On the total albumin losses during haemocatharsis

Excessive albumin losses during HC (haemocatharsis) are considered a potential cause of hypoalbuminemia-a key risk factor for mortality. This review on total albumin losses considers albumin "leaking" into the dialysate and losses due to protein/membrane interactions (i.e. adsorption, "secondary membrane formation" and denaturation). The former are fairly easy to determine, usually varying at the level of ~ 2 g to ~ 7 g albumin loss per session. Such values, commonly accepted as representative of the total albumin losses, are often quoted as limits/standards of permissible albumin loss per session. On albumin mass lost due to adsorption/deposition, which is the result of complicated interactions and rather difficult to determine, scant in vivo data exist and there is great uncertainty and confusion regarding their magnitude; this is possibly responsible for neglecting their contribution to the total losses at present. Yet, many relevant in vitro studies suggest that losses of albumin due to protein/membrane interactions are likely comparable to (or even greater than) those due to leaking, particularly in the currently favoured high-convection HDF (haemodiafiltration) treatment. Therefore, it is emphasised that top research priority should be given to resolve these issues, primarily by developing appropriate/facile in vivo test-methods and related analytical techniques.

Directed proton transfer from Fo to F1 extends the multifaceted proton functions in ATP synthase

The role of protons in ATP synthase is typically considered to be energy storage in the form of an electrochemical potential, as well as an operating element proving rotation. However, this review emphasizes that protons also act as activators of conformational changes in F1 and as direct participants in phosphorylation reaction. The protons transferred through Fo do not immediately leave to the bulk aqueous phase, but instead provide for the formation of a pH gradient between acidifying Fo and alkalizing F1. It facilitates a directed inter-subunit proton transfer to F1, where they are used in the ATP synthesis reaction. This ensures that the enzyme activity is not limited by a lack of protons in the alkaline mitochondrial matrix or chloroplast stroma. Up to one hundred protons bind to the carboxyl groups of the F1 subunit, altering the electrical interactions between the amino acids of the enzyme. This removes the inhibition of ATP synthase caused by the electrostatic attraction of charged amino acids of the stator and rotor and also makes the enzyme more prone to conformational changes. Protonation occurs during ATP synthesis initiation and during phosphorylation, while deprotonation blocks the rotation inhibiting both synthesis and hydrolysis. Thus, protons participate in the functioning of all main components of ATP synthase molecular machine making it effectively a proton-driven electric machine. The review highlights the key role of protons as a coupling factor in ATP synthase with multifaceted functions, including charge and energy transport, torque generation, facilitation of conformational changes, and participation in the ATP synthesis reaction.

Using modern approaches to sedimentation velocity to detect conformational changes in proteins

It has been known for decades that proteins undergo conformational changes in response to binding ligands. Such changes are usually accompanied by a loss of entropy by the protein, and thus conformational changes are integral to the thermodynamics of ligand association. Methods to detect these alterations are numerous; here, we focus on the sedimentation velocity (SV) mode of AUC, which has several advantages, including ease of use and rigorous data-selection criteria. In SV, it is assumed that conformational changes manifest primarily as differences in the sedimentation coefficient (the s-value). Two methods of determining s-value differences were assessed. The first method used the widely adopted c(s) distribution to gather statistics on the s-value differences to determine whether the observed changes were reliable. In the second method, a decades-old technique called "difference SV" was revived and updated to address its viability in this era of modern instrumentation. Both methods worked well to determine the extent of conformational changes to three model systems. Both simulations and experiments were used to explore the strengths and limitations of the methods. Finally, software incorporating these methodologies was produced.

Network analysis of dynamically important residues in protein structures mediating ligand-binding conformational changes

According to the generalized conformational selection model, ligand binding involves the co-existence of at least two conformers with different ligand-affinities in a dynamical equilibrium. Conformational transitions between them should be guaranteed by intramolecular vibrational dynamics associated to each conformation. These motions are, therefore, related to the biological function of a protein. Positions whose mutations are found to alter these vibrations the most can be defined as key positions, that is, dynamically important residues that mediate the ligand-binding conformational change. In a previous study, we have shown that these positions are evolutionarily conserved. They correspond to buried aliphatic residues mostly localized in regular structured regions of the protein like β-sheets and α-helices. In the present paper, we perform a network analysis of these key positions for a large dataset of paired protein structures in the ligand-free and ligand-bound form. We observe that networks of interactions between these key positions present larger and more integrated networks with faster transmission of the information. Besides, networks of residues result that are robust to conformational changes. Our results reveal that the conformational diversity of proteins seems to be guaranteed by a network of strongly interconnected key positions rather than individual residues.

Phosphorylation-induced conformational changes of photoactivated rhodopsin probed by fluorescent labeling at Cys140 and Cys316

In order to monitor conformational changes following photoactivation and phosphorylation of bovine rhodopsin, the two reactive sulfhydryl groups at Cys¹⁴⁰ and Cys³¹⁶ were specifically labeled with the monobromobimane (mBBr) fluorophore. Although alterations in conformation after light exposure of rhodopsin were not detected by fluorescence excitation scans (300-450 nm) of the mBBr-labeled protein, the fluorescence signal was reduced ∼ 90% in samples containing photoactivated phosphorhodopsin. Predominant labeling at either Cys¹⁴⁰ or Cys³¹⁶ in light-activated and phosphorylated rhodopsin merely generated a decrease of ∼38% and 28%, respectively, in the fluorescence excitation intensity. Thus, neither mBBr-modified Cys¹⁴⁰ nor mBBr-modified Cys³¹⁶ were involved single-handedly in the remarkable fall seen on the signal following phosphorylation of the protein; rather, the incorporation of phosphate groups on the mBBr-labeled light-activated rhodopsin appeared to affect its fluorescence signal in a cooperative or synergistic manner. These findings demonstrated that the phosphorylation of specific hydroxyl groups at the carboxyl terminal tail of rhodopsin causes definite conformational changes in the three-dimensional fold of the protein. Apparently, amino acid residues that are buried in the interior of the inactive protein become accessible following illumination and phosphorylation of rhodopsin, quenching in turn the fluorescence excitation signal of mBBr-modified rhodopsin.

Applications of high pressure to pre-rigor rabbit muscles affect the water characteristics of myosin gels

Myosin was extracted immediately after high-pressure treatment (HP, 100-300MPa for 15 or 180s) to pre-rigor rabbit muscles (PRRMs) for evaluating the influences of HP-treatment on gel properties, using untreated muscles as Controls. Assessment of myosin yields, water-holding capacity (WHC), water mobility and distribution demonstrated that HP modified myosin before its extraction. Myosin gels subjected to HP at 100MPa 180s and 200MPa 15s had enhanced WHC compared with Controls. Also, the highest proportion of immobile-water was observed in myosin gels treated at 200MPa for 15s. HP-treatment of PRRMs affected their physicochemical properties as evidenced by alterations in tertiary, secondary conformations and rheological properties during subsequent heating. These modifications appear to induce various degrees of exposure of hydrophobic and sulfhydryl groups, resulting in different gelation rates. These alterations partly explain the various gel qualities obtained and indicate the potential of HP for pre-rigor muscles.

GTP is an allosteric modulator of the interaction between the guanylate-binding protein 1 and the prosurvival kinase PIM1

GBP1 and PIM1 are known to interact with a molar ratio 1:1. GBP1:PIM1 binding initiates a signaling pathway that induces resistance to common chemotherapeutics such as paclitaxel. Since GBP1 is a large GTPase which undergoes conformational changes in a nucleotide-dependent manner, we investigated the effect of GTP/GDP binding on GBP1:PIM1 interaction by using computational and biological studies. It resulted that only GTP decreases the formation of the GBP1:PIM1 complex through an allosteric mechanism, putting the bases for the identification of new compounds potentially able to revert resistance to paclitaxel.

Current state-of-the-art molecular dynamics methods and applications

Molecular dynamics simulations are used to describe the patterns, strength, and properties of protein behavior, drug-receptor interactions, the solvation of molecules, the conformational changes that a protein or molecule may undergo under various conditions, and other events that require the systematic evaluation of molecular properties in dynamic molecular systems. Only few years ago proteins were considered to be rigid body structures with very limited conformational flexibility. However, it is now clear that proteins are highly dynamic structures, the internal organization of which is the key to their 3D spatial arrangement and hence biological function. The study of protein dynamics in the lab is a very complicated, expensive, and time-consuming process. Therefore, a lot of effort and hope lies with the computers and the in silico study of protein structure and molecular dynamics. Herein, an effort has been made to describe the ever-evolving field of molecular dynamics, the different algorithms, and force fields that are being used as well as to provide some insight on what the near future holds for this auspicious field of computational structural biology.

Conformational changes in the archaerhodopsin-3 proton pump: detection of conserved strongly hydrogen bonded water networks

Archaerhodopsin-3 (AR3) is a light-driven proton pump from Halorubrum sodomense, but little is known about its photocycle. Recent interest has focused on AR3 because of its ability to serve both as a high-performance, genetically-targetable optical silencer of neuronal activity and as a membrane voltage sensor. We examined light-activated structural changes of the protein, retinal chromophore, and internal water molecules during the photocycle of AR3. Low-temperature and rapid-scan time-resolved FTIR-difference spectroscopy revealed that conformational changes during formation of the K, M, and N photocycle intermediates are similar, although not identical, to bacteriorhodopsin (BR). Positive/negative bands in the region above 3,600 cm( - 1), which have previously been assigned to structural changes of weakly hydrogen bonded internal water molecules, were substantially different between AR3 and BR. This included the absence of positive bands recently associated with a chain of proton transporting water molecules in the cytoplasmic channel and a weakly hydrogen bonded water (W401), which is part of a hydrogen-bonded pentagonal cluster located near the retinal Schiff base. However, many of the broad IR continuum absorption changes below 3,000 cm( - 1) assigned to networks of water molecules involved in proton transport through cytoplasmic and extracellular portions in BR were very similar in AR3. This work and subsequent studies comparing BR and AR3 structural changes will help identify conserved elements in BR-like proton pumps as well as bioengineer AR3 to optimize neural silencing and voltage sensing.