nanocomposite catalysts possessed high catalytic performance, good stability and recoverability, which not only realized the high-value utilization of ore raw materials, but also provided a potential practical way for efficient treatment of antibiotic wastewater.

Facile one-step strategy for the formation of BiOIO3/[Bi6O6(OH)3](NO3)3·1.5H2O heterojunction to enhancing photocatalytic activity

The heterojunction photocatalyst, BiOIO₃/[Bi₆O₆(OH)₃](NO₃)₃·1.5H₂O (BiOIO₃/BBN), was successfully synthesized by a simple one-step hydrothermal method. The results showed that under UV light irradiation, the formation of a heterojunction could greatly enhance the photocatalytic efficiency of the prepared catalyst for bisphenol A (BPA). The BiOIO₃/BBN heterostructure had the best reaction rate constant, which was 81.82 times, 1.52 times, and 43.40 times improvement of TiO₂, BiOIO₃, and BBN respectively. Through the free radical capture experiments and electron spin resonance spectroscopy, it was conducted that ¹O₂, h⁺, e^-, •OH and •O₂^- were reactive species in the process of photocatalytic degradation of BPA. The photocatalytic mechanism was further investigated and confirmed that the BiOIO₃/BBN heterojunction could improve the separation and transfer of photo-generated carriers, thereby greatly enhancing the catalytic efficiency. The degradation products of BPA were detected by HPLC-MS, and the degradation reaction pathway was deduced.

One-step synthesis by redox co-precipitation method for low-dimensional Me-Mn bi-metal oxides (Me=Co, Ni, Sn) as SCR DeNOx catalysts

In this research, one-step synthesis of redox co-precipitation method (using sodium lauryl sulfate, KMnO₄, and metal precursor) was well applicable in universally preparing low-dimensional Me-MnOx nanosheet catalysts with different metal doping (Me=Co, Ni, or Sn). NH₃-SCR activity was explored to the relationship with structure morphology and physio-chemical properties via the characterization techniques of SEM, XRD, XPS, H₂-TPR, and NH₃-TPD. It was found that Ni-MnOx has a relatively poor activity at low-down temperature but was improved as the reaction temperature rising. Co-MnOx presented a relatively stable catalytic activity of which the NOx conversion rate can be maintained 80~90% in a wide temperature window of 100-250 °C with relatively better N₂ selectivity. Compared with Co- or Ni-modified MnOx, Sn-MnOx catalyst has an excellent low-temperature catalytic activity (93% NOx conversion at 100 °C) that was maintained > 80% before 200 °C but with poor selectivity to N₂. Due to its nanosheet-structured solid solution structure, Sn-MnOx promoted the interaction between MnOx and SnO₂ with the increased contents of adsorbed oxygen and also the numbers of surface Lewis acid sites, which integrally promoted the NH₃-SCR reaction at low temperature and also contributed to an acceptable resistances to water and sulfur. High content of adsorbed oxygen was beneficial to improve the catalytic activity at lower temperatures, while the electron cycle interaction of different metal valence ions will play a more important role with the increase of reaction temperature.

Co- or Ni-modified Sn-MnOx low-dimensional multi-oxides for high-efficient NH3-SCR De-NOx: Performance optimization and reaction mechanism

NH₃-SCR performances were explored to the relationship between structure morphology and physio-chemical properties over low-dimensional ternary Mn-based catalysts prepared by one-step synthesis method. Due to its strong oxidation performance, Sn-MnOx was prone to side reactions between NO, NH₃ and O₂, resulting in the generation of more NO₂ and N₂O, here most of N₂O was driven from the non-selective oxidation of NH₃, while a small part generated from the side reaction between NH₃ and NO₂. Co or Ni doping into Sn-MnOx as solid solution components obviously stronged the electronic interaction for actively mobilization and weakened the oxidation performance for signally reducing the selective tendency of side reactions to N₂O. The optimal modification resulted in improving the surface area and enhancing the strong interaction between polyvalent cations in Co/Ni-Mn-SnO₂ to provide more surface adsorbed oxygen, active sites of Mn³⁺ and Mn⁴⁺, high-content Sn⁴⁺ and plentiful Lewis-acidity for more active intermediates, which significantly broadened the activity window of Sn-MnOx, improved the N₂ selectivity by inhibiting N₂O formation, and also contributed to an acceptable resistances to water and sulfur. At low reaction temperatures, the SCR reactions over three catalysts mainly obeyed the typical Elye-rideal (E-R) routs via the reactions of adsorbed l-NHx (x = 3, 2, 1) and B-NH₄⁺ with the gaseous NO to generate N₂ but also N₂O by-products. Except for the above basic E-R reactions, as increasing the reaction temperature, the main adsorbed NOx-species were bidentate nitrates that were also active in the Langmuir-Hinshelwood reactions with adsorbed l-NHx species over Co/Ni modified Mn-SnO₂ catalyst.

Controlling morphology evolution of titanium oxide-gold nanourchin for photocatalytic degradation of dyes and photoinactivation of bacteria in the infected wound

We report a one-pot, room-temperature, morphology-controlled synthesis of titanium oxide (TiO_x)-gold nanocomposites (TiO_x-Au NCs) using HAuCl₄ and TiCl₃ as precursors, and catechin as reducing agent. TiO_x-Au NCs have a range of morphologies from star-like to urchin-like shape depending on the concentration of TiCl₃ in the reaction mixture. The urchin-shaped TiO_x-Au NCs exhibited excellent photocatalytic activity toward dye degradation due to strong light absorption, plasmon-induced excitation, high conductivity of the gold, and reduced hole-electron pair recombination. TiO_x-Au NCs have the advantage of a wide range of light absorption and surface plasmon absorption-mediated excitation due to their abundant gold spikes, which enabled the degradation of dyes over 97% in 60 min, using a xenon lamp as a light source. In addition, TiO_x-Au NCs are highly efficient for the photoinactivation of Escherichia coli and methicillin-resistant Staphylococcus aureus (MRSA), and Candida albicans through the photodynamic generation of reactive oxygen species (ROS) and damage to the bacterial membrane. The catechin derivatives on the NCs effectively promoted curing MRSA infected wounds in rats through inducing collagen synthesis, migration of keratinocytes, and neovascularization.

Hydrophobization of arabinoxylan with n-butyl glycidyl ether yields stretchable thermoplastic materials

Hemicelluloses are regarded as one of the first candidates for the development of value-added materials due to their renewability, abundance, and functionality. However, because most hemicelluloses are brittle, they can only be processed as a solution and cannot be processed using industrial melt-based polymer processing techniques. In this study, arabinoxylan (AX) was hydrophobized by incorporating butyl glycidyl ether (BuGE) into the hydroxyl groups through the opening of the BuGE epoxide ring, yielding alkoxy alcohols with terminal ethers. The formed BuGE derivatives were melt processable and can be manufactured into stretchable thermoplastic films through compression molding, which has never been done before with hemicellulose modified in a single step. The structural and thermomechanical properties of the one-step synthesis approach were compared to those of a two-step synthesis with a pre-activation step to demonstrate its robustness. The strain at break for the one-step synthesized AX thermoplastic with 3 mol of BuGE is ≈200%. These findings suggest that thermoplastic polymers can be composited with hemicelluloses or that thermoplastic polymers made entirely of hemicelluloses can be designed as packaging and stretchable electronics supports.

One-step synthesis of nitrogen-defective graphitic carbon nitride for improving photocatalytic hydrogen evolution

Defects are significant for graphitic carbon nitride (g-C₃N₄, CN) in photocatalytic applications. Defective CN not only accelerate charge separation but also extend spectral response. Engineering carbon or nitrogen defects in CN has been achieved by variety of strategies, but it is still a long-term interest to develop a simple and controllable route for engineering defects in CN. Herein, we present tuning the nitrogen defects in CN by either changing the heating rate or prolonging the pyrolysis time during polymerization melamine sulfate. It was found that either lower heating rate or longer pyrolysis time lead to the formation of more N vacancies and suspended terminal amino. As a result, an optimal photocatalytic H₂ yield rate (λ > 420 nm) of 905 μmol g^-1 h^-1 was reached, which was 2 times higher than that of CN prepared with a heating rate of 1 °C/min and pyrolysis at 600 °C for 4 h.

Application of pyridine-modified chitosan derivative for simultaneous adsorption of Cu(II) and oxyanions of Cr(VI) from aqueous solution

The bioadsorbent C1, which is a chitosan derivative prepared in a one-step synthesis, was successfully used to adsorb Cr(VI) and Cu(II) simultaneously. Here, for the first time the simultaneous adsorption of a cation and an anion was modeled using the Corsel model for kinetics and the Real Adsorbed Solution Theory model for equilibrium data. Batch studies of the adsorption of Cu(II) and Cr(VI) in single and binary aqueous solutions were performed as a function of initial solute concentration, contact time, and solution pH. The maximum adsorption capacities of C1 in single and binary aqueous solutions were 1.84 and 1.13 mmol g^-1 for Cu(II) and 3.86 and 0.98 mmol g^-1 for Cr(VI), respectively. The reuse of C1 was investigated, with Cu(II) ions being almost completely desorbed and fully re-adsorbed. For Cr(VI), the desorption was incomplete resulting in a lower re-adsorption. Energy-dispersive X-ray spectroscopy was used for mapping the distributions of Cr(VI) and Cu(II) adsorbed on the C1 surface in single and binary adsorption systems. Isothermal titration calorimetry experiments were performed for Cr(VI) and Cu(II) adsorption in single solutions. The thermodynamic parameters of adsorption showed that the adsorption of both metal ions was enthalpically driven, but entropically unfavorable.

One-step preparation of well-dispersed spindle-like Fe2O3 nanoparticles on g-C3N4 as highly efficient photocatalysts

Photocatalysis has attracted wide attention due to its outstanding advantages in dealing with sewage. And compounds of metal oxides and g-C₃N₄ that possess Z-type heterojunctions have become the star photocatalysts in degrading pollutants. In this paper, a novel one-step method for the preparation of highly efficient photocatalyst of Fe₂O₃/g-C₃N₄, using Fe (NO₃)₃ and urea as raw materials, is described. Under the optimized condition, the one-step synthesized photocatalyst of FeGCN-0.10 showed higher photocatalytic performance compared with the multi-step prepared photocatalyst, and the rate of removing basic fuchsin was 92% (210 min), which was 19.5% higher than that of the latter. Furthermore, different methods were also applied for characterizing Fe₂O₃/g-C₃N_4. Structural characterization results confirmed the composites of Fe₂O₃/g-C₃N₄. Morphological characterization results showed that spindle-like Fe₂O₃ particles were distributed more evenly on the layered g-C₃N₄ compared with the impregnation method. Optical characterization results demonstrated the high intensity of the separated photo-generated electron-hole pairs and of Fe₂O₃/g-C₃N₄, which uncovered the removing mechanism of basic fuchsin.

Facile one-step synthesis of 3D hierarchical flower-like magnesium peroxide for efficient and fast removal of tetracycline from aqueous solution

Hierarchically three dimensional (3D) flower-like magnesium peroxide (MgO₂) nanostructures were synthesized through a facile one-step precipitation method. The effects of magnesium salt, reaction temperature, precipitant and surfactant on the morphology and structure of MgO₂ were systematically investigated. The as-obtained samples using magnesium sulfate, ammonia and trisodium citrate were composed of 3D flowers assembled by numerous nanosheets, and SO₄^2- played a vital role in the formation of flower-like nanostructures. The 3D flower-like MgO₂ possessed high active oxygen content of 24.10 wt% and large specific surface area of 385 m²/g. Ten mg of flower-like MgO₂ could efficiently degrade 90 % of tetracycline (TC) within 60 min under stirring condition. ESR tests and radical quenching experiments suggested that hydroxyl radicals were crucial for TC degradation. Moreover, the column filled with flower-like MgO₂ could quickly and efficiently eliminate TC with the assistance of air flow, and the degradation efficiency almost had no decrease even after twenty consecutive runs. Significantly, the concentrations of magnesium and iron ions dissolved in the filtrate from the column were far below the limits of drinking water standards. Additionally, the possible degradation pathways of TC were also proposed according to the determination of generated intermediates during the degradation process.

One-step green preparation of magnetic seaweed biochar/sulfidated Fe0 composite with strengthen adsorptive removal of tetrabromobisphenol A through in situ reduction

Rare information is available on the facile preparation of biochar/sulfidated Fe⁰ composite. A facile one-step green method was established for the synthesis of magnetic seaweed (Ulva prolifera) biochar/sulfidated Fe⁰ composite (S-Fe⁰/BC) to use excessive seaweed biomass. Removal efficiency of tetrabromobisphenol A (TBBPA) reached up to 88% in iron-sulfur treatment. Two major products were identified as bisphenol A and monobromobisphenol A, confirming the in-situ reductive debromination of TBBPA. Batch experiments showed that the removal of TBBPA was facilitated with S/Fe molar ratio of 0.2 and acidic conditions (pH = 3-7). The S-Fe⁰/BC composite had good stability and reusability based on the cycle experiments. The removal process of TBBPA by S-Fe⁰/BC composite might include chemical adsorption by S-Fe⁰/BC composite, reduction debromination by S-Fe⁰ and enhanced electron transfer. The environmentally-friendly S-Fe⁰/BC composite synthesized by one-step facile procedure showed novel potential applications in terms of pollution control of halogenated xenobiotic compounds such as TBBPA.

Ultrathin dodecyl-sulfate-intercalated Mg-Al layered double hydroxide nanosheets with high adsorption capability for dye pollution

A high-performance dye adsorbent of ultrathin dodecyl-sulfate (DS^-) intercalated Mg-Al layered double hydroxide nanosheets (DI-LDH Ns) were controllably synthesized by a simple one-step surfactant-assisted hydrothermal method. The unique intercalated structure with week interlayer interaction and high accessible surface of DI-LDH Ns provide efficient adsorption of methyl orange (MO), leading to its superior performance with much higher uptake capability (846.6 mg/g at 298 K) and less adsorbing equilibrium time (5 min) than those of ultrathin DS^--surface-modified Mg-Al-LDH nanosheets (DM-LDH Ns, 327.4 mg/g at 298 K, 120 min) and original Mg-Al-LDH (O-LDH, 208.2 mg/g at 298 K, 120 min). The composition and structure of these LDHs were investigated by systematic physicochemical characterization, such as XRD, TEM, FT-IR, BET and TGA. The adsorption behavior of DI-LDH Ns follows the Langmuir isotherm equation. A plausible mechanism is proposed to explain the adsorption process of such DI-LDH Ns, in which the synergistic contributions of surface and interlayer adsorption between DI-LDH Ns and MO play an important role. This study puts forward a new thought for the development of high-performance LDH adsorbents with an ultrathin intercalated structure for the efficient and rapid removal of dyes.

Mechanism and impact of synthesis conditions on the one-step green synthesis of hybrid RGO@Fe/Pd nanoparticles

While a one-step green synthesis of a hybrid material composed of reduced graphene oxide and bimetallic Fe/Pd nanoparticles (RGO@Fe/Pd NPs) was previously successfully reported and evaluated for the removal of organic contaminants, the relationship between the formation of RGO@Fe/Pd and the resulting reactivity was unclear. In this paper the impact of the specific synthetic conditions on the reactivity of RGO@Fe/Pd was investigated in order to enhance the removal efficiency of antibiotics such as rifampicin. The hybrid material (RGO@Fe/Pd) successfully removed 96.1% of rifampicin compared to only 63.5 and 81.0% for Fe nanoparticles and RGO, respectively. The best synthetic conditions for the formation of RGO@Fe/Pd included GO/Fe = 1:1 and Fe/Pd = 100: 5. In addition, GC-MS and FTIR were used to identify the main reducing biomolecules in the green tea extract responsible for the one-step synthesis of RGO@Fe/Pd as Catechol, Caffeine, 1,3,5-Benzenetriol. The morphology, size and surface composition of RGO@Fe/Pd was characterized by Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), X-Ray powder diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). These advanced characterization techniques suggested that during synthesis GO was initially converted to RGO, and thereafter Fe/Pd NPs (10-50 nm) were dispersed on RGO. Finally, a plausible formation mechanism for the one-step synthesis of the hybrid material was proposed.

One-step synthesis of Pt/a-CoOx core/shell nanocomposites

Herein, we synthesize a core/shell Pt/a-CoO_x nanocomposite via one-step synthesis using a strong reaction agent of borane t-butylamine(BBA) at 200 °C. Transmission electron microscopy study shows that the morphology of nanocomposites is controlled by the stirring time and perfect core/shell structure is formed with over 7 days stirring time.

Two-dimensional copper-based metal-organic frameworks nano-sheets composites: One-step synthesis and highly efficient U(VI) immobilization

In this study, a new kind of thin 2D MOFs nano-sheets (MNS) was successfully prepared through complexation between 2-methylimidazole and Cu(II) by a one-step, and cost-effective route. The structural morphologies can be tuned by adjusting the ratio of MeOH/H₂O. The synthesized MNS (MNS-1, MNS-2, MNS-3 and MNS-4) were fully characterized and the results indicated that the synthesized MNS were freestanding and possess micro-sized lateral dimensions and nanoscale thickness of sub-25 nm. All the obtained MNS display great performance with the adsorption capacity hierarchy of MNS-2 (591.79 mg·g^-1) > MNS-3 (409.49 mg·g^-1) > MNS-4 (387.07 mg·g^-1) > MNS-1 (384.84 mg·g^-1) at pH ˜ 6.0, and 298 K. The thermodynamic parameters indicated the exothermic and spontaneous nature of U(VI) immobilization. The U(VI) immobilization mechanism was achieved through the complexation between U(VI) and C-N(H) /-OH groups. This work supplies a facile and purposeful approach for developing 2D MOFs nano-sheets toward a highly efficient immobilization of U(VI), and it also promotes the preparation of structure-based design of nanomaterials for radionuclide-containing-medium pretreatment.

Synthesis and biological evaluation of neoglycosphingolipids

Various neoglycosphingolipids were efficiently synthesized in a one-step reaction by the coupling of free sugars with an N-alkylaminooxy-functionalized ceramide analogue. The bioactivity studies demonstrated that most of these compounds could upregulate the expression of matrix metalloproteinase-9 (MMP-9, extracellular matrix proteins associated with tumor migration) in murine melanoma B16 cells in a similar manner to the natural ganglioside monosialodihexosylganglioside (GM3), which highlights the potential use of these neoglycosphingolipids as inhibitors of tumor migration.

Analysis of penicillamine using Cu-modified graphene quantum dots synthesized from uric acid as single precursor

A simple methodology was developed to quantify penicillamine (PA) in pharmaceutical samples, using the selective interaction of the drug with Cu-modified graphene quantum dots (Cu-GQDs). The proposed strategy combines the advantages of carbon dots (over other nanoparticles) with the high affinity of PA for the proposed Cu-GQDs, resulting in a significant and selective quenching effect. Under the optimum conditions for the interaction, a linear response (in the 0.10–7.50 µmol/L PA concentration range) was observed. The highly fluorescent GQDs used were synthesized using uric acid as single precursor and then characterized by high resolution transmission electron microscopy, Raman spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, fluorescence, and absorption spectroscopy. The proposed methodology could also be extended to other compounds, further expanding the applicability of GQDs.

Shape-controlled synthesis of porous AuPt nanoparticles and their superior electrocatalytic activity for oxygen reduction reaction

Control of structure and morphology of Pt-based nanomaterials is of great importance for electrochemical energy conversions. In this work, we report an efficient one-step synthesis of bimetallic porous AuPt nanoparticles (PAuPt NPs) in an aqueous solution. The proposed synthesis is performed by a simple stirring treatment of an aqueous reactive mixture including K₂PtCl₄, HAuCl₄, Pluronic F127 and ascorbic acid at a pH value of 1 without organic solvent or high temperature. Due to their porous structure and bimetallic composition, as-made PAuPt NPs exhibit excellent electrocatalytic activity for oxygen reduction reaction.

One-step green synthesis of non-hazardous dicarboxyl cellulose flocculant and its flocculation activity evaluation

The waste management of used flocculants is a thorny issue in the field of wastewater treatment. To natural cellulose based flocculants, utilization of hazardous cellulose solvent and simplification of synthetic procedure are the two urgent problems needing to be further improved. In this work, a series of natural dicarboxyl cellulose flocculants (DCCs) were one-step synthesized via Schiff-base route. The cellulose solvent (NaOH/Urea solution) was utilized during the synthesis process. The full-biodegradable flocculants avoid causing secondary pollution to environment. The chemical structure and solution property of the DCC products were characterized by FT-IR, (1)H NMR, (13)C NMR, TGA, FESEM, charge density and ζ-potential. Kaolin suspension and effluent from paper mill were selected to evaluate the flocculation activity of the DCCs. Their flocculation performance was compared with that of commercial cationic polyacrylamide and poly aluminium chloride flocculants. The positive results showed that the NaOH/Urea solvent effectively promoted the dialdehyde cellulose (DAC) conversion to DCC in the one-step synthesis reaction. The DCCs with the carboxylate content more than 1 mmol/g exhibited steady flocculation performance to kaolin suspension in the broad pH range from 4 to 10. Its flocculation capacity to the effluent from paper mill also showed excellent.

A one-step short-time synthesis of Ag@SiO2 core-shell nanoparticles

A performance of shell-thickness precise control in silver-silica coating core-shell nanoparticles is presented. 60nm sized citrate-stabilized silver nanoparticles are directly silica coated using a modified Stöber process. Tetraethyl orthosilicate is used as a silica precursor and ammonium hydroxide as catalyst in an alcoholic solvent to promote the seeded silica growth. By simply varying the synthesis reaction time from 4 to 60min, the silica shell thickness is increased from 5.1nm to 76.4nm. This well-controlled synthesis is then transposed to 40, 80 and 100nm sized silver cores in order to show the independence of the silica shell growth on the nanoparticle core size. Optical properties, i.e. localized surface plasmon resonance, of the produced silver-silica core-shell are also investigated.

One-step synthesis and applications of fluorescent Cu nanoclusters stabilized by L-cysteine in aqueous solution

Herein, an innovative and simple strategy for synthesizing high fluorescent Cu nanoclusters was successfully established while L-cysteine played a role as the stabilizer. Meaningfully, the current Cu nanoclusters together with a quantum yield of 14.3% were prepared in aqueous solution, indicating their extensive applications. Subsequently, the possible fluorescence mechanism was elucidated by fluorescence, UV-vis, HR-TEM, FTIR, XPS, and MS. Additionally, the CuNCs were employed for assaying Hg(2+) on the basis of the interactions between Hg(2+) and L-cysteine; thus facilitating the quenching of their fluorescence. The proposed analytical strategy permitted detections of Hg(2+) in a linear range of 1.0×10(-7) mol L(-1)×10(-3) mol L(-1), with a detection limit of 2.4×10(-8) mol L(-1) at a signal-to-noise ratio of 3. Significantly, this CuNCs described here were further applied for coding and fluorescent staining, suggesting may broaden avenues toward diverse applications.

Cu2ZnSnSe4 nanocrystals capped with S(2-) by ligand exchange: utilizing energy level alignment for efficiently reducing carrier rec ombination

In this work, we employed a convenient one-step synthesis method for synthesizing Cu2ZnSnSe4 (CZTSe) nanocrystals (NCs) in an excess selenium environment. This excess selenium situation enhanced the reaction of metal acetylacetonates with selenium, resulting in the burst nucleation of NCs at relatively low temperatures. The phase morphology and surface and optoelectronic properties of NCs before and after ligand exchange were discussed in depth. It was found that pure tetragonal-phase structure CZTSe NCs with approximately 1.7-eV bandgap could be synthesized. The removal of large organic molecules on CZTSe NCs after ligand exchange by S(2-) decreased the resistivity. The bandgap of the films after ligand exchange by 550°C selenization was also decreased due to better crystallinity. For potential application in CZTSe solar cells, we constructed an energy level diagram to explain the mutual effect between the absorption layer and CdS layer. Using cyclic voltammetry (CV) measurement, we found that the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of CZTSe films shifted down after ligand exchange. After energy level alignment at the CdS/CZTSe interface, a type I band alignment structure was more conveniently formed after ligand exchange. This structure acted as the barrier against injection electrons from ZnO to the CZTSe layer, and recombination would subsequently be depressed.